RESUMEN
PURPOSE: The purpose of this study was to investigate the outcomes of conservative treatment for recurrent shoulder dislocation without subjective apprehension, despite the presence of a Bankart lesion or glenoid defect. METHODS: A retrospective analysis was performed for 92 patients with recurrent shoulder dislocation treated with conservative treatment due to negative apprehension between 2009 and 2018. The failure of the conservative treatment was defined as a dislocation or subluxation episode or subjective feeling of instability based on a positive apprehension. The Kaplan-Meier method was used to estimate failure rates over time, and a receiver operating characteristic (ROC) curve was constructed to determine a cut-off value for a glenoid defect. The clinical outcomes were compared between patients who completed conservative treatment without recurrence of instability (Group A) and those who failed and subsequently underwent surgical treatment (Group B) using shoulder functional scores and sports/recreation activity level. RESULTS: This retrospective study included 61 of 92 eligible patients with recurrent shoulder dislocation. Among the 61 patients, conservative treatment failed in 46 (75.4%) over the 2-year study period. The cut-off value for a glenoid defect was 14.4%. The association between glenoid defect size (≥ 14.4% or as a continuous variable) and survival was statistically significant (p = 0.039 and p < 0.001, respectively). The mean glenoid defect size in Group B increased from 14.6 ± 3.0% to 17.3 ± 3.1% (p < 0.001), and clinical outcomes for Group A were inferior to those for Group B at the 24-month follow-up. CONCLUSIONS: Conservative treatment for recurrent shoulder dislocation in patients without subjective apprehension showed a high failure rate during the study period, especially if the glenoid defect was ≥ 14.4% in size. Despite clinical improvement in patients who completed conservative treatment without recurrence, functional outcome scores and sport/recreation activity levels were better in the patients who underwent arthroscopic Bankart repair. Therefore, for recurrent anterior shoulder instability, even without subjective apprehension, surgical treatment is warranted over conservative treatment. LEVEL OF EVIDENCE: Level IV.
Asunto(s)
Inestabilidad de la Articulación , Luxación del Hombro , Articulación del Hombro , Humanos , Luxación del Hombro/diagnóstico , Luxación del Hombro/cirugía , Articulación del Hombro/cirugía , Estudios Retrospectivos , Inestabilidad de la Articulación/cirugía , Inestabilidad de la Articulación/etiología , Tratamiento Conservador , Artroscopía/métodos , Examen Físico , RecurrenciaRESUMEN
INTRODUCTION: To investigate (1) the prevalence of "hidden lesions" and "non-hidden lesions" of subscapularis tendon tears requiring repair during arthroscopic examination that would be missed by a 30° arthroscope, but could be identified by a 70° arthroscope, from the standard posterior portal and (2) the correlation of preoperative internal rotation weakness and findings of magnetic resonance imaging (MRI) indicating hidden lesions. MATERIALS AND METHODS: We retrospectively examined 430 patients who underwent arthroscopic subscapularis repair between was initially nonvisible with a 30° arthroscope but became visible only with a 70° arthroscope from the standard posterior portal. The preoperative and intraoperative findings of the hidden lesion group (n = 82) were compared with those of the non-hidden lesion group (n = 348). 2016 and 2020. A hidden lesion was defined as a subscapularis tendon tear requiring repair that preoperative internal rotation weakness was assessed using the modified belly-press test. Preoperative MR images were reviewed using a systemic approach. RESULTS: The prevalence of hidden lesions was 19.1% (82/430). No significant difference was found in preoperative internal rotation weakness between the groups. Preoperative MRI showed a significantly lower detection rate in the hidden lesion group than in the non-hidden group (69.5% vs. 84.8%; P = 0.001). The hidden lesions were at a significantly earlier stage of subscapularis tendon tears than the non-hidden lesions, as revealed by the arthroscopic findings (Lafosse classification, degree of retraction; P = 0.003 for both) and MR findings (muscle atrophy, fatty infiltration; P = 0.001, P = 0.005, respectively). CONCLUSIONS: Among the subscapularis tears requiring repair, 19.1% could be identified by a 70° arthroscope, but not by a 30° arthroscope, through the posterior portal. The hidden lesions showed a significantly lower detection rate on preoperative MRI than the non-hidden lesions. Thus, for subscapularis tears suspected on preoperative physical examination, the 70° arthroscope would be helpful to avoid a misdiagnosis.
Asunto(s)
Lesiones del Manguito de los Rotadores , Traumatismos de los Tendones , Humanos , Manguito de los Rotadores/cirugía , Traumatismos de los Tendones/diagnóstico por imagen , Traumatismos de los Tendones/cirugía , Estudios Retrospectivos , Artroscopía/métodos , Músculo Esquelético/patología , Imagen por Resonancia Magnética , Lesiones del Manguito de los Rotadores/diagnóstico por imagen , Lesiones del Manguito de los Rotadores/cirugíaRESUMEN
INTRODUCTION: There have been no previous studies comparing serial radiologic results between primary and revision Bankart repair despite the significance of capsulolabral height and slope restoration. The purpose of this study was (1) to compare serially the height and slope of the repaired labrum in the early postoperative period among primary and revision Bankart repair groups, and (2) to compare clinical outcomes between the two groups. MATERIALS AND METHODS: This study included each 24 patients who underwent arthroscopic primary Bankart repair (Group A) and revision Bankart repair (Group B) matched by age, sex, and glenoid defect ratio. Postoperative serial radiologic assessment of the repaired labral height and slope was proceeded using magnetic resonance imaging (MRI) or computed tomographic arthrography (CTA) at 3 weeks and 6 months. RESULTS: There were no significant differences in labral height and slope at 3 weeks and 6 months postoperatively in Group A. However, significant reductions in labral height and slope were evident between 3 weeks and 6 months postoperatively in Group B (P < 0.05). Group A yielded superior results to Group B with respect to labral height and slope at each time point (P < 0.05) in between-group analyses. The clinical outcomes were not significantly different between the two groups except for the patients' return to their premorbid sports activity level (P = 0.024). CONCLUSIONS: The height and slope of the repaired capsulolabral structures in the early postoperative period after arthroscopic revision Bankart repair group were significantly lower than those of the primary Bankart repair group. Also the reduction of labral height and slope was significant in the revision Bankart repair group over time. Nonetheless, clinical outcomes did not differ significantly except return to premorbid sports activity level at final follow-up.
Asunto(s)
Inestabilidad de la Articulación , Luxación del Hombro , Articulación del Hombro , Humanos , Articulación del Hombro/cirugía , Articulación del Hombro/diagnóstico por imagen , Análisis por Apareamiento , Inestabilidad de la Articulación/cirugía , Artrografía , Imagen por Resonancia Magnética , Artroscopía/métodos , Luxación del Hombro/cirugía , RecurrenciaRESUMEN
INTRODUCTION: Bosworth described an unusual fracture dislocation of the ankle with fixed posterior fracture dislocation of the fibula. This ankle fracture variant is often not recognized in initial radiographs and requires a computed tomographic scan for verification. It is usually not reducible by the closed method, and repeated trials induce more damage. The purpose of this study was to verify the usefulness of simple external oblique radiographs for diagnosis of Bosworth-type fracture. METHODS: We reviewed the 327 patients who were diagnosed as unilateral malleolus ankle fracture in 2002 to 2012. Four cases of Bosworth-type fracture were identified. External oblique radiograph was taken initially, immediately after first closed reduction, and after open reduction (3 phases) was undertaken to check the position of fibula in relation with the talus. Fifty cases of bimalleolar fractures and unaffected ankle were compared. Longitudinal bisecting line along the proximal fibula was drawn, and the talus was divided in 2 parts. Anterior and posterior part of the talus was defined as part α and ß. The ratio resulted from dividing α with (α + ß) implies the fibula position relative to the talus. RESULTS: Mean α/(α + ß) ratio of each phase were 0.4994, 0.4891, 0.2875, 0.2698, and 0.2709. There was significant difference in initial and first reduction phase of Bosworth-type fracture than other groups (P = < .0001). There was no significant difference in open reduced Bosworth-type fracture with bimalleolar fractures and unaffected ankles (P = .528, .602). CONCLUSIONS: An external oblique radiograph provides useful information that can differentiate Bosworth-type fracture from other reducible bimalleolar fractures.
Asunto(s)
Traumatismos del Tobillo/diagnóstico por imagen , Traumatismos del Tobillo/terapia , Fijación de Fractura/métodos , Fracturas Óseas/diagnóstico por imagen , Fracturas Óseas/terapia , Adulto , Servicio de Urgencia en Hospital , Femenino , Humanos , Masculino , Persona de Mediana Edad , Radiografía , Estudios Retrospectivos , Resultado del TratamientoRESUMEN
Periprosthetic fractures are a serious complication of joint replacement surgery. With the growing prevalence of reverse total shoulder arthroplasty (RTSA), the incidence of relatively uncommon periprosthetic humeral fractures has increased. Here, we present the unique case of a 74-year-old woman who developed atrophic non-union after plate osteosynthesis for a periprosthetic fracture associated with RTSA. Fixation failure was evident 3 months after the surgical intervention; the patient underwent a 3-month course of arm sling immobilization. However, bone resorption continued, and varus angulation of the fracture developed. In this case, surgical strategy involved the use of long proximal humerus internal locked system plate (DePuy Synthes, Paoli, PA, USA), augmented with autologous iliac bone graft and allogenic humerus structural bone graft with the "bamboo support technique", fixed with Cable System (DePuy Synthes, Paoli, PA, USA). No reports have addressed the management of failed periprosthetic fractures using allogeneic humeral strut bone grafts. This report aims to fill the gap by presenting a novel surgical technique for the management of periprosthetic fractures associated with RTSA in case of treatment failure.
RESUMEN
In conservative treatment for proximal humerus fractures (PHFs), the immobilization position of the affected arm should not be determined uniformly. The aim of this study is to investigate the optimal immobilization position for conservative treatment of different types of PHFs. We hypothesized that the optimal position minimizing the deforming force in PHFs depends on the fracture components involved. PHF models involving either the surgical neck (SN) or greater tuberosity (GT) were created using 12 fresh-frozen cadaveric shoulders. In the SN model, the deforming forces on the pectoralis major muscle were measured in full adduction by increasing external rotation. In the GT model, the deforming force of the supraspinatus muscle was measured in neutral rotation by decreasing abduction, and the deforming force of the infraspinatus muscle was measured in full adduction by increasing internal rotation, respectively. In the SN model, the deforming force of the pectoralis major muscle increased significantly with external rotation from full internal rotation to neutral rotation (P = 0.006), indicating that the arm should be placed in full internal rotation. In the GT model, the deforming force of the supraspinatus muscle increased significantly with adduction from 45° of abduction to full adduction (P = 0.006); the deforming force of the infraspinatus muscle increased significantly with internal rotation from neutral rotation to full internal rotation (P = 0.006). These findings should be considered when placing the arm in abduction and neutral rotation so as to minimize the deforming force by either the supra or infraspinatus muscle. In conservative treatment for PHFs, the affected arm should be placed in a position that minimizes the deforming force on the fracture components involved.
Asunto(s)
Cadáver , Tratamiento Conservador , Fracturas del Hombro , Humanos , Fracturas del Hombro/terapia , Fenómenos Biomecánicos , Anciano , Masculino , Femenino , Tratamiento Conservador/métodos , Anciano de 80 o más Años , Inmovilización/métodos , Persona de Mediana Edad , Rango del Movimiento ArticularRESUMEN
BACKGROUND: Cigarette smoking impairs rotator cuff healing, but no study, to our knowledge, has focused on the association between heated tobacco products and rotator cuff tears. METHODS: This study retrospectively investigated 1,133 patients who underwent arthroscopic repair of symptomatic rotator cuff tears between March 2011 and April 2021. Patients were grouped on the basis of their smoking patterns as nonsmokers, cigarette smokers, and heated tobacco smokers. Propensity score matching was used to reduce selection bias, and 45 subjects were selected from each group via 1:1:1 matching. Functional scores and active range of motion were compared among the 3 groups preoperatively and at a 2-year follow-up. Postoperative magnetic resonance imaging was performed 6 months after the surgical procedure to assess structural integrity. RESULTS: Except for sex, similar baseline characteristics were achieved after propensity score matching. There were no differences in the clinical scores or range of motion between the matched groups either preoperatively or at the 2-year follow-up. However, the retear rate for the matched nonsmoker group was significantly lower (8.9%) than those for the matched cigarette smoker group (31.1%) and the heated tobacco smoker group (28.9%) (p = 0.022). Multivariable logistic regression analysis revealed that the retear rates were 3.403 times higher for the cigarette smoker group and 3.397 times higher for the heated tobacco smoker group than that for the nonsmoker group. CONCLUSIONS: Heated tobacco users, like conventional cigarette smokers, have worse clinical outcomes with respect to rotator cuff healing than nonsmokers. Regardless of the type of cigarette, abstinence from smoking is necessary for patients undergoing rotator cuff repair surgery. LEVEL OF EVIDENCE: Prognostic Level III . See Instructions for Authors for a complete description of levels of evidence.
Asunto(s)
Lesiones del Manguito de los Rotadores , Productos de Tabaco , Humanos , Masculino , Femenino , Lesiones del Manguito de los Rotadores/cirugía , Persona de Mediana Edad , Estudios Retrospectivos , Productos de Tabaco/efectos adversos , Rango del Movimiento Articular , Anciano , Calor/efectos adversos , Artroscopía , Cicatrización de Heridas/fisiología , AdultoRESUMEN
BACKGROUND: Few clinical studies have addressed concavity restoration by natural remodeling after a Latarjet procedure. This study investigated the fibrous tissue and osseous remodeling of the reconstructed glenoid and concavity restoration after a Latarjet procedure using postoperative computed tomographic arthrography (CTA). METHODS: This retrospective study included 31 patients who underwent immediate postoperative computed tomographic (CT) scanning followed by CTA at 6 months postoperatively. We investigated whether fibrous tissue was newly created over the graft, whether the created fibrous tissue restored the congruity of the articular surface and the osseous remodeling of the graft to the glenoid level (whether the osseous portion of the graft was remodeled flush to the glenoid level) and the concavity of the glenoid using the radius of a best-fit circle on the articular surface, and the relationship between the amount of created fibrous tissue and the position of the graft. RESULTS: In all patients, the fibrous tissue on the graft yielded a smooth articular surface, as revealed by the CTA. The mean radius of the entire glenoid, including the transferred graft, was significantly smaller (p = 0.010) at 33.2 ± 8.5 mm than that of the glenoid posterior to the osseous step-off at 37.6 ± 9.4 mm, which is presumed to be the glenoid before the surgical procedure. Despite the congruity of the articular surfaces due to fibrous tissue seen in the CTA, 14 (45%) of 31 patients showed a subchondral osseous step-off on either the medial side or the lateral side in the immediate postoperative CT scans. However, through osseous remodeling, 8 of the 10 grafts with a lateral step-off and 2 of the 4 grafts with a medial step-off converted to a flush position. The position of the step-off was correlated with the thickness of the fibrous tissue, with a tendency for thicker tissue in cases of a step-off on the medial side (p = 0.014). CONCLUSIONS: Fibrous tissue formation plus remodeling of the transferred graft resulted in the restoration of a congruent concavity after a Latarjet procedure by compensating for initially non-flush positioning of the graft. However, due to the small sample size in our study, clinical outcomes could not be correlated with radiographic findings, and our recommendation is to continue placing the graft as anatomically as possible. LEVEL OF EVIDENCE: Therapeutic Level IV . See Instructions for Authors for a complete description of levels of evidence.
Asunto(s)
Inestabilidad de la Articulación , Articulación del Hombro , Humanos , Articulación del Hombro/diagnóstico por imagen , Articulación del Hombro/cirugía , Estudios Retrospectivos , Inestabilidad de la Articulación/cirugía , Escápula/cirugía , Artroplastia/métodos , Trasplante Óseo/métodosRESUMEN
BACKGROUND: In the setting of periprosthetic humeral fractures, the humeral stem of the implant represents a substantial challenge to the optimal method of proximal fixation. This study aimed to compare the initial biomechanical stability provided by cerclage cables with a locking plate insert versus bicortical locking screws (i.e., the gold standard for fixation) in fresh cadaveric humeri. METHODS: After calculating the sample size, we utilized 10 sets of cadaveric specimens and created a 5-mm osteotomy gap 120 mm distal to the tip of the greater tuberosity, simulating a Wright and Cofield type-B periprosthetic humeral fracture on each specimen. Using 3 locking screws for distal fragment fixation, identical in all specimens, the specimens were assigned to Group A (3 cerclage cables with a plate insert) or Group B (3 locking bicortical screws) for proximal fragment fixation. Biomechanical tests included stiffness in varus and valgus bending, torsion, and axial compression, and a single load to failure. RESULTS: No significant differences were observed in the biomechanical metrics between the 2 groups. CONCLUSIONS: Our study revealed that fixation with use of cerclage cables with a plate insert demonstrated biomechanical stability comparable with that of bicortical locking screw fixation when addressing the proximal fragment in Wright and Cofield type-B periprosthetic humeral fractures. CLINICAL RELEVANCE: For proximal fragment fixation of periprosthetic humeral fractures, cerclage cables with a plate insert can be utilized as an effective fixation method that offers initial fixation strength that is comparable to the use of 3 locking bicortical screws.
Asunto(s)
Placas Óseas , Tornillos Óseos , Cadáver , Fijación Interna de Fracturas , Fracturas Periprotésicas , Humanos , Fracturas Periprotésicas/cirugía , Fracturas Periprotésicas/etiología , Fijación Interna de Fracturas/instrumentación , Fijación Interna de Fracturas/métodos , Fijación Interna de Fracturas/efectos adversos , Fenómenos Biomecánicos , Anciano , Femenino , Masculino , Fracturas del Húmero/cirugía , Anciano de 80 o más AñosRESUMEN
Background/Objectives: Intravenous dexmedetomidine (DEX) can increase the analgesia duration of peripheral nerve block; however, its effect in combination with superior trunk block (STB) remains unclear. We examined whether combining single-shot STB (SSTB) with intravenous DEX would provide noninferior postoperative analgesia comparable to that provided by continuous STB (CSTB). Methods: Ninety-two patients scheduled for elective arthroscopic rotator cuff repair were enrolled in this prospective randomized trial. Patients were randomly assigned to the CSTB or SSTB + DEX group. Postoperatively, each CSTB group patient received 15 mL of 0.5% ropivacaine and a continuous 0.2% ropivacaine infusion. Each SSTB group patient received a 15 mL postoperative bolus injection of 0.5% ropivacaine. DEX was administered at 2 mcg/kg for 30 min post anesthesia, then maintained at 0.5 mcg/kg/h till surgery ended. Pain scores were investigated every 12 h for 48 h post operation, with evaluation of rebound pain incidence and opioid consumption. Results: The SSTB + DEX group had significantly higher median pain scores at 12 h post operation (resting pain, 8.0 vs. 3.0; movement pain, 8.0 vs. 5.0) and a higher incidence of rebound pain (56% vs. 20%) than the CSTB group. However, no significant between-group differences were observed in pain scores postoperatively at 24, 36, or 48 h. The CSTB group required less opioids and fewer rescue analgesics within 12-24 h post operation than the SSTB + DEX group. Conclusions: Compared with CSTB, SSTB + DEX required additional adjuvant or multimodal analgesics to reduce the risk and intensity of postoperative rebound pain in patients who underwent arthroscopic rotator cuff repair.
RESUMEN
This study aims to comprehensively review the current literatures about robot-assisted techniques for shoulder joint arthroplasty and also in experimental articles or case series about around shoulder soft tissue surgeries including arthroscopy, tendon transfer and brachial plexus surgeries. This article evaluates the existing literature and clinical studies to suggests future direction of robotic-assisted techniques in shoulder joint surgeries. Robotic surgery has emerged as an innovative and transformative technology in orthopedics, offering advancements in surgical precision and optimization particularly during total hip and knee arthroplasty. In shoulder joint, patients specific instrumentation with preoperative planning and intraoperative navigation system are being used. Robotic-assisted shoulder arthroplasty will be introduced. In soft tissue surgery, robot-assisted tendon transfer and around brachial plexus surgeries is being clinically tried. In additions, postoperative robot-assisted rehabilitation after may have potential advantages. With the overall development of several industries including robotic technology, robot-assisted pre-, intra- and post-operative techniques could be an essential part of the overall shoulder surgery. However, further research and larger-scale studies are needed to establish its long-term efficacy, and potential complications.
RESUMEN
BACKGROUND: No study has evaluated whether best-fit circles based on glenoids with defects accurately represent normal inferior glenoids before injury. PURPOSE: To investigate whether the best-fit circles on the affected side with a glenoid defect can accurately represent native glenoids before injury. STUDY DESIGN: Cohort study (diagnosis); Level of evidence, 3. METHODS: This retrospective study included 58 patients with unilateral recurrent anterior shoulder instability. First, we compared the diameter of best-fit circles based on affected and unaffected glenoids. Glenoid defect sizes based on each best-fit circle were then calculated and compared. Second, we created serial virtual glenoid defects (10%, 15%, 20%, 25%) on unaffected glenoids and compared diameters of best-fit circles on the glenoids before and after virtual defects. We also analyzed and compared the size of virtual and calculated glenoid defects. Bland-Altman plots and intraclass coefficients (ICCs) were used to compare and analyze agreement of measurements. After categorization of glenoid defects based on clinical cutoff values, Cohen κ and percentage agreement were calculated. RESULTS: The diameter of 55.2% (32/58) of best-fit circles from affected glenoids over- or underestimated the diameter on the unaffected side by >5%. In 28 of the 32 patients, the diameter of the affected side circle was overestimated. Consequently, 41.4% (24/58) of glenoid defects were over- or underestimated by >5%. In 19 of the 24 patients, the glenoid defect from the affected side was >5% larger. ICCs between sides for best-fit circle diameters and defect sizes were 0.632 and 0.800, respectively. Agreement of glenoid defect size between sides was 58.6% (34/58) overall, but when the defect was ≥10%, agreement decreased to 32.3% (10/31). Among 232 glenoids with virtual defects created from 58 normal glenoids, the diameter of 31.0% (72/232) of best-fit circles and the size of 11.6% (27/232) of defects were over- or underestimated by >5%. CONCLUSION: When assessing glenoid defects in anterior shoulder instability, best-fit circles based on affected glenoids do not always represent the native glenoid and may thus lead to inaccurate circle sizes and defect estimates.
Asunto(s)
Inestabilidad de la Articulación , Articulación del Hombro , Humanos , Hombro , Articulación del Hombro/diagnóstico por imagen , Estudios de Cohortes , Estudios Retrospectivos , Inestabilidad de la Articulación/diagnóstico , Tomografía Computarizada por Rayos X/métodos , Imagenología TridimensionalRESUMEN
No studies have evaluated the effect of fibular strut augmentation on the stability of locking plate fixation for osteoporotic proximal humeral fractures with lateral wall comminution. The purpose of this study was to evaluate the stability of locking plate fixation with a fibular strut graft compared with locking plate alone in an osteoporotic two-part surgical neck fracture model with lateral cortex comminution. Ten paired fresh-frozen cadaveric humeri were randomly allocated into two groups, either the locking plate alone (LP group) or locking plate with fibular strut graft augmentation (LPFSG group), with an equal number of right and left osteoporotic surgical neck fractures with lateral wall comminution of the greater tuberosity. Varus, internal/external torsion, and axial compression stiffness as well as single load to failure were measured in plate-bone constructs, and the LPFSG group showed significantly greater values in all metrics. In conclusion, this biomechanical study shows that fibular strut augmentation significantly enhances varus stiffness, internal torsion stiffness, external torsion stiffness, and maximum failure load of a construct compared to locking plate fixation alone in proximal humeral fractures with lateral wall comminution.
Asunto(s)
Fracturas Osteoporóticas , Fracturas del Hombro , Humanos , Benchmarking , Epífisis , Húmero/cirugía , Fracturas del Hombro/cirugíaRESUMEN
Trapeziometacarpal arthrodesis is used for the treatment of advanced arthritis. Insufficient stabilization of the joint may lead to nonunion or hardware problems after arthrodesis. The purpose of this study was to compare the biomechanical properties of dorsal versus radial plate fixation of the trapeziometacarpal joint in ten pairs of fresh-frozen cadaveric hands. The biomechanical performance of each group was measured for stiffness in extension and flexion and load to failure using cantilever bending tests. The stiffness in extension was lower in the dorsally positioned group than in the radially positioned group (12.1 versus 15.2 N/mm, respectively). Load to failure was comparable between both groups (53.9 versus 50.9 N, respectively). A radially positioned locking plate for trapeziometacarpal arthrodesis may be biomechanically advantageous.
RESUMEN
BACKGROUND: The buddy anchor technique is useful to reinforce loose anchors in the osteoporotic humeral head during arthroscopic rotator cuff repair. However, theoretical parallel insertion of the buddy anchor to index a loose anchor is challenging in arthroscopy and can widen the entry site and decrease structural integrity. PURPOSE: To investigate and compare the biomechanical stability between 2 buddy anchor insertion techniques (parallel insertion vs divergent insertion) in the osteoporotic humeral head. STUDY DESIGN: Controlled laboratory study. METHODS: A total of 24 paired fresh-frozen cadaveric shoulders were used, and each pair was randomly assigned to either the parallel insertion group or the divergent insertion group. In the parallel insertion group, the buddy anchor was inserted parallel to the index loose anchor. In the divergent insertion group, the buddy anchor was inserted at a 20° angle in the medial direction to the index loose anchor. The insertion torque of the buddy anchor and ultimate pull-out strength of the index anchor were measured and compared between the 2 groups. RESULTS: The mean maximum insertion torque was significantly higher in the parallel insertion group (16.1 ± 1.8 cN·m) compared with the divergent insertion group (12.0 ± 1.5 cN·m) (P < .001). The mean ultimate pull-out strength was significantly higher with divergent insertion (192.2 ± 28.6 N) than with parallel insertion (147.7 ± 23.6 N) (P < .001). CONCLUSION: For application of the buddy anchor system in the cadaveric osteoporotic humeral bone model, divergent insertion showed better ultimate pull-out strength than conventional parallel insertion, despite inferior maximum insertion torque. CLINICAL RELEVANCE: The results of this study widen the applicability and accessibility for the buddy anchor system.
Asunto(s)
Lesiones del Manguito de los Rotadores , Anclas para Sutura , Fenómenos Biomecánicos , Cadáver , Humanos , Cabeza Humeral/cirugía , Manguito de los Rotadores/cirugía , Lesiones del Manguito de los Rotadores/cirugía , Técnicas de Sutura , TorqueRESUMEN
BACKGROUND: Extra-articular distal humerus locking plates (EADHPs) are precontoured anatomical plates widely used to repair distal humeral extra-articular diaphyseal fractures. However, EADHPs frequently cause distal protrusion and resulting skin discomfort. The purpose of this study was to predict the occurrence of anatomic fit mismatch. We hypothesized that the smaller the humerus size, the greater the anatomic fit mismatch with EADHP. METHODS: Twenty humeri were analyzed in this study. Humeral length and distal humeral width were used as parameters of humeral size. Plate protrusion was measured between the EADHP distal tip and the distal humerus. We set the level of unacceptable EADHP anatomic fit mismatch as ≥10 mm plate protrusion. RESULTS: A significant negative linear correlation was also confirmed between humeral size and plate protrusion, with a coefficient of determination of 0.477 for humeral length and 0.814 for distal humeral width. The cutoff value of humeral length to avoid ≥10 mm plate protrusion was 293.6 mm (sensitivity, 88.9%; specificity, 81.8%) and for distal humeral width was 60.5 mm (sensitivity, 100%; specificity, 81.8%). CONCLUSIONS: Anatomic fit mismatch in distal humeral fractures after EADHP fixation has a negative linear correlation with humeral length and distal humeral width. For patients with a distal humeral width <60.5 mm, ≥10 mm plate protrusion will occur when an EADHP is used, and an alternative implant or approach should be considered.
RESUMEN
BACKGROUND: Excessive general joint laxity, a negative prognostic factor in joint instability, has not been studied to determine its relationship with bipolar bone loss in anterior shoulder instability. PURPOSE/HYPOTHESIS: This study aimed to investigate the characteristics of bipolar bone defects in the presence of excessive joint laxity and the clinical outcomes based on the on-track/off-track theory. We hypothesized that (1) patients with excessive joint laxity might have less significant bipolar bone defects compared with those without excessive joint laxity and (2) no significant difference would be found in the clinical outcomes, including recurrence rate. STUDY DESIGN: Cohort study; Level of evidence, 3. METHODS: This study included 81 patients who had undergone arthroscopic Bankart repair, with (group L; n = 33) or without (group N; n = 48) excessive joint laxity. The presence of excessive joint laxity was defined as a score of ≥4 using Beighton and Horan criteria preoperatively. Bipolar bone lesions were assessed using preoperative 3-dimensional computed tomography. Additional remplissage was performed for cases with off-track or positive engagement test in borderline on-track lesions. The functional outcomes at the 2-year follow-up were assessed using the recurrence rate, Subjective Shoulder Value, Rowe score, University of California Los Angeles shoulder score, active range of motion, and the sports/recreation activity level. RESULTS: No significant difference was found in the glenoid bone defect between groups (14.1%, group L; 14.4%, group N). Off-track lesions were identified in 39.4% (13/33) of group L and 14.6% (7/48) of group N (P = .011). The mean Hill-Sachs interval to glenoid track ratio was 83.1% in group L and 75.2% in group N (P = .021). Additional remplissage procedures were more frequently performed in group L (48.5%; 16/33) than in group N (16.7%; 8/48) (P = .002). However, no significant difference was observed in the shoulder functional scores and recurrence rates between the groups. CONCLUSION: Patients with anterior shoulder instability and excessive joint laxity had significantly wider Hill-Sachs lesions and more off-track lesions than did those with normal joint laxity despite the lack of a significant difference in the glenoid bone defect. However, these differences in the Hill-Sachs lesion were not related to differences in the functional outcomes between the groups.
Asunto(s)
Lesiones de Bankart , Inestabilidad de la Articulación , Luxación del Hombro , Articulación del Hombro , Artroscopía , Estudios de Cohortes , Humanos , Inestabilidad de la Articulación/cirugía , Recurrencia , Hombro , Luxación del Hombro/diagnóstico por imagen , Luxación del Hombro/cirugía , Articulación del Hombro/diagnóstico por imagen , Articulación del Hombro/cirugíaRESUMEN
The extra-articular distal humerus locking plate (EADHP) is widely used for distal extra-articular diaphyseal humeral fracture fixation. However, it occasionally causes skin prominence and discomfort. The upside-down use of a proximal humerus internal locking system (PHILOS) plate is suggested as an alternative option, but it lacks biomechanical evidence. The purpose of this study was to compare the biomechanical performance between two different fixation methods: the modified use of the PHILOS plate on the anterior cortex versus conventional use of an EADHP on the posterior cortex. Twelve pairs of fresh-frozen cadaveric humeri were used and 7 mm gap osteotomy was performed at 50 mm proximal to the lateral epicondyle to simulate an AO/OTA 12-C1.3 fracture type. Single load to failure was measured after five stiffness tests of the plate-bone constructs in anterior/posterior bending, internal/external torsion, and axial compression. There were no significant differences in metrics between the two groups, except for the load to failure in posterior bending, which was significantly higher for PHILOS (1589.3 ± 234.5) compared to EADHP (1430.1 ± 188.6), p < .023. In conclusion, the modified use of the PHILOS plate showed comparable biomechanical performance compared to the conventional EADHP. The new fixation method offers potential clinical advantages, considering the patient's position and surgical approach at the time of surgery as well as postoperative soft tissue irritation. Therefore, this could be an option for distal humeral extra-articular diaphyseal fracture fixation when the use of EADHP is not suitable or preferred.
Asunto(s)
Fracturas del Húmero , Fenómenos Biomecánicos , Placas Óseas , Fijación Interna de Fracturas/métodos , Humanos , Fracturas del Húmero/cirugía , Húmero/cirugíaRESUMEN
Bisphosphonate, a potent anti-resorptive agent, is generally accepted as a safe, effective, well tolerated treatment for postmenopausal osteoporosis. Atypical femoral fracture (AFF) and bisphosphonate related osteonecrosis of jaw (BRONJ) are the increasing morbidities in patients treated with long term bisphosphonate. Pathogenic mechanisms of AFF and BRONJ are not fully identified and not identical. We report a case of BRONJ followed by AFF and its nonunion in a 67-year-old woman patient receiving an oral bisphosphonate during 7 years for the treatment of osteoporosis.