RESUMEN
Phase modulators based upon the thermo-optic effect are used widely in silicon photonics for low speed applications such as switching and tuning. The dissipation of the heat produced to drive the device to the surrounding silicon is a concern as it can dictate how compact and tightly packed components can be without concerns over thermal crosstalk. In this paper we study through modelling and experiment, on various silicon on insulator photonic platforms, how close waveguides can be placed together without significant thermal crosstalk from adjacent devices.
RESUMEN
Silicon accumulation type modulators offer prospects of high power efficiency, large bandwidth and high voltage phase linearity making them promising candidates for a number of advanced electro-optic applications. A significant challenge in the realisation of such a modulator is the fabrication of the passive waveguide structure which requires a thin dielectric layer to be positioned within the waveguide, i.e. slotted waveguides. Simultaneously, the fabricated slotted waveguide should be integrated with conventional rib waveguides with negligible optical transition losses. Here, successful integration of polysilicon and silicon slot waveguides enabling a low propagation loss 0.4-1.2â dB/mm together with an ultra-small optical mode conversion loss 0.04â dB between rib and slot waveguides is demonstrated. These fabricated slot waveguide with dielectric thermal SiO2 layer thicknesses around 6â nm, 8â nm and 10â nm have been characterized under transmission electron microscopy allowing for strong carrier accumulation effects for MOS-capacitor electro-optic modulators.
RESUMEN
The authors report on nonconservative coupling in a passive silicon microring between its clockwise and counterclockwise resonance modes. The coupling coefficient is adjustable using a thermo-optic phase shifter. The resulting resonance of the supermodes due to nonconservative coupling is predicted in theory and demonstrated in experiments. This Letter paves the way for fundamental studies of on-chip lasers and quantum photonics, and their potential applications.
RESUMEN
In this paper, we report the generation of an ultra-sharp asymmetric resonance spectrum through Fano-like interference. This generation is accomplished by weakly coupling a high-quality factor (Q factor) Fabry-Pérot (FP) cavity and a low-Q factor FP cavity through evanescent waves. The high-Q FP cavity is formed by Sagnac loop mirrors, whilst the low-Q one is built by partially transmitting Sagnac loop reflectors. The working principle has been analytically established and numerically modelled by using temporal coupled-mode-theory (CMT), and verified using a prototype device fabricated on the 340 nm silicon-on-insulator (SOI) platform, patterned by deep ultraviolet (DUV) lithography. Pronounced asymmetric resonances with slopes up to 0.77 dB/pm have been successfully measured, which, to the best of our knowledge, is higher than the results reported in state-of-the-art devices in on-chip integrated Si photonic studies. The established theoretical analysis method can provide excellent design guidelines for devices with Fano-like resonances. The design principle can be applied to ultra-sensitive sensing, ultra-high extinction ratio switching, and more applications.
RESUMEN
Experimental demonstrations of silicon-on-insulator waveguide-based free-carrier effect modulators operating at 3.8 µm are presented. PIN diodes are used to inject carriers into the waveguides, and are configured to (a) use free-carrier electroabsorption to create a variable optical attenuator with 34 dB modulation depth and (b) use free-carrier electrorefraction with the PIN diodes acting as phase shifters in a Mach-Zehnder interferometer, achieving a VπLπ of 0.052 V·mm and a DC modulation depth of 22 dB. Modulation is demonstrated at data rates up to 125 Mbit/s.
RESUMEN
In this Letter, we report suspended silicon waveguides operating at a wavelength of 7.67 µm with a propagation loss of 3.1±0.3 dB/cm. To our knowledge, this is the first demonstration of low-loss silicon waveguides at such a long wavelength, with loss comparable to other platforms that use more exotic materials. The suspended Si waveguide core is supported by a sub-wavelength grating that provides lateral optical confinement while also allowing access to the buried oxide layer so that it can be wet etched using hydrofluoric acid. We also demonstrate low-loss waveguide bends and s-bends.