Probing into the theory of impact sensitivity: propelling the understanding of phonon-vibron coupling coefficients.

The determination of impact sensitivity of energetic materials traditionally relies on expensive and safety-challenged experimental means. This has instigated a shift towards scientific computations to gain insights into and predict the impact response of energetic materials. In this study, we refine the phonon-vibron coupling coefficients ζ in energetic materials subjected to impact loading, building upon the foundation of the phonon up-pumping model. Considering the full range of interactions between high-order phonon overtones and molecular vibrational frequencies, this is a pivotal element for accurately determining phonon-vibron coupling coefficients ζ. This new coupling coefficient ζ relies exclusively on phonon and molecular vibrational frequencies within the range of 0-700 cm-1. Following a regression analysis involving ζ and impact sensitivity (H50) of 45 molecular nitroexplosives, we reassessed the numerical values of damping factors, establishing a = 2.5 and b = 35. This coefficient is found to be a secondary factor in determining sensitivity, secondary to the rate of decomposition propagation and thermodynamic factor (heat of explosion). Furthermore, the relationship between phonon-vibron coupling coefficients ζ and impact sensitivity was studied in 16 energetic crystalline materials and eight nitrogen-rich energetic salts. It was observed that as the phonon-vibron coupling coefficient increases, the tendency for reduced impact sensitivity H50 still exists.

A Method for Predicting the Melting Temperature of Ionic Compounds.

Predicting the melting temperature of materials has always been a topic of great concern. This article proposes an alternative model for determining the melting temperature of materials based on the main idea of the Lindemann melting criterion combined with the first-principles calculations of density functional theory. To verify the accuracy of the melting model, this article selected typical ionic crystals of MgO and 10 alkali metal halides as the validation objects. The calculation results indicate that the melting temperature of the MgO crystals and I-VII compounds is in good agreement with the experimental results.

Molecular Structures, Dipole Moments, and Electronic Properties of ß-HMX under External Electric Field from First-Principles Calculations.

In order to investigate the impact of an external electric field on the sensitivity of ß-HMX explosives, we employ first-principles calculations to determine the molecular structure, dipole moment, and electronic properties of both ß-HMX crystals and individual ß-HMX molecules under varying electric fields. When the external electric field is increasing along the [100], [010], and [001] crystallographic directions of ß-HMX, the calculation results indicate that an increase in the bond length (N1-N3/N1'-N3') of the triggering bond, an increase in the main Qnitro (N3, N3') value, an increase in the minimum surface electrostatic potential, and a decrease in band gap all contribute to a reduction in its stability. Among these directions, the [010] direction exhibits the highest sensitivity, which can be attributed to the significantly smaller effective mass along the [010] direction compared with the [001] and [100] directions. Moreover, the application of an external electric field along the Y direction of the coordinate system on individual ß-HMX molecules reveals that the strong polarization effect induced by the electric field enhances the decomposition of the N1-N3 bonds. In addition, due to the periodic potential energy of ß-HXM crystal, the polarization effect of ß-HMX crystal caused by an external electric field is much smaller than that of a single ß-HXM molecule.

Triggering the mechanism of the initial reaction of energetic materials under pressure based on Raman intensity analysis.

The Raman intensity and other stoichiometric calculations of nitromethane (NM) and 2-nitrimino-5-nitro-hexahydro-1,3,5-triazine (NNHT) have been made by using first-principles density functional theory. We propose a method to judge the initial reaction mechanism of NM and NNHT under pressure based on the Raman intensity. Both the resulting NM and NNHT undergo hydrogen transfer and conventional trigger bond cleavage. And the results obtained from the Raman peak intensities infer a reaction path that is not inferior to the traditional C-NO2 and N-NO2 bond cleavage, thus verifying our results.

Atomic mean square displacement study of the bond breaking mechanism of energetic materials before explosive initiation.

Understanding and predicting the bond breaking mechanism of energetic materials before explosion initiation is one of the huge challenges in explosion science. By means of the mean square displacement of the atom from the equilibrium position and theoretical bond breaking tensile change of the chemical bond, we establish a new criterion to judge whether the chemical bond is broken. Further, α-RDX is used as the verification object to verify the accuracy of this model. We obtained an initial decomposition temperature of 434-513 K for α-RDX at 0 GPa, and the initial bond breaking type was N-NO2. Finally, based on this model, we discussed in detail the breaking of chemical bonds of solid nitromethane near the detonation pressure. We think that the high temperature and high pressure caused by the shock wave may break all the chemical bonds of nitromethane near the detonation pressure.

A simulation study on the phase transition behavior of solid nitrogen under extreme conditions.

There are numerous examples of materials that exhibit interesting phenomena at extremely low temperatures, but the difficulty of obtaining absolute zero at high pressure in experiments is sometimes a hurdle to reveal the exact explanation of these low temperature phenomena. Based on the calculations of the phonon spectrum and Gibbs free energy of α-N2 and γ-N2 under different pressures, we found that solid nitrogen at 0 K showed a re-entrant phase transition under continuously increasing pressure. The extremely low temperature in this pressure range turned out to be the main external condition for inducing phase transition as well as phase reversal.

Composition and structural characteristics of compressed alkaline earth metal hydrides.

The metallization of alkaline earth metal hydrides offers a way to achieve near-room temperature superconductivity. In order to explore the metallization mechanism of these hydrides under pressure, a detailed understanding of the property changes of alkaline earth metal hydrides is required. Based on first-principles calculations, we have systematically investigated the dihydrides (XH2, X = Be, Mg, Ca, Sr, Ba) and tetrahydrides (XH4, X = Mg, Ca, Sr, Ba) of alkaline earth metals, respectively. By applying external pressure, we show that the structures of these alkaline earth metal hydrides undergo a series of phase transitions. Moreover, we investigate how the size of the bandgap decreases and eventually closes and reveal the role of electronegativity of metal elements in the critical pressure of hydride metallization. Remarkably, the hydrogen units (H6 or H8) formed in XH4 can accelerate the metallization process. The increase of the energy level difference in hydrogen units promotes the electroacoustic coupling effect, which is conducive to realization of high superconducting transition temperature (Tc). Our theoretical findings identify MgH4-I4/mmm as having potential to be a high-temperature superconductor and provide unusual ideas for the search of unknown high-temperature superconducting materials.

Electrons and phonons of the discharge products in the lithium-oxygen and lithium-sulfur batteries from first-principles calculations.

Batteries have become a ubiquitous daily necessity, which are popularly applied to mobile phones and electric vehicles according to their size. Improving the battery cycle life and storage is important, but unexpected discharge products still restrict the upper limit of batter performance such as Li2O2, LiO2, and Li2S. In this study, we calculated electrons and phonons presenting the basic energy states in crystal using the first-principles calculations. The Li2O2 and Li2S are almost insulating due to the wide bandgap from their electronic structure, and doped-active p-orbital may be one of the pathways to improve crystal conduction due to the tendency of the density of states. The LiO2 is metallic, and the electronic structure and phonons show that the discharge products have an ionic feature. In addition, the ionic crystal can produce a larger DC permittivity because it possesses macroscopic polarisation. For Li2O2 and Li2S, the Raman peak of the O-O bonding is strong, while the Raman peak of the S-ion is very weak. The enhanced Raman peak of the S-ion presents a possibility to prevent the shuttle effect in Li-S batteries.

Theoretical study on the correlation between the structure, excess energy, surface energy, electronic structure, nitro charge, and friction sensitivity of N,N'-dinitroethylenediamine (EDNA).

The sensitivity of energetic materials along different crystal directions is not the same and is anisotropic. In order to explore the difference in friction sensitivity of different surfaces, we calculated the structure, excess energy, surface energy, electronic structure, and the nitro group along (1 1 1), (1 1 0), (1 0 1), (0 1 1), (0 0 1), (0 1 0), and (1 0 0) surfaces of EDNA based on density functional theory. The analysis results showed that relative to other surfaces, the (0 0 1) surface has the shortest N-N average bond length, largest N-N average bond population, smallest excess energy and surface energy, widest band gap, and the largest nitro group charge value, which indicates that the (0 0 1) surface has the lowest friction sensitivity compared to other surfaces. Furthermore, the conclusions obtained by analyzing the excess energy are consistent with the results of the N-N bond length and bond population, band gap, and nitro charge. Therefore, we conclude that the friction sensitivity of different surfaces of EDNA can be evaluated using excess energy.

Initial Decomposition of DATB Induced by an External Electric Field.

1,3-Diamino-2,4,6-trinitrobenzene (DATB), a nitro aromatic explosive with excellent properties, can be detonated by an electric field. Using first-principles calculation, we have investigated the initial decomposition of DATB under an electric field. In the realm of electric fields, the rotation of the nitro group around the benzene ring will cause deformation of the DATB structure. Furthermore, when an electric field is applied along the [100] or [001] direction, the C4-N10/C2-N8 bonds initiate decomposition due to electron excitation. On the contrary, the electric field along the [010] direction has a weak influence on DATB. These, together with electronic structures and infrared spectroscopy, give us a visual perspective of the energy transfer and the decomposition caused by C-N bond breaking.

The effect of pressure on the structural, electronic and vibrational properties of solid carbon dioxide phases.

The structural, electronic and vibrational properties of solid carbon dioxide phases (I, II, III, and IV) under high pressure are studied using first-principles calculations. The calculated structural parameters are in good agreement with the experimental values. The third-order Birch-Murnaghan equation of state is fitted, and the corresponding parameters are obtained. We obtained the phase boundary points of each phase and plotted the phase diagram of solid carbon dioxide. The influence of pressure on the band structure and density of states is studied. The vibrational properties of the four phases of carbon dioxide were studied in detail, and the infrared and Raman spectra of the four phases were obtained. It can be seen from the calculated spectrum that the number and frequency of vibration peaks are in good agreement with the experimental values. And, we also analyze the influence of pressure on the frequency of vibration mode.

Active Sites in Single-Layer BiOX (X = Cl, Br, and I) Catalysts for the Hydrogen Evolution Reaction.

Although few-layer bismuth oxyhalides (BiOX, X = Cl, Br, and I) have been shown to be appropriate for photocatalytic hydrogen production, the hydrogen evolution reaction (HER) activity of BiOX is unrevealed. Herein, the origins of catalytic activity on single-layer BiOX are investigated by using the density functional theory. The grand potential calculations show that the Bi- and BiO-terminations of single-layer BiOX are stable in O-poor and O-rich environments, respectively. The Bi- and BiO-terminations of single-layer BiOX are found to have obviously active sites for HER, whereas the (001) basal planes are inert. The Gibbs free energies for the adsorption of hydrogen atoms on the Bi- and BiO-terminations are close to the optimal value of 0 eV, indicating that single-layer BiOX possess favorable HER performances. The enhanced HER activities on the Bi- and BiO-terminations are attributed to the localized edge states around the Fermi level, which are caused by the Bi 6p-orbital density of the fringe bismuth atoms and O 2p-orbital density of the fringe oxygen atoms, respectively. The results of this work suggest that single-layer BiOX are a family of promising catalysts for water splitting.

Characteristics of lateral and hybrid heterostructures based on monolayer MoS2: a computational study.

Novel MoS2/(MX2)n lateral and (MoS2)/(MX2)n-BN hybrid heterostructures have been designed on monolayer MoS2 to extend its applications. The electronic, interfacial and optical properties of the lateral and hybrid heterostructures have been investigated comparatively using first-principles calculations. It was found that the charge distributions, band gaps, band levels, electrostatic potentials, and optical absorption of the MoS2/(MX2)n lateral heterostructures depend greatly on the width n of MX2, irrespective of the size of the lateral heterostructures. The CBM states of the MoS2/(MX2)n lateral heterostructures dominated by the dz2 orbitals are localized around MoS2, whereas the VBM states of the MoS2/(MX2)n lateral heterostructures are dominated by the MX2 region. Through regulating the width n of the MX2 region in the MoS2/(MX2)n lateral heterostructures, the optical absorption of the lateral heterostructures under visible light can be increased, and the CBM and VBM states of the lateral heterostructures can be located above the hydrogen reduction potential and below the water oxidation potential, respectively. The similar characteristics were observed in the MoS2/(MX2)n-BN hybrid heterostructures, indicating that BN is a good substrate for the MoS2/(MX2)n lateral heterostructures. The analysis implies that forming the lateral and hybrid heterostructures is an effective way to extend the applications of monolayer MoS2 in photocatalytic water and photovoltaic devices.

Influences of S, Se, Te and Po substitutions on structural, electronic and optical properties of hexagonal CuAlO2 using GGA and B3LYP functionals.

The effects of X-doping (X = S, Se, Te and Po) on the structural, electronic and optical properties of hexagonal CuAlO2 were studied using first-principles density functional theory. The calculated results showed the obtained lattice constants to increase with increasing atomic number, and the X-doping to be energetically more favorable under Al-rich conditions. The calculated electronic properties showed decreased bandgaps with increasing atomic number, which was due to the better covalent hybridizations after sulfuration doping. The enhanced covalency was further confirmed by calculating the Mulliken atomic populations and bond populations. The density of states indicated the increase of the contribution to antibonding from the X-p states to be a benefit for p-type conductivity. Moreover, the X-doping induced a red shift of the absorption edge.

Tuning the electronic properties of Ti-MoS2 contacts through introducing vacancies in monolayer MoS2.

The effect of vacancies in monolayer MoS2 on the electronic properties of a Ti-MoS2 top contact has been investigated using first-principles calculations. A Mo-vacancy is easier to form than a S-vacancy in a Ti-MoS2 top contact, especially under oxidation conditions. A Mo-vacancy eliminates the Schottky barrier of the Ti-MoS2 top contact, and a S-vacancy reduces the Schottky barrier from 0.28 to 0.15 eV. Mo-vacancies are beneficial for obtaining a high quality p-type Ti-MoS2 top contact, whereas S-vacancies are favorable to achieve a high quality n-type Ti-MoS2 top contact. Moreover, defective Ti-MoS2 top contacts have stronger dipole layers, a higher potential step and more transferred charges than a perfect ones. The electronic properties of Ti-MoS2 top contacts can be tuned by intrinsic vacancies in monolayer MoS2. Our findings provide important insights into the future design and fabrication of novel nanoelectronic devices with monolayer MoS2.

Structural and electronic properties of clathrate-like hydride: MH6 and MH9 (M = Sc, Y, La).

CONTEXT: The addition of central metal atoms to hydrogen clathrate structures is thought to provide a certain amount of "internal chemical pressure" to offset some of the external physical pressure required for compound stability. The size and valence of the central atoms significantly affect the minimum pressure required for the stabilization of hydrogen-rich compounds and their superconducting transition temperature. In recent years, many studies have calculated the minimum stable pressure and superconducting transition temperature of compounds with H24, H29, and H32 hydrogen clathrates, with centrally occupied metal atoms. In order to investigate the stability and physical properties of compounds with H cages in which the central atoms change in the same third group B, herein, based on first-principles calculations, we systematically investigated the lattice parameters, crystal volume, band structures, density of states, Mulliken analysis, charge density, charge density difference, and electronic localization function in I m 3 ¯ m -MH6 and P63/mmc-MH9 systems with different centered rare earth atoms M (M = Sc, Y, La) under a series of pressures. We find that for MH9, the pressure mainly changes the crystal lattice parameters along the c-axis, and the contributions of the different H atoms in MH9 to the Fermi level are H3 > H1 > H2. The density of states at the Fermi level of MH6 is mainly provided by H 1 s. Moreover, the size of the central atom M is particularly important for the stability of the crystal. By observing a series of properties of the structures with H24 and H29 cages wrapping the same family of central atoms under a series of pressures, our theoretical study is helpful for further understanding the formation mechanism of high-temperature superconductors and provides a reference for future research and design of high-temperature superconductors. METHODS: The first principles based on the density functional theory and density functional perturbation theory were employed to execute all calculations by using the CASTEP code in this work.

Structural, elastic, mechanical, electronic, and optical properties of cubic K2Pb2O3 from first-principle study.

CONTEXT: Based on first principles, the structure, elasticity, mechanics, electronics, and optical properties of cubic K2Pb2O3 were studied. The structural parameters calculated by this method are close to the previous theoretical results. The elastic constant, bulk modulus, shear modulus, Young's modulus, Poisson's ratio, and mechanical stability are studied, and it is shown that cubic K2Pb2O3 is mechanically stable, isotropic, and brittleness. The electrical conductivity and chemical bonding of cubic K2Pb2O3 were analyzed based on the calculated band structure, density of states (DOS), and bond populations. The dispersion of optical functions, including the dielectric function, refractive index, extinction coefficient, reflectivity, absorption coefficient, and loss function, is displayed and analyzed. METHODS: All computations have been carried out based on density functional theory (DFT) as implemented in the CASTEP code. The norm conservation pseudopotential method is used to exchange correlation functionals within the generalized gradient approximation (GGA).

Study of the relationship between pressure and sensitivity of energetic materials based on first-principles calculation.

CONTEXT: In order to study the relationship between the sensitivity and pressure of energetic materials, six kinds of energetic materials were selected as the research object. The crystal structure, electronic, and phonon properties under hydrostatic pressure of 0 ~ 45 GPa were calculated by first principles. The calculation results show that the lattice parameters and band gap values of these six energetic materials decrease with the increase of pressure. The peak of the density of states decreases and moves to the low energy direction, and the electrons become more active. Meanwhile, the effect of pressure on the sensitivity of the energetic materials is analyzed based on the multi-phonon up-pumping theory. The number of doorway modes and integral of projected phonon density of states under high pressure is calculated. The results show that both of them increase with the increase of pressure. And the smaller the value of the band gap, the larger the number of doorway modes and integral of projected phonon density of states, and the more sensitive the energetic material is. METHODS: All calculations are performed using the Materials Studio software based on density functional theory. The Perdew-Burke-Ernzerhof (PBE) functional of the generalized gradient approximation (GGA) is used to calculate the exchange correlation function, and the Grimme dispersion correction method is used to deal with the weak intermolecular interaction. The structure of the compound was optimized by BFGS algorithm. The linear response is used to calculate the phonon properties of energetic materials. The plane wave cutoff energy was set to 830 eV. The K-point grids of TATB, FOX-7, TNX, RDX, TNT, and HMX were chosen as 2 × 2 × 2, 2 × 2 × 1, 2 × 1 × 1, 1 × 1 × 1, 1 × 2 × 1, and 2 × 1 × 2.

Molecular dynamics simulation of sensitivity of HMX, FOX-7, and TATB crystals.

METHODS: This study used molecular dynamics (MD) to simulate three materials (HMX, FOX-7, and TATB) under the NVT ensemble. Six temperatures (100 K, 200 K, 300 K, 400 K, 500 K, and 600 K) were simulated. In addition, the trigger bond lengths, energy bands, and density of states of three materials were obtained at different temperatures and compared with the calculated results at 0 K. CONTEXT: The results indicate that the trigger bond lengths of the three materials are very close to the experimental values. Overall, the maximum and average bond lengths of the trigger bonds increase with increasing temperature. The band gap value decreases with increasing temperature. The changes in trigger bond length and band gap value are consistent with the experimental fact that sensitivity increases with increasing temperature. And Eg > 1 eV is consistently found within the temperature range of 0-600 K, indicating that all three materials are non-metallic compounds.

The calculated electronic and optical properties of ß-Ga2O3 based on the first principles.

INTRODUCTION: The electronic and optical properties of ß-Ga2O3 have been investigated by CASTEP using first principles. It is found that ß-Ga2O3 has an indirect band gap and the conduction band base is located at the Γ point. The stability of ß-Ga2O3 is demonstrated by the calculation of elastic constants, and the ductility of ß-Ga2O3 is demonstrated by the ratio of Poisson's ratio to shear modulus. The optical property analysis shows that ß-Ga2O3 has a high absorption capacity in the ultraviolet region, but a low absorption capacity in visible and infrared light. CONTEXT: The structure, optical, and electronic properties of ß-Ga2O3 are calculated and analyzed based on first-principles calculation. The optimized structures of ß-Ga2O3 are in good agreement with previously studied. In this paper, the elastic, electronic, and optical properties of ß-Ga2O3 are calculated. METHODS: The CASTEP code was employed to execute these calculations in the present work, where the exchange-correlation interactions were treated in the generalized gradient approximation (GGA) using the Perdew-Burke-Ernzerhof (PBE) functional in the geometry optimizations and electronic and elastic properties.