RESUMEN
In this work, we developed a visible-light-driven method for the selective synthesis of amides and N-acylureas from carboxylic acids and thioureas. This protocol was featured as avoidance of additional oxidants and transition metal catalysts, simple manipulations, low cost, broad substrate scope, and good functional group tolerance. As only oxygen serves as the oxidation reagent, this method provides a promising synthesis candidate for the formation of N-aryl amides and N-acylureas, including late-stage functionalization of complex pharmaceutical molecules and biologically active molecules.
RESUMEN
Both ternary copolymerization and ternary blending are effective methods to fine-tune polymer structure and manipulate thin-film morphology to improve device performance. In this work, three D-A-A-A (D: donor, A: acceptor) terpolymer donors (FY1, FY2, and FY3) are synthesized by introducing BDD (1,3-bis(2-ethylhexyl)-5,7-di(thiophen-2-yl)benzo[1,2-c:4,5-c']dithiophene-4,8-dione) units into the D-A alternating copolymer PM6 backbone. Owing to the promoted conjugated planarity and excellent absorption of BDD, the obtained terpolymers display an extended absorption range and enhanced π-π stacking orientation, which is a promising third component in ternary device. As a result, the optimal FY1:PM6:BTP-eC9-based ternary device afforded an impressive power conversion efficiency (PCE) as high as 18.52%, owing to the efficient charge transport, negligible energy loss, and suitable domain size. The result provides an efficient method to obtain high-performance polymer solar cells by using analogous polymer donors in ternary device.
RESUMEN
Nanocellulose aerogel has the advantages of porosity, low density and high specific surface area, which can effectively realize the adsorption and treatment of wastewater waste gas. The methods of preparing nanocellulose mainly include mechanical, chemical and biological methods. Nanocellulose is formed into nanocellulose aerogel after gelation, solvent replacement and drying processes. Based on the advantages of easy modification of nanocellulose aerogels, nanocellulose aerogels can be functionalized with conductive fillers, reinforcing fillers and other materials to give nanocellulose aerogels in electrical, mechanical and other properties. Through functionalization, the properties of nanocellulose composite aerogel such as hydrophobicity and adsorption are improved, and the aerogel is endowed with the ability of electrical conductivity and electromagnetic shielding. Through functionalization, the applicability and general applicability of nanocellulose composite aerogel in the field of environmental protection are improved. In this paper, the preparation and functional modification methods of nanocellulose aerogels are reviewed, and the application prospects of nanocellulose composite aerogels in common environmental protection fields such as dye adsorption, heavy metal ion adsorption, gas adsorption, electromagnetic shielding, and oil-water separation are specifically reviewed, and new solutions are proposed.
Asunto(s)
Celulosa , Conservación de los Recursos Naturales , Celulosa/química , Metales , Porosidad , SolventesRESUMEN
N, O Co-Doped porous carbon materials are promising electrode materials for supercapacitors. However, it is still a challenge to prepare high capacitance performance N, O Co-Doped porous carbon materials with balanced pore structure. In this work, a simple chemical blowing method was developed to produce hierarchal porous carbon materials with Zn(NO3)2·6H2O and Fe(NO3)3·9H2O as the foaming agents and precursors of dual templates. Soybean protein isolate served as a self-doping carbon source. The amount of Fe(NO3)3·9H2O influenced the microstructure, element content and capacitance performance of the obtained porous carbon materials. The optimized sample CZnFe-5 with the addition of 5% Fe(NO3)3·9H2O displayed the best capacitance performance. The specific capacitance reached 271 F g-1 at 0.2 A g-1 and retained 133 F g-1 at 100 A g-1. The CZnFe-5//CZnFe-5 symmetric supercapacitors delivered a maximum energy density of 16.83 Wh kg-1 and good stability with capacitance retention of 86.33% after 40,000 cycles tests at 50 A g-1. The symmetric supercapacitors exhibited potential applications in lighting LED bulbs with a voltage of 3 V. This work provides a new strategy for the synthesis of hierarchical porous carbon materials for supercapacitors from low-cost biomass products.
RESUMEN
A fluorescent and colorimetric poly (acrylamide)-based copolymer probe P(AAm-co-RBNCH) has been designed via free radical polymerization of a commercial acrylamide monomer with a rhodamine-functionalized monomer RBNCH. Metal ion selectivity of RBNCH was investigated by fluorescence and colorimetric spectrophotometry. Upon addition of Fe3+, a visual color change from colorless to red and a large fluorescence enhancement were observed for the ring-opening of the rhodamine spirolactam mechanism. The monomer gives a sensitive method for quantitatively detecting Fe3+ in the linear range of 100-200 µM, with a limit of detection as low as 27 nM and exhibiting high selectivity for Fe3+ over 12 other metal ions. The hydrogel sensor was characterized by FTIR, and the effects of RBNCH amount on gel content and swelling properties were explored. According to the recipe of 1.0 mol% RBNCH to the total monomers, the fabricated hydrogel sensor displayed a good swelling property and reversibility performance and has potential for application in the imaging of Fe3+ level in industrial wastewater.
RESUMEN
The simple design of a high-energy-density device with high-mass-loading electrode has attracted much attention but is challenging. Manganese oxide (MnO2 ) with its low cost and excellent electrochemical performance shows high potential for practical application in this regard. Hence, the high-mass-loading of the MnO2 electrode with wood-derived carbon (WC) as the current collector is reported through a convenient hydrothermal reaction for high-energy-density devices. Benefiting from the high-mass-loading of the MnO2 electrode (WC@MnO2 -20, ≈14.1 mg cm-2 ) and abundant active sites on the surface of the WC hierarchically porous structure, the WC@MnO2 -20 electrode shows remarkable high-rate performance of areal/specific capacitance ≈1.56 F cm-2 /45 F g-1 , compared to the WC electrode even at the high density of 20 mA cm-2 . Furthermore, the obtained symmetric supercapacitor exhibits high areal/specific capacitances of 3.62 F cm-2 and 87 F g-1 at 1.0 mA cm-2 and high energy densities of 0.502 mWh cm-2 /12.2 Wh kg-1 with capacitance retention of 75.2% after 10 000 long-term cycles at 20 mA cm-2 . This result sheds light on a feasible design strategy for high-energy-density supercapacitors with the appropriate mass loading of active materials and low-tortuosity structural design while also encouraging further investigation into electrochemical storage.
RESUMEN
Fluorescence probe combines with fluorescence imaging technology has become the most powerful analytical method with their great advantages of high sensitivity and selectivity and real-time monitoring. Ni2+ is widely distributed in food, environment and living animals, thereof, it is of great significance for detection Ni2+ with high selectivity. Herein, a simple strategy is proposed to design and synthesiz a small molecule fluorescent probe Y1 by using "one-pot" method. The spectroscopic behaviors including UV-Vis absorption and fluorescence emission spectrum have been used to verify the feasibility of probe towards Ni2+ in water/EtOH (v/v = 2:8) mixtures under neutral condition. As expected, Y1 offers high selectivity and sensitivity for detection Ni2+ in aqueous solution with a good linear relationship and low detection limit within Ni2+ concentration variation from 0 to 13 µM (DOL = 0.0038 µM, R2 = 0.9983). It is remarkable that Y1 can be applied for real-time visualization Ni2+ change in sprouted potato and zebrafish with great photo-stability, highlighting that the practicability and feasibility of Y1 to detect and monitor Ni2+ in the field of food industry and biomedical field.
Asunto(s)
Colorimetría , Colorantes Fluorescentes/química , Níquel/análisis , Solanum tuberosum/química , Animales , Espectrometría de Fluorescencia , Espectrofotometría Ultravioleta , Rayos Ultravioleta , Pez CebraRESUMEN
A highly general and selective Co-catalyzed biaryl coupling through C-F cleavage under phosphine or NHC-free conditions was described. A broad range of aryl fluorides including unactivated fluorides as well as those with sensitive functionalities could couple with various Ti(OEt)4-mediated aryl Grignard reagents with high selectivity under the catalysis of CoCl2/DMPU. Importantly, selective C-F bond activation couplings between two types of fluorines (difluorinated aromatics and on two different coupling partners) and in the presence of C-Cl or C-Br bonds could also be achieved.
RESUMEN
A room temperature phosphine or NHC ligand-free cobalt-catalyzed arylation of (hetero)aromatic acids has been developed. It involves an oxidative cross-coupling between carboxylate and aryl titanate reagents using oxygen as an oxidant, and the arylation at the position ortho, meta and para to the carboxylic acid group could all be achieved. As application, various (hetero)aromatic acids including xenalipin, tafamidis and the key intermediate for a cardioprotective compound have been efficiently synthesized.
RESUMEN
The first cobalt-catalyzed oxidative cross-coupling reaction of two aryl metal reagents is described. An equivalent amount of two aryl Grignard or lithium reagents, after mediation by an equivalent amount of simple ClTi(OEt)3, was facilely assembled under the catalysis of 1 mol % of CoCl2/10 mol % of DMPU using oxygen. The cross-couplings between various aryl metal reagents, especially between two structurally similar aryl Grignard reagents, proceeded smoothly and selectively and, thus, provided a highly general and efficient method for the construction of biaryl compounds.
RESUMEN
Nanocellulose, as a nanoscale polymer material, has garnered significant attention worldwide due to its numerous advantages including excellent biocompatibility, thermal stability, non-toxicity, large specific surface area, and good hydrophilicity. Various methods can be employed for the preparation of nanocellulose. Traditional approaches such as mechanical, chemical, and biological methods possess their own distinct characteristics and limitations. However, with the growing deterioration of our living environment, several green and environmentally friendly preparation techniques have emerged. These novel approaches adopt eco-friendly technologies or employ green reagents to achieve environmental sustainability. Simultaneously, there is a current research focus on optimizing traditional nanocellulose preparation methods while addressing their inherent drawbacks. The combination of mechanical and chemical methods compensates for the limitations associated with using either method alone. Nanocellulose is widely used in wound dressings owing to its exceptional properties, which can accelerate the wound healing process and reduce patient discomfort. In this paper, the principle, advantages and disadvantages of each preparation method of nanocellulose and the research findings in recent years are introduced Moreover, this review provides an overview of the utilization of nanocellulose in wound dressing applications. Finally, the prospective trends in its development alongside corresponding preparation techniques are discussed.
Asunto(s)
Celulosa , Polímeros , Humanos , Celulosa/química , Estudios Prospectivos , Vendajes , Cicatrización de HeridasRESUMEN
With the rapid development of the Internet of Things, nanogenerator as a green energy collection technology has attracted great attention in various fields. Specifically, the natural renewable nanocellulose as a raw material can significantly improve the environmental friendliness of the nanocellulose-based nanogenerators, which also makes the nanocellulose based nanogenerators expected to further develop in areas such as wearable devices and sensor networks. This paper mainly reports the application of nanocellulose in nanogenerator, focusing on the sensor. The types, sources and preparation methods of nanocellulose are briefly introduced. At the same time, the special structure of nanocellulose highlights the advantages of nanocellulose in nanogenerators. Then, the application of nanocellulose-based nanogenerators in sensors is introduced. Finally, the future development prospects and shortcomings of this nanogenerator are discussed.
Asunto(s)
Internet , Dispositivos Electrónicos Vestibles , TecnologíaRESUMEN
An iron-catalyzed selective N=S coupling of N-methoxy amides and sulfoxides has been developed and was found to be a highly efficient method for the synthesis of N-acyl sulfoximines. Electron-donating as well as electron-withdrawing groups on the phenyl ring are tolerated, and even sensitive substituents are compatible. The current catalytic transformation was conducted under an air atmosphere and can be easily scaled up to a gram scale with a catalyst loading of only 1 mol %. In this case, both coupling partners are used in their native forms, thus obviating prior functionalization and activation.
RESUMEN
Exploration of greatly efficient and steady non-noble oxygen evolution reaction (OER) electrocatalysts is of great significance in improving the overall efficiency of energy density systems such as regenerative fuel cells, water electrolyzes, and metal-air batteries. Herein, inspired by hierarchical 3D porous structures with open microchannels of natural wood, CoO@NiFe LDH sandwich-like nanosheets were anchored on the carbonized wood (CW) via electrodeposition and calcination strategies. The strong interactions between CoO nanosheets and NiFe LDH nanosheets endow CoO@NiFe LDH/CW electrocatalyst with high catalytic properties toward the OER comparable to CoO/CW and NiFe LDH/CW. The optimized CoO@NiFe LDH/CW electrocatalyst demonstrates good OER catalytic performance with an overpotential of 230â mV at 100â mA cm-2. This work presents an innovative approach to utilize renewable resources for constructing advanced free-standing catalysts.
RESUMEN
While titanacyclopropanes are used to react mainly with ester, amide, and cyano to undergo cyclopropanation, herein they react preferentially with pyridine N-oxide to accomplish C2-H alkylation beyond these functionalities with double regioselectivity. After being pyridylated at the less hindered C-Ti bond, the remaining C-Ti bond of titanacyclopropanes can be further functionalized by various electrophiles, allowing facile introduction of complex alkyls onto the C2 of pyridines. Its synthetic potential has been demonstrated by late-stage diversification of drugs.
RESUMEN
In the context of the gradual depletion of global fossil fuel resources, it is increasingly necessary to explore new alternative energy. Hydrogen energy has attracted great interest from researchers because of its green and pollution-free characteristics. Moreover, the methanol oxidation reaction (MOR) can combine the hydrogen evolution reaction (HER), replacing the anode reaction (oxygen evolution reaction-OER) in overall water splitting and efficiently producing hydrogen. In this study, platinum-palladium nanoparticles on reduced graphene oxide (PtPd/rGO) were successfully synthesized as HER and MOR bifunctional electrocatalysts under alkaline conditions by the stepwise loading of Pt and Pd bimetallic nanoparticles on rGO using a simple liquid-phase reduction method. PtPd/rGO-2 with 0.99 wt% Pt and 2.86 wt% Pd in the HER has the lowest overpotential (87.16 mV at 100 mA cm-2), with the smallest Tafel slope (18.9 mV dec-1). The exceptional mass activity of PtPd/rGO-2 in the MOR reaches 10.75 A mg-1PtPd, which is 18.22 and 53.75 times greater than that of commercial Pt/C (Pt/C) and commercial Pd/C (Pd/C), respectively. PtPd/rGO-2 is 0.935 V lower in the coupling reaction of HER and MOR (MOR ⥠HER) compared to the overall water splitting (OER ⥠HER) without methanol (10 mA cm-2). This is probably because appropriate Pt and Pd loading exposes many more catalytic sites, and the synergistic interaction between Pt, Pd, and Pt-Pd enhances the catalytic performance. This strategy can be used for the synthesis of novel bifunctional electrocatalysts.
RESUMEN
BACKGROUND: Primary liver cancer has significant intratumor genetic heterogeneity (IGH), which drives cancer evolution and prevents effective cancer treatment. CRISPR/Cas9-induced mouse liver cancer models can be used to elucidate how IGH is developed. However, as CRISPR/Cas9 could induce chromothripsis and extrachromosomal DNA in cells in addition to targeted mutations, we wondered whether this effect contributes to the development of IGH in CRISPR/Cas9-induced mouse liver cancer. METHODS: CRISPR/Cas9-based targeted somatic multiplex-mutagenesis was used to target 34 tumor suppressor genes (TSGs) for induction of primary liver tumors in mice. Target site mutations in tumor cells were analyzed and compared between single-cell clones and their subclones, between different time points of cell proliferation, and between parental clones and single-cell clones derived from mouse subcutaneous allografts. Genomic instability and generation of extrachromosomal circular DNA (eccDNA) was explored as a potential mechanism underlying the oscillation of target site mutations in these liver tumor cells. RESULTS: After efficiently inducing autochthonous liver tumors in mice within 30-60 days, analyses of CRISPR/Cas9-induced tumors and single-cell clones derived from tumor nodules revealed multiplexed and heterogeneous mutations at target sites. Many target sites frequently displayed more than two types of allelic variations with varying frequencies in single-cell clones, indicating increased copy number of these target sites. The types and frequencies of targeted TSG mutations continued to change at some target sites between single-cell clones and their subclones. Even the proliferation of a subclone in cell culture and in mouse subcutaneous graft altered the types and frequencies of targeted TSG mutations in the absence of continuing CRISPR/Cas9 genome editing, indicating a new source outside primary chromosomes for the development of IGH in these liver tumors. Karyotyping of tumor cells revealed genomic instability in these cells manifested by high levels of micronuclei and chromosomal aberrations including chromosomal fragments and chromosomal breaks. Sequencing analysis further demonstrated the generation of eccDNA harboring targeted TSG mutations in these tumor cells. CONCLUSIONS: Small eccDNAs carrying TSG mutations may serve as an important source supporting intratumor heterogeneity and tumor evolution in mouse liver cancer induced by multiplexed CRISPR/Cas9.
Asunto(s)
Sistemas CRISPR-Cas , Neoplasias Hepáticas , Ratones , Animales , Neoplasias Hepáticas/genética , Edición Génica , Mutación , Genes Supresores de Tumor , ADN , Inestabilidad Genómica , ADN CircularRESUMEN
Food packaging nowadays is not only essential to preserve food from being contaminated and damaged, but also to comply with science develop and technology advances. New functional packaging materials with degradable features will become a hot spot in the future. By far, plastic is the most common packaging material, but plastic waste has caused immeasurable damage to the environment. Cellulose known as a kind of material with large output, wide range sources, and biodegradable features has gotten more and more attention. Cellulose-based materials possess better degradability compared with traditional packaging materials. With such advantages above, cellulose was gradually introduced into packaging field. It is vital to make packaging materials achieve protection, storage, transportation, market, and other functions in the circulation process. In addition, it satisfied the practical value such as convenient sale and environmental protection, reduced cost and maximized sales profit. This review introduces the cellulose resource and its application in composite packaging materials, antibacterial active packaging materials, and intelligent packaging materials. Subsequently, sustainable packaging and its improvement for packaging applications were introduced. Finally, the future challenges and possible solution were provided for future development of cellulose-based composite packaging materials.
RESUMEN
Multichannel-porous carbon derived from wood can serve as a conductive substrate for fast charge transfer and ion diffusion, supporting the high-theory capacitance of pseudocapacitive materials. Herein, NiCo2O4 nanosheets, which are hierarchically porous, anchored on the surface of carbonized wood via electrodeposition for free-binder high-performance supercapacitor electrode materials, were proposed. Benefiting from the effectively alleviated NiCo2O4 nanosheets accumulation and sufficient active surface area for redox reaction, a N-doped wood-derived porous carbon-NiCo2O4 nanosheet hybrid material (NCNS-NCW) electrode exhibited a specific electric capacity of 1730 F g-1 at 1 A g-1 in 1 mol L-1 KOH and splendid electrochemical firmness with 80% capacitance retention after cycles. Furthermore, an all-wood-based asymmetric supercapacitor based on NCNS-NCW//NCW was assembled and a high energy density of 56.1 Wh kg-1 at a watt density of 349 W kg-1 was achieved. Due to the great electrochemical performance of NCNS-NCW, we expect it to be used as an electrode material with great promise for energy storage equipment.
RESUMEN
Herein, we report a highly selective fluorescent probe for the detection of Cu(ii). The detection mechanism relies on the Cu(ii)-catalyzed oxidative hydroxylation of 2-(aminocarbonyl)phenylboronic acid into salicylamide, thus recovering the excited-state intramolecular proton transfer (ESIPT) effect and inducing more than 35-fold fluorescence enhancement. The simple structure and readily available fluorescent probe give a novel method for quantitatively detecting Cu(ii) in the linear range of 0-22 µM, with a limit of detection down to 68 nM, and exhibiting high selectivity for Cu(ii) over 16 other metal ions.