Co-Crystalline Solid Solution Affords a High-Soluble and Fast-Absorbing Form of Praziquantel.

Praziquantel (PZQ) is a chiral class-II drug, and it is used as a racemate for the treatment of schistosomiasis. The knowledge of several cocrystals with dicarboxylic acids has prompted the realization of solid solutions of PZQ with both enantiomers of malic acid and tartaric acid. Here, the solid form landscape of such a six-component system has been investigated. In the process, two new cocrystals were structural-characterized and three non-stoichiometric, mixed crystal forms identified and isolated. Thermal and solubility analysis indicates a fourfold solubility advantage for the newly prepared solid solutions over the pure drug. In addition, a pharmacokinetic study was conducted in rats, which involved innovative mini-capsules for the oral administration of the solid samples. The available data indicate that the faster dissolution rate of the solid solutions translates in faster absorption of the drug and helps maintain a constant steady-state concentration.

The role of solvation in proton transfer reactions: implications for predicting salt/co-crystal formation using the ΔpKa rule.

The ΔpKa rule is commonly applied by chemists and crystal engineers as a guideline for the rational design of molecular salts and co-crystals. For multi-component crystals containing acid and base constituents, empirical evidence has shown that ΔpKa > 4 almost always leads to salts, ΔpKa < -1 almost always leads to co-crystals and ΔpKa between -1 and 4 can be either. This paper reviews the theoretical background of the ΔpKa rule and highlights the crucial role of solvation in determining the outcome of the potential proton transfer from acid to base. New data on the frequency of the occurrence of co-crystals and salts in multi-component crystal structures containing acid and base constituents show that the relationship between ΔpKa and the frequency of salt/co-crystal formation is influenced by the composition of the crystal. For unsolvated co-crystals/salts, containing only the principal acid and base components, the point of 50% probability for salt/co-crystal formation occurs at ΔpKa ≈ 1.4, while for hydrates of co-crystals and salts, this point is shifted to ΔpKa ≈ -0.5. For acid-base crystals with the possibility for two proton transfers, the overall frequency of occurrence of any salt (monovalent or divalent) versus a co-crystal is comparable to that of the whole data set, but the point of 50% probability for observing a monovalent salt vs. a divalent salt lies at ΔpKa,II ≈ -4.5. Hence, where two proton transfers are possible, the balance is between co-crystals and divalent salts, with monovalent salts being far less common. Finally, the overall role played by the "crystal" solvation is illustrated by the fact that acid-base complexes in the intermediate region of ΔpKa tip towards salt formation if ancillary hydrogen bonds can exist. Thus, the solvation strength of the lattice plays a key role in the stabilisation of the ions.

Reversible Switching between Nonporous and Porous Phases of a New SIFSIX Coordination Network Induced by a Flexible Linker Ligand.

Closed-to-open structural transformations in flexible coordination networks are of potential utility in gas storage and separation. Herein, we report the first example of a flexible SiF62--pillared square grid material, [Cu(SiF6)(L)2]n (L = 1,4-bis(1-imidazolyl)benzene), SIFSIX-23-Cu. SIFSIX-23-Cu exhibits reversible switching between nonporous (ß1) and several porous (α, γ1, γ2, and γ3) phases triggered by exposure to N2, CO2, or H2O. In addition, heating ß1 to 433 K resulted in irreversible transformation to a closed polymorph, ß2. Single-crystal X-ray diffraction studies revealed that the phase transformations are enabled by rotation and geometrical contortion of L. Density functional theory calculations indicated that L exhibits a low barrier to rotation (as low as 8 kJmol-1) and a rather flat energy surface. In situ neutron powder diffraction studies provided further insight into these sorbate-induced phase changes. SIFSIX-23-Cu combines stability in water for over a year, high CO2 uptake (ca. 216 cm3/g at 195 K), and good thermal stability.

Desymmetrization by Asymmetric Copper-Catalyzed Intramolecular C-H Insertion Reactions of α-Diazo-ß-oxosulfones.

Effective desymmetrization in copper-catalyzed intramolecular C-H insertion reactions of α-diazo-ß-oxosulfones in the formation of fused thiopyran dioxides is described for the first time. The use of a copper-bis(oxazoline)-NaBARF catalyst complex system leads to formation of the major thiopyran dioxide stereoisomer with up to 98:2 dr and up to 98% ee. The effect of varying the bis(oxazoline) ligand, copper salt, and site of C-H insertion on both diastereo- and enantioselectivities of these intramolecular C-H insertion reactions has been investigated. Similarly, desymmetrization in the formation of a fused cyclopentanone proceeds with up to 64% ee. These results represent the highest enantioselectivity reported to date in a copper-mediated desymmetrization through C-H insertion.

Reversible Switching between Highly Porous and Nonporous Phases of an Interpenetrated Diamondoid Coordination Network That Exhibits Gate-Opening at Methane Storage Pressures.

Herein, we report that a new flexible coordination network, NiL2 (L=4-(4-pyridyl)-biphenyl-4-carboxylic acid), with diamondoid topology switches between non-porous (closed) and several porous (open) phases at specific CO2 and CH4 pressures. These phases are manifested by multi-step low-pressure isotherms for CO2 or a single-step high-pressure isotherm for CH4 . The potential methane working capacity of NiL2 approaches that of compressed natural gas but at much lower pressures. The guest-induced phase transitions of NiL2 were studied by single-crystal XRD, in situ variable pressure powder XRD, synchrotron powder XRD, pressure-gradient differential scanning calorimetry (P-DSC), and molecular modeling. The detailed structural information provides insight into the extreme flexibility of NiL2 . Specifically, the extended linker ligand, L, undergoes ligand contortion and interactions between interpenetrated networks or sorbate-sorbent interactions enable the observed switching.

Viologen-Based Conjugated Covalent Organic Networks via Zincke Reaction.

Morphology influences the functionality of covalent organic networks and determines potential applications. Here, we report for the first time the use of Zincke reaction to fabricate, under either solvothermal or microwave conditions, a viologen-linked covalent organic network in the form of hollow particles or nanosheets. The synthesized materials are stable in acidic, neutral, and basic aqueous solutions. Under basic conditions, the neutral network assumes radical cationic character without decomposing or changing structure. Solvent polarity and heating method determine product morphology. Depending upon solvent polarity, the resulting polymeric network forms either uniform self-templated hollow spheres (HS) or hollow tubes (HT). The spheres develop via an inside-out Ostwald ripening mechanism. Interestingly, microwave conditions and certain solvent polarities result in the formation of a robust covalent organic gel framework (COGF) that is organized in nanosheets stacked several layers thick. In the gel phase, the nanosheets are crystalline and form honeycomb lattices. The use of the Zincke reaction has previously been limited to the synthesis of small viologen molecules and conjugated viologen oligomers. Its application here expands the repertoire of tools for the fabrication of covalent organic networks (which are usually prepared by dynamic covalent chemistry) and for the synthesis of viologen-based materials. All three materials-HT, HS, and COGF-serve as efficient adsorbents of iodine due to the presence of the cationic viologen linker and, in the cases of HT and HS, permanent porosity.

Kitaigorodsky revisited: polymorphism and mixed crystals of acridine/phenazine.

Non-stoichiometric molecular mixed crystals have potential as functional materials, the properties of which can be tailored by rationally changing their composition. The guidelines for their preparation were summarized over thirty years ago by Alexander Kitaigorodsky. Here those principles are revised in light of new studies on the acridine/phenazine system, and solvent-assisted grinding is presented as a convenient synthetic procedure to afford a more homogeneous product than traditional solvent-evaporation methods. Finally, the proposed prerequisite of crystal isostructurality/isomorphicity for the pure compounds, which seems to be violated in the present case, is discussed.

Direct Air Capture of CO2 by Physisorbent Materials.

Sequestration of CO2, either from gas mixtures or directly from air (direct air capture, DAC), could mitigate carbon emissions. Here five materials are investigated for their ability to adsorb CO2 directly from air and other gas mixtures. The sorbents studied are benchmark materials that encompass four types of porous material, one chemisorbent, TEPA-SBA-15 (amine-modified mesoporous silica) and four physisorbents: Zeolite 13X (inorganic); HKUST-1 and Mg-MOF-74/Mg-dobdc (metal-organic frameworks, MOFs); SIFSIX-3-Ni, (hybrid ultramicroporous material). Temperature-programmed desorption (TPD) experiments afforded information about the contents of each sorbent under equilibrium conditions and their ease of recycling. Accelerated stability tests addressed projected shelf-life of the five sorbents. The four physisorbents were found to be capable of carbon capture from CO2-rich gas mixtures, but competition and reaction with atmospheric moisture significantly reduced their DAC performance.

Screening, Synthesis, and Characterization of a More Rapidly Dissolving Celecoxib Crystal Form.

The prevalence of poor solubility in active pharmaceutical ingredients (APIs) such as celecoxib (CEL) is a major bottleneck in the pharmaceutical industry, leading to a low concentration gradient, poor passive diffusion, and in vivo failure. This study presents the synthesis and characterization of a new cocrystal of the API CEL. CEL is a nonsteroidal anti-inflammatory drug used for the treatment of osteoarthritis and rheumatoid arthritis. Computational screening was completed for CEL against a large library of generally recognized as safe (GRAS) coformers, based on molecular complementarity and hydrogen bond propensity (HBP). The generated list of 17 coformers with a likelihood for cocrystallization with CEL were experimentally screened using four techniques: liquid-assisted grinding (LAG), solvent evaporation (SE), gas antisolvent crystallization (GAS), and supercritical enhanced atomization (SEA). One new crystalline form was isolated, employing the liquid coformer N-ethylacetamide (NEA). This novel form, celecoxib-di-N-ethylacetamide (CEL·2NEA), was characterized by a variety of different techniques. The crystal structure was determined through single-crystal X-ray diffraction. Both NEA molecules are evolved from the crystal structure at a desolvation temperature of approximately 65 °C. The CEL·2NEA cocrystal exhibited a dissolution rate, with more than a twofold improvement in comparison to as-received CEL after only 15 min.

Ultramicroporous Lonsdaleite Topology MOF with High Propane Uptake and Propane/Methane Selectivity for Propane Capture from Simulated Natural Gas.

Propane (C3H8) is a widely used fuel gas. Metal-organic framework (MOF) physisorbents that are C3H8 selective offer the potential to significantly reduce the energy footprint for capturing C3H8 from natural gas, where C3H8 is typically present as a minor component. Here we report the C3H8 recovery performance of a previously unreported lonsdaleite, lon, topology MOF, a chiral metal-organic material, [Ni(S-IEDC)(bipy)(SCN)]n, CMOM-7. CMOM-7 was prepared from three low-cost precursors: Ni(SCN)2, S-indoline-2-carboxylic acid (S-IDECH), and 4,4'-bipyridine (bipy), and its structure was determined by single crystal X-ray crystallography. Pure gas adsorption isotherms revealed that CMOM-7 exhibited high C3H8 uptake (2.71 mmol g-1) at 0.05 bar, an indication of a higher affinity for C3H8 than both C2H6 and CH4. Dynamic column breakthrough experiments afforded high purity C3H8 capture from a gas mixture comprising C3H8/C2H6/CH4 (v/v/v = 5/10/85). Despite the dilute C3H8 stream, CMOM-7 registered a high dynamic uptake of C3H8 and a breakthrough time difference between C3H8 and C2H6 of 79.5 min g-1, superior to those of previous MOF physisorbents studied under the same flow rate. Analysis of crystallographic data and Grand Canonical Monte Carlo simulations provides insight into the two C3H8 binding sites in CMOM-7, both of which are driven by C-H···π and hydrogen bonding interactions.

Practical and highly selective sulfur ylide-mediated asymmetric epoxidations and aziridinations using a cheap and readily available chiral sulfide: extensive studies to map out scope, limitations, and rationalization of diastereo- and enantioselectivities.

The chiral sulfide, isothiocineole, has been synthesized in one step from elemental sulfur, γ-terpinene, and limonene in 61% yield. A mechanism involving radical intermediates for this reaction is proposed based on experimental evidence. The application of isothiocineole to the asymmetric epoxidation of aldehydes and the aziridination of imines is described. Excellent enantioselectivities and diastereoselectivities have been obtained over a wide range of aromatic, aliphatic, and α,ß-unsaturated aldehydes using simple protocols. In aziridinations, excellent enantioselectivities and good diastereoselectivities were obtained for a wide range of imines. Mechanistic models have been put forward to rationalize the high selectivities observed, which should enable the sulfide to be used with confidence in synthesis. In epoxidations, the degree of reversibility in betaine formation dominates both the diastereoselectivity and the enantioselectivity. Appropriate tuning of reaction conditions based on understanding the reaction mechanism enables high selectivities to be obtained in most cases. In aziridinations, betaine formation is nonreversible with semistabilized ylides and diastereoselectivities are determined in the betaine forming step and are more variable as a result.

Crystal engineering of lattice metrics of perhalometallate salts and MOFs.

The synthesis of the salt 3 and metallo-organic framework (MOF) [{(4,4(')-bipy)CoBr(2)}(n)] 4 by a range of solid state (mechanochemical and thermochemical) and solution methods is reported; they are isostructural with their respective chloride analogues 1 and 2. 3 and 4 can be interconverted by means of HBr elimination and absorption. Single phases of controlled composition and general formula [4,4(')-H(2)bipy][CoBr(4-x)Cl(x)] 5(x) may be prepared from 2 and 4 by solid--gas reactions involving HBr or HCl respectively. Crystalline single phase samples of 5(x) and [{(4,4(')-bipy)CoBr(2-x)Cl(x)}(n)] 6(x) were prepared by solid-state mechanochemical routes, allowing fine control over the composition and unit cell volume of the product. Collectively these methods enable continuous variation of the unit cell dimensions of the salts [4,4(')-H(2)bipy][CoBr(4-x)Cl(x)] (5(x)) and the MOFs [{(4,4(')-bipy)CoBr(2-x)Cl(x)}(n)] (6(x)) by varying the bromide to chloride ratio and establish a means of controlling MOF composition and the lattice metrics, and so the physical and chemical properties that derive from it.

Simultaneous self-assembly of a [2]catenane, a trefoil knot, and a Solomon link from a simple pair of ligands.

A topological triptych: Three molecular links, a [2]catenane, a trefoil knot, and a Solomon link, were obtained in one pot through the self-assembly of two simple ligands in the presence of Zn(II). The approach relied on dynamic covalent chemistry and metal templation.

Solid solution polymorphs afford two highly soluble co-drug forms of tolbutamide and chlorpropamide.

The search for solid solutions of class-two insulin secretagogues, tolbutamide and chlorpropamide, reveals a rare case of monotropic polymorphism for the mixed crystals. At any stoichiometry, two crystal forms are isolated that are kinetically stable at room temperature from a few months to over a year. Dissolution tests certify the solubility advantage of the solid solutions over the pure drugs as well as their physical mixture, suggesting a potential application as a highly soluble co-drug formulation.

New Solid Forms of Griseofulvin: A Solvate and a Relict Polymorph Related to Reported Solvates.

This work presents two new solid forms, a polymorph and a solvate, of the antifungal active pharmaceutical ingredient griseofulvin (GSF). The novel forms were characterized by powder X-ray diffraction, differential scanning calorimetry, and thermogravimetric analysis, and their crystal structures were determined by single-crystal X-ray diffraction. The new polymorphic form (GSF Form VI) was obtained upon drying at room temperature the GSF-acetonitrile solvate. GSF Form VI is a relict structure related to reported solvates of GSF. Thermal stability studies show that Form VI is metastable and monotropically related to the stable GSF Form I. The new GSF-n-butyl acetate solvate was obtained by crystallization from an n-butyl acetate solution. The stoichiometry of the n-butyl acetate solvate is 1:0.5. The solvate loses the solvent from the crystal lattice at a temperature between 363.15 and 374.15 K.

Effect of Extra-Framework Anion Substitution on the Properties of a Chiral Crystalline Sponge.

Chiral metal-organic materials, CMOMs, are of interest as they can offer selective binding sites for chiral guests. Such binding sites can enable CMOMs to serve as chiral crystalline sponges (CCSs) to determine molecular structure and/or purify enantiomers. We recently reported on the chiral recognition properties of a homochiral cationic diamondoid, dia, network {[Ni(S-IDEC)(bipy)(H2O)][NO3]}n (S-IDEC = S-indoline-2-carboxylicate, bipy = 4,4'-bipyridine), CMOM-5[NO3]. The modularity of CMOM-5[NO3] means there are five feasible approaches to fine-tune structures and properties via substitution of one or more of the following components: metal cation (Ni2+); bridging ligand (S-IDEC); linker (bipy); extra-framework anion (NO3-); and terminal ligand (H2O). Herein, we report the effect of anion substitution on the CCS properties of CMOM-5[NO3] by preparing and characterizing {[Ni(S-IDEC)(bipy)(H2O)][BF4]}n, CMOM-5[BF4]. The chiral channels in CMOM-5[BF4] enabled it to function as a CCS for determination of the absolute crystal structures of both enantiomers of three chiral compounds: 1-phenyl-1-butanol (1P1B); methyl mandelate (MM); ethyl mandelate (EM). Chiral resolution experiments revealed CMOM-5[BF4] to be highly selective toward the S-isomers of MM and EM with enantiomeric excess, ee, values of 82.6 and 78.4%, respectively. The ee measured for S-EM surpasses the 64.3% exhibited by [DyNaL(H2O)4] 6H2O and far exceeds that of CMOM-5[NO3] (6.0%). Structural studies of the binding sites in CMOM-5[BF4] provide insight into their high enantioselectivity.

Crystal Engineering of a Chiral Crystalline Sponge That Enables Absolute Structure Determination and Enantiomeric Separation.

Chiral metal-organic materials (CMOMs), can offer molecular binding sites that mimic the enantioselectivity exhibited by biomolecules and are amenable to systematic fine-tuning of structure and properties. Herein, we report that the reaction of Ni(NO3)2, S-indoline-2-carboxylic acid (S-IDECH), and 4,4'-bipyridine (bipy) afforded a homochiral cationic diamondoid, dia, network, [Ni(S-IDEC)(bipy)(H2O)][NO3], CMOM-5. Composed of rod building blocks (RBBs) cross-linked by bipy linkers, the activated form of CMOM-5 adapted its pore structure to bind four guest molecules, 1-phenyl-1-butanol (1P1B), 4-phenyl-2-butanol (4P2B), 1-(4-methoxyphenyl)ethanol (MPE), and methyl mandelate (MM), making it an example of a chiral crystalline sponge (CCS). Chiral resolution experiments revealed enantiomeric excess, ee, values of 36.2-93.5%. The structural adaptability of CMOM-5 enabled eight enantiomer@CMOM-5 crystal structures to be determined. The five ordered crystal structures revealed that host-guest hydrogen-bonding interactions are behind the observed enantioselectivity, three of which represent the first crystal structures determined of the ambient liquids R-4P2B, S-4P2B, and R-MPE.

Solid-vapor sorption of xylenes: prioritized selectivity as a means of separating all three isomers using a single substrate.

A Werner complex is highly selective for o-xylene in a vapor mixture containing all three isomers. However, in the absence of o-xylene, the substrate shows similar selectivity for m-xylene over p-xylene. Kinetic studies show a different trend whereby m-xylene is absorbed most rapidly, implying that thermodynamic factors must be responsible for the selectivity.

Supramolecular Synthon Promiscuity in Phosphoric Acid-Dihydrogen Phosphate Ionic Cocrystals.

Approximately 80% of active pharmaceutical ingredients (APIs) studied as lead candidates in drug development exhibit low aqueous solubility, which typically results in such APIs being poorly absorbed and exhibiting low bioavailability. Salts of ionizable APIs and, more recently, pharmaceutical cocrystals can address low solubility and other relevant physicochemical properties. Pharmaceutical cocrystals are amenable to design through crystal engineering because supramolecular synthons, especially those sustained by hydrogen bonds, can be anticipated through computational modeling or Cambridge Structural Database (CSD) mining. In this contribution, we report a combined experimental and CSD study on a class of cocrystals that, although present in approved drug substances, remains understudied from a crystal engineering perspective: ionic cocrystals composed of dihydrogen phosphate (DHP) salts and phosphoric acid (PA). Ten novel DHP:PA ionic cocrystals were prepared from nine organic bases (4,4'-bipyridine, 5-aminoquinoline, 4,4'-azopyridine, 1,4-diazabicyclo[2.2.2]octane, piperazine, 1,2-bis(4-pyridyl)ethane, 1,2-bis(4-pyridyl)xylene, 1,2-di(4-pyridyl)-1,2-ethanediol, and isoquinoline-5-carboxylic acid) and one anticonvulsant API, lamotrigine. From the resulting crystal structures and a CSD search of previously reported DHP:PA ionic cocrystals, 46 distinct hydrogen bonding motifs (HBMs) have been identified between DHP anions, PA molecules, and, in some cases, water molecules. Our results indicate that although DHP:PA ionic cocrystals are a challenge from a crystal engineering perspective, they are formed reliably and, given that phosphoric acid is a pharmaceutically acceptable coformer, this makes them relevant to pharmaceutical science.

Cortisone and cortisol break hydrogen-bonding rules to make a drug-prodrug solid solution.

Multidrug products enable more effective therapies and simpler administration regimens, provided that a stable formulation is prepared, with the desired composition. In this view, solid solutions have the advantage of combining the stability of a single crystalline phase with the potential of stoichiometry variation of a mixture. Here a drug-prodrug solid solution of cortisone and cortisol (hydrocortisone) is described. Despite the structural differences of the two components, the new phase is obtained both from solution and by supercritical CO2 assisted spray drying. In particular, to enter the solid solution, hydrocortisone must violate Etter's rules for hydrogen bonding. As a result, its dissolution rate is almost doubled.