Safety and efficacy of ultrasonography of tension after zone II flexor tendon repair: A randomized controlled trial.

BACKGROUND: Primary flexor tendon repairs of lacerations in zone II of the hand are fraught with problems. Traditionally, exercise (active and passive), orthoses, and physical agents are common interventions for the rehabilitation of patients experiencing these issues. One area of focus in this field is how to safely utilize tension to lengthen gliding distance following zone II injury. Finding effective solutions in this area is a key priority for improving patient outcomes and quality of life. PURPOSE: To identify the optimal immobilization position that meets safety standards for tension and is the most efficient, and consequently, to validate our clinical effectiveness. STUDY DESIGN: A cross-sectional study was adopted for the first part of the research (Research 1). A prospective, parallel, 2-group, randomized trial was conducted with concealed allocation and single blinding in the second part of the research (Research 2). METHODS: A total of 60 healthy adults were recruited to select the best-fit protective immobilization position in Research 1, which was confirmed by tendon tension (via Young's modulus) and excursion (via gliding distance). We then randomly assigned 45 patients after zone II flexor tendon repair into two groups in Research 2 to compare functional outcomes. The control group underwent the conventional modified Duran protocol with early passive motion, while the experimental group received the protocol (optimized by Research 1) with early active motion. Ultrasonography was used to measure the tension and excursion of the flexor tendons. The outcomes measured at 16 weeks post-repair included total active motion, strength, the Disabilities of the Arm, Shoulder and Hand, and Strickland scores. RESULTS: Three participants were unable to participate in Research 2 due to medical issues and poor attendance. The investigation found that the safe tendon threshold was 345.09 ± 87.74 kPa for partial active digital motion among the 60 participants. The optimal immobilization position requires the wrist to be neutral with a flexion angle of 30° at the metacarpophalangeal joint. The grip strengths (p = 0.012), ratio of grip strength (p = 0.015), the Disabilities of the Arm, Shoulder and Hand (p = 0.036), and total active motion (p = 0.023) differed significantly between the two groups. CONCLUSIONS: Protective immobilization of the wrist in a neutral flexion position and with the metacarpophalangeal joint flexed at 30° can secure the repaired flexor tendon safely and efficiently. The effects of an early active motion protocol may improve the grip strength and upper limb mobility of individuals after zone II flexor tendon repair. CLINICAL TRIAL REGISTRATION: ChiCTR2000030592.

[Current research status and application prospect of numerical simulation in traditional Chinese medicine drying].

With the rapid development of computer technology, numerical simulation has gradually become an important method to study drying process and improve drying equipment. Using computer to simulate the drying process of traditional Chinese medicine(TCM) is characterized by intuitiveness, scientificity, and low cost, which serves as an auxiliary means for technical innovation in TCM drying. This paper summarizes the theories of different drying methods and the research status of numerical simulation in drying, introduces the modeling methods and software of numerical simulation, and expounds the significance of numerical simulation modeling in shortening the research and development cycle, improving drying equipment, and optimizing drying parameters. However, the current numerical simulation method for drying process has problems, such as low accuracy, lack of quantitative indicators for the control of simulation results on the process, and insufficient in-depth research on the mechanism of drug quality changes. Furthermore, this paper put forward the application prospect of numerical simulation in TCM drying, providing reference for the further study of numerical simulation in this field.

[Current status, trends, and challenges of continuous manufacturing technology for oral traditional Chinese medicine solid preparations].

In recent years, continuous manufacturing technology has attracted considerable attention in the pharmaceutical industry. This technology is highly sought after for its significant advantages in cost reduction, increased efficiency, and improved productivity, making it a growing trend in the future of the pharmaceutical industry. Compared to traditional batch production methods, continuous manufacturing technology features real-time control and environmentally friendly intelligence, enabling pharmaceutical companies to produce drugs more efficiently. However, the adoption of continuous manufacturing technology has been slow in the field of traditional Chinese medicine(TCM) pharmaceuticals. On the one hand, there is insufficient research on continuous manufacturing equipment and technology that align with the characteristics of TCM preparations. On the other hand, the scarcity of talent with diverse expertise hampers its development. Therefore, in order to promote the modernization and upgrading of the TCM pharmaceutical industry, this article combined the current development status of the TCM industry to outline the development status and regulatory requirements of continuous manufacturing technology. At the same time, it analyzed the problems with existing TCM manufacturing models and explored the prospects and challenges of applying continuous manufacturing technology in the field of TCM pharmaceuticals. The analysis focused on continuous manufacturing control strategies, technical tools, and pharmaceutical equipment, aiming to provide targeted recommendations to drive the development of the TCM pharmaceutical industry.

[Quality control mode based on engineering quality view of Chinese medicine pharmacy].

Due to the characteristics of confusing varieties of Chinese medicinal materials, different sources, complex chemical composition, non-standard preparation process, and non-standard pharmaceutical equipment, the quality of Chinese medicinal preparations is difficult to be controlled and evaluated effectively under the current quality control mode and method of Chinese medicinal preparation. The present study proposed an engineering quality view of Chinese medicine pharmacy and a strategy to control the quality of Chinese medicinal preparations based on the current situation. The "overall, dialectical, and dynamic" multi-factor engineering quality view, covering original medicinal materials, preparation technologies, pharmaceutical equipment, and Chinese medicinal preparations, ensures the traceable process, measurable procedures, and feedback quality. The quality control mode of Chinese medicinal preparation with controllable sources, standardized preparation technologies, green pharmaceutical equipment, and intelligent manufacturing is built up.

The prevalence of HIV among MSM in China: a large-scale systematic analysis.

BACKGROUND: The prevalence of HIV among men who have sex with men (MSM) has become a significant public health challenge. The aim was to comprehensively estimate the national prevalence of HIV among MSM and its time trends through a large-scale systematic analysis. METHODS: Systematic search of Cochrane Library, PubMed, EMBASE, CNKI, VIP, and Wanfang Data databases without language restriction for studies on the prevalence of HIV among MSM published before Dec.31, 2018. Studies were eligible for inclusion if they were published in the peer-reviewed literature and used validated assessment methods to assess the prevalence of HIV among MSM. Estimates were pooled using random-effects analysis. RESULTS: Data were extracted from 355 cross-sectional studies (571,328 individuals) covered 59 cities from 30 provinces and municipalities of China. The overall national prevalence of HIV among MSM from 2001 to 2018 was estimated to be 5.7% (95% CI: 5.4-6.1%), with high between-study heterogeneity (I2 = 98.0%, P <  0.001). Our study showed an increased tendency in the HIV prevalence as time progressed by meta-regression analysis (I2 = 95.9%, P <  0.0001). HIV prevalence was the highest in those aged 50 years and older with HIV prevalence of 19.3% (95%CI: 13.1-27.4%, N = 13). HIV was more prevalent in the illiterate population (16.8%), than in those who had received an education. Although the internet was a major venue for Chinese MSM seeking male sex partners (35.6, 95%CI: 32.3-39.9%, N = 101), seeking MSM in bathhouses/saunas had the highest associated prevalence of HIV (13.4, 95%CI: 10.3-17.1%, N = 22). The HIV prevalence among MSM varied by location: compared with other regions in China, HIV was highly prevalent among MSM in the southwest (10.7, 95%CI: 9.3-12.2%, N = 91). Compared to participants who sometimes or always used condoms, participants who had never used a condom in the past 6 months had a higher risk of HIV infection, with odds ratios of 0.1 (95%CI: 0.08-0.14). CONCLUSIONS: Our analysis provided reliable estimates of China's HIV burden among MSM, which appears to present an increasing national public health challenge. Effective government responses are needed to address this challenge and include the implementation of HIV prevention.

[Application prospect of new technology and new equipment in production of Chinese patent medicine].

At present,the production equipment and process of Chinese patent medicines still have many problems including high energy consumption,low efficiency,high pollution,and low intelligence,which seriously hinder the transformation,upgrading and modernized development of traditional Chinese medicine industry. With the emergence of various new pharmaceutical technologies and the application of technologies of other fields in traditional Chinese medicine industry,the development of Chinese patent medicine has ushered in new opportunities. The processes such as pulverization,mixing,extraction,separation,concentration,drying and sterilization are unique for the production of Chinese patent medicine. These main features can be distinguished from the manufacturing process of chemical drugs,determining the characteristics of the production process and equipment of Chinese patent medicine. In this paper,each operation unit was mentioned to summarize and analyze the new equipment and new technologies with advantages and characteristics in recent years from the perspectives of definition,principle,classification and application. Among them,the automatic spray device of the mixer,the extraction and separation equipment of volatile oil,and the crane basket-type circulation extraction technology,composite multi-layer spiral vibration countercurrent drying,and vibration sterilization equipment all have rapid development in recent years,with great prospects in the production of Chinese patent medicines. In this paper,we also analyzed some problems existing in the production equipment and technology of Chinese patent medicine and the key factors restricting the development of Chinese patent medicine,discussed the transformation of Chinese patent medicine production from traditional to modern and from semi-automatic to intelligent,and put forward three suggestions to help Chinese patent medicine achieve the goal of improving quality,efficiency and green manufacturing in production.

[Discussion on research thought of dry granulation of traditional Chinese medicine: research progress at home and abroad based on dry granulation technology].

Dry granulation technology is a great innovation in granulation technology,which saves many intermediate links and reduces many intermediate costs. It is closely related to the characteristics of materials,dry granulation equipment and process. Dry granulation technology is a systematic engineering science covering many technical fields. The process of dry granulation involves complex mathematical model mechanisms of temperature field,pressure field and velocity field,closely related to the characteristics of materials and drying equipment. However,due to the late start of research on dry granulation technology of traditional Chinese medicine,basic research is still weak. The research on dry granulation technology has achieved great results in the fields of food,chemical industry,agriculture and forestry,showing great reference significance. The advantage of dry granulation of traditional Chinese medicine is that it can be directly granulated by adding an appropriate amount of auxiliary materials in the extract powder of traditional Chinese medicine,without the need of wetting,mixing,drying and other processes. The process is simple and can effectively guarantee the quality of traditional Chinese medicine. The granules obtained by the dry granulation technique are important intermediates for preparing the solid preparations of traditional Chinese medicines,which would directly affect the subsequent molding process and the quality of the preparation products. Therefore,based on the characteristics of dry granulation method in traditional Chinese medicine and by referring to the advanced research results of dry granulation technology in other fields,we would discuss the research ideas of dry granulation in traditional Chinese medicine in terms of the mechanism of dry granulation equipment,technology,on-line detection technology and mathematical model of dry granulation process,hoping to provide reference for the research of dry granulation method in traditional Chinese medicine.

Assessment of pulmonary fibrosis induced by paraquat using Al18F-NODA-FAPI-04 PET/CT.

The lack of a highly sensitive method to evaluate paraquat (PQ)-induced pulmonary fibrosis and predict disease progression remains an unresolved clinic issue. Fibroblast activation protein (FAP) may play an important role in the pathogenesis of PQ-induced pulmonary fibrosis. We aimed to evaluate the role of FAP in the PQ-induced pulmonary fibrosis and the utility of fibroblast activation protein inhibitor (FAPI) for positron emission tomography (PET) imaging in PQ-induced pulmonary fibrosis. In our study, two cases of PQ poisoning were presented and FAPI PET/CT was performed as a novel imaging technique. The uptake of FAPI increased in both cases of PQ poisoning. Animal experiments were then performed to validate the findings in the patients. Physiological FAPI lung uptake was higher in mice of the PQ group than in the control group. The results of histological analysis and Western blot were consistent with the findings of PET/CT imaging. The pulmonary fibrosis animal model was developed by intragastric gavage of PQ. PET/CT imaging was performed after injection of FAPI. Lung tissues of mice were collected for fibrosis assessment after imaging. Immunohistochemistry for FAP, histology and Western blot for collagen were performed to further validate the imaging findings. In conclusion, FAPI was involved in the pathogenesis of fibrosis induced by PQ, and PET/CT with FAPI could detect lung fibrogenesis, making it a promising tool to assess early disease activity and predict disease progression.

Optimization of synthesis, characterization and cytotoxic activity of Seleno-Capparis spionosa L. polysaccharide.

In this study, an experiment was designed to optimize the synthesis of seleno-Capparis spionosa L. polysaccharide (Se-CSPS) by response surface methodology. Three independent variables (reaction time, reaction temperature and ratio of Na(2)SeO(3) to CSPS) were tested. Furthermore, the thermal stability, particle size, shape and cytotoxic activity of Se-CSPS in vitro were investigated. The optimum reaction conditions were obtained shown as follows: reaction time 7.5 h, reaction temperature 71 °C, and ratio of Na(2)SeO(3) to CSPS 0.9 g/g. Under these conditions, the Se content in Se-CSPS reached 5.547 mg/g, which was close to the predicted value (5.518 mg/g) by the model. The thermal stability, particle size and shape of Se-CSPS were significantly different from those of CSPS. Additionally, a MTT assay indicated that the Se-CSPS could inhibit the proliferation of human gastric cancer SGC-7901 cells in a dose-dependent manner.

Optimizing the extraction of anti-tumor polysaccharides from the fruit of Capparis spionosa L. by response surface methodology.

Capparis spionosa L. is a traditional medicinal plant in China and central Asia. In this study, an experiment was designed to investigate the optimization of the extraction of anti-tumor polysaccharides from the fruit of Capparis spionosa L. (CSPS) by response surface methodology (RSM). Four independent variables (extraction temperature, extraction time, ratio of water to sample and extraction cycles) were explored. Meanwhile, the in vivo anti-tumor activity of CSPS was investigated. The results showed that the experimental data could be fitted to a second-order polynomial equation using multiple regression analysis. The optimum extraction conditions were as follows: extraction temperature 92 °C, extraction time 140 min, ratio of water to sample 26 mL/g, and three extraction cycle. Under these conditions, the yield of polysaccharides reached 13.01%, which was comparable to the predicted yield (12.94%, p > 0.05). This indicated that the model was adequate for the extraction process. Additionally, CSPS could prolong the survival time of H22 bearing mice in vivo. The anti-tumor activities of CSPS were dose-dependent.

[Ursolic acid activates chloride channels and decreases cell volume in poorly differentiated nasopharyngeal carcinoma cells].

The present study aimed to investigate the effects of ursolic acid on the chloride channels and cell volume in nasopharyngeal carcinoma cells (CNE-2Z). The whole-cell patch clamp technique was used to detect the current, and cell imaging technique was applied to measure cell volume. The properties of the currents induced by ursolic acid were investigated by changing the extracellular osmotic pressure, replacing the extracellular anions and applying chloride channel blockers. The results showed that, under isotonic conditions, the background current was weak and stable. When perfusing the cells with ursolic acid (100 nmol/L), a large current (-59.86 pA/pF ± 4.86 pA/pF at -80 mV, 78.92 pA/pF ± 6.39 pA/pF at +80 mV) was induced. The chloride current showed outward rectification and negligible time- and voltage-dependent inactivation. The reversal potential (-4.83 mV ± 0.30 mV) of the current was close to the calculated equilibrium potential for Cl⁻ (-0.9 mV). The permeabilities of the channel to different anions were ranked in order as follows: Cl⁻ = I⁻ > Br⁻ > gluconate. Hypertonic solutions inhibited the current induced by ursolic acid. The chloride channel blockers, tamoxifen (20 µmol/L) and 5-nitro-2-(3-phenylpro-pylamino) benzoic acid (NPPB, 100 µmol/L), suppressed the current. Furthermore, ursolic acid decreased the cell volume by (11.78 ± 1.20)% in 1 h, and the effect was inhibited by NPPB. These results suggest that ursolic acid can activate chloride channels, resulting in outflow of Cl⁻ and decrease of cell volume in nasopharyngeal carcinoma cells.

A meta-analysis of the diagnostic value of microRNA for hypertensive left ventricular hypertrophy.

In this study, the diagnostic value of microRNAs (miRNAs) for hypertension (HTN) with left ventricular hypertrophy (LVH) were evaluated by meta-analysis. A correlation study of the diagnostic value of miRNAs in HTN with LVH was conducted using a computer search of the China Knowledge Network (CNKI), Wanfang, VIP, China Biomedical Literature Database (CBM), PubMed, Web of Science, and Embase. Studies from the time of database creation to May 2022 were evaluated. The quality assessment of diagnostic accuracy studies-2 (QUADAS-2) tool in RevMan 5.3 was used to evaluate the quality of the literature, and Meta-Disc 1.4 and Stata 16.0, were used to calculate the combined sensitivity (SEN), specificity (SPE), positive likelihood ratio (PLR), negative likelihood ratio (NLR), diagnostic advantage ratio (DOR), and their 95% confidence intervals. Subject working characteristic curves were plotted and the area under the curve (AUC) was calculated using Stata 16.0. Seven publications and 8 studies were included. miRNA diagnoses of HTN with LVH had SENcombined = 0.84, SPEcombined = 0.80, PLRcombined = 4.2, NLRcombined = 0.20, DORcombined = 21, and AUCcombined = 0.89. Subgroup analysis showed that the sensitivity of plasma miRNA for the diagnosis of HTN with LVH was 0.85, which was higher than that of serum which was 0.83. The specificity of serum miRNA for the diagnosis of HTN with LVH was 0.82, which was higher than that of plasma which was 0.78, and the diagnostic accuracy of miRNA in serum DOR was 23, which was higher than that of plasma DOR which was 20. In the diagnosis of HTN with LVH, miRNA has high sensitivity and specificity and is a better biological marker. Systematic review registration: http://www.crd.york.ac.uk/PROSPERO/, CRD42022346686.

Preclinical evaluation of [68Ga]Ga-MALAT-1-antisense oligonucleotides for specific PET imaging of MALAT-1 expressing tumours.

OBJECTIVE: The present study was to explore the feasibility of developing positron molecular probes for the metastasis-associated lung adenocarcinoma transcript 1 (MALAT-1), to evaluate the distribution and pharmacokinetics, and to explore whether the probe can be used for the imaging of malignant tumours with high MALAT-1 expression in vivo. METHODS: [68Ga]Ga labelling of MALAT-1 antisense oligonucleotides ([68Ga]Ga-MALAT-1-ASO) was synthesized by the conjugation of MALAT-1-NOTA-ASO and [68Ga] Ga3+. The radiochemical purity was shown by radio-HPLC. Pharmacokinetic studies and cellular uptake studies were performed. The biodistribution and metabolism of [68Ga] Ga-MALAT-1-ASO in normal ICR and MHCC-LM3 xenograft-bearing nude mice were studied in vitro and in vivo. RESULTS: [68Ga]Ga-MALAT-1-ASO was obtained in 98% radiochemical yield from a 10-min synthesis with 100 ± 50 MBq/nmol specific activity and >99% radiochemical purity. The Log D was -2.53 ± 0.19. The tracer displayed excellent stability in vitro. 68Ga-MALAT-1 ASO showed satisfactory binding ability to MHCC-LM3 cells; the biodistribution of [68Ga]Ga-MALAT-1-ASO in MHCC-LM3 tumour-bearing mice demonstrated specific uptake of the radiotracer (3.04 ± 0.11%ID/g). Micro-PET images of the MHCC-LM3 cell xenograft mouse model provided further evidence to support the hypothesis that [68Ga]Ga-MALAT-1-ASO can target tumours in vivo. CONCLUSIONS: We conclude that [68Ga]Ga labelling of MALAT-1 ASO is a convenient approach. The high accumulation of [68Ga]Ga-MALAT-1-ASO for tumours expressing MALAT-1 suggests that this radio compound may be used as a potential positron molecular probe. Molecular structure optimization studies need to be more in-depth to further reduce its background uptake and enhance tumour targeting.

[Value of 18F-FDG-PET/CT in diagnosis of classic fever of unknown origin].

OBJECTIVE: To evaluate the application of (18)F-FDG PET/CT in diagnosis of classic fever of unknown origin. METHODS: A total of 27 consecutive patients with classic fever of unknown origin (FUO) (19 men, 8 women; aged 24-82 y) underwent (18)F-FDG PET/CT scans. The images were interpreted by visual inspection and semiquantitative analysis(standardized uptake value, SUV). Final diagnosis was based on histopathology or clinical follow-up. RESULTS: The cause of FUO was confirmed by followed investigations in 21 of 27 cases after PET/CT scan, including 10 cases of infection, 4 of noninfectious inflammation, 4 of malignancies and 3 of miscellaneous disorders; and remaining 6 cases were still confirmed FUO. The sensitivity, specificity, positive predictive value, negative predictive value and accuracy were 100.0 %, 83.3%, 83.3%, 100.0% and 96.3%, respectively. CONCLUSION: For patients with fever of unknown origin, (18)F-FDG-PET/CT can be a sensitive, reliable imaging modality. It is suggested that (18)F-FDG-PET/CT should be considered earlier in detecting the causes of FUO, which is difficultly diagnosed by conventional modalities.

Role of fluorodeoxyglucose-PET versus fluorodeoxyglucose-PET/computed tomography in detection of unknown primary tumor: a meta-analysis of the literature.

The objectives of this study were to evaluate the diagnostic accuracy of fluorodeoxyglucose (FDG)-PET and FDG-PET/computed tomography (CT) in the detection of primary tumors in patients presenting with carcinoma of unknown primary (CUP) unidentified by conventional workup, and to compare the statistical difference between the FDG-PET and FDG-PET/CT. Twenty-eight studies (involving a total of 910 patients) published between 1990 and 2007 were reviewed. These studies evaluated the role of FDG-PET and FDG-PET/CT in the detection of unknown primary tumors after physical examination and conventional workup failed to detect a primary tumor. Systematic methods were used to identify, select, and evaluate the methodological quality of the studies as well as to summarize the overall findings of sensitivity, specificity, and detection capacity of the primary tumor. The overall sensitivity and specificity of FDG-PET in detecting unknown primary tumors were 0.78 [95% confidence interval (CI): 0.72-0.84)] and 0.79 (95% CI: 0.74-0.83), respectively. Furthermore, FDG-PET detected 28.54% of tumors that were not apparent after CUP failed to be detected by conventional workup. Data were collected on the locations of primary tumors detected by FDG-PET in 17 studies and detected by FDG-PET/CT in seven studies. Tumors from the base of the tongue accounted for 20.7% (six of 29) of all false-positive FDG-PET scans, corresponding to a false-positive rate of 28.6% (six of 29), much higher than tumors from the others. FDG-PET exhibited a lower sensitivity with respect to the tumors at the base of the tongue and tonsils, which was 68.2 and 76.7%, respectively. In the eight studies with 430 patients diagnosed with CUP by FDG-PET/CT, 31.4% (n=135) of primary tumors were detected. The pooled sensitivity and specificity were 0.81 (95% CI: 0.74-0.87) and 0.83 (95% CI: 0.78-0.87), respectively. FDG-PET and FDG-PET/CT can detect primary tumors that went undetected by physical examination and conventional workup. FDG-PET exhibited lower sensitivity with respect to the tumors at the base of the tongue and the tonsils.

Development of novel long noncoding RNA MALAT1 near-infrared optical probes for in vivo tumour imaging.

With the advent of next-generation sequencing technology, there is rapidly increasing interest in long noncoding RNAs (lncRNAs). The objectives of this study were to develop a novel lncRNA MALAT1 near-infrared optical probe, to evaluate the characteristics of this optical imaging probe in vitro and to determine whether it can be used for imaging MALAT1 expression in malignant tumours in vivo. Conjugation of Cy5.5 to MALAT1 ASO was accomplished using standard NHS (N-hydroxysuccinimide) ester procedures, and the labelled MALAT1 ASO was purified with a Glen-Pak DNA Purification Cartridge and reversed-phase high performance liquid chromatography (HPLC). The in vitro cellular uptake results showed that the percentage of cell binding increased with an increasing final concentration and increased with increasing incubation time for the MHCC-LM3 tumour cell flow cytometry analyses. in vivo optical imaging exhibited 5' (Cy5.5)-MALAT1 ASO uptake in the tumour with a maximum at 30 min p.i. that slowly washed out over time. High contrast to normal tissue was gradually observed from 4 h to 48 h p.i. Tumour-to-normal ratios of fluorescence intensities were plotted as a function of time. The in vivo competition assay showed little uptake of the probe into the tumours at any time point, indicating effective competition, selectivity of probe binding and retention by tumours in vivo. Our proposed Cy5.5 labelling of MALAT1 ASO can serve as a potent optical probe for in vivo imaging of tumour expressing MALAT1. Importantly, the successful development of optical probes provides a basis for specific molecular diagnoses in the field of lncRNAs.

Synergistic strengthening effect of nanocrystalline copper reinforced with carbon nanotubes.

In this study, a novel multi-walled carbon nanotubes reinforced nanocrystalline copper matrix composite with super high strength and moderate plasticity was synthesized. We successfully overcome the agglomeration problem of the carbon nanotubes and the grain growth problem of the nanocrystalline copper matrix by combined use of the electroless deposition and spark plasma sintering methods. The yield strength of the composite reach up to 692 MPa, which is increased by 2 and 5 times comparing with those of the nanocrystalline and coarse copper, respectively. Simultaneously, the plasticity of the composite was also significantly increased in contrast with that of the nanocrystalline copper. The increase of the density of the carbon nanotubes after coating, the isolation effect caused by the copper coating, and the improvement of the compatibility between the reinforcements and matrix as well as the effective control of the grain growth of the copper matrix all contribute to improving the mechanical properties of the composite. In addition, a new strengthening mechanism, i.e., the series-connection effect of the nanocrystalline copper grains introduced by carbon nanotubes, is proposed to further explain the mechanical behavior of the nanocomposite.

Characteristics of Antithyroid Drug-Induced Agranulocytosis in Patients with Hyperthyroidism: A Retrospective Analysis of 114 Cases in a Single Institution in China Involving 9690 Patients Referred for Radioiodine Treatment Over 15 Years.

BACKGROUND: Antithyroid drug (ATD)-induced agranulocytosis is a rare but life-threatening disease. Clinical features of ATD-induced agranulocytosis and outcomes remain incompletely understood. METHOD: Patients with clinically diagnosed ATD-induced agranulocytosis were retrospectively studied, involving 9690 patients who were referred for radioiodine treatment during a 15-year period (2000-2015) in China. There were 114 cases of agranulocytosis attributable to ATD included, and their clinical characteristics and therapy outcomes were analyzed. RESULTS: The female-to-male ratio of ATD-induced agranulocytosis was 10.4:1. The mean age (±standard deviation) of the patients with ATD-induced agranulocytosis was 41.7 ± 12.3 years. The methimazole and propylthiouracil doses given at the onset were 22.9 ± 8.0 mg/day and 253.6 ± 177.5 mg/day, respectively. ATD-induced agranulocytosis occurred in 45.1%, 74.3%, and 88.5% of patients within 4, 8, and 12 weeks of the onset of ATD therapy, respectively. Fever (78.9%) and sore throat (72.8%) were the most common symptoms when agranulocytosis was diagnosed. The mean recovery time of agranulocytosis was 13.41 ± 7.14 days. Recovery time in the granulocyte colony-stimulating factor (G-CSF)-treated group (12.7 ± 6.0 days) did not differ from that in the group not treated with G-CSF (16.4 ± 10.6 days; p = 0.144). Treatment with (131)I was successful in 87/98 patients (88.8%). The success rate of (131)I was equivalent (p = 1.000) between the groups receiving methimazole (88.2%, 75/85) and propylthiouracil (92.3%, 12/13). CONCLUSIONS: This largest single-institution study in China shows that ATD-induced agranulocytosis tends to occur within the first 12 weeks after the onset of ATD therapy. For patients with ATD-induced agranulocytosis, G-CSF does not improve the recovery time of agranulocytosis, and (131)I is an optimal treatment approach.

Primary pulmonary amyloidosis misdiagnosed as malignancy on dual-time-point fluoro-deoxyglucose positron emission tomography/computed tomography: A case report and review of the literature.

Primary pulmonary amyloidosis is an uncommon manifestation, characterized by amyloid deposition in the lungs and other associated tissue. The clinical presentation of amyloidosis is variable, with non-specific symptoms. The current study reports the case of a 59-year-old female presenting with primary pulmonary amyloidosis, indistinguishable from lung malignancy based on 18F-fluoro-deoxyglucose (18F-FDG) accumulation on dual-time-point (DTP) FDG-positron emission tomography/computed tomography (PET/CT) imaging and the similarities in morphological changes. A percutaneous CT-guided thoracoscopic biopsy was subsequently performed. Histological examination revealed that the specimens contained amorphous, homogeneous material with a number of polyclonal plasma cells, lymphocytes and giant cells. A diagnosis of primary nodular parenchymal pulmonary amyloidosis was determined, and the patient was discharged without chemotherapy. The patient remained in good clinical condition during follow-up. The present case indicated that localized nodular amyloidosis with increased FDG uptake on DTP FDG PET must be considered in the differential diagnosis of growing lung nodules, and that a histological examination must be conducted to distinguish this condition from malignancies of the lung.

18F-FDG PET/CT in patients with adult-onset Still's disease.

(18)F-fluorodeoxyglucose positron emission tomography/computed tomography ((18)F-FDG PET/CT) has become useful for the detection and diagnosis of inflammatory conditions, including rheumatic diseases, immunoglobulin (Ig) G4-related disease and giant cell arteritis. However, few articles based on small sample sizes (n = 7) diagnosed as adult-onset Still's disease (AOSD) have been published. The study aim was to observe the reliable characteristics and usefulness of (18)F-FDG PET/CT for the evaluation of consecutive patients with AOSD. Eligible patients were selected from among those who had undergone (18)F-FDG PET/CT between May 2007 and June 2014. Twenty-six consecutive AOSD patients were recruited retrospectively according to criteria set by Yamaguchi et al. All patients underwent evaluation by (18)F-FDG PET/CT. The characteristics and usefulness of (18)F-FDG PET/CT for evaluation of consecutive patients with AOSD were evaluated. All 26 patients had (18)F-FDG-avid lesion(s) related to their particular disease. Diffuse and homogeneous accumulation of (18)F-FDG was seen in the bone marrow (26/26; 100 %; maximum standardized uptake (SUVmax), 2.10-6.73) and spleen (25/26; 96.15 %). The SUVmax of affected lymph nodes was 1.3-9.53 (mean ± SD, 4.12 ± 2.24). The SUVmax and size factors (maximum diameter and areas) of affected lymph nodes were significantly different (P = 0.033 and P = 0.012, respectively). (18)F-FDG PET/CT showed the general distribution of (18)F-FDG accumulation. This factor helped to exclude malignant disease and aided the diagnosis of AOSD (42.3 %) in 11 cases when combined with clinical features and aided decisions regarding appropriate biopsy sites, such as the lymph nodes (n = 9) and bone marrow (n = 13). (18)F-FDG PET/CT is a unique imaging method for the assessment of metabolic activity throughout the body in subjects with AOSD. Characteristics or patterns of AOSD observed on (18)F-FDG PET/CT can be used for the indication and diagnosis or to guide the clinical management of ASOD.