RESUMEN
Workforce education and development are key cornerstones in advancing and maturing the Cell & Gene Therapy sector. A skilled worker shortage can significantly impact and delay progress as well as the quality of output for any developer, thereby negatively impacting a patient's access to life-saving treatments. Several roundtable discussions were held at the International Society for Cell & Gene Therapy (ISCT) 2023 Annual Meeting to dive deeper into the current state of workforce development and solutions to address this bottleneck. One roundtable discussion was co-hosted by the Alliance for Regenerative Medicine (ARM) and ISCT, which focused on the gap analysis provided for the United States Cell & Gene Therapy (CGT) sector, highlighting the lack of skilled workers in manufacturing and quality control. In this manuscript, the roundtable participants continue this conversation, review the roles and staffing requirements in both academic and industry as well as small and large company settings. The adoption of increased manufacturing automation is one promising solution to propel the sector forward. However, automation alone won't replace on-site staff, but will lower the bar to entry for a larger pool of people and require different training. This paper also addresses the workforce development and training paradigm shift as advanced manufacturing techniques are implemented, which will differ considerably based on the type of manufacturing efforts, thus emphasizing the need for a well-thought-out strategy to up-skill and re-skill the technical workforce to adapt to these advancements. Organizations such as ISCT and ARM have a role to play in propelling the field forward, providing awareness and education to stakeholders at all levels, as well as acting as a convener and participating as a key stakeholder in discussions and partnerships between academia and industry towards solutions for training the best personnel for CGT manufacturing. This scope includes novel digital tools and technologies to simplify training to increase access to new talent pools interested in careers in a rapidly advancing sector.
Asunto(s)
Terapia Genética , Humanos , Medicina Regenerativa , Tratamiento Basado en Trasplante de Células y Tejidos , Estados Unidos , Recursos HumanosRESUMEN
The maintenance of tissue integrity is essential for the life of multicellular organisms. Healing of a skin wound is a paradigm for how various cell types localize and repair tissue perturbations in an orchestrated fashion. To investigate biophysical mechanisms associated with wound localization, we focus on a model system consisting of a fibroblast monolayer on an elastic substrate. We find that the creation of an edge in the monolayer causes cytosolic calcium oscillations throughout the monolayer. The oscillation frequency increases with cell density, which shows that wound-induced calcium oscillations occur collectively. Inhibition of myosin II reduces the number of oscillating cells, demonstrating a coupling between actomyosin activity and calcium response. The spatial distribution of oscillating cells depends on the stiffness of the substrate. For soft substrates with a Young's modulus E ~ 360 Pa, oscillations occur on average within 0.2 mm distance from the wound edge. Increasing substrate stiffness leads to an average localization of oscillations away from the edge (up to ~0.6 mm). In addition, we use traction force microscopy to determine stresses between cells and substrate. We find that an increase of substrate rigidity leads to a higher traction magnitude. For E < ~2 kPa, the traction magnitude is strongly concentrated at the monolayer edge, while for E > ~8 kPa, traction magnitude is on average almost uniform beneath the monolayer. Thus, the spatial occurrence of calcium oscillations correlates with the cell-substrate traction. Overall, the experiments with fibroblasts demonstrate a collective, chemomechanical localization mechanism at the edge of a wound with a potential physiological role.
Asunto(s)
Señalización del Calcio , Piel/lesiones , Cicatrización de Heridas , Animales , Fenómenos Biomecánicos , Recuento de Células , Módulo de Elasticidad , Ratones , Miosina Tipo II , Células 3T3 NIHRESUMEN
Although the process of chemosensing by individual cells is intrisically stochastic, multicellular organisms exhibit highly regulated responses to external stimulations. Two key elements to understand the deterministic features of chemosensing are intercellular communications and the role of pacemaker cells. To characterize the collective behavior induced by these two factors, we study the spatial-temporal calcium dynamics of fibroblast cells in response to ATP stimulation. We find that closely packed cell colonies exhibit faster, more synchronized, and highly correlated responses compared to isolated cells. In addition, we demonstrate for chemosensing the existence of pacemaker cells and how the presence of gap junctions impact the first step of the collective response. By further comparing these results with the calcium dynamics of cells embedded in thin hydrogel films, where intercellular communication is only possible via diffusing molecules, we conclude that gap junctions are required for synchronized and highly correlated responses among cells in high density colonies. In addition, in high density cell colonies, both communication channels lead to calcium oscillations following the stimulation by external ATP. While the calcium oscillations associated with cells directly exposed to external flows were transient, the oscillations of hydrogel trapped cells can persist with a fundamental frequency and higher harmonics. Our observations and measurements highlight the crucial role of intercellular signaling for generating regulated spatial and temporal dynamics in cell colonies and tissues.
Asunto(s)
Adenosina Trifosfato/metabolismo , Calcio/metabolismo , Comunicación Celular/fisiología , Fibroblastos/metabolismo , Uniones Comunicantes/fisiología , Animales , Relojes Biológicos/fisiología , Recuento de Células , Hidrogel de Polietilenoglicol-Dimetacrilato , Procesamiento de Imagen Asistido por Computador , Ratones , Microscopía Fluorescente , Células 3T3 NIHRESUMEN
Human mesenchymal stem/stromal cells (hMSCs) have been investigated and proven to be a well-tolerated, safe therapy for a variety of indications, as shown by over 900 registered hMSC-based clinical trials. To meet the commercial demand for clinical manufacturing of hMSCs, production requires a scale that can achieve a lot size of ~100B cells, which requires innovative manufacturing technologies such as 3D bioreactors. A robust suspension bioreactor process that can be scaled-up to the relevant scale is therefore crucial. In this study, we developed a fed-batch, microcarrier-based bioreactor process, which enhances media productivity and drives a cost-effective and less labor-intensive hMSC expansion process. We determined parameter settings for various stages of the culture: inoculation, bioreactor culture, and harvest. Addition of a bioreactor feed, using a fed-batch approach, was necessary to replenish the mitogenic factors that were depleted from the media within the first 3 days of culture. Our study resulted in an optimized hMSC culture protocol that consistently achieved hMSC densities between 2 × 105-6 × 105 cells/mL within 5 days with no media exchange, maintaining the final cell population doubling level (PDL) at 16-20. Using multiple hMSC donors, we showed that this process was robust and yielded hMSCs that maintained expansion, phenotypic characteristic, and functional properties. The developed process in a vertical-wheel suspension bioreactor can be scaled to the levels needed to meet commercial demand of hMSCs.
RESUMEN
Selective serotonin reuptake inhibitors (SSRIs) have been shown to hinder cardiomyocyte signaling, raising concerns about their safety during pregnancy. Approaches to assess SSRI-induced effects on fetal cardiovascular cells following passage of drugs through the placental barrier in vitro have only recently become available. Herein, we report that the SSRIs, fluoxetine and sertraline, lead to slowed cardiomyocyte calcium oscillations and induce increased secretion of troponin T and creatine kinase-MB with reduced secretion of NT-proBNP, three key cardiac injury biomarkers. We show the cardiomyocyte calcium handling effects are further amplified following indirect exposure through a placental barrier model. These studies are the first to investigate the effects of placental barrier co-culture with cardiomyocytes in vitro and to show cardiotoxicity of SSRIs following passage through the placental barrier. STATEMENT OF SIGNIFICANCE: Use of selective serotonin reuptake inhibitors (SSRIs), a class of antidepressants, during pregnancy continues to rise despite multiple studies showing potential for detrimental effects on the developing fetus. SSRIs are particularly thought to slow cardiovascular electrical activity, such as ion signaling, yet few, if any, methods exist to rigorously study these drug-induced effects on human pregnancy and the developing fetus. Within this study, we utilized a placenta-fetus model to evaluate these drug-induced effects on cardiomyocytes, looking the drugs' effects on calcium handling and secretion of multiple cardiac injury biomarkers. Together, with existing literature, this study provides a platform for assessing pharmacologic effects of drugs on cells mimicking the fetus and the role the placenta plays in this process.
Asunto(s)
Feto/efectos de los fármacos , Miocitos Cardíacos/efectos de los fármacos , Placenta/efectos de los fármacos , Inhibidores Selectivos de la Recaptación de Serotonina/farmacología , Animales , Biomarcadores/metabolismo , Calcio/metabolismo , Técnicas de Cocultivo , Forma MB de la Creatina-Quinasa/metabolismo , Femenino , Fluoxetina/farmacología , Células Endoteliales de la Vena Umbilical Humana/efectos de los fármacos , Humanos , Células Madre Pluripotentes Inducidas/efectos de los fármacos , Miocardio/patología , Péptido Natriurético Encefálico/metabolismo , Oscilometría , Fragmentos de Péptidos/metabolismo , Embarazo , Inhibidores Selectivos de la Recaptación de Serotonina/efectos adversos , Sertralina/farmacología , Transducción de Señal , Trofoblastos/efectos de los fármacos , Troponina T/metabolismoRESUMEN
There is a growing interest in 3D printing to fabricate culture substrates; however, the surface properties of the scaffold remain pertinent to elicit targeted and expected cell responses. Traditional 2D polystyrene (PS) culture systems typically require surface functionalization (oxidation) to facilitate and encourage cell adhesion. Determining the surface properties which enhance protein adhesion from media and cellular extracellular matrix (ECM) production remains the first step to translating 2D PS systems to a 3D culture surface. Here we show that the presence of carbonyl groups to PS surfaces correlated well with successful adhesion of ECM proteins and sustaining ECM production of deposited human mesenchymal stem cells, if the surface has a water contact angle between 50° and 55°. Translation of these findings to custom-fabricated 3D PS scaffolds reveals carbonyl groups continued to enhance spreading and growth in 3D culture. Cumulatively, these data present a method for 3D printing PS and the design considerations required for understanding cell-material interactions. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B:2566-2578, 2019.
Asunto(s)
Células Madre Mesenquimatosas/metabolismo , Poliestirenos/química , Impresión Tridimensional , Andamios del Tejido/química , Animales , Bovinos , Humanos , Células Madre Mesenquimatosas/citología , Propiedades de SuperficieRESUMEN
3D printing plays an important role in various biomedical research applications including, but not limited to, culture systems and implantable devices. In this review, we discuss recent development in the applications of 3D printing technologies for clinically motivated research, particularly focusing on the fabrication of constructs subsequently incorporated with cells. Applications of this technology include pharmaceutical delivery, bioreactor culture platforms, acellular scaffolds, imaging modalities, and organ-on-a chip systems. Emphasis is placed on technological developments not possible without 3D printing technologies: where traditional manufacturing approaches would be cumbersome to demonstrate research objectives. The clinical applications of 3D printing are rapidly moving from the research to production phases and will certainly continue to grow, with ever increasing numbers of therapies becoming commercialized. The work discussed here holds promise for various applications in structural improvements, drug delivery, and physiology research.
RESUMEN
Polystyrene (PS) has brought in vitro cell culture from its humble beginnings to the modern era, propelling dozens of research fields along the way. This review discusses the development of the material, fabrication, and treatment approaches to create the culture material. However, native PS surfaces poorly facilitate cell adhesion and growth in vitro. To overcome this, liquid surface deposition, energetic plasma activation, and emerging functionalization methods transform the surface chemistry. This review seeks to highlight the many potential applications of the first widely accepted polymer growth surface. Although the majority of in vitro research occurs on two-dimensional surfaces, the importance of three-dimensional (3D) culture models cannot be overlooked. The methods to transition PS to specialized 3D culture surfaces are also reviewed. Specifically, casting, electrospinning, 3D printing, and microcarrier approaches to shift PS to a 3D culture surface are highlighted. The breadth of applications of the material makes it impossible to highlight every use, but the aim remains to demonstrate the versatility and potential as both a general and custom cell culture surface. The review concludes with emerging scaffolding approaches and, based on the findings, presents our insights on the future steps for PS as a tissue culture platform.
Asunto(s)
Adhesión Celular , Técnicas de Cultivo de Célula/métodos , Polímeros/química , Poliestirenos/química , Impresión Tridimensional , Ingeniería de Tejidos/métodos , Animales , HumanosRESUMEN
Stem cell cultures within perfusion bioreactors, while efficient in obtaining cell numbers, often lack the similarity to native tissues and consequently cell phenotype. We develop a three-dimensional (3D)-printed fluidic chamber for dynamic stem cell culture, with emphasis on control over flow and substrate curvature in a 3D environment, two physiologic features of native tissues. The chamber geometry, consisting of an array of vertical cylindrical pillars, facilitates actin-mediated localization of human mesenchymal stem cells (hMSCs) within â¼200 µm distance from the pillars, enabling spatial patterning of hMSCs and endothelial cells in cocultures and subsequent modulation of calcium signaling between these two essential cell types in the bone marrow microenvironment. Flow-enhanced osteogenic differentiation of hMSCs in growth media imposes spatial variations of alkaline phosphatase expression, which positively correlates with local shear stress. Proliferation of hMSCs is maintained within the chamber, exceeding the cell expansion in conventional static culture. The capability to manipulate cell spatial patterning, differentiation, and 3D tissue formation through geometry and flow demonstrates the culture chamber's relevant chemomechanical cues in stem cell microenvironments, thus providing an easy-to-implement tool to study interactions among substrate curvature, shear stress, and intracellular actin machinery in the tissue-engineered construct.
Asunto(s)
Reactores Biológicos , Diferenciación Celular , Proliferación Celular , Dispositivos Laboratorio en un Chip , Células Madre Mesenquimatosas/metabolismo , Técnicas de Cocultivo/instrumentación , Técnicas de Cocultivo/métodos , Humanos , Células Madre Mesenquimatosas/citología , Ingeniería de Tejidos/instrumentación , Ingeniería de Tejidos/métodosRESUMEN
In the past few decades, the field of tissue engineering combined with rapid prototyping (RP) techniques has been successful in creating biological substitutes that mimic tissues. Its applications in regenerative medicine have drawn efforts in research from various scientific fields, diagnostics, and clinical translation to therapies. While some areas of therapeutics are well developed, such as skin replacement, many others such as cartilage repair can still greatly benefit from tissue engineering and RP due to the low success and/or inefficiency of current existing, often surgical treatments. Through fabrication of complex scaffolds and development of advanced materials, RP provides a new avenue for cartilage repair. Computer-aided design and three-dimensional (3D) printing allow the fabrication of modeled cartilage scaffolds for repair and regeneration of damaged cartilage tissues. Specifically, the various processes of 3D printing will be discussed in details, both cellular and acellular techniques, covering the different materials, geometries, and operational printing conditions for the development of tissue-engineered articular cartilage. Finally, we conclude with some insights on future applications and challenges related to this technology, especially using 3D printing techniques to recapitulate the complexity of native structure for advanced cartilage regeneration.
Asunto(s)
Cartílago Articular , Impresión Tridimensional , Regeneración , Ingeniería de Tejidos , Andamios del TejidoRESUMEN
Cells constantly sense their chemical and mechanical environments. We study the effect of mechanics on the ATP-induced collective calcium response of fibroblast cells in experiments that mimic various tissue environments. We find that closely packed two-dimensional cell cultures on a soft polyacrylamide gel (Young's modulus E = 690 Pa) contain more cells exhibiting calcium oscillations than cultures on a rigid substrate (E = 36 000 Pa). Calcium responses of cells on soft substrates show a slower decay of calcium level relative to those on rigid substrates. Actin enhancement and disruption experiments for the cell cultures allow us to conclude that actin filaments determine the collective Ca(2+) oscillatory behaviour in the culture. Inhibition of gap junctions results in a decrease of the oscillation period and reduced correlation of calcium responses, which suggests additional complexity of signalling upon cell-cell contact. Moreover, the frequency of calcium oscillations is independent of the rigidity of the substrate but depends on ATP concentration. We compare our results with those from similar experiments on individual cells. Overall, our observations show that collective chemical signalling in cell cultures via calcium depends critically on the mechanical environment.