Tuning Electrocatalytic Activities of Dealloyed Nanoporous Catalysts by Macroscopic Strain Engineering.

It is technically challenging to quantitatively apply strains to tune catalysis because most heterogeneous catalysts are nanoparticles, and lattice strains can only be applied indirectly via core-shell structures or crystal defects. Herein, we report quantitative relations between macroscopic strains and hydrogen evolution reaction (HER) activities of dealloyed nanoporous gold (NPG) by directly applying macroscopic strains upon bulk NPG. It was found that macroscopic compressive strains lead to a decrease, while macroscopic tensile strains improve the HER activity of NPG, which is in line with the d-band center model. The overpotential and onset potential of HER display approximately a linear relation with applied macroscopic strains, revealing an ∼2.9 meV decrease of the binding energy per 0.1% lattice strains from compressive to tensile. The methodology with the high strain sensitivity of electrocatalysis, developed in this study, paves a new way to investigate the insights of strain-dependent electrocatalysis with high precision.

Dual Redox Reaction Sites for Pseudocapacitance Based on Ti and -P Functional Groups of Ti3C2PBrx MXene.

MXenes have extensive applications due to their different properties determined by intrinsic structures and various functional groups. Exploring different functional groups of MXenes leads to improved performance or potential applications. In this work, we prepared new Ti3C2PBrx (x=0.4-0.6) MXene with phosphorus functional groups (-P) through a two-step gas-phase reaction. The acquisition of -P is achieved by replacing bromine functional groups (-Br) of Ti3C2Br2 in the phosphorus vapor. After -Br is replaced with -P, Ti3C2PBrx MXene shows an improved areal capacitance (360 mF cm-2) at 20 mV s-1 compared with Ti3C2Br2 MXene (102 mF cm-2). At a current density of 5 mA cm-2 after 10000 cycles, the capacitance retention of Ti3C2PBrx MXene has not decreased. The pseudocapacitive enhancement mechanism has been discovered based on the dual redox sites of the functional groups -P and Ti.

Engineering Dynamic Defect of CeIII /CeIV -Based Metal-Organic Framework through Ultrasound-Triggered Au Electron Trapper for Sonodynamic Therapy of Osteomyelitis.

Defect engineering is an important way to tune the catalytic properties of metal-organic framework (MOF), yet precise control of defects is difficult to achieve. Herein, a cerium-based MOF (CeTCPP) is decorated with Au nanoparticles. Under ultrasound irradiation, Au nanoparticles can precisely turn 1/3 of the pristine Ce3+ nodes into Ce4+ . With the stable existence of Ce4+ , the coordination of Ce nodes changed, causing the structural irregularity in CeTCPP-Au, so that the electron-hole recombination is obviously hindered, facilitating the generation of reactive oxygen species. Therefore, under 20 min of ultrasound irradiation, the CeTCPP-Au showed superior antibacterial efficacy of over 99% against Staphylococcus aureus and Escherichia coli with good biocompatibility, which is further used for effective therapy of osteomyelitis. Overall, this work provides a dynamic defect formation strategy of MOF through the electron trapping of Au nanoparticles, which also sheds light on sonodynamic therapy in curing deep-seated lesions.

High-performance five-ring-fused organic semiconductors for field-effect transistors.

Organic molecular semiconductors have been paid great attention due to their advantages of low-temperature processability, low fabrication cost, good flexibility, and excellent electronic properties. As a typical example of five-ring-fused organic semiconductors, a single crystal of pentacene shows a high mobility of up to 40 cm2 V-1 s-1, indicating its potential application in organic electronics. However, the photo- and optical instabilities of pentacene make it unsuitable for commercial applications. But, molecular engineering, for both the five-ring-fused building block and side chains, has been performed to improve the stability of materials as well as maintain high mobility. Here, several groups (thiophenes, pyrroles, furans, etc.) are introduced to design and replace one or more benzene rings of pentacene and construct novel five-ring-fused organic semiconductors. In this review article, ∼500 five-ring-fused organic prototype molecules and their derivatives are summarized to provide a general understanding of this catalogue material for application in organic field-effect transistors. The results indicate that many five-ring-fused organic semiconductors can achieve high mobilities of more than 1 cm2 V-1 s-1, and a hole mobility of up to 18.9 cm2 V-1 s-1 can be obtained, while an electron mobility of 27.8 cm2 V-1 s-1 can be achieved in five-ring-fused organic semiconductors. The HOMO-LUMO levels, the synthesis process, the molecular packing, and the side-chain engineering of five-ring-fused organic semiconductors are analyzed. The current problems, conclusions, and perspectives are also provided.

Alloying-Triggered Phase Engineering of NiFe System via Laser-Assisted Al Incorporation for Full Water Splitting.

It is challenging to design one non-noble material with balanced bifunctional performance for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) for commercial sustainability at a low cost since the different electrocatalytic mechanisms are not easily matchable for each other. Herein, a self-standing hybrid system Ni18 Fe12 Al70 , consisting of Ni2 Al3 and Ni3 Fe phases, was constructed by laser-assisted aluminum (Al) incorporation towards full water splitting. It was found that the incorporation of Al could effectively tune the morphologies, compositions and phases. The results indicate that Ni18 Fe12 Al70 delivers an extremely low overpotential to trigger both HER (η100 =188 mV) and OER (η100 =345 mV) processes and maintains a stable overpotential for 100 h, comparable to state-of-the-art electrocatalysts. The synergistic effect of Ni2 Al3 and Ni3 Fe alloys on the HER process is confirmed based on theoretical calculation.

Magnetic Composite Rapidly Treats Staphylococcus aureus-Infected Osteomyelitis through Microwave Strengthened Thermal Effects and Reactive Oxygen Species.

It is difficult to effectively treat bacterial osteomyelitis using photothermal therapy or photodynamic therapy due to poor penetration of light. Here, a microwave (MW)-excited magnetic composite of molybdenum disulfide (MoS2 ) / iron oxide (Fe3 O4 ) is reported for the treatment of bacteria-infected osteomyelitis. In in vitro and in vivo experiments, MoS2 /Fe3 O4 is shown to effectively eradicate bacteria-infected mouse tibia osteomyelitis, due to MW thermal enhancement and reactive oxygen species (ROS) (1 O2 and ·O2 - ) production under MW radiation. In addition, the mechanism of MW heat generation is proposed by MW network vector analysis. By the density functional theory and finite element method, the ROS generation mechanism is proposed. The synergy or conductive network between dielectric MoS2 and magnetic Fe3 O4 can reach both enhancement of the dielectric and magnetic attenuation capability. In addition, abundant interfaces are generated to enhance the attenuation of electromagnetic waves by MoS2 and Fe3 O4, introducing multiple reflections and interfacial polarization. Therefore, MoS2 /Fe3 O4 has excellent MW absorption ability based on the synergy or conductive network between MoS2 and magnetic Fe3 O4 as well as multiple dielectric reflections and interfacial polarization.

Oxygen Vacancies-Rich Heterojunction of Ti3 C2 /BiOBr for Photo-Excited Antibacterial Textiles.

Pathogenic bacteria that adhere on the surface of textiles, especially healthcare workers' uniforms, have brought severe problems, including nosocomial infection and other infectious diseases. Here, antibacterial textiles are fabricated by in situ growing oxygen vacancies (OVs) BiOBr on the surface of Ti3 C2 nanosheets followed by in situ polymerization of polypyrrole (ppy). The formed Schottky heterojunction containing OVs of Ti3 C2 /BiOBr effectively enhance the transfer and separation of photogenerated carriers, inhibit the recombination, and decrease the band gap by introducing defect level, which significantly improve the photocatalytic activity, leading to higher reactive oxygen species (ROS) under light irradiation. Therefore, the antibacterial efficacy of textiles reaches up to 98.64% against Staphylococcus aureus and 99.89% against Escherichia coli with the assistance of hyperthermia under light irradiation for 15 min. This work provides insights for designing photo-excited antibacterial textiles by interfacial construction based on Schottky junctions and OVs in the incorporated nanomaterials.

The recent progress on metal-organic frameworks for phototherapy.

Some infectious or malignant diseases such as cancers are seriously threatening the health of human beings all over the world. The commonly used antibiotic therapy cannot effectively treat these diseases within a short time, and also bring about adverse effects such as drug resistance and immune system damage during long-term systemic treatment. Phototherapy is an emerging antibiotic-free strategy to treat these diseases. Upon light irradiation, phototherapeutic agents can generate cytotoxic reactive oxygen species (ROS) or induce a temperature increase, which leads to the death of targeted cells. These two kinds of killing strategies are referred to as photodynamic therapy (PDT) and photothermal therapy (PTT), respectively. So far, many photo-responsive agents have been developed. Among them, the metal-organic framework (MOF) is becoming one of the most promising photo-responsive materials because its structure and chemical compositions can be easily modulated to achieve specific functions. MOFs can have intrinsic photodynamic or photothermal ability under the rational design of MOF construction, or serve as the carrier of therapeutic agents, owing to its tunable porosity. MOFs also provide feasibility for various combined therapies and targeting methods, which improves the efficiency of phototherapy. In this review, we firstly investigated the principles of phototherapy, and comprehensively summarized recent advances of MOF in PDT, PTT and synergistic therapy, from construction to modification. We expect that our demonstration will shed light on the future development of this field, and bring it one step closer to clinical trials.

ALD-induced TiO2/Ag nanofilm for rapid surface photodynamic ion sterilization.

The daily life of people in the intelligent age is inseparable from electronic device, and a number of bacteria on touch screens are increasingly threatening the health of users. Herein, a photocatalytic TiO2/Ag thin film was synthesized on a glass by atomic layer deposition and subsequent in situ reduction. Ultraviolet-visible (UV-Vis) spectra showed that this film can harvest the simulated solar light more efficiently than that of pristine TiO2. The antibacterial tests in vitro showed that the antibacterial efficiency of the TiO2/Ag film against S. aureus and E. coli was 98.2% and 98.6%, under visible light irradiation for 5 min. The underlying mechanism was that the in-situ reduction of Ag on the surface of TiO2 reduced the bandgap of TiO2 from 3.44 to 2.61 eV due to the formation of Schottky heterojunction at the interface between TiO2 and Ag. Thus, TiO2/Ag can generate more reactive oxygen species for bacterial inactivation on the surface of electronic screens. More importantly, the TiO2/Ag film had great biocompatibility with/without light irradiation. The platform not only provides a more convenient choice for the traditional antibacterial mode but also has limitless possibilities for application in the field of billions of touch screens.

2D MOF Periodontitis Photodynamic Ion Therapy.

Traditional surgical intervention and antibiotic treatment are poor and even invalid for chronic diseases including periodontitis induced by diverse oral pathogens, which often causes progressive destruction of tissues, even tooth loss, and systemic diseases. Herein, an ointment comprising atomic-layer Fe2O3-modified two-dimensional porphyrinic metal-organic framework (2D MOF) nanosheets is designed by incorporating a polyethylene glycol matrix. After the atomic layer deposition surface engineering, the enhanced photocatalytic activity of the 2D MOF heterointerface results from lower adsorption energy and more charge transfer amounts due to the synergistic effect of metal-linker bridging units, abundant active sites, and an excellent light-harvesting network. This biocompatible and biodegradable 2D MOF-based heterostructure exhibits broad-spectrum antimicrobial activity (99.87 ± 0.09%, 99.57 ± 0.21%, and 99.03 ± 0.24%) against diverse oral pathogens (Porphyromonas gingivalis, Fusobacterium nucleatum, and Staphylococcus aureus) by the synergistic effect of reactive oxygen species and released ions. This photodynamic ion therapy exhibits a superior therapeutic effect to the reported clinical periodontitis treatment owing to rapid antibacterial activity, alleviative inflammation, and improved angiogenesis.

ZIF-67 derived Co@NC/g-C3N4 as a photocatalyst for enhanced water splitting H2 evolution.

Graphitic carbon nitride (g-C3N4), as the one of the most promising photocatalysts, usually relies on noble metal co-catalysts in the photocatalytic water splitting H2 evolution process, which greatly increases the use cost. Here, a zeolite imidazole framework (ZIF-67) derived Co@NC/g-C3N4 composite was constructed through facile thermal condensation of ZIF-67 and melamine. The obtained Co@NC/g-C3N4 composites can drive water splitting H2 evolution without any noble metal co-catalyst under simulated sunlight. The optimal sample exhibits the highest H2 evolution rate of 161 µmol g-1·h-1, which is 6 times of pure g-C3N4. The N doped carbon in carbonized ZIF-67 can not only quickly capture separated electrons from g-C3N4, but also serve as the co-catalyst. The well dispersed cobalt intermediate on carbonized ZIF-67 also play a role in promoting electron conversion. The formation of junction between carbonized ZIF-67 and g-C3N4 could promote quick charge carrier separation and transfer. This work provides a new idea for photocatalytic H2 evolution without noble metal co-catalysis.

Peptide-Drug Conjugate-Based Nanocombination Actualizes Breast Cancer Treatment by Maytansinoid and Photothermia with the Assistance of Fluorescent and Photoacoustic Images.

To develop a highly efficient strategy against tumors, here, a nanocombination (PDC/P@HCuS) was designed and constructed to actualize chemo-phototherapy with the assistance of fluorescence (FL) and photoacoustic (PA) images. First, a type of organic-inorganic hybrid nanosystem (P@HCuS) was engineered by coupling the fluorescence-labeled amphiphilic fPEDC copolymer on the surface of hollow mesoporous copper sulfide nanoparticle (HCuS), in which HCuS was used as a photothermal and PA agent; fPEDC as a stabilizer, chromophore, and redox/pH-sensitive gatekeeper; and both of them as drug carriers. Then, a peptide-drug conjugate (cRGD-SMCC-DM1, PDC), as a molecular targeted maytansinoid, was loaded inside of P@HCuS to form PDC/P@HCuS. Next, the PDC/P@HCuS was investigated carefully with or without near-infrared (NIR) laser irradiation. In vitro, the nanocombination exhibited stimuli-responsive drug release, obvious cellular uptake, strong cytotoxicity to tumor cells, significant impact on cell cycle, and cytoskeleton and cellular proteomics as well as evident permeability into the tumor sphere, most of which could be boosted by NIR laser irradiation. In vivo, the nanocombinaiton exerted good FL/PA imaging features and photothermal efficiency, achieved the best antitumor efficacy in the presence of NIR laser irradiation, and showed excellent biosafety. Together, it demonstrated that the PDC/P@HCuS, representing a chemo-phototherapy based on a nanocombination associated with peptide-drug conjugate, could achieve the highly efficient antitumor effect.

Rapid and Superior Bacteria Killing of Carbon Quantum Dots/ZnO Decorated Injectable Folic Acid-Conjugated PDA Hydrogel through Dual-Light Triggered ROS and Membrane Permeability.

One of the most difficult challenges in the biomedical field is bacterial infection, which causes tremendous harm to human health. In this work, an injectable hydrogel is synthesized through rapid assembly of dopamine (DA) and folic acid (FA) cross-linked by transition metal ions (TMIs, i.e., Zn2+ ), which was named as DFT-hydrogel. Both the two carboxyl groups in the FA molecule and catechol in polydopamine (PDA) easily chelates Zn2+ to form metal-ligand coordination, thereby allowing this injectable hydrogel to match the shapes of wounds. In addition, PDA in the hydrogel coated around carbon quantum dot-decorated ZnO (C/ZnO) nanoparticles (NPs) to rapidly generate reactive oxygen species (ROS) and heat under illumination with 660 and 808 nm light, endows this hybrid hydrogel with great antibacterial efficacy against Staphylococcus aureus (S. aureus, typical Gram-positive bacteria) and Escherichia coli (E. coli, typical Gram-negative bacteria). The antibacterial efficacy of the prepared DFT-C/ZnO-hydrogel against S. aureus and E. coli under dual-light irradiation is 99.9%. Importantly, the hydrogels release zinc ions over 12 days, resulting in a sustained antimicrobial effect and promoted fibroblast growth. Thus, this hybrid hydrogel exhibits great potential for the reconstruction of bacteria-infected tissues, especially exposed wounds.

A reconstituted thermosensitive hydrogel system based on paclitaxel-loaded amphiphilic copolymer nanoparticles and antitumor efficacy.

Combination delivery systems composed of injectable hydrogels and drug-incorporated nanoparticles are urgently in regional cancer chemotherapy to facilitate efficient delivery of chemotherapeutic agents, enhance antitumor efficiency, and decrease side effects. Here, we developed a novel thermosensitive amphiphilic triblock copolymer consisting of methoxy poly(ethylene glycol), poly(octadecanedioic anhydride), and d,l-lactic acid oligomer (PEOALA), built a combination system of thermosensitive injectable hydrogel PTX/PEOALAGel based on paclitaxel (PTX)-loaded PEOALA nanoparticles (NPs). PTX/PEOALAGel could be stored as freeze-dried powders of paclitaxel-loaded PEOALA NPs, which could be easily redispersed into the water at ambient temperature, and form a hydrogel at the injected site in vivo. The in vitro cytotoxicity of PTX/PEOALAGel showed no obvious cytotoxicity in comparison with Taxol® against MCF-7 and HeLa cells. However, the in vivo antitumor activity showed that a single intratumoral injection of the PTX/PEOALAGel formulation was more effective than four intravenous (i.v.) injections of Taxol® at a total dosage of 20 mg/kg in inhibiting the growth of MCF-7 tumor-bearing Balb/c mice, and the inhibition could be sustained for more than 17 d. The pharmacokinetic study demonstrated that the intratumoral injection of PTX/PEOALAGel could greatly decrease the systemic exposure of PTX, as confirmed by the rather low plasma concentration, and prolonged circulation time and enhanced tumor PTX accumulation, implying fewer off-target side effects. In summary, the PTX/PEOALAGel combination local delivery system could enhance tumor inhibition effect and tumor accumulation of PTX, and lower the systemic exposure. So, the reconstituted PTX/PEOALAGel system could potentially be a useful vehicle for regional cancer chemotherapy.

Reduction Responsive Self-Assembled Nanoparticles Based on Disulfide-Linked Drug-Drug Conjugate with High Drug Loading and Antitumor Efficacy.

Most anticancer drugs are poorly soluble and nonspecific, which restricts their clinical application. Drug conjugates, as a prodrug strategy, provide the possibility to overcome these shortcomings, especially combined with nanotechnology. Drug conjugate nanoparticles possess the advantages of high drug loading capacity and passive tumor targeting ability. Here, we prepared doxorubicin drug-drug conjugate nanoparticles (DOX-SS-DOX NPs) based on disulfide-linked doxorubicin drug-drug conjugate (DOX-SS-DOX). Dynamic light scattering (DLS) and transmission electron microscope (TEM) characterization indicated that DOX-SS-DOX NPs were spherical with a uniform size distribution around 89 nm. DLS and in vitro release experiment revealed that DOX-SS-DOX NPs possessed reduction responsive activity. In vitro cellular uptake studies reflected that DOX-SS-DOX NPs could increase the uptake level substantially compared with DOX liposomes. Endocytosis mechanism assay demonstrated that DOX-SS-DOX NPs internalized into cells through a clathrin-mediated endocytosis pathway in an energy-dependent manner. In this manner, the amidase in lysosomes could break the amide bond to release free DOX, which would be helpful to antitumor activity. The in vitro cytotoxicity of DOX-SS-DOX NPs was a bit weaker than that of DOX liposomes, which might be the result of the slow cleavage of the disulfide bridge; but the antitumor efficacy of DOX-SS-DOX NPs evaluated in MCF-7 bearing mice was demonstrated to be higher than that of DOX liposomes. This might be because of the long lasting effect resulting from the slow cleavage of the disulfide bond. In summary, DOX-SS-DOX NPs, prepared nearly totally with drug, provide a good strategy for cancer therapy.

Poloxamer 407 modified collagen/ß-tricalcium phosphate scaffold for localized delivery of alendronate.

Systemic administration of alendronate is associated with various adverse reactions in clinical settings. To mitigate these side effects, poloxamer 407 (P-407) modified with cellulose was chosen to encapsulate alendronate. This drug-loaded system was then incorporated into a collagen/ß-tricalcium phosphate (ß-TCP) scaffold to create a localized drug delivery system. Nuclear magnetic resonance spectrum and rheological studies revealed hydrogen bonding between P-407 and cellulose as well as a competitive interaction with water that contributed to the delayed release of alendronate (ALN). Analysis of the degradation kinetics of P-407 and release kinetics of ALN indicated zero-order kinetics for the former and Fickian or quasi-Fickian diffusion for the latter. The addition of cellulose, particularly carboxymethyl cellulose (CMC), inhibited the degradation of P-407 and prolonged the release of ALN. The scaffold's structure increased the contact area of P-407 with the PBS buffer, thereby, influencing the release rate of ALN. Finally, biocompatibility testing demonstrated that the drug delivery system exhibited favorable cytocompatibility and hemocompatibility. Collectively, these findings suggest that the drug delivery system holds promise for implantation and bone healing applications.

Improved hydrogen evolution performance of Ni-based nanoporous catalyst with Mo and B co-addition.

The exploration of efficient and stable noble-metal-free electrocatalysts for hydrogen evolution reaction (HER) is of great interest for the development of electrochemical hydrogen production technologies. Herein, nanoporous Ni-based catalyst with Mo and B co-addition (NiMoB) prepared by dealloying is reported as an efficient electrocatalysts for HER. The nanoporous NiMoB achieves an overpotential of 31 mV at 10 mA cm-2, along with exceptional catalytic stability in alkaline electrolyte. Density functional theory (DFT) calculations reveal that the incorporation of Mo and B can synergistically optimize the electronic structure and regulate the adsorption of HER intermediates on the Ni active site, thus accelerating the HER kinetics. This study provides a new perspective for the development of non-precious Ni-based catalysts towards efficient hydrogen energy conversion.

Gene engineered exosome reverses T cell exhaustion in cancer immunotherapy.

Cancer patients by immune checkpoint therapy have achieved long-term remission, with no recurrence of clinical symptoms of cancer for many years. Nevertheless, more than half of cancer patients are not responsive to this therapy due to immune exhaustion. Here, we report a novel gene engineered exosome which is rationally designed by engineering PD1 gene and simultaneously enveloping an immune adjuvant imiquimod (PD1-Imi Exo) for boosting response of cancer immune checkpoint blockage therapy. The results showed that PD1-Imi Exo had a vesicular round shape (approximately 139 nm), revealed a significant targeting and a strong binding effect with both cancer cell and dendritic cell, and demonstrated a remarkable therapeutic efficacy in the melanoma-bearing mice and in the breast cancer-bearing mice. The mechanism was associated with two facts that PD1-Imi Exo blocked the binding of CD8+ T cell with cancer cell, displaying a PD1/PDL1 immune checkpoint blockage effect, and that imiquimod released from PD1-Imi Exo promoted the maturation of immature dendritic cell, exhibiting a reversing effect on the immune exhaustion through activating and restoring function of CD8+ T cell. In conclusion, the gene engineered exosome could be used for reversing T cell exhaustion in cancer immunotherapy. This study also offers a promising new strategy for enhancing PD1/PDL1 therapeutic efficacy, preventing tumor recurrence or metastasis after surgery by rebuilding the patients' immunity, thus consolidating the overall prognosis.

Effect of Platelet-Rich Plasma Addition on the Chemical Properties and Biological Activity of Calcium Sulfate Hemihydrate Bone Cement.

Currently, platelet-rich plasma (PRP) is an attractive additive for bone repair materials. PRP could enhance the osteoconductive and osteoinductive of bone cement, as well as modulate the degradation rate of calcium sulfate hemihydrate (CSH). The focus of this study was to investigate the effect of different PRP ratios (P1: 20 vol%, P2: 40 vol%, and P3: 60 vol%) on the chemical properties and biological activity of bone cement. The injectability and compressive strength of the experimental group were significantly higher than those of the control. On the other hand, the addition of PRP decreased the crystal size of CSH and prolonged the degradation time. More importantly, the cell proliferation of L929 and MC3T3-E1 cells was promoted. Furthermore, qRT-PCR, alizarin red staining, and western blot analyses showed that the expressions of osteocalcin (OCN) and Runt-related transcription factor 2 (Runx2) genes and ß-catenin protein were up-regulated, and mineralization of extracellular matrix was enhanced. Overall, this study provided insight into how to improve the biological activity of bone cement through PRP incorporation.

Flexible free-standing antibacterial nanoporous Ag ribbon.

The biomedical field has the potential to significantly benefit from the use of flexible free-standing Ag nanostructures due to their outstanding mechanical and antibacterial properties. However, the intricate process of synthesizing these nanostructures, as well as the potential toxicity of nanostructured Ag, pose significant challenges. This study used a facile etching method to synthesize the free-standing nanoporous Ag (NP-Ag) ribbons with a homogeneous and bicontinuous three-dimensional ligament structure. The free-standing NP-Ag ribbons demonstrated stable mechanical performance and excellent flexibility when subjected to various deformation states on artificial fingers. Additionally, the NP-Ag ribbons exhibited remarkable antibacterial capacity with rates of 99.81 ± 0.14% against Escherichia coli, 96.11 ± 1.49% against Staphylococcus aureus, and 95.37 ± 1.24% against methicillin-resistant Staphylococcus aureus. The antibacterial mechanism of NP-Ag is attributed to the rapid release of Ag ions (Ag+) in 24 h, causing damage to the bacterial membrane. Moreover, the in vivo results demonstrate that the NP-Ag ribbons provide rapid antibacterial efficacy and are biosafe due to the long-term stable Ag+ release of NP-Ag. The development of these free-standing flexible NP-Ag ribbons offers a new avenue for wearable antibacterial applications.