Acoustic radiation force-induced longitudinal shear wave for ultrasound-based viscoelastic evaluation.

Acoustic radiation force (ARF) is widely used to induce shear waves for evaluating the mechanical properties of biological tissues. Two shear waves can be generated when exciting with ARF: a transverse shear wave, also simply called shear wave (SW), and a longitudinal shear wave (LSW). Shear waves (SWs) have been broadly used to assess the mechanical properties. Some articles have reported that the LSW can be used to evaluate mechanical properties locally. However, existing LSW studies are mainly focused on the group velocity evaluation using optical coherence tomography (OCT). Here, we report that a LSW generated with ARF can be used to probe viscoelastic properties, including shear modulus and viscosity, using ultrasound. We took advantage of the surface boundary effect to reflect the LSW, named RLSW, to address the energy deficiency of LSW induced by ARF. We systematically evaluated the experiments with tissue-mimicking viscoelastic phantoms and validated by numerical simulations. Phase velocity and dispersion comparison between the results induced by a RLSW and a SW exhibit good agreement in both the numerical simulations and experimental results. The Kelvin-Voigt (KV) model was used to determine the shear modulus and viscosity. RLSW shows great potential to evaluate localized viscoelastic properties, which could benefit various biomedical applications such as evaluating the viscoelasticity of heterogeneous materials or microscopic lesions of tissues.

Estimation of In Vivo Human Carotid Artery Elasticity Using Arterial Dispersion Ultrasound Vibrometry.

OBJECTIVE: Arterial stiffening serves as an early indicator for a variety of cardiovascular diseases. Arterial Dispersion Ultrasound Vibrometry (ADUV) is a method that leverages acoustic radiation force to stimulate arterial wall motion, assess wave propagation characteristics, and subsequently calculate the arterial shear modulus. Previously, we introduced an inversion technique based on a guided cylindrical wave model, which proved effective in rubber tube phantom experiments. In this study, we broaden the scope of our investigation from phantom experiments to in vivo examination of common carotid arteries in human subjects, identify the challenges, and provide solutions, leading to a systematic protocol for ADUV application and robust estimation of the elastic modulus of common carotid arteries. METHODS: We achieve this by analyzing ADUV data from 59 subjects categorized as (a) confirmed atherosclerotic cardiovascular disease (n = 27), (b) with cardiovascular risk factors (n = 20), and (c) healthy (n = 12). A crucial aspect of this work is the development of metrics to differentiate high-quality ADUV data from unusable data. RESULTS AND CONCLUSIONS: With the proposed metrics, in our cohort, we observed 82% of diameter data and 78% of motion data as usable data. Future work will involve applying this protocol to a larger cohort with subsequent statistical analysis to assess and validate the resulting biomarkers.

Comb Detection for Measuring Shear Wave Propagation.

Plane wave compounding (PWC) is widely used to measure the propagation of shear waves. Implementing PWC on most commercial ultrasound scanners is challenging because all channel (>128) data must be processed or transferred to the host computing unit in real time. Comb detection transmits multiple focused beams simultaneously and results in a reduced number of receive lines to be processed in parallel. These comb beams are scanned laterally to acquire receive lines at different lateral positions in order to obtain data over a large region of interest (ROI). One of the potential issues with using multiple simultaneously transmitted beams is the issue of crosstalk between the beams. Crosstalk is analyzed through simulated beam patterns, simulated B-mode images, and motion data from shear wave elastography (SWE) experiments. Using a Hamming window on transmit and receive can suppress crosstalk to 1.2% root-mean-square error (RMSE, normalized RMSE to the peak magnitude of the reference signal) for shear wave motion signals. Four comb beams with three laterally scanned locations cover almost the entire field of view (FOV) and achieve the same frame rate as PWC with three angles. Phantom and in vivo studies demonstrate comparable motion data of comb detection to PWC in terms of motion signal quality and measured phase velocity. In addition, comb detection provides motion with lower noise and stronger signals than PWC, which is believed to be due to the advantages of transmitting focused beams rather than plane waves (PWs).

Improving Visualization of Osteochondritis Dissecans Using Delay-Multiply-and-Sum Reconstruction.

OBJECTIVE: Osteochondritis dissecans (OCD) of the capitellum is a joint defect that is common among adolescent athletes. It is important to diagnose OCD as early as possible, because early-stage OCD lesions have a high rate of spontaneous healing with rest. Medical ultrasound could potentially be used as a screening tool for OCD but is limited by the use of delay-and-sum (DAS) reconstruction. In this study, we tested conventional delay-multiply-and-sum (DMAS) and novel low-pass DMAS reconstruction algorithms for better visualization of OCD lesions. METHODS: We created phantom and cadaveric OCD models that simulated a range of OCD lesion severities and stabilities. We also imaged an in vivo case of OCD in a patient study. In the reconstructed images, several profiles were taken to measure OCD lesion contrast, cartilage contrast, crack thickness error and bone interface clarity. RESULTS: In the phantom and cadaveric OCD models, we found that histogram-matched conventional DMAS reconstruction improved lesion contrast by up to 16%, cartilage contrast by 26% and bone interface clarity by 15% on average compared with DAS reconstruction. Histogram-matched low-pass DMAS reconstruction improved lesion contrast by up to 22%, cartilage contrast by 45%, and bone interface clarity by 29% on average compared with DAS reconstruction. In the in vivo case of OCD, we found that histogram-matched conventional and low-pass DMAS reconstruction improved lesion contrast by 22% and 26%, respectively. CONCLUSION: The application of DMAS reconstruction improved the ability of medical ultrasound to detect OCD lesions of the capitellum when compared with DAS reconstruction.

A New Plane Wave Compounding Scheme Using Phase Compensation for Motion Detection.

Plane wave (PW) transmission has enabled multiple new applications, such as shear wave elastography, ultrafast Doppler imaging, and functional ultrasound imaging. PW compounding (PWC), which coherently sums the echo signals from multiple PW transmits with different angles, is widely used to improve B-mode image quality. When the motion between two speckle images is estimated, PWC suffers from an inherent displacement estimation error. This is derived theoretically and experimentally demonstrated in this work. We show that the phase difference between the acquired data with PW emissions with different angles is related to this error. When the absolute value of the phase difference is larger than π /2, the displacement estimation error occurs. A new scheme, named initial-phase-compensated PWC (IPCPWC), is proposed, which compensates the phase of echo signals from each PW transmit and maintains the absolute value of the phase difference smaller than π /2. The increased signal-to-noise ratio and reduced jitter of IPCPWC in motion data are demonstrated using tissue mimicking phantoms compared with PWC.

Measurement of wave propagation through a tube using dual transducers for elastography in arteries.

Objective.Measuring waves induced with acoustic radiation force (ARF) in arteries has been studied over the last decade. To date, it remains a challenge to quantitatively assess the local arterial biomechanical properties. The cylindrical shape and waveguide behavior of waves propagating in the arterial wall pose complexities to determining the mechanical properties of the artery.Approach. In this paper, an artery-mimicking tube in water is examined utilizing three-dimensional measurements. The cross-section of the tube is measured while a transducer is translated over 41 different positions along the length of the tube. Motion in the radial direction is calculated using two components of motion which are measured from the two orthogonal views of the cross-section. This enables more accurate estimation of motion along the circumference of tube.Main results. The results provide more information to categorize the motion in tube wall into two types of responses: a transient response and a steady state response. The transient response is caused by ARF application and the waves travel along the length of the tube for a relatively short period of time. This corresponds to the axial and circumferential propagating waves. The two circumferential waves travel along the circumference of tube in CW (clockwise) and CCW (counter-clockwise) direction and result in a standing wave. By using a directional filter, the two waves were successfully separated, and their propagation was more clearly visualized. As a steady state response, a circumferential mode is generated showing a symmetric motion (i.e. the proximal and distal walls move in the opposite direction) following the transient response.Significance.This study provides a more comprehensive understanding of the waves produced in an artery-mimicking tube with ARF application, which will provide opportunities for improving measurement of arterial mechanical properties.

A Robust and Fast Method for 2-D Shear Wave Speed Calculation.

We developed a new method, called the tangent plane method (TPM), for more efficiently and accurately estimating 2-D shear wave speed (SWS) from any direction of wave propagation. In this technique, we estimate SWS by solving the Eikonal equation because this approach is more robust to noise. To further enhance the performance, we computed the tangent plane of the arrival time surface. To evaluate the approach, we performed simulations and also conducted phantom studies. Simulation studies showed that TPM was more robust to noise than the conventional methods such as 2-D cross correlation (CC) and the distance method. The contrast/CNR for an inclusion (69 kPa; manufacturer provided stiffness) of a phantom is 0.54/4.17, 0.54/1.82, and 0.46/1.22. SWS results [mean and standard deviation (SD)] were 4.41 ± 0.49, 4.62 ± 0.85, and 3.66 ± 0.99 m/s, respectively, while the manufacturer's reported value (mean and range) is 4.81 ± 0.49 m/s. This shows that TPM has the higher CNR and lower SD than other methods. To increase the computation speed, an iterative version of TPM (ITPM) was also developed, which calculated the time-of-flight iteratively. ITPM reduced the computation time to 3.6%, i.e., from 748 to 27 s. In vivo case analysis demonstrated the feasibility of using the conventional ultrasound scanner for the proposed 2-D SWS algorithms.

Toward improved accuracy in shear wave elastography of arteries through controlling the arterial response to ultrasound perturbation in-silico and in phantoms.

Dispersion-based inversion has been proposed as a viable direction for materials characterization of arteries, allowing clinicians to better study cardiovascular conditions using shear wave elastography. However, these methods rely ona prioriknowledge of the vibrational modes dominating the propagating waves induced by acoustic radiation force excitation: differences between anticipated and real modal content are known to yield errors in the inversion. We seek to improve the accuracy of this process by modeling the artery as a fluid-immersed cylindrical waveguide and building an analytical framework to prescribe radiation force excitations that will selectively excite certain waveguide modes using ultrasound acoustic radiation force. We show that all even-numbered waveguide modes can be eliminated from the arterial response to perturbation, and confirm the efficacy of this approach within silicotests that show that odd modes are preferentially excited. Finally, by analyzing data from phantom tests, we find a set of ultrasound focal parameters that demonstrate the viability of inducing the desired odd-mode response in experiments.

Addition of Reliability Measurement Index to Point Shear Wave Elastography: Prospective Validation via Diagnostic Performance and Reproducibility.

The clinical value of the reliability measurement index (RMI), newly added to point shear wave elastography (pSWE), was investigated. Forty-nine patients underwent both pSWE providing RMI (range: 0.0-1.0) and transient elastography (TE) before hepatic surgery. Interclass correlation coefficients (ICCs) between the median of the first two to nine measurements (as categorized by RMI values ≥0.0 (liver stiffness-reliability measurement index [LS-RMI] 0.0), ≥0.4 (LS-RMI 0.4) and ≥0.7 (LS-RMI 0.7) and the median of 10 consecutive measurements (LS-REF) were obtained. Compared with LS-REF, minimums of 7 LS-RMI 0.0, 5 LS-RMI 0.4 and 3 LS-RMI 0.7 measurements were required to obtain an ICC ≥0.95 with high inter-observer agreement (ICC ≥0.90). Diagnostic performance did not differ (p values >0.05) using these reduced numbers of LS measurements. Significant correlations were found between the reduced number of LS measurements and TE or METAVIR (p values <0.001). Therefore, RMI helped to improve reliability and reduce the number of LS measurements while maintaining the diagnostic performance of pSWE.

Principles and clinical application of ultrasound elastography for diffuse liver disease.

Accurate assessment of the degree of liver fibrosis is important for estimating prognosis and deciding on an appropriate course of treatment for cases of chronic liver disease (CLD) with various etiologies. Because of the inherent limitations of liver biopsy, there is a great need for non-invasive and reliable tests that accurately estimate the degree of liver fibrosis. Ultrasound (US) elastography is considered a non-invasive, convenient, and precise technique to grade the degree of liver fibrosis by measuring liver stiffness. There are several commercial types of US elastography currently in use, namely, transient elastography, acoustic radiation force impulse imaging, supersonic shear-wave imaging, and real-time tissue elastography. Although the low reproducibility of measurements derived from operator-dependent performance remains a significant limitation of US elastography, this technique is nevertheless useful for diagnosing hepatic fibrosis in patients with CLD. Likewise, US elastography may also be used as a convenient surveillance method that can be performed by physicians at the patients' bedside to enable the estimation of the prognosis of patients with fatal complications related to CLD in a non-invasive manner.

Heart Rate Monitor for Portable MP3 Player.

This paper presents a photoplethysmography sensor based on a heart rate monitor for a portable MP3 player. Two major design issues are addressed: one is to acquire the sensor signal with a proper amplitude despite a wide range of variation and the other is to handle the noise contaminated signal which is caused by a motion artifact. A benchmarking test with a professional medical photoplethysmography sensor shows that our device performs very well in calculating heart rate even though our photoplethysmography sensor module was designed to be cost effective.

Method of measuring calorie consumption for portable apparatus.

A measuring device for use in measuring calorie consumption includes a pulse input unit which detects a first heart rate of the user at a first point in an exercise period and a second heart rate of the user at a second point of the exercise period other than the first point, the pulse input unit not detecting a third heart rate between the first and second heart rates; and a controller which receives the detected first and second heart rates and calculates calories consumed using the detected first heart rate, the detected second heart rate, an at rest heart rate of the user, and one or more of an age, gender, weight, height and an at rest heart rate of the user. The measuring device is usable in a portable device, such as a portable digital audio and/or video reproducing apparatus.

Development stress monitoring system based on personal digital assistant (PDA).

We have developed nonintrusive type stress monitoring system based on the PDA (Personal Digital Assistance). This system separated sensing part of the physiological signal and estimating part of the stress states. First, sensing part consists of four electrodes such as one PPG electrode, two EDA electrodes and one SKT electrode. Sensing part was able to measuring heart rate, skin temperature variation, and electrodermal activity, all of which can be acquired without discomfort from finger. Second, estimating part was developed and verified for physiological signal database that was obtained from multiple subjects by presenting stress stimuli that were elaborated to effectively induce stress. This system is a useful measure of human stress in portabel device as PDA and smart phone.