Molecular mapping and candidate gene identification of two major quantitative trait loci associated with silique length in oilseed rape (Brassica napus L.).

Rapeseed is a significant global source of plant oil. Silique size, particularly silique length (SL), impacts rapeseed yield. SL is a typical quantitative trait controlled by multiple genes. In our previous study, we constructed a DH population of 178 families known as the 158A-SGDH population. In this study, through SL QTL mapping, we identified twenty-six QTL for SL across five replicates in two environments. A QTL meta-analysis revealed eight consensus QTL, including two major QTL: cqSL.A02-1 (11.32-16.44% of PVE for SL), and cqSL.C06-1 (10.90-11.95% of PVE for SL). Based on biparental resequencing data and microcollinearity analysis of target regions in Brassica napus and Arabidopsis, we identified 11 candidate genes at cqSL.A02-1 and 6 candidate genes at cqSL.C06-1, which are potentially associated with silique development. Furthermore, transcriptome analysis of silique valves from both parents on the 14th, 21st, and 28th days after pollination (DAP) combined with gene function annotation revealed three significantly differentially expressed genes at cqSL.A02-1, BnaA02G0058500ZS, BnaA02G0060100ZS, and BnaA02G0060900ZS. Only the gene BnaC06G0283800ZS showed significant differences in parental transcription at cqSL.C06-1. Two tightly linked insertion-deletion markers for the cqSL.A02-1 and cqSL.C06-1 loci were developed. Using these two QTL, we generated four combinations: A02SGDH284C06158A, A02SGDH284C06SGDH284, A02158AC06158A, and A02158AC06SGDH284. Subsequent analysis identified an ideal QTL combination, A02158AC06SGDH284, which exhibited the longest SL of this type, reaching 6.06 ± 0.10 cm, significantly surpassing the other three combinations. The results will provide the basis for the cloning of SL-related genes of rapeseed, along with the development of functional markers of target genes and the breeding of rapeseed varieties. Supplementary Information: The online version contains supplementary material available at 10.1007/s11032-024-01464-x.

Sef1, rapid-cycling Brassica napus for large-scale functional genome research in a controlled environment.

KEY MESSAGE: We demonstrated a short-cycle B. napus line, Sef1, with a highly efficient and fast transformation system, which has great potential in large-scale functional gene analysis in a controlled environment. Rapeseed (Brassica napus L.) is an essential oil crop that accounts for a considerable share of global vegetable oil production. Nonetheless, studies on functional genes of B. napus are lagging behind due to the complicated genome and long growth cycle, this is largely due to the limited availability of gene analysis and modern genome editing-based molecular breeding. In this study, we demonstrated a short-cycle semi-winter-type Brassica napus 'Sef1' with very early-flowering and dwarf phenotype, which has great potential in large-scale indoor planting. Through the construction of an F2 population of Sef1 and Zhongshuang11, bulked segregant analysis (BSA) combined with the rape Bnapus50K SNP chip assay method was used to identify the early-flowering genes in Sef1, and a mutation in BnaFT.A02 was identified as a major locus significantly affecting the flowering time in Sef1. To further investigate the mechanism of early flowering in Sef1 and discover its potential in gene function analysis, an efficient Agrobacterium-mediated transformation system was established. The average transformation efficiency with explants of hypocotyls and cotyledons was 20.37% and 12.8%, respectively, and the entire transformation process took approximately 3 months from explant preparation to seed harvest of transformed plants. This study demonstrates the great potential of Sef1 for large-scale functional gene analysis.

Genome-wide identification of cold responsive transcription factors in Brassica napus L.

BACKGROUND: Cold stress is one of the primary environmental factors that affect plant growth and productivity, especially for crops like Brassica napus that live through cold seasons. Till recently, although a number of genes and pathways involved in B. napus cold response have been revealed by independent studies, a genome-wide identification of the key regulators and the regulatory networks is still lack. In this study, we investigated the transcriptomes of cold stressed semi-winter and winter type rapeseeds in short day condition, mainly with the purpose to systematically identify the functional conserved transcription factors (TFs) in cold response of B. napus. RESULTS: Global modulation of gene expression was observed in both the semi-winter type line (158A) and the winter type line (SGDH284) rapeseeds, in response to a seven-day chilling stress in short-day condition. Function analysis of differentially expressed genes (DEGs) revealed enhanced stresses response mechanisms and inhibited photosynthesis in both lines, as well as a more extensive inhibition of some primary biological processes in the semi-winter type line. Over 400 TFs were differentially expressed in response to cold stress, including 56 of them showed high similarity to the known cold response TFs and were consistently regulated in 158A and SGDH284, as well as 25 TFs which targets were over-represented in the total DEGs. A further investigation based on their interactions indicated the critical roles of several TFs in cold response of B. napus. CONCLUSION: In summary, our results revealed the alteration of gene expression in cold stressed semi-winter and winter ecotype B. napus lines and provided a valuable collection of candidate key regulators involved in B. napus response to cold stress, which could expand our understanding of plant stress response and benefit the future improvement of the breed of rapeseeds.

Biochar and arbuscular mycorrhizal fungi promote rapid-cycling Brassica napus growth under cadmium stress.

PURPOSE: To explore the mechanisms of tolerance of Brassica napus to ultra-high concentration cadmium pollution and the synergistic effects of biochar (BC) and Arbuscular mycorrhizal fungi (AMF) on plant growth under cadmium (Cd) stress. RESULTS: The application of 5 % BC and inoculation with 10 g AMF significantly promoted the growth and development of B. napus. The combined application of BC and AMF (BC1A and BC2A) was better than the single application. At the Cd 200 mg/kg level, BC1A increased the fresh weight and Cd content of the above-ground parts of B. napus by 35.5 % and decreased by 21.20 %. The SOD and POD activities increased by 30.63 % and 73.37 %. The MDA and H2O2 contents decreased by 40.8 % and 69.99 %, soluble sugar content increased by 37.96 %. At the Cd 300 mg/kg level, BC1A increased the fresh weight and Cd content of the above-ground parts of B. napus by 32.8 % and decreased by 15.99 %. The SOD and POD activities increased by 39.06 % and 93.56 %. The MDA and H2O2 contents decreased by 28.39 % and 72.45 %, and the soluble sugar content increased by 21.16 %. Overall, both BC and AMF treatments alone or in combination (BC1A) were able to alleviate Cd stress and promote plant growth, with the combination of biochar and AMF being the most effective. Furthermore, transcriptome analyses indicated that BC may improve cadmium resistance in B. napus by significantly up-regulating the expression of genes related to peroxidase, photosynthesis, and plant MAPK signaling pathways. AMF may alleviate the toxicity of Cd stress on B. napus by up-regulating the expression of genes related to peroxisomes, phytohormone signaling, and carotenoid biosynthesis. The results of the study will provide support for ecological restoration technology in extremely heavy metal-polluted environments and provide some reference for the application and popularization of BC and AMF conjugation technology.

Mapping of Two Major QTLs Controlling Flowering Time in Brassica napus Using a High-Density Genetic Map.

Research on the flowering habit of rapeseed is important for the selection of varieties adapted to specific ecological environments. Here, quantitative trait loci (QTL) for the days-to-flowering trait were identified using a doubled haploid population of 178 lines derived from a cross between the winter type SGDH284 and the semi-winter type 158A. A linkage map encompassing 3268.01 cM was constructed using 2777 bin markers obtained from next-generation sequencing. The preliminary mapping results revealed 56 QTLs for the days to flowering in the six replicates in the three environments. Twelve consensus QTLs were identified by a QTL meta-analysis, two of which (cqDTF-C02 and cqDTF-C06) were designated as major QTLs. Based on the micro-collinearity of the target regions between B. napus and Arabidopsis, four genes possibly related to flowering time were identified in the cqDTF-C02 interval, and only one gene possibly related to flowering time was identified in the cqDTF-C06 interval. A tightly linked insertion-deletion marker for the cqFT-C02 locus was developed. These findings will aid the breeding of early maturing B. napus varieties.

Increased planting density combined with reduced nitrogen rate to achieve high yield in maize.

The combination effects of nitrogen (N) fertilizer and planting density on maize yield, N use efficiency and the characteristics of canopy radiation capture and radiation use efficiency are not well documented in the Huanghuaihai Plain region in China. A 2-year field experiment was conducted from 2017 to 2018 in a split plot design with two N levels (240 and 204 kg N ha-1) applied to main plots and three plant densities (67,500, 77,625 and 87,750 plants ha-1) allocated to sub plots. Our results show that a 30% greater plant density combined with a 15% lower N rate (basal N) enhanced N partial factor productivity (NPFP) by 24.7% and maize grain yield by 6.6% compared with those of the conventional high N rate combined with a low density planting management practice. The yield increase was mainly attributed to significantly increased kernel numbers and biomass. The increased intercepted photosynthetically active radiation (IPAR) was the primary factor responsible for the high productivity of maize at increased planting density under reduced N conditions. The results indicate that increase planting density with reduced basal N application might benefit maize cropping for achieving high yields and sustainable development of agriculture.