Integrating Rh Species with NiFe-Layered Double Hydroxide for Overall Water Splitting.

NiFe-layered double hydroxide (LDH) is thought of as a promising bifunctional water-splitting catalyst, owing to its excellent performances for alkaline oxygen evolution reactions (OERs). However, it shows extremely poor activity toward hydrogen evolution reactions (HERs) due to the weak hydrogen adsorption. We demonstrated that the integration of Rh species and NiFe-LDH can dramatically improve its HER kinetics without sacrificing the OER performance. The Rh species were initially integrated into NiFe-LDH as oxidized dopants and metallic clusters (< 1 nm). In 1 M KOH electrolyte, an overpotential of 58 mV is needed to catalyze 10 mA cm-2 HER current density. Furthermore, this catalyst only requires 1.46 V to drive an electrolyzer at 10 mA cm-2. A strong interaction between metallic Rh clusters and NiFe hydroxide during the HER process is revealed. The theoretical calculation shows the Rh ions replace Fe ions as the major active sites that are responsible for OERs.

t1-Noise eliminated dipolar heteronuclear multiple-quantum coherence solid-state NMR spectroscopy.

Heteronuclear correlation (HETCOR) spectroscopy is one of the key tools in the arsenal of the solid-state NMR spectroscopist to probe chemical and spatial proximities between two different nuclei and enhance spectral resolution. Dipolar heteronuclear multiple-quantum coherence (D-HMQC) is a powerful technique that can be potentially utilized to obtain 1H detected 2D HETCOR solid-state NMR spectra of any NMR active nucleus. A long-standing problem in 1H detected D-HMQC solid-state NMR experiments is the presence of t1-noise which reduces sensitivity and impedes spectral interpretation. In this contribution, we describe novel pulse sequences, termed t1-noise eliminated (TONE) D-HMQC, that minimize t1-noise and can provide higher sensitivity and resolution than conventional D-HMQC. Monte-Carlo and numerical simulations confirm that t1-noise in conventional D-HMQC primarily occurs because random MAS frequency fluctuations cause variations in the NMR signal amplitude from scan to scan, leading to imperfect cancellation of uncorrelated signals by phase cycling. The TONE D-HMQC sequence uses 1H π-pulses to refocus the evolution of 1H CSA across each SR421 recoupling block, improving the stability of the pulse sequence to random MAS frequency fluctuations. The 1H refocusing pulses also restore the orthogonality of in-phase and anti-phase magnetization for all crystallite orientations at the end of each recoupling block, enabling the use of 90° flip-back or LG spin-lock trim pulses to reduce the intensity of uncorrelated signals. We demonstrate the application of these methods to acquire 1H detected 2D 1H{35Cl} and 1H{13C} HETCOR spectra of histidine·HCl·H2O with reduced t1-noise. To show generality, we also apply these methods to obtain 2D 1H{17O} spectra of 20%-17O fmoc-alanine and for the first time at natural abundance, 2D 1H{25Mg} HETCOR spectra of magnesium hydroxide. The TONE D-HMQC sequences are also used to probe 1H-25Mg and 1H-27Al proximities in Mg-Al layered double hydroxides and confirm the even mixing of Mg and Al in these materials.

In Situ Formed Pt3Ti Nanoparticles on a Two-Dimensional Transition Metal Carbide (MXene) Used as Efficient Catalysts for Hydrogen Evolution Reactions.

The design of efficient catalysts capable of delivering high currents at low overpotentials for hydrogen evolution reactions (HERs) is urgently needed to use catalysts in practical applications. Herein, we report platinum (Pt) alloyed with titanium (Ti) from the surface of Ti3C2Tx MXenes to form Pt3Ti intermetallic compound (IMC) nanoparticles (NPs) via in situ coreduction. In situ X-ray absorption spectroscopy (XAS) indicates that Pt undergoes a temperature-dependent transformation from single atoms to intermetallic compounds, and the catalyst reduced at 550 °C exhibits a superior HER performance in acidic media. The Pt/Ti3C2Tx-550 catalyst outperforms commercial Pt/Vulcan and has a small overpotential of 32.7 mV at 10 mA cm-2 and a low Tafel slope of 32.3 mV dec-1. The HER current was normalized by the mass and dispersion of Pt, and the mass activity and specific activity of Pt/Ti3C2Tx-550 are 4.4 and 13 times higher, respectively, than those of Pt/Vulcan at an overpotential of 70 mV. The density functional theory (DFT) calculations suggest that the (111)- and (100)-terminated Pt3Ti nanoparticles exhibit *H binding comparable to Pt(111), while the (110) termination has an *H adsorption that is too exergonic, thus poisoned in the low overpotential region. This work demonstrates the potential of MXenes as platforms for the design of electrocatalysts and may spur future research for other MXene-supported metal catalysts that can be used for a wide range of electrocatalytic reactions.

Metal-Organic-Framework-Derived Carbons: Applications as Solid-Base Catalyst and Support for Pd Nanoparticles in Tandem Catalysis.

The facile pyrolysis of a bipyridyl metal-organic framework, MOF-253, produces N-doped porous carbons (Cz-MOF-253), which exhibit excellent catalytic activity in the Knoevenagel condensation reaction and outperform other nitrogen-containing MOF-derived carbons. More importantly, by virtue of their high Lewis basicity and porous nature, Cz-MOF-253-supported Pd nanoparticles (Pd/Cz-MOF-253-800) show excellent performance in a one-pot sequential Knoevenagel condensation-hydrogenation reaction.

Facile Fabrication of Hierarchical MOF-Metal Nanoparticle Tandem Catalysts for the Synthesis of Bioactive Molecules.

Multifunctional metal-organic frameworks (MOFs) that possess permanent porosity are promising catalysts in organic transformation. Herein, we report the construction of a hierarchical MOF functionalized with basic aliphatic amine groups and polyvinylpyrrolidone-capped platinum nanoparticles (Pt NPs). The postsynthetic covalent modification of organic ligands increases basic site density in the MOF and simultaneously introduces mesopores to create a hierarchically porous structure. The multifunctional MOF is capable of catalyzing a sequential Knoevenagel condensation-hydrogenation-intramolecular cyclization reaction. The unique selective reduction of the nitro group to intermediate hydroxylamine by Pt NPs supported on MOF followed by intramolecular cyclization with a cyano group affords an excellent yield (up to 92%) to the uncommon quinoline N-oxides over quinolines. The hierarchical MOF and polyvinylpyrrolidone capping agent on Pt NPs synergistically facilitate the enrichment of substrates and thus lead to high activity in the reduction-intramolecular cyclization reaction. The bioactivity assay indicates that the synthesized quinoline N-oxides evidently inhibit the proliferation of lung cancer cells. Our findings demonstrate the feasibility of MOF-catalyzed direct synthesis of bioactive molecules from readily available compounds under mild conditions.