Switching between Nonisoenergetic Dynamic Covalent Reactions Using Host-Guest Chemistry.

CO2 reacts with simple amines in the presence of water to generate dynamic combinatorial libraries of majority (i.e., ammonium carbamates) and minority (i.e., ammonium carbonates) nonisoenergetic covalent adducts. Over the past two decades, our laboratory has reported on a new class of cavitands, namely, dyn[n]arenes, from which a polyanionic macrocycle is a highly efficient receptor for linear polyammoniums that forms [2]pseudorotaxanes in water at neutral pH. Herein, we demonstrate that the formation of [2]pseudorotaxanes shifts the equilibrium of CO2 capture by polyamines in water toward the quasi-exclusive formation of carbonate adducts, providing the first example of a switch between two competitive and reversible covalent processes triggered by host-guest interactions. In addition, this supramolecular approach to CO2 capture exhibits enhanced capture efficiency by increasing the state of protonation of complexed vs uncomplexed polyamines. Altogether, we report here that a templating approach can divert the outcome of two reversible covalent chemistries involving nucleophilic additions and acid-base reactions, challenging therefore the common knowledge that noncovalent and covalent bonds operate in separate energy frames.

Efficient Electrochemical Reduction of CO2 to Formate in Methanol Solutions by Mn-Functionalized Electrodes in the Presence of Amines.

Carbon cloth electrode modified by covalently attaching a manganese organometallic catalyst is used as cathode for the electrochemical reduction of CO2 in methanol solutions. Six different industrial amines are employed as co-catalyst in millimolar concentrations to deliver a series of new reactive system. While such absorbents were so far believed to provide a CO2 reservoir and act as sacrificial proton source, we herein demonstrate that this role can be played by methanol, and that the adduct formed between CO2 and the amine can act as an effector or inhibitor toward the catalyst, thereby enhancing or reducing the production of formate. Pentamethyldiethylentriamine (PMDETA), identified as the best effector in our series, converts CO2 in wet methanolic solution into bisammonium bicarbonate. Computational studies revealed that this adduct is responsible for a barrierless transformation of CO2 to formate by the reduced form of the Mn catalyst covalently bonded to the electrode surface. As a consequence, selectivity can be switched on demand from CO to formate anion, and in the case of (PMDETA) an impressive TONHCOO- of 2.8×104 can be reached. This new valuable knowledge on an integrated capture and utilization system paves the way toward more efficient transformation of CO2 into liquid fuel.

Dynamic Covalent Chemistry of Carbon Dioxide: Opportunities to Address Environmental Issues.

Extraction and purification of basic chemicals from complex mixtures has been a persistent issue throughout the development of the chemical sciences. The chemical industry and academic research have grown over the centuries by following a deconstruction-reconstruction approach, reminiscent of the metabolism process. Chemists have designed and optimized extraction, purification, and transformation processes of molecules from natural deposits (fossil fuels, biomass, ores), in order to reassemble them into complex adducts. These highly selective and cost-effective techniques arose from developments in physical chemistry but also in supramolecular chemistry, long before the term was even coined. Thanks to the extremely diverse toolbox currently available to the scientific community, artificial molecular systems of increasing complexity can be built and integrated into high-technology products. If humanity has proven through the ages how gifted it can be at this deconstruction-reconstruction game, which has transformed the natural world to a human-shaped one, it has been confronted for more than a century by a new challenge: the deconstruction and reconstruction from a new type of deposit, the waste resulting from the mass production of disposable manufactured goods. In this Account, we will explore the potential contribution of controlled molecular and supramolecular self-assembly phenomena to the challenge of selective and efficient capture of valuable target molecules from mixtures found in postconsumer waste. While it may appear paradoxical to add more molecular ingredients to an already compositionally complex system in order to address a purification issue, we will compare the selectivity, yield, and cost of such an atypical procedure with traditional physical techniques. In the context of carbon dioxide capture or release, we will specifically focus on the coupling between this reversible covalent fixation of the gas by amines and an additional chemical equilibrium. This equilibrium may involve covalent or noncovalent bond formation between a supplementary species and either the unloaded reactant or the CO2-loaded product. Thereby, this new reactive species may act as a CO2 capture agonist or antagonist by either thermodynamically favoring the carbamation or decarbamation direction. Indeed, superagonism, the increase of CO2 loading per amine site upon carbamation beyond the theoretical limit of 0.5, can be achieved using tightly bound cationic metal counterions. In all cases, upon binding and adduct formation, a mutual selection process occurs between one member of the CO2-based dynamic combinatorial library and one agonist or antagonist, which can itself be contained in a complex mixture of analogues. If this adduct is the only species that, upon formation, can self-aggregate into a separate solid phase, selection and binding are accompanied by translocation, rendering the purification procedure operationally straightforward. This general strategy, based on a simple design of coupled molecular systems, may easily be implemented within new, disruptive technologies for selective extraction of target molecules, thereby providing a substantial environmental and economic benefit.

On-Demand Cyclophanes: Substituent-Directed Self-Assembling, Folding, and Binding.

A family of p-cyclophanes based on bis- or tetrafunctionalized 1,4-bisthiophenol units linked by disulfide bridges was obtained by self-assembly on a gram scale and without any chromatographic purification. The nature of the functionalities borne by these so-called dyn[4]arenes plays a crucial role on their structural features as well as their molecular recognition abilities. Tuning these functions on demand yields tailored receptors for cations, anions, or zwitterions in organic or aqueous media.

H-adamantylphosphinates as universal precursors of P-stereogenic compounds.

A new family of H-adamantylphosphinates as universal precursors of P-stereogenic ligands was obtained in one step from commercial chlorophosphines. Both enantiomers of these air- and moisture-stable intermediates can easily be separated by semipreparative chiral HPLC on a gram scale and individually undergo stereoselective transformations to afford each enantiomer of a set of P-stereogenic compounds such as secondary phosphine oxides and boron-protected monophosphines.

Tetrameric self-assembling of water-lean solvents enables carbamate anhydride-based CO2 capture chemistry.

Carbon capture, utilization and storage is a key yet cost-intensive technology for the fight against climate change. Single-component water-lean solvents have emerged as promising materials for post-combustion CO2 capture, but little is known regarding their mechanism of action. Here we present a combined experimental and modelling study of single-component water-lean solvents, and we find that CO2 capture is accompanied by the self-assembly of reverse-micelle-like tetrameric clusters in solution. This spontaneous aggregation leads to stepwise cooperative capture phenomena with highly contrasting mechanistic and thermodynamic features. The emergence of well-defined supramolecular architectures displaying a hydrogen-bonded internal core, reminiscent of enzymatic active sites, enables the formation of CO2-containing molecular species such as carbamic acid, carbamic anhydride and alkoxy carbamic anhydrides. This system extends the scope of adducts and mechanisms observed during carbon capture. It opens the way to materials with a higher CO2 storage capacity and provides a means for carbamates to potentially act as initiators for future oligomerization or polymerization of CO2.

Bare histidine-serine models: implication and impact of hydrogen bonding on nucleophilicity.

A new family of 2-hydroxyalk(en/yn)ylimidazoles has been evaluated as serine-histidine bare dyad models for the ring-opening reaction of L-lacOCA, a cyclic O-carboxyanhydride. These models were selected to unravel the implication of intramolecular hydrogen bonding and to substantiate its influence on the nucleophilicity of the alcohol moiety, as it is suspected to occur in enzyme active sites. Although designed to exclusively facilitate the preliminary step of proton transfer during the studied ring-opening reaction, these minimalistic models depicted a measureable increase in reactivity relative to the isolated fragments. A couple of reliable experimental and theoretical methods have been developed to readily monitor the strength of the intramolecular hydrogen bond in dilute solution. Results show that the folded conformers are the most nucleophilic species because of the intramolecular hydrogen bond.

Self-assembly of achiral building blocks into chiral cyclophanes using non-directional interactions.

The diastereoselective assembly of achiral constituents through a single spontaneous process into complex covalent architectures bearing multiple stereogenic elements still remains a challenge for synthetic chemists. Here, we show that such an extreme level of control can be achieved by implementing stereo-electronic information on synthetic organic building blocks and templates and that non-directional interactions (i.e., electrostatic and steric interactions) can transfer this information to deliver, after self-assembly, high-molecular weight macrocyclic species carrying up to 16 stereogenic elements. Beyond the field of supramolecular chemistry, this proof of concept should stimulate the on-demand production of highly structured polyfunctional architectures.

An ultraviolet spectrophotometric assay for the screening of sn-2-specific lipases using 1,3-O-dioleoyl-2-O-α-eleostearoyl-sn-glycerol as substrate.

In the present study, we propose a continuous assay for the screening of sn-2 lipases by using triacylglycerols (TAGs) from Aleurites fordii seed (tung oil) and a synthetic TAG containing the α-eleostearic acid at the sn-2 position and the oleic acid (OA) at the sn-1 and sn-3 positions [1,3-O-dioleoyl-2-O-α-eleostearoyl-sn-glycerol (sn-OEO)]. Each TAG was coated into a microplate well, and the lipase activity was measured by optical density increase at 272 nm due to transition of α-eleostearic acid from the adsorbed to the soluble state. The sn-1,3-regioselective lipases human pancreatic lipase (HPL), LIP2 lipase from Yarrowia lipolytica (YLLIP2), and a known sn-2 lipase, Candida antarctica lipase A (CALA) were used to validate this method. TLC analysis of lipolysis products showed that the lipases tested were able to hydrolyze the sn-OEO and the tung oil TAGs, but only CALA hydrolyzed the sn-2 position. The ratio of initial velocities on sn-OEO and tung oil TAGs was used to estimate the sn-2 preference of lipases. CALA was the enzyme with the highest ratio (0.22 ± 0.015), whereas HPL and YLLIP2 showed much lower ratios (0.072 ± 0.026 and 0.038 ± 0.016, respectively). This continuous sn-2 lipase assay is compatible with a high sample throughput and thus can be applied to the screening of sn-2 lipases.

In vitro stereoselective hydrolysis of diacylglycerols by hormone-sensitive lipase.

Hormone-sensitive lipase (HSL) contributes importantly to the mobilization of fatty acids in adipocytes and shows a substrate preference for the diacylglycerols (DAGs) originating from triacylglycerols. To determine whether HSL shows any stereopreference during the hydrolysis of diacylglycerols, racemic 1,2(2,3)-sn-diolein was used as a substrate and the enantiomeric excess (ee%) of residual 1,2-sn-diolein over 2,3-sn-diolein was measured as a function of DAG hydrolysis. Enantiomeric DAGs were separated by performing chiral-stationary-phase HPLC after direct derivatization from lipolysis product extracts. The fact that the ee% of 1,2-sn-diolein over 2,3-sn-diolein increased with the level of hydrolysis indicated that HSL has a preference for 2,3-sn-diolein as a substrate and therefore a stereopreference for the sn-3 position of dioleoylglycerol. The ee% of 1,2-sn-diolein reached a maximum value of 36% at 42% hydrolysis. Among the various mammalian lipases tested so far, HSL is the only lipolytic carboxylester hydrolase found to have a pronounced stereospecificity for the sn-3 position of dioleoylglycerol.

CO2 binding by dynamic combinatorial chemistry: an environmental selection.

We now report that a dynamic combinatorial selection approach can quantitatively provide, from trivial building blocks, an architecturally complex organic material, in which carbon dioxide is reversibly but covalently incorporated as a guest with a mass content of 20%. Solid-state analyses combined with covalent disconnection and quantization of the liberated components allowed identification of a three-component monomeric unit repeated within a range of assembled oligomeric adducts whose repartition and binding capacity can be finely tuned through the starting stoichiometries. The self-assembly of these architectures occurs through the simultaneous creation of more than 25 covalent bonds per molecular entity. It appears that the thermodynamic selection is directed by the packing efficiency of these adducts, explaining the spectacular building block discrimination between homologues differing by one carbon unit. This selectivity, combined with the reversible nature of the system, provided pure molecular building blocks after a simple chemical disconnection, promoting CO(2) as a green auxiliary to purify polyaldehyde or polyamine from mixtures of homologous structures. Moreover, the gas template could be expelled as a pure compound under thermodynamic control. This cooperative desorption process yielded back the initial libraries of high molecular diversity with a promising reduction of the energetic costs of capture and recycling.

Simultaneous CO2 capture and metal purification from waste streams using triple-level dynamic combinatorial chemistry.

A reduction in CO2 emissions is required to mitigate global warming. Post-combustion carbon capture is one of the most developed technologies that has the potential to meet this goal, but its cost prevents its widespread use. A different approach would be to use CO2 directly as it is captured, before it is stored. Here we explore spontaneous CO2 fixation by industrial polyamines as a strategy to generate dynamic libraries of ligands for metal separation and recovery. We identify the CO2 loadings and solvents promoting the optimal precipitation of each metal from the dynamic libraries of complexes. We demonstrate the separation of lanthanum and nickel using the exhaust gas of an internal combustion engine vehicle, and show that the three metal constituents of the La2Ni9Co alloys used to manufacture the batteries of electric vehicles can be separated and recovered by successive CO2-induced selective precipitations. Beyond the concept of CO2-sourced multi-level dynamic coordination chemistry, this study provides a potential framework for integrated CO2 capture and use through sustainable processes.

The dark side of disulfide-based dynamic combinatorial chemistry.

During the last two decades, disulfide-based dynamic combinatorial chemistry has been extensively used in the field of molecular recognition to deliver artificial receptors for molecules of biological interest. Commonly, the nature of library members and their relative amounts are provided from HPLC-MS analysis of the libraries, allowing the identification of potential binders for a target (bio)molecule. By re-investigating dynamic combinatorial libraries generated from a simple 2,5-dicarboxy-1,4-dithiophenol building block in water, we herein demonstrated that multiple analytical tools were actually necessary in order to comprehensively describe the libraries in terms of size, stereochemistry, affinity, selectivity, and finally to get a true grasp on the different phenomena at work within dynamic combinatorial systems.

Dendrigraft of Poly-l-lysine as a Promising Candidate To Reverse Heparin-based Anticoagulants in Clinical Settings.

By using a combination of experimental and computational experiments, we demonstrated that a second-generation dendrigraft of poly-l-lysine neutralizes the anticoagulant activity of unfractionated heparin, low-molecular-weight heparin, and fondaparinux more efficiently than protamine does in human plasma, making this synthetic polymer a promising surrogate of this problematic protein in clinical settings.

Wetting the lock and key enthalpically favours polyelectrolyte binding.

By using a combination of readily accessible experimental and computational experiments in water, we explored the factors governing the association between polyanionic dyn[4]arene and a series of α,ω-alkyldiammonium ions of increasing chain length. We found that the lock-and-key concept based on the best match between the apolar and polar regions of the molecular partners failed to explain the observed selectivities. Instead, the dissection of the energetic and structural contributions demonstrated that the binding events were actually guided by two crucial solvent-related phenomena as the chain length of the guest increases: the expected decrease of the enthalpic cost of guest desolvation and the unexpected increase of the favourable enthalpy of complex solvation. By bringing to light the decisive enthalpic impact of complex solvation during the binding of polyelectrolytes by inclusion, this study may provide a missing piece to a puzzle that one day could display the global picture of molecular recognition in water.

Purification and biochemical characterization of the LIP2 lipase from Yarrowia lipolytica.

The LIP2 lipase from the yeast Yarrowia lipolytica (YLLIP2) was obtained from two genetically modified strains with multi-copies of the lip2 gene and further purified using gel filtration and cation exchange chromatography. Four YLLIP2 isoforms were identified and subjected to N-terminal amino-acid sequencing and mass spectrometry analysis. These isoforms differed in their glycosylation patterns and their molecular masses ranged from 36,874 to 38,481 Da, whereas the polypeptide mass was 33,385 Da. YLLIP2 substrate specificity was investigated using short (tributyrin), medium (trioctanoin) and long (olive oil) chain triglyceride substrates at various pH and bile salt concentrations, and compared with those of human gastric and pancreatic lipases. YLLIP2 was not inhibited by bile salts at micellar concentrations with any of the substrates tested, and maximum specific activities were found to be 10,760+/-115 U/mg on tributyrin, 16,920+/-480 U/mg on trioctanoin and 12,260+/-700 U/mg on olive oil at pH 6.0. YLLIP2 was found to be fairly stable and still active on long chain triglycerides (1590+/-430 U/mg) at pH 4.0, in the presence of bile salts. It is therefore a good candidate for use in enzyme replacement therapy as a means of treating pancreatic exocrine insufficiency.

Diastereoselective Synthesis of a Dyn[3]arene with Distinct Binding Behaviors toward Linear Biogenic Polyamines.

The extension of the family of dyn[ n]arenes toward a three-membered macrocycle is reported. Through a templated approach, a single diastereoisomer of a dyn[3]arene that bears six carboxyl groups could be isolated by precipitation in 59-63% yield and excellent purity (≥95%). A combination of experimental and computational experiments in water at physiological pH revealed that the macrocycle could bind parent biogenic polyamines with a unique diversity of surface-binding modes. Whereas no binding event could be accurately measured with 1,3-diaminopropane, spermidine formed a classical stoichiometric complex with the dyn[3]arene in the millimolar concentration range. On the other hand, the data obtained for spermine could only be attributed to a more complex binding event with the formation of a 2:1 complex at high [host]/[guest] ratios and redistribution toward a 1:1 complex upon further addition of guest.

Chirality sensing and discrimination of lysine derivatives in water with a dyn[4]arene.

The asymmetric deformation of a dyn[4]arene upon the binding of various lysine derivatives leads to distinct induced circular dichroism outputs in buffered water, which can be exploited not only for the determination of their enantiomeric excesses, but also for their classification by linear discriminant analysis.

Structure elucidation of a complex CO2-based organic framework material by NMR crystallography.

A three-dimensional structural model of a complex CO2-based organic framework made from high molecular weight, self-assembled, flexible and multi-functional oligomeric constituents has been determined de novo by solid-state NMR including DNP-enhanced experiments. The complete assignment of the 15N, 13C and 1H resonances was obtained from a series of two-dimensional through space and through bond correlation experiments. MM-QM calculations were used to generate different model structures for the material which were then evaluated by comparing multiple experimental and calculated NMR parameters. Both NMR and powder X-ray diffraction were evaluated as tools to determine the packing by crystal modelling, and at the level of structural modelling used here PXRD was found not to be a useful complement. The structure determined reveals a highly optimised H-bonding network that explains the unusual selectivity of the self-assembly process which generates the material. The NMR crystallography approach used here should be applicable for the structure determination of other complex solid materials.

Slowing down fat digestion and absorption by an oxadiazolone inhibitor targeting selectively gastric lipolysis.

Based on a previous study and in silico molecular docking experiments, we have designed and synthesized a new series of ten 5-Alkoxy-N-3-(3-PhenoxyPhenyl)-1,3,4-Oxadiazol-2(3H)-one derivatives (RmPPOX). These molecules were further evaluated as selective and potent inhibitors of mammalian digestive lipases: purified dog gastric lipase (DGL) and guinea pig pancreatic lipase related protein 2 (GPLRP2), as well as porcine (PPL) and human (HPL) pancreatic lipases contained in porcine pancreatic extracts (PPE) and human pancreatic juices (HPJ), respectively. These compounds were found to strongly discriminate classical pancreatic lipases (poorly inhibited) from gastric lipase (fully inhibited). Among them, the 5-(2-(Benzyloxy)ethoxy)-3-(3-PhenoxyPhenyl)-1,3,4-Oxadiazol-2(3H)-one (BemPPOX) was identified as the most potent inhibitor of DGL, even more active than the FDA-approved drug Orlistat. BemPPOX and Orlistat were further compared in vitro in the course of test meal digestion, and in vivo with a mesenteric lymph duct cannulated rat model to evaluate their respective impacts on fat absorption. While Orlistat inhibited both gastric and duodenal lipolysis and drastically reduced fat absorption in rats, BemPPOX showed a specific action on gastric lipolysis that slowed down the overall lipolysis process and led to a subsequent reduction of around 55% of the intestinal absorption of fatty acids compared to controls. All these data promote BemPPOX as a potent candidate to efficiently regulate the gastrointestinal lipolysis, and to investigate its link with satiety mechanisms and therefore develop new strategies to "fight against obesity".