Biosafety of human environments can be supported by effective use of renewable biomass.

Preventing pathogenic viral and bacterial transmission in the human environment is critical, especially in potential outbreaks that may be caused by the release of ancient bacteria currently trapped in the permafrost. Existing commercial disinfectants present issues such as a high carbon footprint. This study proposes a sustainable alternative, a bioliquid derived from biomass prepared by hydrothermal liquefaction. Results indicate a high inactivation rate of pathogenic virus and bacteria by the as-prepared bioliquid, such as up to 99.99% for H1N1, H5N1, H7N9 influenza A virus, and Bacillus subtilis var. niger spores and 99.49% for Bacillus anthracis Inactivation of Escherichia coli and Staphylococcus epidermidis confirmed that low-molecular-weight and low-polarity compounds in bioliquid are potential antibacterial components. High temperatures promoted the production of antibacterial substances via depolymerization and dehydration reactions. Moreover, bioliquid was innoxious as confirmed by the rabbit skin test, and the cost per kilogram of the bioliquid was $0.04427, which is notably lower than that of commercial disinfectants. This study demonstrates the potential of biomass to support our biosafety with greater environmental sustainability.

Soil calcium prompts organic carbon accumulation after decadal saline-water irrigation in the Taklamakan desert.

Soil organic carbon (SOC), as a crucial measure of soil quality, is typically low in arid regions due to salinization, which is a global issue. How soil organic carbon changes with salinization is not a simple concept, as high salinity simultaneously affects plant inputs and microbial decomposition, which exert opposite effects on SOC accumulation. Meanwhile, salinization could affect SOC by altering soil Ca2+ (a salt component), which stabilizes organic matter via cation bridging, but this process is often overlooked. Here, we aimed to explore i) how soil organic carbon changes with salinization induced by saline-water irrigation and ii) which process drives soil organic carbon content with salinization, plant inputs, microbial decomposition, or soil Ca2+ level. To this end, we assessed SOC content, plant inputs represented by aboveground biomass, microbial decomposition revealed by extracellular enzyme activity, and soil Ca2+ along a salinity gradient (0.60-31.09 g kg-1) in the Taklamakan Desert. We found that, in contrast to our prediction, SOC in the topsoil (0-20 cm) increased with soil salinity, but it did not change with the aboveground biomass of the dominant species (Haloxylon ammodendron) or the activity of three carbon-cycling relevant enzymes (ß-glucosidase, cellulosidase, and N-acetyl-beta-glucosaminidase) along the salinity gradient. Instead, SOC changed positively with soil exchangeable Ca2+, which increased linearly with salinity. These results suggest that soil organic carbon accumulation could be driven by increases in soil exchangeable Ca2+ under salinization in salt-adapted ecosystems. Our study provides empirical evidence for the beneficial impact of soil Ca2+ on organic carbon accumulation in the field under salinization, which is apparent and should not be disregarded. In addition, the management of soil carbon sequestration in salt-affected areas should be taken into account by adjusting the soil exchangeable Ca2+ level.

Thermally assisted layer-layer crosslinking towards programmable evolution of pore structures for tunable electromagnetic response capability.

The research and development of aerogel-based microwave absorbing materials with strong electromagnetic (EM) wave response is an emerging research topic in the EM wave absorption field. In order to implement light microwave absorbers with a broad bandwidth, freeze drying assisted with in situ thermally structure-directing techniques was applied to fabricate composite aerogels with orientation design. Thanks to the integration of pore structure regulation and conductive network construction, the as-prepared aerogel absorbers exhibit a tunable EM response covering a broad frequency range. In detail, the maximum reflection loss (RL) value of the CR-3 aerogel reaches -50.8 dB at 2.2 mm and its maximum effective absorption bandwidth reaches 5.4 GHz at 2.0 mm, which is in accordance with the numerical simulation results of the radar cross section (RCS), where the optimum RCS reduction of 21.4 dB m2 appears for the CR-3 aerogel when the detection theta was set as 0°. In all, this work paves the way for the exploration of high-efficiency aerogel absorbers by balancing the evolution of the pore structure and conductive connection at the same time.

Rare taxa mediate microbial carbon and nutrient limitation in the rhizosphere and bulk soil under sugarcane-peanut intercropping systems.

Introduction: Microbial carbon (C) and nutrient limitation exert key influences on soil organic carbon (SOC) and nutrient cycling through enzyme production for C and nutrient acquisition. However, the intercropping effects on microbial C and nutrient limitation and its driving factors between rhizosphere and bulk soil are unclear. Methods: Therefore, we conducted a field experiment that covered sugarcane-peanut intercropping with sole sugarcane and peanut as controls and to explore microbial C and nutrient limitation based on the vector analysis of enzyme stoichiometry; in addition, microbial diversity was investigated in the rhizosphere and bulk soil. High throughput sequencing was used to analyze soil bacterial and fungal diversity through the 16S rRNA gene and internal transcribed spacer (ITS) gene at a phylum level. Results: Our results showed that sugarcane-peanut intercropping alleviated microbial C limitation in all soils, whereas enhanced microbial phosphorus (P) limitation solely in bulk soil. Microbial P limitation was also stronger in the rhizosphere than in bulk soil. These results revealed that sugarcane-peanut intercropping and rhizosphere promoted soil P decomposition and facilitated soil nutrient cycles. The Pearson correlation results showed that microbial C limitation was primarily correlated with fungal diversity and fungal rare taxa (Rozellomycota, Chyltridiomycota, and Calcarisporiellomycota) in rhizosphere soil and was correlated with bacterial diversity and most rare taxa in bulk soil. Microbial P limitation was solely related to rare taxa (Patescibacteria and Glomeromycota) in rhizosphere soil and related to microbial diversity and most rare taxa in bulk soil. The variation partitioning analysis further indicated that microbial C and P limitation was explained by rare taxa (7%-35%) and the interactions of rare and abundant taxa (65%-93%). Conclusion: This study indicated the different intercropping effects on microbial C and nutrient limitation in the rhizosphere and bulk soil and emphasized the importance of microbial diversity, particularly rare taxa.

Continuous and low-carbon production of biomass flash graphene.

Flash Joule heating (FJH) is an emerging and profitable technology for converting inexhaustible biomass into flash graphene (FG). However, it is challenging to produce biomass FG continuously due to the lack of an integrated device. Furthermore, the high-carbon footprint induced by both excessive energy allocation for massive pyrolytic volatiles release and carbon black utilization in alternating current-FJH (AC-FJH) reaction exacerbates this challenge. Here, we create an integrated automatic system with energy requirement-oriented allocation to achieve continuous biomass FG production with a much lower carbon footprint. The programmable logic controller flexibly coordinated the FJH modular components to realize the turnover of biomass FG production. Furthermore, we propose pyrolysis-FJH nexus to achieve biomass FG production. Initially, we utilize pyrolysis to release biomass pyrolytic volatiles, and subsequently carry out the FJH reaction to focus on optimizing the FG structure. Importantly, biochar with appropriate resistance is self-sufficient to initiate the FJH reaction. Accordingly, the medium-temperature biochar-based FG production without carbon black utilization exhibited low carbon emission (1.9 g CO2-eq g-1 graphene), equivalent to a reduction of up to ~86.1% compared to biomass-based FG production. Undoubtedly, this integrated automatic system assisted by pyrolysis-FJH nexus can facilitate biomass FG into a broad spectrum of applications.

Spatial and temporal regeneration patterns within gaps in the primary forests vs. secondary forests of Northeast China.

Forest gaps play an important role during forest succession in temperate forest ecosystems. However, the differences in spatial distribution and replacement patterns of woody plants (trees and shrubs) between primary and secondary forests remain unclear during the gap-filling processes, especially for temperate forests in Northeast China. We recorded 45,619 regenerated trees and shrubs in young gaps (<10 years), old gaps (10~20 years), and closed forest stands (i.e., filled gaps) in the primary broadleaved Korean pine (Pinus koraiensis Sieb. Rt Zucc.) forests vs. secondary forests (degraded from primary forests). The gap-filling processes along horizontal (Cartesian coordinate system) and vertical (lower layer: 0~5 m, medium layer: 5~10 m, and upper layer: >10 m) dimensions were quantified by shade tolerance groups of trees and shrubs. We found that gap age, competition between species, and pre-existing regeneration status resulted in different species replacement patterns within gaps in primary vs. secondary forests. Gap formation in both primary and secondary forests increased species richness, with 33, 38, 39, and 41 in the primary closed stands, primary forest gaps, secondary closed stands, and secondary forest gaps, respectively. However, only 35.9% of species in primary forest gaps and 34.1% in secondary forest gaps successfully reached the upper layer. Based on the importance values (IVs) of tree species across different canopy heights, light-demanding trees in the upper layer of the secondary forests were gradually replaced by intermediate and shade-tolerant trees. In the primary forests, Korean pine exhibited intermittent growth patterns at different canopy heights, while it had continuous regeneration along vertical height gradients in the secondary forests. The differences in Korean pine regeneration between the primary and secondary forests existed before gap formation and continued during the gap-filling processes. The interspecific competition among different tree species gradually decreased with increasing vertical height, and compared to the primary forests, the secondary forests showed an earlier occurrence of competition exclusion within gaps. Our findings revealed the species replacement patterns within gaps and provided a further understanding of the competition dynamics among tree species during the gap-filling processes.

Rapid self-heating synthesis of Fe-based nanomaterial catalyst for advanced oxidation.

Iron-based catalysts are promising candidates for advanced oxidation process-based wastewater remediation. However, the preparation of these materials often involves complex and energy intensive syntheses. Further, due to the inherent limitations of the preparation conditions, it is challenging to realise the full potential of the catalyst. Herein, we develop an iron-based nanomaterial catalyst via soft carbon assisted flash joule heating (FJH). FJH involves rapid temperature increase, electric shock, and cooling, the process simultaneously transforms a low-grade iron mineral (FeS) and soft carbon into an electron rich nano Fe0/FeS heterostructure embedded in thin-bedded graphene. The process is energy efficient and consumes 34 times less energy than conventional pyrolysis. Density functional theory calculations indicate that the electron delocalization of the FJH-derived heterostructure improves its binding ability with peroxydisulfate via bidentate binuclear model, thereby enhancing ·OH yield for organics mineralization. The Fe-based nanomaterial catalyst exhibits strong catalytic performance over a wide pH range. Similar catalysts can be prepared using other commonly available iron precursors. Finally, we also present a strategy for continuous and automated production of the iron-based nanomaterial catalysts.

Rare Taxa Drive the Response of Soil Fungal Guilds to Soil Salinization in the Taklamakan Desert.

Salinization poses great threats to soil fungal communities that would cause the losses of ecosystems services. Soil fungal communities are composed of different functional guilds such as saprotrophic, symbiotrophic, and pathotrophic fungi, and each guild includes many rare taxa and a few abundant taxa. Despite of low abundance, rare taxa may be crucial in determining the responses of entire soil fungal communities to salinization. However, it remains poorly understood how rare taxa mediate the impacts of soil salinization on soil fungal community structure. Here, we took advantage of a salinity gradient in a desert ecosystem ranging from 0.60 to 31.09 g kg-1 that was created by a 12-year saline-water irrigation and assessed how the rare vs. abundant taxa of soil saprotrophic, symbiotrophic, and pathotrophic fungi respond to soil salinization through changes in the community biodiversity and composition. We found that the rare taxa of soil saprotrophic, symbiotrophic, and pathographic fungi were more sensitive to changes in soil salinity compared to the abundant taxa. In addition, the community composition of rare taxa of the saprotrophic and pathotrophic fungi not the symbiotrophic fungi was positively associated with soil salinity change. However, the symbiotrophic fungi showed greater variations in the species richness along the salinity gradient. These findings highlight the importance to differentiate rare taxa in predicting how the biodiversity and functional groups of soil fungal communities respond to soil salinization.

Impacts of Urbanization Undermine Nestedness of the Plant-Arbuscular Mycorrhizal Fungal Network.

Cities are prone to ecological problems, yet the impacts of rapid global urbanization on the feedback between above- and belowground subsystems remain largely unknown. We sampled the roots of 8 common herbaceous plants within the Fifth Ring (urban areas) and in Jiufeng National Forest Park (rural areas) in Beijing (China) to assess the impacts of urbanization on the network of plant-arbuscular mycorrhizal (AM) fungal associations. Using Illumina MiSeq sequencing, 81 AM fungal OTUs were identified in 78 herb root samples. The Shannon, Simpson, and Pielou indices of root AM fungi in urban areas were significantly higher than those in rural areas. In this study, a significantly nested mycorrhizal association network was observed in rural areas (NODF = 64.68), whereas a non-nested pattern was observed in urban areas (NODF = 55.50). The competition index C-score (0.0769) of AM fungi in urban areas was slightly lower than that in rural areas (0.1431), and the species specialization (d') of 8 host plants and fungal dissimilarity among 8 host plants in urban areas were significantly lower than those in rural areas. Convergent associations among hosts may be an important factor influencing this non-nested pattern of the plant-AM fungi network in urban areas. Generalists, rather than specialists, were enhanced during the establishment of mycorrhizal associations in urban areas. Our results suggest that reduced selectivity of host plants, and generalist promotion and specialist reduction of AM fungi during urbanization may contribute to the non-nested network of plant-AM fungal associations.

Cd heavy metal and plants, rather than soil nutrient conditions, affect soil arbuscular mycorrhizal fungal diversity in green spaces during urbanization.

Urbanization accelerates pollution and habitat fragmentation, and the mechanism that shapes the arbuscular mycorrhizal (AM) fungal community in urban ecosystem still remains poorly understood. In this study, soil samples from 23 sites (from rural to urban), belonging to 4 green space types (country park, Co; urban park, Pa; roadside green space1, RoP1; and roadside green space2, RoP2), were collected to assess the effects of the urbanization on the AM fungal diversity. Using 454 pyrosequencing, a total of 79 AM fungal OTUs were uncovered. We found that urbanization showed a neutral effect on Shannon diversity, Simpson diversity, Pielou diversity, and community composition of the AM fungi. Within urban areas, the composition of AM fungal community was significantly different between RoP1 and RoP2. The db-RDA analysis of RoP1 and RoP2 revealed that the soil Cd accounted for the largest community composition variation, with an explanation rate of 20.5%, followed by the SOC (15.1%). Across 23 sites, Cd may have an obvious ecological toxicity on AM fungi, with significantly negative correlations between the soil Cd content and the AM fungal species richness and evenness. The AM fungal community also indicated significantly Mantel correlation with the soil Cd contents. Additionally, high herbaceous richness promoted rich AM fungi. The herbaceous composition, not the richness, has a significant impact on the AM fungal community composition. This study suggests that the toxicity of Cd from traffic should receive more attention during urban green space construction and management, and reasonable plant configuration contributed to the maintenance of the AM fungal community.

Reveal a hidden highly toxic substance in biochar to support its effective elimination strategy.

With the aim to develop optimized biochar with minimal contaminants, it is important significance to broaden the understanding of biochar. Here, we disclose for the first time, a highly toxic substance (metal cyanide, MCN, such as KCN or NaCN) in biochar. The cyanide ion (CN-) content in biochar can be up to 85,870 mg/kg, which is determined by the inherent metal content and type in the biomass with K and Na increasing and Ca, Mg and Fe decreasing its formation. Density functional theory (DFT) analysis shows that unstable alkali oxygen-containing metal salts such as K2CO3 can induce an N rearrangement reaction to produce for example, KOCN. The strong reducing character of the carbon matrix further converts KOCN to KCN, thus resulting biochar with high risk. However, the stable Mg, Ca and Fe salts in biomass cannot induce an N rearrangement reaction due to their high binding energies. We therefore propose that high valent metal chloride salts such as FeCl3 and MgCl2 could be used to inhibit the production of cyanide via metal interactive reaction. These findings open a new point of view on the potential risk of biochar and provide a mitigation solution for biochar's sustainable application.