RESUMEN
Heterogeneous catalytic systems with water as the solvent often have the disadvantage of cross-contamination, while concerns about the purification and workup of the aqueous phase after reactions are rare in the lab or industry. In this context, designing and developing the functional selective solid adsorbent and revealing the adsorption mechanism can provide a new strategy and guidelines for constructing supported heterogeneous catalysts to address these issues. Herein, we report the stable composite adsorbent (Fe/ATP@PPy: magnetic Fe3O4/attapulgite with the polypyrrole shell) that features an integrated multifunctional surface, which can effectively tune the selective adsorption processes for Cu2+, Co2+, and Ni2+ ions and nitrobenzene via the cooperative chemisorption/physisorption in an aqueous system. The adsorption experiments showed that Fe/ATP@PPy displayed significantly higher adsorption selectivity for Ni2+ than Cu2+ and Co2+ ions, especially which exhibited an approximate 100.00% removal for both Ni2+ ions and nitrobenzene in the mixture system with a low concentration. Furthermore, combined tracking adsorption of Ni2+ ions and X-ray photoelectron spectroscopy characterization confirmed that the effective adsorption occurs via ion transfer coordination; the pathway was further validated at the molecular level through theoretical modeling. In addition, the selective adsorption mechanism was proposed based on the adsorption experiment, characterization, and the corresponding density functional theory calculation.
RESUMEN
Theoretical and experimental investigations have shown that biochar, following KOH activation, enhances the efficiency of NO removal. Similarly, NaOH activation also improves NO removal efficiency, although the underlying mechanism remains unclear. In this study, zigzag configurations were employed as biochar models. Density functional theory (DFT) was utilized to examine how Li and Na single adsorption and OH co-adsorption affect the reaction pathways of NO reduction on the biochar surface. The rate constants for all reaction-determining steps (RDSs) within a temperature range of 200 to 1000 K were calculated using conventional transition state theory (TST). The results indicate a decrease in the activation energy for NO reduction reactions on biochar when activated by Li and Na adsorption, thus highlighting their beneficial role in NO reduction. Compared to the case with Na activation, Li-activated biochar exhibited superior performance in terms of the NO elimination rate. Furthermore, upon the adsorption of the OH functional group onto the Li-decorated and Na-decorated biochar models (LiOH-decorated and NaOH-decorated chars), the RDS energy barriers were higher than those of Li and Na single adsorption but easily overcome, suggesting effective NO reduction. In conclusion, Li-decorated biochar showed the highest reactivity due to its low RDS barrier and exothermic reaction on the surface.
RESUMEN
The interfacial mechanism has always been a concern for 3-aminopropyltriethoxysilane (APTES)-grafted palygorskite (PAL). In this research, the mechanism of graft modification for grafting of APTES to the surface of PAL (100) was studied using density functional theory (DFT) calculation. The results illustrated that different grafting states of the APTES influence the inter- and intramolecular interactions between APTES/PAL (100), which are reflected in the electronic structures. For single-, double-, and three-toothed state APTES-PAL (100), the charge transfer rates from the PAL (100) surface to APTES were 0.68, 1.02, and 0.77 e, respectively. The binding energy results show that PAL (100) modification performance in the double-tooth state is the best compared to the other states, with the lowest value of -181.91 kJ/mol. The double-toothed state has lower barrier energy (94.69, 63.11, and 153.67 kJ/mol) during the modification process. This study offers theoretical insights into the chemical modification of the PAL (100) surface using APTES coupling agents, and can provide a guide for practical applications.
RESUMEN
The development of a sustainable and simple catalytic system for N-formylation of N-heterocycles with methanol by direct coupling remains a challenge, owing to many competing side reactions, given the sensitivity of N-heterocycles to many catalytic oxidation or dehydrogenation systems. This work concerns the development of an inâ situ-generated CuI catalytic system for oxidative N-formylation of N-heterocycles with methanol that is based on the case study of a more typical 1,2,3,4-tetrahydroquinoline as substrate. Aside from N-heterocycles, some acyclic amines are also transformed into the corresponding N-formamides in moderate yields. Furthermore, a probable reaction mechanism and reaction pathway are proposed and extension of work based on some findings leads to a demonstration that the formed â O2 - and â OOH radicals in the catalytic system is related to the formation of undesired tar-like products.
RESUMEN
A systematic investigation on the S(N) 2 displacement reactions of nine carbene radical anions toward the substrate CH(3) Cl has been theoretically carried out using the popular density functional theory functional BHandHLYP level with different basis sets 6-31+G (d, p)/relativistic effective core potential (RECP), 6-311++G (d, p)/RECP, and aug-cc-pVTZ/RECP. The studied models are CX(1) X(2â¢-) + CH(3) Cl â X(2) X(1) CH(3) C(â¢) + Cl(-) , with CX(1) X(2â¢-) = CH(2) (â¢-) , CHF(â¢-) , CHCl(â¢-) , CHBr(â¢-) , CHI(â¢-) , CF(2) (â¢-) , CCl(2) (â¢-) , CBr(2) (â¢-) , and CI(2) (â¢-) . The main results are proposed as follows: (a) Based on natural bond orbital (NBO), proton affinity (PA), and ionization energy (IE) analysis, reactant CH(2) (â¢-) should be a strongest base among the anion-containing species (CX(1) X(2â¢-) ) and so more favorable nucleophile. (b) Regardless of frontside attacking pathway or backside one, the S(N) 2 reaction starts at an identical precomplex whose formation with no barrier. (c) The back-S(N) 2 pathway is much more preferred than the front-S(N) 2 one in terms of the energy gaps [ΔE cent≠(front)-ΔE cent≠(back)], steric demand, NBO population analysis. Thus, the back-S(N) 2 reaction was discussed in detail. On the one hand, based on the energy barriers (ΔE cent≠ and ΔE ovr≠) analysis, we have strongly affirmed that the stabilization of back attacking transition states (b-TSs) presents increase in the order: b-TS-CI(2) < b-TS-CBr(2) < b-TS-CCl(2) < b-TS-CHI < b-TS-CHBr < b-TS-CHCl < b-TS-CF(2) < b-TS-CHF < b-TS-CH(2) . On the other hand, depended on discussions of the correlations of ΔE ovr≠ with influence factors (PA, IE, bond order, and ΔE def≠), we have explored how and to what extent they affect the reactions. Moreover, we have predicted that the less size of substitution (α-atom) required for the gas-phase reaction with α-nucleophile is related to the α-effect and estimated that the reaction with the stronger PA nucleophile, holding the lighter substituted atom, corresponds to the greater exothermicity given out from reactants to products.
Asunto(s)
Bromo/química , Cloro/química , Ácido Clorhídrico/química , Ácido Fluorhídrico/química , Yoduros/química , Yodo/química , Cloruro de Metilo/química , Teoría Cuántica , GasesRESUMEN
Based on a metal coordination driven co-assembly strategy, a metal-organic supramolecular polymer system of pyridine Schiff-base cholesterol and metal ions with multiple supramolecular chirality inversion was successfully achieved by the stoichiometry and exchange of metal ions (such as Co2+, Ni2+, Cu2+, Zn2+, and Ag+), as well as the solvent polarity.
Asunto(s)
Piridinas , Bases de Schiff , Colesterol , Iones , PolímerosRESUMEN
A novel hydrophobic and cationic cyclodextrin-based acrylamide flocculant (AM-ß-CD-DMDAAC) was prepared by chemical oxidative polymerization to adsorb water-soluble dyes in dye wastewater. Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscope and thermogravimetric (TG) measurements results demonstrated that the AM-ß-CD-DMDAAC was successfully synthesized. The effects of pH, contact time, initial dye concentration, temperature and adsorbent dose on dye removal efficiency for AM-ß-CD-DMDAAC flocculants were investigated. The kinetic data were found to follow the pseudo-second-order kinetic model. The equilibrium adsorption data were fitted to the Langmuir isotherm model, with the maximum adsorption capacity of 147.1 mg g-1. The adsorbent retained about 60% of the adsorption efficiency after three adsorption/desorption cycles, which implied a promising application as the dye adsorbent.
RESUMEN
A computational study of the platinum-catalyzed cyclopropanation reaction with olefin is presented. The model system is formed by an ethylene molecule and the active catalytic species, which forms from a CH2 fragment and the Cl2Pt(PH3)2 complex. The results show that the active catalytic species is not a metal-carbene of the type (PH3)2Cl2Pt=CH2 but two carbenoid complexes which can exist in almost two degenerate forms, namely (PH3)2Pt(CH2Cl)Cl (carbenoid A) and (PH3)Pt(CH2PH3)Cl2 (carbenoid B). The reaction proceeds through three pathways: methylene transfer, carbometalation for carbenoid A, and the reaction of a monophosphinic species for carbenoids (A and B). The most favored reaction channel is methylene transfer pathway for (PH3)Pt(CH2PH3)Cl2 (carbenoid B) species with a barrier of 31.32 kcal/mol in gas phase. The effects of dichloromethane, THF, and benzene solvent are investigated with PCM method. For carbenoid A, both methylene transfer and carbometalation pathway barriers to reaction become remarkably lower with the increasing polarity of solvent (from 43.25 and 52.50 kcal/mol for no solvent to 25.36 and 38.53 kcal/mol in the presence of the dichloromethane). In contrast, the reaction barriers for carbenoid B via the methylene transfer path hoist 6.30 kcal/mol, whereas the barriers do not change significantly for the reaction path of a monophosphinic species for carbenoids (A and B).