RESUMEN
Supramolecular host-guest ferroelectrics based on solution processing are highly desirable because they are generally created with intrinsic piezoelectricity/ferroelectricity and do not need further poling. Poly(vinylidene fluoride) (PVDF) in the electric-active beta phase after stretching/annealing still shows no piezoelectric response unless poled. Although many supramolecular host-guest ferroelectrics have been discovered, their piezoelectricity is relatively small. Based on H/F substitution, we reported a supramolecular host-guest compound [(CF3-C6H4-NH3)(18-crown-6)][TFSA] (CF3-C6H4-NH3 = 4-trifluoromethylanilinium, TFSA = bis(trifluoromethanesulfonyl)ammonium) with a remarkable piezoelectric response of 42 pC/N under no poling condition. The introduction of F atoms increases phase transition temperature, polar axes, second harmonic generation (SHG) intensity, and piezoelectric coefficient d33. To our knowledge, such a large piezoelectric performance of [(CF3-C6H4-NH3)(18-crown-6)][TFSA] makes its d33, piezoelectric voltage coefficient g33, and mechanical quality factor Qm the highest among the reported supramolecular host-guest ferroelectric compounds and even larger than the values of PVDF. This work provides inspiration for optimizing piezoelectricity on molecular materials.
RESUMEN
Metal-free perovskites with light weight and eco-friendly processability have received great interest in recent years due to their superior physical features in ferroelectrics, X-ray detection, and optoelectronics. The famous metal-free perovskite ferroelectric MDABCO-NH4-I3 (MDABCO = N-methyl-N'-diazabicyclo[2.2.2]octonium) has been demonstrated to exhibit excellent ferroelectricity comparable to that of inorganic ceramic ferroelectric BaTiO3, such as large spontaneous polarization and high Curie temperature (Ye et al. Science 2018, 361, 151). However, piezoelectricity as a vitally important index is far from enough in the metal-free perovskite family. Here, we report the discovery of large piezoelectric response in a new metal-free three-dimensional perovskite ferroelectric NDABCO-NH4-Br3 (NDABCO = N-amino-N'-diazabicyclo[2.2.2]octonium) by replacing the methyl group of MDABCO with the amino group. Besides the evident ferroelectricity, strikingly, NDABCO-NH4-Br3 shows a large d33 of 63 pC/N more than 4 times that of MDABCO-NH4-I3 (14 pC/N). The d33 value is also strongly supported by the computational study. To the best of our knowledge, such a large d33 value ranks the highest among the documented organic ferroelectric crystals to date and represents a major breakthrough in metal-free perovskite ferroelectrics. Combined with decent mechanical properties, NDABCO-NH4-Br3 is expected to be a competitive candidate for medical, biomechanical, wearable, and body-compatible ferroelectric devices.
RESUMEN
Fullerenes offer versatile functionalities and are promising materials for a widespread range of applications from biomedicine and energy to electronics. Great efforts have been made to manipulate the symmetries of fullerene and its derivatives for studying material properties and novel effects, such as ferroelectricity with polar symmetry; however, no documentary report has been obtained to realize their ferroelectricity. Here, for the first time, we demonstrated clear ferroelectricity in a fullerene adduct formed by C60 and S8. More is different: the combination of the most symmetric molecule C60 with the highest Ih symmetry and molecule S8 with high D4d symmetry resulted in the polar C60S8 adduct with a low crystallographic symmetry of the C2v (mm2) point group at room temperature. The presented C60S8 undergoes polar-to-polar ferroelectric phase transition with the mm2Fm notation, whose ferroelectricity was confirmed by a ferroelectric hysteresis loop and ferroelectric domain switching. This finding opens up a new functionality for fullerenes and sheds light on the exploration of more ferroelectric fullerenes.
RESUMEN
Piezoelectric materials that enable electromechanical conversion have great application value in actuators, transducers, sensors, and energy harvesters. Large piezoelectric (d33) and piezoelectric voltage (g33) coefficients are highly desired and critical to their practical applications. However, obtaining a material with simultaneously large d33 and g33 has long been a huge challenge. Here, we reported a hybrid perovskite ferroelectric [Me3NCH2Cl]CdBrCl2 to mitigate and roughly address this issue by heavy halogen substitution. The introduction of a large-size halide element softens the metal-halide bonds and reduces the polarization switching barrier, resulting in excellent piezoelectric response with a large d33 (â¼440 pC/N), which realizes a significant optimization compared with that of previously reported [Me3NCH2Cl]CdCl3 (You et al. Science2017, 357, 306-309). More strikingly, [Me3NCH2Cl]CdBrCl2 simultaneously shows a giant g33 of 6215 × 10-3 V m/N, far exceeding those of polymers and conventional piezoelectric ceramics. Combined with simple solution preparation, easy processing of thin films, and a high Curie temperature of 373 K, these attributes make [Me3NCH2Cl]CdBrCl2 promising for high-performance piezoelectric sensors in flexible, wearable, and biomechanical devices.
RESUMEN
Organic-inorganic hybrid perovskites (OIHPs) have been emerging as a hot research topic due to their potential applications in energy storage, semiconductors, and electronic devices. Herein, we systematically investigated the synthesis and phase transition behaviors of the enantiomeric OIHPs, (R) and (S)-N,N-dimethyl-3-fluoropyrrolidinium cadmium bromide ([DMFP][CdBr3]), and the hybrid trigonal structure [DMFP]3 (CdBr3)(CdBr4). The enantiomers have a mirror-symmetric structure and enhanced solid-state phase transition points of 417 and 443 K, in contrast to the nonfluorinated parent compound, N,N-dimethyl-pyrrolidinium cadmium bromide ([DMP][CdBr3], 385 K). Moreover, racemic H/F substitution on the pyrrolidinium cations leads to the formation of a trigonal compound, showing above-room-temperature structural phase transition and dominant ferroelasticity. This work discovers chiral enantiomeric OIHPs through H/F substitution, demonstrating a useful chemical synthesis strategy for exploring novel phase transition materials.
RESUMEN
Bistable materials with multiphysical channels, such as optical, electrical, and magnetic properties, have been paid dramatic attention due to their alternativity of the signal status in electronic devices. Herein, three stable supramolecular radicals ([(NH3-TEMPO)(18-crown-6)][XF6] (1, X = P; 2, X = As; 3, X = Sb)) were synthesized and characterized. The former two molecules present ferroelectric phase transitions around 381.7 and 382.7 K, respectively, with bistability in dielectric property and second-harmonic generation (SHG) effect, which are first found in supramolecular radicals. Their ferroelectric transition and bistable properties are generated from a net polar crystal structure owing to the static ordered packing of NH3-TEMPO radical cations in the low-temperature phase (LTP) to a nonpolar structure owing to a distinctive symmetric scissoring motion of NH3-TEMPO radical cations between two 18-crown-6 molecules in the high-temperature phase (HTP). Both of them exhibit paramagnetic properties in HTP and LTP states since no intermolecular spin-spin interaction occurs due to the long distances among the radicals in their crystals. These results make us possible to design bistable optoelectronic radical materials with bistability in magnetic property in the future.
RESUMEN
Thermally triggered spatial symmetry breaking in traditional ferroelectrics has been extensively studied for manipulation of the ferroelectricity. However, photoinduced molecular orbital breaking, which is promising for optical control of ferroelectric polarization, has been rarely explored. Herein, for the first time, we synthesized a homochiral fulgide organic ferroelectric crystal (E)-(R)-3-methyl-3-cyclohexylidene-4-(diphenylmethylene)dihydro-2,5-furandione (1), which exhibits both ferroelectricity and photoisomerization. Significantly, 1 shows a photoinduced reversible change in its molecular orbitals from the 3â π molecular orbitals in the open-ring isomer to 2â π and 1â σ molecular orbitals in the closed-ring isomer, which enables reversible ferroelectric domain switching by optical manipulation. To our knowledge, this is the first report revealing the manipulation of ferroelectric polarization in homochiral ferroelectric crystal by photoinduced breaking of molecular orbitals. This finding sheds light on the exploration of molecular orbital breaking in ferroelectrics for optical manipulation of ferroelectricity.
RESUMEN
Molecular ferroelectrics with large piezoelectric responses have long been sought for their advantages of light weight, mechanical flexibility, and easy preparation, in contrast to the widely used inorganic counterparts. Representatively, a molecular ferroelectric crystal [Me3NCH2Cl]CdCl3 (TMCM-CdCl3) has been found to show a large piezoelectric coefficient d33 of 220 pC/N exceeding that of BaTiO3 (You et al. Science2017, 357, 306-309). However, although the d33 of molecular ferroelectrics has achieved great progress, their electromechanical coupling factor k33, which is essential for various piezoelectric applications, including ultrasonic transducers and actuators, was rarely explored and is far below the level of inorganic ferroelectrics. The major reason for this situation is the great challenge of growing large-size crystals which is a key limiting factor for measuring k33. Here, we grew inch-size crystals of organic-inorganic perovskite ferroelectric TMCM-CdCl3 with a high d33 (383 pC/N) for investigating its piezoelectric responses including the k33 (0.483) by the resonance method. Such high k33 (0.483) is much larger than those of other molecular ferroelectrics and competitive with that of BaTiO3 (0.5). In addition, TMCM-CdCl3 has a low elastic modulus of 13.03 GPa, an order of magnitude lower than that of BaTiO3. This finding sheds light on the exploration of large electromechanical coupling factors in molecular ferroelectrics for potential applications in flexible and portable piezoelectric devices.
RESUMEN
Organosilicons have been used extensively in aerospace, electronics, food, medicine and other fields, due to their low viscosity, hydrophobicity, corrosion resistance, non-toxic, and physiologically inert features. Despite extensive interest, however, organosilicon ferroelectric crystals have never been found. Here, by using the chemical design strategy, we successfully obtained a molecular ferroelectric D-chiro-inositol-SiMe3 with polar P43 symmetry, whose spontaneous polarization can be electrically switchable on thin film. The introduction of organosilicon groups endows the thin films with excellent softness, ductility and flexibility (extremely low hardness of 72.8â MPa and small elastic modulus of 5.04â GPa) that are desirable for biomedical and human-compatible applications. As the first case of organosilicon ferroelectric crystal to date, this work offers a new structural paradigm for molecular ferroelectrics, and highlights their potential for flexible bio-electronic applications.
Asunto(s)
Electrónica , Inositol , Humanos , ElectricidadRESUMEN
Ferroelectric lithography, which can purposefully control and pattern ferroelectric domains in the micro-/nanometer scale, has extensive applications in data memories, field-effect transistors, race-track memory, tunneling barriers, and integrated biochemical sensors. In pursuit of mechanical flexibility and light weight, organic ferroelectric polymers such as poly(vinylidene fluoride) are developed; however, they still suffer from complicated stretching processes of film fabrication and poor degradability. These poor features severely hinder their applications. Here, the ferroelectric lithography on the biocompatible and biodegradable poly(lactic acid) (PLA) thin films at room temperature is demonstrated. The semicrystalline PLA thin film can be easily fabricated through the melt-casting method, and the desired domain structures can be precisely written according to the predefined patterns. Most importantly, the coercive voltage (Vc ) of PLA thin film is relatively low (lower than 30 V) and can be further reduced with the decrease of the film thickness. These intriguing behaviors combined with satisfying biodegradability make PLA thin film a desirable candidate for ferroelectric lithography and enable its future application in the field of bioelectronics and biomedicine. This work sheds light on further exploration of ferroelectric lithography on other polymer ferroelectrics as well as their application as nanostructured devices.
RESUMEN
Transient implantable piezoelectric materials are desirable for biosensing, drug delivery, tissue regeneration, and antimicrobial and tumor therapy. For use in the human body, they must show flexibility, biocompatibility, and biodegradability. These requirements are challenging for conventional inorganic piezoelectric oxides and piezoelectric polymers. We discovered high piezoelectricity in a molecular crystal HOCH2(CF2)3CH2OH [2,2,3,3,4,4-hexafluoropentane-1,5-diol (HFPD)] with a large piezoelectric coefficient d33 of ~138 picocoulombs per newton and piezoelectric voltage constant g33 of ~2450 × 10-3 volt-meters per newton under no poling conditions, which also exhibits good biocompatibility toward biological cells and desirable biodegradation and biosafety in physiological environments. HFPD can be composite with polyvinyl alcohol to form flexible piezoelectric films with a d33 of 34.3 picocoulombs per newton. Our material demonstrates the ability for molecular crystals to have attractive piezoelectric properties and should be of interest for applications in transient implantable electromechanical devices.
Asunto(s)
Materiales Biocompatibles , Compuestos Férricos , Polímeros , Biodegradación Ambiental , Polímeros/química , Polímeros/metabolismo , Alcohol Polivinílico/química , Alcohol Polivinílico/metabolismo , Materiales Biocompatibles/química , Materiales Biocompatibles/metabolismo , Electricidad , Animales , Ratas , Ratas Sprague-Dawley , Compuestos Férricos/química , Compuestos Férricos/metabolismoRESUMEN
Spin-crossover (SCO) ferroelectrics with dual-function switches have attracted great attention for significant magnetoelectric application prospects. However, the multiferroic crystals with SCO features have rarely been reported. Herein, a molecular multiferroic Fe(II) crystalline complex [FeII(C8-F-pbh)2] (1-F, C8-F-pbh = (1Z,N'E)-3-F-4-(octyloxy)-N'-(pyridin-2-ylmethylene)-benzo-hydrazonate) showing the coexistence of ferroelectricity, ferroelasticity, and SCO behavior is presented for the first time. By H/F substitution, the low phase transition temperature (270 K) of the non-fluorinated parent compound is significantly increased to 318 K in 1-F, which exhibits a spatial symmetry breaking 222F2 type ferroelectric phase transition with clear room-temperature ferroelectricity. Besides, 1-F also displays a spin transition between high- and low-spin states, accompanied by the d-orbital breaking within the t2g 4eg 2 and t2g 6eg° configuration change of octahedrally coordinated FeII center. Moreover, the 222F2 type ferroelectric phase transition is also a ferroelastic one, verified by the ferroelectric domains reversal and the evolution of ferroelastic domains. To the knowledge, 1-F is the first multiferroic SCO molecular crystal. This unprecedented finding sheds light on the exploration of molecular multistability materials for future smart devices.
RESUMEN
Ferroelectric materials, traditionally comprising inorganic ceramics and polymers, are commonly used in medical implantable devices. However, their nondegradable nature often necessitates secondary surgeries for removal. In contrast, ferroelectric molecular crystals have the advantages of easy solution processing, lightweight, and good biocompatibility, which are promising candidates for transient (short-term) implantable devices. Despite these benefits, the discovered biodegradable ferroelectric materials remain limited due to the absence of efficient design strategies. Here, inspired by the polar structure of polyvinylidene fluoride (PVDF), a ferroelectric molecular crystal 1H,1H,9H,9H-perfluoro-1,9-nonanediol (PFND), which undergoes a cubic-to-monoclinic ferroelectric plastic phase transition at 339 K, is discovered. This transition is facilitated by a 2D hydrogen bond network formed through O-H···O interactions among the oriented PFND molecules, which is crucial for the manifestation of ferroelectric properties. In this sense, by reducing the number of -CF2- groups from ≈5 000 in PVDF to seven in PFND, it is demonstrated that this ferroelectric compound only needs simple solution processing while maintaining excellent biosafety, biocompatibility, and biodegradability. This work illuminates the path toward the development of new biodegradable ferroelectric molecular crystals, offering promising avenues for biomedical applications.
RESUMEN
Phase transition materials with switchable second-order nonlinear optical (NLO) properties have attracted extensive attention because of their great application potential in photoelectric switches, sensors, and modulators, while metal-free organics with NLO switchability near room temperature remain scarce. Herein, we report a hydrogen-bonded metal-free organic crystal, 2-methylpropan-2-aminium 2,2-dimethylpropanoate (1), exhibiting a room-temperature phase transition and favorable NLO switchability. Through investigations on its thermal anomalies, dielectric properties, and crystal structures, we uncover that 1 holds a near-room-temperature phase transition at 303 K from noncentrosymmetric point group C2v to centrosymmetric one D2h, which is attributed to the order-disorder transformations of both tert-butylamine cations and dimethylpropionic acid anions. Accompanied by symmetry change during the phase transition, 1 exhibits reversible and repeatable NLO "on-off" switchability with a desirable switching contrast ratio of ca. 19 between high and low NLO states. This discovery demonstrates a metal-free organic crystal with NLO switching behavior near room temperature, serving as a promising candidate in smart and ecofriendly photoelectric functional materials and devices.
RESUMEN
Ferroelectric materials are a special type of polar substances, including solids or liquid crystals. However, obtaining a material to be ferroelectric in both its solid crystal (SC) and liquid crystal (LC) phases is a great challenge. Moreover, although cholesteric LCs inherently possess the advantage of high fluidity, their ferroelectricity remains unknown. Here, through the reasonable H/F substitution on the fourth position of the phenyl group of the parent nonferroelectric dihydrocholesteryl benzoate, we designed ferroelectric dihydrocholesteryl 4-fluorobenzoate (4-F-BDC), which shows ferroelectricity in both SC and cholesteric LC phases. The fluorination induces a lower symmetric polar P1 space group and a new solid-to-solid phase transition in 4-F-BDC. Beneficial from fluorination, the SC and cholesteric LC phases of 4-F-BDC show clear ferroelectricity, as confirmed by well-shaped polarization-voltage hysteresis loops. The dual ferroelectricity in both SC and cholesteric LC phases of a single material was rarely found. This work offers a viable case for the exploration of the interplay between ferroelectric SC and LC phases and provides an efficient approach for designing ferroelectrics with dual ferroelectricity and cholesteric ferroelectric liquid crystals.
RESUMEN
Ferroelectricity has been separately found in numerous solid and liquid crystal materials since its first discovery in 1920. However, a single material with biferroelectricity existing in both solid and liquid crystal phases is very rare, and the regulation of biferroelectricity has never been studied. Here, solid-liquid crystal biphasic ferroelectrics, cholestanyl 4-X-benzoate (4X-CB, X = Cl, Br, and I), which exhibits biferroelectricity in both the solid and liquid crystal phases, is presented. It is noted that the ferroelectric liquid crystal phase of 4X-CB is a cholesteric one, distinct from the ordinary chiral smectic ferroelectric liquid crystal phase. Moreover, 4X-CB shows solid-solid and solid-liquid crystal phase transitions, of which the transition temperatures gradually increase from Cl to Br to I substitution. The spontaneous polarization (Ps ) of 4X-CB in both solid and liquid crystal phases can also be regulated by different halogen substitutions, where the 4Br-CB has the optimal Ps because of the larger molecular dipole moment. To the authors' knowledge, 4X-CB is the first ferroelectric with tunable biferroelectricity, which offers a feasible case for the performance optimization of solid-liquid crystal biphasic ferroelectrics.
RESUMEN
Inorganic ferroelectrics have long dominated research and applications, taking advantage of high piezoelectric performance in bulk polycrystalline ceramic forms. Molecular ferroelectrics have attracted growing interest because of their environmental friendliness, easy processing, lightweight, and good biocompatibility, while realizing the considerable piezoelectricity in their bulk polycrystalline forms remains a great challenge. Herein, for the first time, through ring enlargement, a molecular ferroelectric 1-azabicyclo[3.2.1]octonium perrhenate ([3.2.1-abco]ReO4 ) with a large piezoelectric coefficient d33 up to 118 pC/N in the polycrystalline pellet form is designed, which is higher than that of the parent 1-azabicyclo[2.2.1]heptanium perrhenate ([2.2.1-abch]ReO4 , 90 pC/N) and those of most molecular ferroelectrics in polycrystalline or even single crystal forms. The ring enlargement reduces the molecular strain for easier molecular deformation, which contributes to the higher piezoelectric response in [3.2.1-abco]ReO4 . This work opens up a new avenue for exploring high piezoelectric polycrystalline molecular ferroelectrics with great potential in piezoelectric applications.
RESUMEN
As particles carry quantified energy, photon radiation enables orbital transitions of energy levels, leading to changes in the spin state of electrons. The resulting switchable structural bistability may bring a new paradigm for manipulating ferroelectric polarization. However, the studies on molecular orbital breaking in the ferroelectric field remain blank. Here, for the first time, a new mechanism of ferroelectrics-dual breaking of molecular orbitals and spatial symmetry, demonstrated in a photochromic organic crystal with light-induced polarization switching, is formally proposed. By alternating the ultraviolet/visible light irradiation, the states of electron spin and the radial distribution p atomic orbitals experience a change, showing a reversible switch from "shoulder-to-shoulder" form to a "head-to-head" form. This reflects a reversible conversion between π and σ bonds, which induces and couples with the variation of spatial symmetry. The intersection of spatial symmetry breaking and molecular orbital breaking in ferroelectrics present in this work will be more conducive to data encryption and anticounterfeiting.