RESUMEN
Pigeons (Columba livia) are among a select few avian species that have developed a specialized reproductive mode wherein the parents produce a 'milk' in their crop to feed newborn squabs. Nonetheless, the transcriptomic dynamics and role in the rapid transition of core crop functions during 'lactation' remain largely unexplored. Here, we generated a de novo pigeon genome assembly to construct a high resolution spatio-temporal transcriptomic landscape of the crop epithelium across the entire breeding stage. This multi-omics analysis identified a set of 'lactation'-related genes involved in lipid and protein metabolism, which contribute to the rapid functional transitions in the crop. Analysis of in situ high-throughput chromatin conformation capture (Hi-C) sequencing revealed extensive reorganization of promoter-enhancer interactions linked to the dynamic expression of these 'lactation'-related genes between stages. Moreover, their expression is spatially localized in specific epithelial layers, and can be correlated with phenotypic changes in the crop. These results illustrate the preferential de novo synthesis of 'milk' lipids and proteins in the crop, and provides candidate enhancer loci for further investigation of the regulatory elements controlling pigeon 'lactation'.
Asunto(s)
Columbidae , Transcriptoma , Animales , Femenino , Transcriptoma/genética , Columbidae/genética , Columbidae/metabolismo , Perfilación de la Expresión Génica , Leche , LactanciaRESUMEN
High-entropy perovskite fluorides (HEPFs) have great potential in electrocatalysis that has not been realized because of the limitation of a high-temperature synthetic route and the limited understanding of high-entropy materials. The use of HEPFs in effective oxygen evolution catalysis and a feasible synthesis route for HEPFs in a boiled solution by combining a hydrothermal method with mechanochemistry are first reported here. These HEPFs consisting of cost-effective elements dramatically gave excellent catalytic activity for the oxygen evolution reaction in an alkaline media.
RESUMEN
Nanoporous TiNb2 O7 (NPTNO) material is synthesized by a sol-gel method with an ionic liquid (IL) as the nanoporous structure directing template. NPTNO exhibits a high reversible capacity of 210 mAh g-1 even at the charging rate of 50 C and an excellent cyclability of half-cell capacity retention of 74% for 1000 cycles at 5 C and LiNi0.5 Mn1.5 O4 -coupled full-cell capacity retentions of 81% and 87% for 1000 cycles at 1 C and 2 C, respectively. The studies of the 1000 cycled NPTNO electrode illustrate that the IL-directed mesoporous structure can enhance the cyclability of NPTNO cells due to the alleviation of repetitive mechanical stress and volume fluctuation induced by the repetitive Li+ insertion-extraction processes. The measured Li+ diffusion coefficients from the galvanostatic intermittent titration technique suggest that the IL-templating strategy indeed ensures the fast rechargeability of NPTNO cells based on the fast Li+ diffusion kinetics. Benefitting from the nanoporous structure, NPTNO with unhindered Li+ diffusion pathways achieves a superior rate capability in the titanium-based oxide materials and the best full-cell cyclability in the TNO materials. Therefore, the templating potential of IL is demonstrated, and the superb electrochemical performance establishes the IL-directed NPTNO as a promising anode candidate for fast-rechargeable LIBs.
RESUMEN
Tea is rich in catechins and aluminum. In this study, the process of catechin photolysis was applied as a model for examining the effects of aluminum chloride (AlCl3) on the structural changes of catechin and the alteration of aluminum complexes under blue light irradiation (BLI) at pH 8 using liquid chromatography and mass spectrometry techniques. Additionally, the effects of anions on catechin upon the addition of AlCl3 and treatment with BLI were also studied. In this study, when 1 mM catechin was treated with BLI, a superoxide anion radical (O2â¢-) was generated in an air-saturated aqueous solution, in addition to forming a dimeric catechin (proanthocyanidin) via a photon-induced redox reaction. The relative percentage of catechin was found to be 59.0 and 95.7 for catechin treated with BLI and catechin upon the addition of 1 mM AlCl3 treated with BLI, respectively. It suggested that catechin treated with BLI could be suppressed by AlCl3, while AlCl3 did not form a complex with catechin in the photolytic system. However, under the same conditions, it was also found that the addition of AlCl3 inhibited the photolytic formation of O2â¢-, and reduced the generation of proanthocyanidin, suggesting that the disconnection of proanthocyanidin was achieved by AlCl3 acting as a catalyst under treatment with BLI. The influence of 1 mM fluoride (F-) and 1 mM oxalate (C2O42-) ions on the photolysis of 1 mM catechin upon the addition of 1 mM AlCl3 and treatment with BLI was found to be insignificant, implying that, during the photolysis of catechin, the Al species were either neutral or negatively charged and the aluminum species did not form a complex with anions in the photolytic system. Therefore, aluminum, which is an amphoteric species, has an inherent potential to stabilize the photolysis of catechin in an alkaline conditions, while suppressing the O2â¢- and proanthocyanidin generation via aluminum ion catalysis in the catechin/Al system under treatment with BLI.
Asunto(s)
Cloruro de Aluminio/química , Catequina/química , Fotólisis , Proantocianidinas/química , Superóxidos/química , Aluminio/química , Cromatografía Liquida , Luz , Espectrometría de Masas , Plantas/química , Té/químicaRESUMEN
Polypyrrole encapsulated nickel nanorods (PPy@Ni) have been prepared by electro-polymerization using Ni nanorods as template. PPy@Ni were characterized using transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectrometer, Fourier transform infrared (FTIR) spectra and vibrating sample magnetometry (VSM). The maximum saturation magnetization of PPy@Ni was up to 44.6 emu g-1. Further, PPy@Ni was used as the additive for the conductivity improvement in polymer matrix. Experimental results showed that the electric conductivity reached 1.8×10-3 S m-1 when 5% PPy@Ni was added in the poly(urethane acrylate) matrix by applying a magnetic field. Further tests showed that when the additive concentration increased from 0.1% to 5%, the correspondence saturation magnetization increased from 15.1 emug-1 to 31.3 emug-1. This work provides new light on controllable fabrication of conducting polymer by adding magnetic alignment conductive additives.
RESUMEN
Catechins belonging to polyhydroxylated polyphenols are the primary compounds found in green tea. They are associated with many physiological properties. Epicatechin (EC) is a non-gallate-type catechin with four phenolic hydroxyl groups attached. The changes in EC treated with color light illumination in an alkaline condition were investigated by chromatographic and mass analyses in this study. In particular, the superoxide anion radical (O2â¢-) was investigated during the EC photolytic process. EC is unstable under blue light illumination in an alkaline solution. When EC was treated with blue light illumination in an alkaline solution, O2â¢- was found to occur via a photosensitive redox reaction. In addition, the generation of monomeric, dimeric, and trimeric compounds is investigated. On the other hand, epigallocatechin gallate (EGCG), which is a gallate-type catechin, is stable under blue light illumination in an alkaline solution. Adding EGCG, during the blue light illumination treatment of EC decreased photolytic formation, suggesting that gallate-type catechins can suppress the photosensitive oxidation of EC. Gallate-type catechins are formed via the esterification of non-gallate-type catechins and gallic acid (GA). The carbonyl group on the gallate moiety of gallate-type catechins appears to exhibit its effect on the stability against the photosensitive oxidation caused by blue light illumination.
Asunto(s)
Catequina/análogos & derivados , Catequina/química , Estabilidad de Medicamentos , Estructura Molecular , Fotólisis , Té/químicaRESUMEN
Nitrogen doped carbon nanocage with graphitic shell (NGCS) was fabricated through in-situ solid reaction between calcium acetate and dicyandiamide in an inert atmosphere followed by acid etching. The role played by the calcium acetate (Ca(Ac)2) and dicyandiamide (DCD) during the synthesis process is one-stone-two-birds. Calcium acetate plays multiple functions: template agent, graphitization catalyst, and carbon source. Dicyandiamide can be considered as the nitrogen sources and the chemical reaction agent that can be reacted with calcium acetate to form it into CaCN2. The NGCS obtained at 800 °C has a specific surface area of 420 m2/g and nitrogen content of 8.87 at%. The excellent electrochemical performance can be attributed to the combination effects of porous structure, nitrogen doping and graphitized nanocage shell of NGCS electrode. The hollow structure serves as the reservoir for fast electrolyte ion supplement. Nitrogen groups not only improve the wettability of interfaces between carbon surface and electrolyte, but also generate extra pseudocapacitance through redox reaction. The graphitic carbon nanocage shell can enhance the conductivity and facilitates the fast charge transfer. At a current density of 0.5 A/g, the specific capacitance of the NGCS-800 electrode is 215 F/g. Furthermore, the NGCS-800 electrode exhibits excellent rate capability (80% capacitance retention at 10 A/g) and outstanding cycling stability (96.89% capacitance retention after 5000 cycles). These intriguing results demonstrate that nitrogen doped carbon with graphitic shell will be highly promising as electrode materials for supercapacitors and other energy storage and conversation applications.
RESUMEN
Catechin is a flavan-3-ol, a derivative of flavans, with four phenolic hydroxyl groups, which exhibits a wide range of physiological properties. Chromatographic analyses were employed to examine the effects of blue light irradiation on the changes of catechin hydrate in an alkaline condition. In particular, the detection of a superoxide anion radical (O2â¢−), a reactive oxygen species (ROS), and the inactivation of Acinetobacter baumannii (A. baumannii)including a carbapenem-resistant A. baumannii (CRAB)was investigated during the photoreaction of catechin hydrate. Following basification with blue light irradiation, the transparent solution of catechin hydrate turned yellowish, and a chromogenic catechin dimer was separated and identified as a proanthocyanidin. Adding ascorbic acid during the photolytic treatment of catechin hydrate decreased the dimer formation, suggesting that ascorbic acid can suppress the photosensitive oxidation of catechin. When catechin hydrate was irradiated by blue light in an alkaline solution, O2â¢− was produced via photosensitized oxidation, enhancing the inactivation of A. baumannii and CRAB. The present findings on the photon-induced oxidation of catechin hydrate provides a safe practice for the inactivation of environmental microorganisms.
Asunto(s)
Acinetobacter baumannii/efectos de los fármacos , Catequina/farmacología , Resistencia a Antineoplásicos/efectos de los fármacos , Fármacos Fotosensibilizantes/farmacología , Acinetobacter baumannii/metabolismo , Ácido Ascórbico/química , Carbapenémicos/farmacología , Catequina/química , Pruebas de Sensibilidad Microbiana , Viabilidad Microbiana/efectos de los fármacos , Estructura Molecular , Fármacos Fotosensibilizantes/química , Especies Reactivas de Oxígeno/metabolismoRESUMEN
A quantum dot (QD) dispersant material was prepared using graphite oxide (GO). Luminescent films were prepared using polyvinyl alcohol as the polymer matrix. First, water-soluble CdTe QDs were prepared by wet chemistry and GO was synthesized using a modified Hummers method. X-Ray diffraction tests showed that the GO reflection peak [001] was 11.9°, which indicates that the d-spacing is 0.7431 nm; atomic force microscopy showed a GO thickness of 200 nm. Fourier transform infrared spectra showed vibrations at 1624 cm-1 for the carbonyl groups, and 3260 cm-1 for the GO samples; the -C-O vibration was at 1320 cm-1 and -COOH, -OH vibrations were at 950 cm-1 . Fluorescent tests showed that pH had an impact on the QD colloidal stability. GO was neutralized before use as the host media for the GO/QDs nanocomposite. The results proved that the resultant nanocomposite is promising for use in brightness enhancement films in flexible displays.
Asunto(s)
Cadmio/química , Grafito/química , Nanocompuestos/química , Puntos Cuánticos/química , Telurio/química , Luminiscencia , Polímeros/síntesis química , Polímeros/química , Difracción de Rayos XRESUMEN
Urethane acrylate (UA) was used to prepare carbon quantum dots (C-dots) luminescent membranes and the resultants were examined with FT-IR, mechanical strength, scanning electron microscope (SEM) and quantum yields (QYs). FT-IR results showed the polyurethane acrylate (PUA) prepolymer -C = C-vibration at 1101 cm-1 disappeared but there was strong vibration at1687cm-1 which was contributed from the-C = O groups in cross-linking PUA. Mechanical strength results showed that the different quantity of C-dots loadings and UV-curing time affect the strength. SEM observations on the cross-sections of the membranes are uniform and have no structural defects, which prove that the C-dots are compatible with the water-soluble PUA resin. The C-dot loading was increased from 0 to 1 g, the maximum tensile stress was nearly 2.67 MPa, but the tensile strain was decreased from 23.4% to 15.1% and 7.2% respectively. QYs results showed that the C-dots in the membrane were stable after 120 h continuous irradiation. Therefore, the C-dots photoluminescent film is the promising material for the flexible devices in the future applications.
Asunto(s)
Carbono/química , Puntos Cuánticos/química , Resinas Acrílicas/química , Luminiscencia , Membranas Artificiales , Microscopía Electrónica de Rastreo , Poliuretanos/química , Espectroscopía Infrarroja por Transformada de Fourier , Rayos UltravioletaRESUMEN
S-doped Na2Ti6O13@TiO2 (S-TTO) core-shell nanorods, with exposed anatase TiO2 {101} facets, were synthesized by a facile calcination method. It was found that the addition of thiourea as the sulfur precursor was beneficial for the formation of anatase TiO2 with a better crystallinity and the doped sulfur atoms favorably stabilized the anatase structure. The substitution of Ti(4+) by S(6+) in the lattice of S-TTO gave rise to the visible light response and increased the amount of active groups typically as a hydroxyl radical adsorbed onto the catalyst surface. With the formation of the Ti-O-S bond, partial electrons could be transferred from S to O atoms. The electron-deficient S atoms might capture e(-) and thus inhibit the recombination of photogenerated electron-hole pairs. Meanwhile, a closely contacted interface was formed between Na2Ti6O13 and anatase TiO2, resulting in a nanoscale heterojunction structure to speed up the separation rate of photogenerated charge carriers. The exposed anatase {101} facets could act as possible reservoirs of the photogenerated electrons, yielding a highly reactive surface for the reduction of O2 to O2Ë(-) and thus the decrease of recombination probability of electron-hole pairs. In addition, the anisotropically shaped titanate nanorods provided a pathway for the quick transport of charge carriers throughout the longitudinal direction. The combined effects of S doping, nano-heterojunction formation and morphology engineering led to an obviously enhanced photocatalytic performance for the degradation of methylene blue (MB) solution under visible light irradiation. The corresponding photocatalytic mechanism was investigated and discussed in detail. The present work may provide an insight into the fabrication of delicate composite photocatalysts with excellent performance.
RESUMEN
MoO2 hollow microspheres with tunable inner space have been synthesized through a hydrothermal process using MoO3 microbelts instead of bulk MoO3 as the precursor. It is found that the reactant morphology has a great impact on the product morphology and the inner space can be tuned by changing the amount of NaOH aqueous solution. An interesting evolutional process from MoO3 microbelts through a rose-like intermediate to MoO2 hollow microspheres has been clearly observed, and thus the possible formation mechanism is revealed. One layer of amorphous carbon has been subsequently coated on the surface of MoO2 hollow microspheres through a simple hydrothermal approach followed by annealing in argon. As the anode material for lithium ion batteries, MoO2@C hollow microspheres manifest excellent lithium-storage properties, such as high capacity (677 mA h g(-1)) and good cycling stability (negligible capacity fading even after 80 cycles). The significantly enhanced performance of MoO2@C hollow microspheres can be attributed to its unique structures, such as nanoscaled primary building blocks, carbon coating, hollow structure, and especially the synergy between the carbon coating and hollow structure.
RESUMEN
An effective approach has been used to synthesize N-doped HTiNbO5 (denoted as N-HTiNbO5) with a better intercalation property. The synthesis of polyaniline (PANI) with N-HTiNbO5 to form PANI-N-HTiNbO5 lamellar nanocomposites by in situ polymerization using the aniline (ANI) intercalation compound ANI/N-HTiNbO5 as the intermediate has been investigated. The resulting PANI-N-HTiNbO5 nanocomposite showed a better crystallinity with a monolayer of PANI within the interlayers of N-HTiNbO5, because nitrogen doping can affect the surface charge distribution of [TiNbO5](-) layers. The cyclic voltammetry (CV) results indicated that the PANI-N-HTiNbO5 nanocomposite had good redox activity and electrochemical-cycling stability in acidic solution. The visible-light response of the PANI-N-HTiNbO5 nanocomposite was enhanced through N-doping, acid exchange, and the intercalation of PANI. The PANI-N-HTiNbO5 nanocomposite showed the highest activity with 97.8% methylene blue (MB) photodegraded in 170 min under visible light irradiation. The significant enhancement of photocatalytic performance can be attributed to the high efficiency of charge separation, induced by the synergistic effect between PANI and N-HTiNbO5. In addition, the PANI-N-HTiNbO5 nanocomposite had a high thermal and photodegradation stability due to the intercalation reaction at the molecular level.
RESUMEN
Sodium citrate (SC) is sensitive to violet light illumination (VLI) and acts as a weak reductant. Conversely, gold (III) chloride trihydrate (GC) often acts as an oxidant in a redox reaction. In this study, the influences of colored light on the production of gold nanoparticles (AuNPs) in a mixture of gold (III) ions and citrate via VLI and the antibacterial photodynamic inactivation (aPDI) of Escherichia coli (E. coli) are determined under alkaline conditions. The diameter of AuNPs is within the range of 3-15 nm, i.e., their mean diameter is 9 nm; when citrate is mixed with gold (III) ions under VLI, AuNPs are formed via an electron transfer process. Additionally, GC mixed with SC (GCSC) inhibits E. coli more effectively under VLI than it does under blue, green, or red light. GCSC and SC are shown to inhibit E. coli populations by 4.67 and 1.12 logs, respectively, via VLI at 10 W/m2 for 60 min under alkaline conditions. GCSC-treated E. coli has a more significant photolytic effect on anionic superoxide radical (O2â¢-) formation under VLI, as more O2â¢- is formed within E. coli if the GCSC-treated samples are subjected to VLI. The O2â¢- exhibits a greater effect in a solution of GCSC than that shown by SC alone under VLI treatment. Gold (III) ions in a GCSC system appear to act as an oxidant by facilitating the electron transfer from citrate under VLI and the formation of AuNPs and O2â¢- via GCSC photolysis under alkaline conditions. As such, the photolysis of GCSC under VLI is a useful process that can be applied to aPDI.
RESUMEN
Gold nanoparticles (GNPs) are usually formed via a wet chemical method using gold (III) chloride trihydrate (GC), which is treated with stable reducing agents such as sodium citrate (SC). This study determines the effect of coloured light on the formation of GNPs by irradiation of SC after the addition of GC (SCGC) and the effect of the SCGC photolytic procedure on the suppression of WiDr colon cancer cells by forming reactive oxygen species. The absorbance of surface plasmon resonance peaks at 523 nm are 0.069 and 0.219 for SCGC when treated with blue light illumination (BLI) and violet light irradiation (VLI), respectively, whereas green and red light treatments have little or no effect. Most GNPs have diameters ranging from 3 to 15 nm, with a mean of 6 nm, when SCGC is exposed to VLI for 1.5 h. Anionic superoxide radicals (O2â¢-) are formed in a charge-transfer process after SCGC under VLI treatment; however, BLI treatment produces no significant reaction. Moreover, SCGC under VLI treatment proves to be considerably more effective at inhibiting WiDr cells than BLI treatment, as firstly reported in this study. The reduction rates for WiDr cells treated with SCGC under BLI and VLI at an intensity of 2.0 mW/cm2 for 1.5 h (energy dose, 10.8 J/cm2) are 4.1% and 57.7%, respectively. The suppression rates for WiDr cells treated with SCGC are inhibited in an irradiance-dependent manner, the inhibition percentages being 57.7%, 63.3%, and 80.2% achieved at VLI intensities of 2.0, 4.0, and 6.0 mW/cm2 for 1.5 h, respectively. Propidium iodide is a fluorescent dye that detects DNA changes after cell death. The number of propidium iodide-positive nuclei significantly increases in WiDr cells treated with SCGC under VLI, suggesting that SCGC photolysis under VLI is a potential treatment option for the photodynamic therapy process.
Asunto(s)
Neoplasias del Colon , Compuestos de Oro , Nanopartículas del Metal , Humanos , Citrato de Sodio , Nanopartículas del Metal/toxicidad , Oro/farmacología , Fotólisis , Propidio , Neoplasias del Colon/tratamiento farmacológicoRESUMEN
Photochemical reductive deamination of alpha-amino aryl alkyl ketones under photosensitizer-free conditions is presented. This protocol features high efficiency and selectivity. A plausible reaction pathway is proposed based on ultraviolet-visible absorption investigation, control experiments and deuterium-labelling studies. Mechanistic study reveals that the alpha-hydrogen atom of the ketone product originated from water.
RESUMEN
Riboflavin-5'-phosphate (FMN), an innocuous product of riboflavin (RF) phosphorylation, is vital for humans. FMN is sensitive to light illumination, as indicated by reactive oxygen species (ROS) formation. This investigation was undertaken to evaluate the influence of blue light illumination (BLI) and violet light illumination (VLI) upon FMN to develop a method to inhibit WiDr colon cancer cells by FMN photolysis. When FMN is subjected to BLI and VLI, it inhibits WiDr colon cancer cells by generating superoxide radical anions (O2â¢-). The respective reduction rates are 42.6 and 81.9 % in WiDr colon cancer cells for FMN treated with BLI and VLI at 20 W/m2 for 0.5 h. FMN treated with VLI inhibits WiDr colon cancer cells more effectively than BLI. Propidium iodide (PI) is a fluorescent dye that is used to detect abnormal DNA due to cell death by apoptosis or necrosis. The PI-positive count for nuclei increased significantly for the WiDr colon cancer cells that were treated with FMN under VLI at 20 W/m2 for 0.5 h. FMN photolysis achieved using VLI allows efficient photodynamic therapy (PDT) by triggering the cytotoxicity of FMN on WiDr colon cancer cells.
Asunto(s)
Neoplasias del Colon , Fotoquimioterapia , Humanos , Especies Reactivas de Oxígeno/metabolismo , Luz , Fotoquimioterapia/métodos , Fármacos Fotosensibilizantes/farmacología , Riboflavina/farmacología , Neoplasias del Colon/tratamiento farmacológico , FosfatosRESUMEN
Riboflavin-5'-phosphate (or flavin mononucleotide; FMN) is sensitive to visible light. Various compounds, including reactive oxygen species (ROS), can be generated from FMN photolysis upon irradiation with visible light. The ROS generated from FMN photolysis are harmful to microorganisms, including pathogenic bacteria such as Staphylococcus aureus (S. aureus). This article presents a protocol for deactivating S. aureus, as an example, via photochemical reactions involving FMN under visible light irradiation. The superoxide radical anion () generated during the FMN photolysis is evaluated via nitro blue tetrazolium (NBT) reduction. The microbial viability of S. aureus that is attributed to reactive species was used to determine the effectiveness of the process. The bacterial inactivation rate is proportional to FMN concentration. Violet light is more efficient in inactivating S. aureus than blue light irradiation, while the red or green light does not drive FMN photolysis. The present article demonstrates FMN photolysis as a simple and safe method for sanitary processes.
Asunto(s)
Mononucleótido de Flavina , Staphylococcus aureus , Mononucleótido de Flavina/química , Luz , Fosfatos , Fotólisis , Especies Reactivas de OxígenoRESUMEN
Doxycycline hyclate (DCH) and minocycline hydrochloride (MH) are tetracycline antibiotics and broad-spectrum antimicrobial agents. The changes in DCH and MH under blue light (λ = 462 nm) irradiation in alkaline conditions (BLIA) were investigated. Deactivation caused by superoxide anion radical (O2â¢-) and deactivation from DCH and MH during photolysis on Staphylococcus aureus (S. aureus), including methicillin-resistant S. aureus (MRSA), were studied. DCH is relatively unstable compared to MH under BLIA. The level of O2â¢- generated from the MH-treated photoreaction is lower than that from DCH photolysis, and the DCH-treated photoreaction is more efficient at inactivating S. aureus and MRSA at the same radiant intensity. DCH subjected to BLIA decreased the viability of S. aureus and MRSA by 3.84 and 5.15 log, respectively. Two photolytic products of DCH (PPDs) were generated under BLIA. The mass spectra of the PPDs featured molecular ions at m/z 460.8 and 458.8. The molecular formulas of the PPDs were C21H22N2O10 and C22H24N2O9, and their exact masses were 462.44 and 460.44 g/mol, respectively. These results bolster the photolytic oxidation that leads to DCH-enhanced deactivation of S. aureus and MRSA. Photochemical treatment of DCH could be applied as a supplement in hygienic processes.
Asunto(s)
Staphylococcus aureusRESUMEN
Oxytetracycline (OTC), a tetracycline antibiotic, is a broad-spectrum antibacterial agent. In this investigation, liquid chromatography-mass spectrometry (LC-MS) is utilized to determine the effects of blue light (λ = 448 nm) illumination (BLIA) and violet light (λ = 403 nm) illumination (VLIA) on conformational changes in OTC at pH 7.8. The photochemical effect of OTC that is exposed to BLIA and VLIA on the deactivation of Escherichia coli (E. coli) is studied. The deactivation of E. coli has an insignificant effect on treatment with OTC alone. OTC is relatively unstable under BLIA and VLIA illumination in an alkaline solution, and OTC has been shown to inactivate E. coli by generating reactive oxygen species (ROS). Less anionic superoxide radicals (O2â¢-) are generated from OTC that is treated with BLIA than that from VLIA treatment, so OTC is more efficient in inactivating E. coli under VLIA. Inactivation of reduction rates of 0.51 and 3.65 logs in E. coli are achieved using 0.1 mM OTC under BLIA for 120 min and VLIA for 30 min, respectively, under the same illumination intensity (20 W/m2). Two photolytic products of OTC (PPOs) are produced when OTC is exposed to BLIA and VLIA, with molecular ions at m/z 447 and 431, molecular formulae C21H22N2O9 and C21H22N2O8, and masses of 446.44 and 430.44 g/mol, respectively. The results show that when exposed to VLIA, OTC exhibits enhanced inactivation of E. coli, suggesting that the photochemical treatment of OTC is a potential supplement in a hygienic process.