Antileishmanial and Antiplasmodial Activities of Secondary Metabolites from the Root of Antrocaryon klaineanum Pierre (Anacardiaceae).

Antrocaryon klaineanum is traditionally used for the treatment of back pain, malaria, female sterility, chlamydiae infections, liver diseases, wounds, and hemorrhoid. This work aimed at investigating the bioactive compounds with antileishmanial and antiplasmodial activities from A. klaineanum. An unreported glucocerebroside antroklaicerebroside (1) together with five known compounds (2-6) were isolated from the root barks of Antrocaryon klaineanum using chromatographic techniques. The NMR, MS, and IR spectroscopic data in association with previous literature were used for the characterization of all the isolated compounds. Compounds 1-4 are reported for the first time from A. klaineanum. The methanol crude extract (AK-MeOH), the n-hexane fraction (AK-Hex), the dichloromethane fraction (AK-DCM), the ethyl acetate fraction (AK-EtOAc), and compounds 1-6 were all evaluated for their antiparasitic effects against Plasmodium falciparum strains susceptible to chloroquine (3D7), resistant to chloroquine (Dd2), and promastigotes of Leishmania donovani (MHOM/SD/62/1S). The AK-Hex, AK-EtOAc, AK-MeOH, and compound 2 were strongly active against Dd2 strain with IC50 ranging from 2.78 ± 0.06 to 9.30 ± 0.29 µg/mL. Particularly, AK-MeOH was the most active-more than the reference drugs used-with an IC50 of 2.78 ± 0.06 µg/mL. The AK-EtOAc as well as all the tested compounds showed strong antileishmanial activities with IC50 ranging from 4.80 ± 0.13 to 9.14 ± 0.96 µg/mL.

Kostchyienones A and B, new antiplasmodial and cytotoxicity of limonoids from the roots of Pseudocedrela kotschyi (Schweinf.) Harms.

Two new limonoids, kostchyienones A (1) and B (2), along with 12 known compounds 3-14 were isolated from the roots of Pseudocedrela kostchyi. Compound (7) was isolated for the first time from a natural source. Their structures were elucidated on the basis of spectroscopic evidence. Compounds 1-6 and 13-14 gave IC50 values ranging from 0.75 to 5.62 µg/mL for antiplasmodial activity against chloroquine-sensitive (Pf3D7) and chloroquine-resistant (PfINDO) strains of Plasmodium falciparum. Compound 5 showed moderate potential cytotoxicity against the HEK239T cell line with an IC50 value of 22.2±0.89 µg/mL. The antiplasmodial efficacy of the isolated compounds supports the medicinal value of this plant and its potential to provide novel antimalarial drugs.

Bioactive Seco-Lanostane-Type Triterpenoids from the Roots of Leplaea mayombensis.

Fractionation of the ethyl acetate-soluble extract of the roots of Leplaea mayombensis afforded two new 3,4-seco-lanostane-type triterpenoids, leplaeric acids A and B (1, 2), the new lanostane-type triterpenoid leplaeric acid C (3), and six known natural products (5-10). Derivatization of the main constituent, 1, afforded the dimethyl ester 4, the monoamide 11, and diamide 12 for SAR studies. The structures of these compounds were established through spectroscopic methods, and a single-crystal X-ray diffraction analysis was used to confirm the relative configuration of compound 1. These lanostane derivatives are unique since they are the first C-21-oxygenated lanostanes isolated from plant sources. Preliminary biological assays against the MDA MB 231 breast cancer cell line showed that compounds 1, 2, 4, and 11 have modest cytotoxic activity. Compound 2 was the most active, with an IC50 of 55 ± 7 µM. From these results, the amides (11, 12) derived from triterpenoid 1 were found to be less active than the derived esters (2, 4).

Trypanocidal and leishmanicidal activity of six limonoids.

Six limonoids [kotschyienone A and B (1, 2), 7-deacetylgedunin (3), 7-deacetyl-7-oxogedunin (4), andirobin (5) and methyl angolensate (6)] were investigated for their trypanocidal and leishmanicidal activities using bloodstream forms of Trypanosoma brucei and promastigotes of Leishmania major. Whereas all compounds showed anti-trypanosomal activity, only compounds 1-4 displayed anti-leishmanial activity. The 50% growth inhibition (GI50) values for the trypanocidal and leishmanicidal activity of the compounds ranged between 2.5 and 14.9 µM. Kotschyienone A (1) was found to be the most active compound with a minimal inhibition concentration (MIC) value of 10 µM and GI50 values between 2.5 and 2.9 µM. Only compounds 1 and 3 showed moderate cytotoxicity against HL-60 cells with MIC and GI50 values of 100 µM and 31.5-46.2 µM, respectively. Compound 1 was also found to show activity against intracellular amastigotes of L. major with a GI50 value of 1.5 µM. The results suggest that limonoids have potential as drug candidates for the development of new treatments against trypanosomiasis and leishmaniasis.

Effect of laser modified surface microtopochemistry on endothelial cell growth.

The introduction of microelectronics technology in the area of biological sciences has brought forth previously unforeseeable applications such as DNA or protein biochips, miniaturized, multiparametric biosensors for high performance multianalyte assays, DNA sequencing, biocomputers, and substrates for controlled cell growth (i.e. tissue engineering). We developed and investigated a new method using "cold" excimer laser beam technology combined with microlithographical techniques to create surfaces with well defined 3D microdomains in order to delineate critical microscopic surface features governing cell-material interactions. Microfabricated surfaces with microgrooves 30-3 microm deep, 10 - 1 microm wide spaced 30 microm apart were obtained with micron resolution, by "microsculpturing" polymer model surfaces using a computer controlled laser KrF excimer beam coupled with a microlithographic projection technique. The laser beam after exiting a mask was focused onto the polymer target surface via an optical setup allowing for a 10-fold reduction of the mask pattern. Various 3D micropatterned features were obtained at the micron level. Reproducible submicron features could also be obtained using this method. Subsequently, model human umbilical endothelial cells (HUVEC) were cultured on the laser microfabricated surfaces in order to study the effects of specific microscopic surface features on cell deposition and orientation. Cell deposition patterns were found to be microstructure dependant, and showed cell orientation dependency for features in the cell range dimension, a behaviour significantly different from that of a previously studied cell model (osteoprogenitor cell). This model may be a promising in so far as it is very rapid (a time frame less than a second per square centimeter of micropatterned surface) and provides further insights into the effects of surface microtopography on cell response with possible applications in the field of biosensors, biomedical and/or pharmaceutical engineering sciences.

Flowering pathway is regulated by bulb size in Lilium longiflorum (Easter lily).

Lilium longiflorum (Easter lily) vegetative propagation occurs through production of underground bulbs containing apical and axillary meristems. In addition, sexual reproduction is achieved by flowering of elongated shoots above the bulb. It is generally accepted that L. longiflorum has an obligatory requirement for vernalisation and that long day (LD) regime hastens flowering. However, the effect of bulb size and origin, with respect to axillary or apical meristems on flowering, as well as the interactions between these meristems are largely unknown. The aim of this study was to explore the effect of bulb size, vernalisation and photoperiod on L. longiflorum flowering. To this end, we applied vernalisation and photoperiod treatments to the different bulb sizes and used a system of constant ambient temperature of 25 °C, above vernalisation spectrum, to avoid cold-dependent floral induction during plant growth. Vernalisation and LD hasten flowering in all bulbs. Large, non-vernalised bulbs invariably remained at a vegetative stage. However, small non-vernalised bulbs flowered under LD conditions. These results demonstrate for the first time that cold exposure is not an obligatory prerequisite for L. longiflorum flowering, and that an alternative flowering pathway can bypass vernalisation in small bulbs. We suggest that apical dominance interactions determine the distinct flowering pathways of the apical and axillary meristems. Similar floral induction is achieved in propagated bulblets from scaling. These innovative findings in the field of geophyte floral induction represent valuable applicative knowledge for lily production.

Laser microfabricated model surfaces for controlled cell growth.

The relatively recent applications of microelectronics technology into the biological sciences arena has drastically revolutionized the field. New foreseeable applications include miniaturized, multiparametric biosensors for high performance multianalyte assays or DNA sequencing, biocomputers, and substrates for controlled cell growth (i.e. tissue engineering). The objectives of this work were to investigate a new method combining microphotolithographical techniques with laser excimer beam technology to create surfaces with well defined 3-D microdomains in order to delineate critical microscopic surface features governing material-cell interaction. Another obvious application of this study pertains to the fabrication of cell-based biosensors. Microfabricated surfaces were obtained with micron resolution, by "microsculpturing" polymer model surfaces using a laser excimer KrF beam coupled with a microlithographic projection technique. The laser beam after exiting a mask was focused onto the polymer target surface via an optical setup allowing for a 10-fold reduction of the mask pattern. Various 3-D micropatterned features were obtained at the micron level. Reproducible submicron features could also be obtained using this method. Subsequently, model osteoblast-like cells were plated onto the laser microfabricated surfaces in order to study the effects of particular surface microtopography on preferential cell deposition and orientation. Preferential cell deposition was observed on surfaces presenting "smooth" microtopographical transitions. This system may provide an interesting model for further insights into correlations between 3-D surface microtopography and cell response with new applications in the field biosensor, biomaterial and pharmaceutical engineering sciences (e.g. new cell based biosensors, controlled synthesis of immobilized cell derived active ingredients).

Impact of RGD micro-patterns on cell adhesion.

In order to avoid the problems related to biomaterial use (inflammation, infections, aseptic loosening, etc.), a new approach consisting of associating the material and autologous cells before implantation is being developed, thus requiring a perfect cooperation between the material's surface and the cell. To improve cell adhesion to biomaterials, a suitable method is to functionalize their surface by pro-adhesive ligand grafting. The aim of this study was to covalently graft RGD containing peptides onto a poly-(ethylene terephthalate) surface in well-defined microstructures in order to control MC3T3 cell adhesion. We followed two different routes for obtaining micro-patterned materials: (1) a photoablation technique using an excimer laser and (2) a photolithography process. The resulting patterns were characterized by optical microscopy, scanning electron microscopy, optical profilometry and high resolution mu-imager. The biological evaluation of cell adhesion onto the micro-patterned surfaces was carried out using optical microscopy, scanning electron microscopy and fluorescence microscopy. Cells seeded onto photolithographical or photoablated micro-patterned PET exhibited an alignment with the RGD domains and appear to be connecting through pseudopods extending towards each other. Whatever the technique used to create micro-patterns, a cell alignment occurs once the thickness of the RGD line reaches approximately 100 microm. These results prove the importance of microstructured surfaces for the elaboration of tissue engineered biomaterials.

Grafted self-assembled monolayers derived from naturally occurring phenolic lipids.

Self-assembled monolayers grafted onto silicon surfaces were obtained from the hydrosilylation products by trialcoxysilanes of naturally occurring phenolic lipid allyl ethers. The as-obtained materials were characterized by various physical and physicochemical methods. Thus, contact angles of water drops showed that they possess very high hydrophobicity. Their excellent regularity was corroborated by AFM microscopy. The frequencies of the stretching CH2 infrared modes indicate the presence of alkyl chains mainly in the trans/trans conformation. Additionally, optical ellipsometry and quartz microbalance measurements enabled us to estimate the thickness of the films. The results, as a whole, are in good agreement with the formation of densely packed monolayers.

Fabrication of refractive microlens arrays by excimer laser ablation of amorphous Teflon.

The fabrication of refractive microlens arrays by the technique of excimer laser ablation of doped amorphous Teflon combined with the subsequent annealing and melting of the produced polymer islands is described. The microlenses obtained are optically clear from the far UV (190 m) to the near IR (2000 nm) and are of good optical quality. They vary in size from 50 to 385 µm in diameter with numerical apertures between 0.2 and 0.3. Utilization of these microlenses for material processingby excimer lasers at 193 nm is demonstrated, and possible applications are discussed.

Quality assurance strategies in U.S. and Canadian psychiatry.

Quality Assurance Strategies in Psychiatry and Medicine in general have developed rapidly and have been applied widely in the last few years, particularly in the United States. This paper reviews some of those developments both from a methodological and a socio-political point of view. The relevance to the Canadian scene is evaluated, and it is concluded that, although quality assurance is now accepted as an obligation of the health profession, some of the strategies being widely applied in the United States are of questionable value in themselves, and some, particularly cost control techniques, would seem to be irrelevant to the Canadian health field which already has a variety of checks and balances in its universal health insurance system. Though cost control and quality control logically overlap, at times they are allowed to merge and cause conceptual confusion. Finally, as systems are developed in Canada, it is suggested that a means of self-assessment be built in so that the validity and reliability are not in doubt.

Microlenses fabricated by ultraviolet excimer laser irradiation of poly(methyl methacrylate) followed by styrene diffusion.

A new technique of microlens array fabrication based on the use of excimer laser radiation is described. Poly(methyl methacrylate) (PMMA) substrates are treated with many low-energy KrF laser pulses and exposed to styrene vapor. The irradiated material swells, producing spherical microlenses that are stabilized by UV polymerization. The chemistry of this process and the optical quality of the lenses are discussed.