RESUMEN
Developing new electrode materials with good temperature-dependent electrochemical performance has become a great issue for the deployment of hybrid supercapacitors with wide temperature tolerance. In this work, a series of Ta-substituted SrCo1-x Tax O3-δ (x=0.05, 0.10, 0.15, 0.20) perovskites have been studied as positive electrodes for hybrid supercapacitors in terms of their structures, elemental valence states and electrochemical performances. Incorporating Ta into SrCoO3-δ perovskite not only stabilizes the crystallite structure but also notably improves electrochemical activities. The SrCo0.95 Ta0.05 O3-δ @CC delivers the highest specific capacity (Qsp ) of 227.91â C g-1 at 1â A g-1 , which is attributed to the highest oxygen vacancy content and the fastest oxygen diffusion kinetics. The hybrid supercapacitor SrCo0.95 Ta0.05 O3-δ @CC//AC@CC exhibits a high energy density of 22.82â Wh kg-1 @775.09â W kg-1 and a stable long-term cycle life (5000 cycles) with 90.7 % capacity retention. As temperature increases from 25 to 85 °C, the capacitance properties are improved at elevated temperatures for both electrode and device due to the increased electrolyte conductivity. The outstanding electrochemical results present that SrCo1-x Tax O3-δ perovskite holds good prospects for hybrid supercapacitors with wide temperature tolerance.
RESUMEN
Developing high-performance electrodes for flexible antifreezing energy storage devices has been a significant challenge with the increasing demand for portable components. In this work, Cr-substituted SrCoO3-δ perovskites were first proposed as potential low-temperature supercapacitor electrode materials. The high-valence Cr6+ ([Ne]3s23p6) substitution favors a high-spin state of Co ions with enhanced electronic repulsion effect, ultimately forming a stable cubic structure with high conductivity. Accordingly, the modification strategies of SrCoO3 through the p6 configuration cation substitution have been improved. As a result, the asymmetric SrCo0.95Cr0.05O3-δ@CC//PPy@CC device exhibited a high energy density of 44.90 Wh kg-1 at 902.01 W kg-1 and maintained a 95.8% specific capacitance after 10,000 cycles, demonstrating an ultralong cyclic stability. The dramatically improved electrochemical performance was attributed to the stabilized crystal structure, increased oxygen vacancy, and accelerated oxygen diffusion rate. Furthermore, a quasi-solid-state supercapacitor with ethylene glycol (EG)-modified KOH/PVA organohydrogel electrolyte was developed through an advance in situ-integrated strategy. After bending at 180° for 1000 cycles, only a 9.7% capacity decay was observed. Even under -40 °C, the supercapacitor has a large energy density of 46.94 µWh cm-2. The present work represents the initial investigation into utilizing perovskite materials for antifreezing energy storage device, thereby confirming their potential application as low-temperature electronic components.
RESUMEN
A series of crystalline/ionic complexed block copolymers (BCPs) with various compositions have been prepared by sequential reactions. The BCPs with different hydrophilic fractions can self-assemble into various morphologies, such as spindlelike, rodlike, and spherical micelles with different crystallinity of the core. Bis(2-ethylhexyl) sulfosuccinate sodium salt (AOT) is added as a surfactant to induce the morphological transition of BCPs in aqueous media. The introduced AOT can be tightly bound to the cationic units, and a water-insoluble unit in the corona forms, leading to a reduced tethering density. Consequently, morphological variety changing from rods to platelets to fibril to dendrite-like micelles can be observed.
RESUMEN
The defective structure and high oxygen vacancy concentration of SrFeO3-δ perovskite enable fast ion-electron transport, but its low conductivity still hinders the high electrochemical performance. Herein, to enhance the conductivity of SrFeO3-δ-based electrodes, polypyrrole-modified SrFeO3-δ perovskite on carbon cloth (PPy@SFO@CC) has been successfully fabricated by electrodeposition of polypyrrole (PPy) on the surface of SFO@CC. The optimal PPy700@SFO@CC electrode exhibits a specific capacitance of 421 F g-1 at 1 A g-1. It was found that the outside PPy layer not only accelerates the electron transport and ion diffusion but also creates more oxygen vacancies in SrFeO3-δ, enhancing the charge storage performance significantly. Moreover, the NiCo2O4@CC//PPy700@SFO@CC device maintains a specific capacitance of 63.6% after 3000 cycles, which is ascribed to the weak adhesion forces between the active materials and carbon cloth. Finally, the all-solid-state flexible supercapacitor NiCo2O4@CC//PPy700@SFO@CC is constructed with PVA-KOH as the solid electrolyte, delivering an energy density of 16.9 W h kg-1 at a power density of 984 W kg-1. The flexible supercapacitor retains 69% of its specific capacitance after 1000 bending and folding times, demonstrating a certain degree of foldability. The present study opens new avenues for perovskite oxide-based flexible all-solid-state supercapacitors.
RESUMEN
Herein, a dual-responsive insulin delivery device by integrating glucose- and H2O2-responsive polymeric vesicles (PVs) with transcutaneous microneedles (MNs) has been designed. This novel microneedle delivery device achieves a goal of fast response, excellent biocompatibility, and painless administration. The PVs are self-assembled from a triblock copolymer including poly(ethylene glycol), poly(phenylboronic acid) (glucose-sensitive block), and poly(phenylboronic acid pinacol ester) (H2O2-sensitive block). After loading with insulin and glucose oxidase (GO x), the drug-loaded PVs display a basal insulin release as well as a promoted insulin release in response to hyperglycemic states. The insulin release rate responds quickly to elevated glucose and can be further promoted by the incorporated GO x, which will generate the H2O2 at high glucose levels and further break the chemical links of phenylboronic acid pinacol ester group. Finally, the transdermal delivery of insulin to the diabetic rats ((insulin + GO x)-loaded MNs) presents an effective hypoglycemic effect compared to that of subcutaneous injection or only insulin-loaded MNs, which indicates the as-prepared MNs insulin delivery system could be of great importance for the applications in the therapy of diabetes.