Fibronectin matrix regulates activation of RHO and CDC42 GTPases and cell cycle progression.

Adherent cells assemble fibronectin into a fibrillar matrix on their apical surface. The fibril formation is initiated by fibronectin binding to the integrins alpha5 beta1 and alphav beta3, and is completed by a process that includes fibronectin self-assembly. We found that a 76- amino acid fragment of fibronectin (III1-C) that forms one of the self-assembly sites caused disassembly of preformed fibronectin matrix without affecting cell adhesion. Treating attached fibroblasts or endothelial cells with III1-C inhibited cell migration and proliferation. Rho-dependent stress fiber formation and Rho-dependent focal contact protein phosphorylation were also inhibited, whereas Cdc42 was activated, leading to actin polymerization into filopodia. ACK (activated Cdc42-binding kinase) and p38 MAPK (mitogen-activated protein kinase), two downstream effectors of Cdc42, were activated, whereas PAK (p21-activated kinase) and JNK/SAPK (c-Jun NH2-terminal kinase/ stress-activated protein kinase) were inhibited. III1-C treatment also modulated activation of JNK and ERK (extracellular signal-regulated kinases) in response to growth factors, and reduced the activity of the cyclin E-cdk2 complex. These results indicate that the absence of fibronectin matrix causes activation of Cdc42, and that fibronectin matrix is required for Rho activation and cell cycle progression.

Extracellular signal-regulated kinase and c-Jun NH2-terminal kinase activation by mechanical stretch is integrin-dependent and matrix-specific in rat cardiac fibroblasts.

Integrins, which connect the cytoskeleton to the extracellular matrix and mediate a variety of signaling cascades, may transduce mechanical stimuli into biochemical signals. We studied integrin- and matrix-dependent activation of extracellular signal-regulated kinase (ERK2), c-Jun NH2-terminal kinase (JNK1), and p38 in response to 4% static biaxial stretch in rat cardiac fibroblasts. ERK2 and JNK1, but not p38, were rapidly activated by stretch when the fibroblasts were allowed to synthesize their own matrices. When the cells were limited to specific matrix substrates, ERK2 and JNK1 were differentially activated: ERK2 was only activated when the cells were plated on fibronectin, while JNK1 was activated when the cells were plated on fibronectin, vitronectin, or laminin. Plating cells on collagen before stretching did not activate either kinase. Adhesion to all matrices was integrin-dependent because it could be blocked by inhibitors of specific integrins. ERK2 activation could be blocked with a combination of anti-alpha4 and -alpha5 antibodies and an arginine-glycine-aspartic acid (RGD) peptide, while the antibodies or peptide used separately failed to block ERK2 activation. This result suggests that at least two integrins, alpha4beta1 and an RGD-directed, non-alpha5beta1 integrin, activate ERK2 in response to mechanical stimulation. Activation of JNK1 could not be blocked with the inhibitors, suggesting that an RGD-independent integrin or integrins other than alpha4beta1 can activate JNK1 in cells adherent to fibronectin. This study demonstrates that integrins act as mechanotransducers, providing insight into potential mechanisms for in vivo responses to mechanical stimuli.

Myocardial remodeling in hypertensive Ren-2 transgenic rats.

Rats harboring the mouse Ren-2 transgene develop hypertension despite low levels of plasma renin. We determined the extent of left ventricular remodeling present in Ren-2 rats at 16 weeks of age by measuring blood pressure, ratio of heart weight to body weight, left ventricular wall thickness, passive (diastolic) left ventricular compliance, and left ventricular collagen content using hydroxyproline and collagen area fraction. Changes in perivascular fibronectin and collagen type I and III were examined with immunohistochemistry. Blood pressure values at time of death were 244 +/- 15 mm Hg for Ren-2 rats (mean +/- SD, n = 5). Ratios of heart weight to body weight (grams per kilogram) for Ren-2 animals were 4.1 +/- 0.2 versus 3.1 +/- 0.1 for controls (n = 6, P < .001). Wall thickness values for control animals were 2.6 +/- 0.1 versus 4.1 +/- 0.4 mm for Ren-2 animals (P < .001). Left ventricular Ren-2 hydroxyproline measurements were significantly decreased (3.4 +/- 0.2 versus 4.7 +/- 0.9 mg/g dry wt for controls). Significant decreases of approximately 30% were also observed in collagen area fraction in Ren-2 rats. Immunohistochemical and picrosirius red staining indicated increased amounts of perivascular fibrosis in all Ren-2 animals (when compared with controls) with enhanced levels of perivascular fibronectin and type I and type III collagen proteins. Left ventricular compliance measurements indicated a decrease in left ventricular volume for all left ventricular pressures (P = .07).(ABSTRACT TRUNCATED AT 250 WORDS)

Immobilization of the knee joint alters the mechanical and ultrastructural properties of the rabbit anterior cruciate ligament.

The effects of immobilization of the knee joint on the mechanical and ultrastructural properties of the anterior cruciate ligament have not been well documented. Our goal was to determine these effects in a rabbit model and to assess the effect of knee flexion angle during immobilization. The knee joint was immobilized in either 170 degrees or 105 degrees of flexion, and new methodologies were utilized to determine the mechanical properties of the anterior cruciate ligament. In specimens from knees that had been immobilized, the cross-sectional area of the ligament was 74% of the control value. The stress-strain curve was altered slightly, and the strain at failure increased 32-40%. The modulus and stress at failure did not decrease significantly. There was no significant difference between the mechanical properties of the knees immobilized at 170 degrees and 105 degrees of flexion. Histological and ultrastructural evaluation demonstrated changes in the shape and intracellular make-up of the fibroblasts from the ligament after immobilization. This cellular response may account for the alterations in the mechanical properties of the anterior cruciate ligament.

Measurement of strain and analysis of stress in resting rat left ventricular myocardium.

A technique has been developed for measuring two-dimensional strains in the left ventricle of the isolated arrested rat heart subjected to passive ventricular loading. The pressure-volume relationship was found in eight hearts during inflation of a left ventricular balloon. With the zero-pressure state as reference, in-plane strain components were determined using a triangle of ultrasonic dimension transducers (0.6-0.8 mm diameter) placed 3-6 mm apart in the midwall of the left ventricle. Mean circumferential (fiber) strain was larger than longitudinal (cross-fiber) strain (0.108 +/- 0.045, 0.055 +/- 0.045, respectively, at 11 mmHg), and shear strain (-0.048 +/- 0.029) was negative, consistent with left-handed torsion. The in-plane angle of greatest stretch was uniform with inflation (range = -26.5 degrees to -34.5 degrees). The equatorial region of the left ventricle was modeled with finite element analysis of a transversely isotropic thick-walled cylindrical shell subjected to internal loading and axial forces. The material parameters of an exponential strain energy function were optimized so that the least-squares difference between the predicted and the measured midwall strains was minimized. Material properties, stress and strain in the rat heart were compared to values predicted for the dog. In both species the tissue was stiffer in the fiber direction than in the cross-fiber direction. The ratio of fiber to cross-fiber stiffness was lower in the rat (2.50) than in the dog (5.24) at low loads and approximately equal at higher loads (1.63 and 1.39, respectively). The computational and experimental analyses showed that the larger shear strain and more nonuniform in-plane extension in the rat may be an indication of significantly different anisotropic material properties in these two species, and implies differences in the collagen ultrastructure.

A comparative evaluation of the mechanical properties of the rabbit medial collateral and anterior cruciate ligaments.

The biomechanical properties of the medial collateral and anterior cruciate ligaments from 30 New Zealand White rabbits were measured. Because of its complex geometry, the ACL was divided into two portions (medial and lateral) to provide uniform loading. This allowed an examination of the intra-ligamentous properties. A laser micrometer system was used to measure the cross-sectional area for tensile stress and a video dimension analyzer was used to measure the strain. The mechanical properties (stress-strain curves) of the MCL and ACL were different, with the modulus (determined between 4 and 7% strain) in the MCL (1120 +/- 153 MPa) more than twice that of either portion of the ACL (516 +/- 64 and 516 +/- 69 MPa for the medial and lateral portions, respectively). This higher modulus correlated with the more uniform and dense appearance of the collagen fibrils examined with scanning electron microscopy (SEM).

Thyroid hormone beta receptor activation has additive cholesterol lowering activity in combination with atorvastatin in rabbits, dogs and monkeys.

BACKGROUND AND PURPOSE: Thyroid hormone receptor (TR) agonists are in clinical trials for the treatment of hypercholesterolaemia. As statins are the standard of clinical care, any new therapies must have adjunctive activity, when given in combination with statins. As already known for the statins, the cholesterol lowering effect of TR activation involves increased expression of the low-density lipoprotein receptor. Using animal models, we tested whether TR activation would have additive cholesterol lowering activity in the presence of effective doses of a statin. EXPERIMENTAL APPROACH: We evaluated the activity of a liver-targeted prodrug, MB07811, of a novel TH receptor beta agonist, MB07344, as monotherapy and in combination with atorvastatin in rabbits, dogs and monkeys. KEY RESULTS: In rabbits, MB07344 (i.v.) decreased total plasma cholesterol (TPC) comparable to that achieved with a maximally effective dose of atorvastatin (p.o.). The addition of MB07344 to atorvastatin resulted in a further decrease in TPC. Similarly, the addition of MB07811 (p.o.) to atorvastatin treatment decreased TPC beyond the level achieved with either agent as monotherapy. In dogs and monkeys, atorvastatin and MB07811 were administered as monotherapy or in combination. Consistent with the rabbit studies, the combination treatment caused a greater decrease in TPC than either MB07811 or atorvastatin administered as monotherapy. CONCLUSIONS AND IMPLICATIONS: We conclude that the effects of MB07811 and atorvastatin in lowering cholesterol are additive in animals. These results would encourage and support the demonstration of similarly improved efficacy of combination versus monotherapy with such agents in the clinic.

Microstructural model of perimysial collagen fibers for resting myocardial mechanics during ventricular filling.

To study the structural contribution of perimysial collagen fibers to the passive mechanics of ventricular myocardium, we modeled the coiled fibers as helical springs using elastica theory to represent the fibers as initially curved, inextensible rods that could bend and twist. The extensional behavior in the physiological range of left ventricular (LV) pressures was dependent on structural parameters that were estimated histologically for rat and dog: collagen fiber diameter, coil period, collagen fiber tortuosity (fiber length in 2 dimensions/midline length), and number density (Nd) of collagen fibers per cross-sectional area of tissue. The difference in each geometric parameter was not great (27% maximal difference for Nd). However, the combined effect of all parameters accounted for a 102% difference in tissue stiffness. The only other model parameter was the Young's modulus (E) for bending of collagen, which was calculated from a linear regression of stress and strain scaled according to the geometric parameters. Despite an approximately fivefold difference in tissue stiffness, the resulting E was only 18.5% different (135 vs. 160 MPa for rat and dog, respectively). With the mean values from each species, the model was able to predict the stress-strain behavior of both rat and dog myocardium in the physiological range of LV pressures, suggesting that the perimysial collagen fibers may be the most important contributors to passive stiffness of the myocardium in the direction of the muscle fibers. It also appears that these large collagen fibers are not stretching to generate stress in the normal range of ventricular pressures, but rather stress gradually increases as collagen fibers straighten through bending and twisting. Finally, to understand the importance of differences in collagen architecture, one should measure the detailed collagen structure, not simply collagen density.

Left ventricular perimysial collagen fibers uncoil rather than stretch during diastolic filling.

The collagen fibers in the myocardium are initially wavy, suggesting that they may not be directly stretched for a portion of diastolic filling. To test whether the fibers gradually straighten and at what left ventricular (LV) pressure they become straight, 24 isolated, arrested rat hearts were fixed at physiologic diastolic LV pressures and changes in collagen structure were examined. As LV pressure increased, mean ( +/- SE) sarcomere length increased (1.80 +/- 0.02 to 1.88 +/- 0.02 from 0 mmHg to 26.3 +/- 4.1 mmHg) while the tortuosity of the perimysial fibers (fiber length/midline length) decreased (1.088 +/- 0.014 to 1.031 +/- 0.006 from 0 mmHg to 26.3 +/- 4.1 mmHg). Transmural variations in collagen structure paralleled the trends in sarcomere length (epicardial regions had longer sarcomeres and straighter collagen fibers than endocardial regions). These results indicate that there is a tight coupling between perimysial collagen fibers and myocytes, consistent with the nonlinear pressure-volume and pressure-sarcomere length relationships.

Contribution of collagen matrix to passive left ventricular mechanics in isolated rat hearts.

Although it makes up only 2-6% of left ventricular dry weight, collagen is thought to be the major structural protein determining passive ventricular stiffness. However, the relationship between structure of the extracellular matrix and passive mechanics is not understood. Hence, to deplete the collagen matrix, 16 rat hearts were perfused with bacterial collagenase for 60 min. Quantitative morphology using picrosirius red revealed a 36% decrease in collagen area fraction predominantly in the medium-sized fibers. Scanning electron microscopy revealed damage to the endomysial struts. Passive pressure-volume curves showed increases in left ventricular volume at all pressures (from 0.203 +/- 0.061 to 0.265 +/- 0.061 ml at 5 mmHg, P < 0.0001). Strain during loading, calculated from lengths obtained from a triplet of piezoelectric crystals, was unchanged with collagen depletion. However, remodeling strain computed from the collagenase-treated state referred to the Krebs solution-treated state at the same ventricular pressure showed both circumferential (0.145 +/- 0.166 to 0.170 +/- 0.158) and longitudinal (0.070 +/- 0.120 to 0.068 +/- 0.069) stretching. Sarcomere lengths increased at all depths (5.2% at midwall). Thus alterations in the extracellular matrix lead to increased ventricular volume and sarcomere lengths without altering ventricular compliance.

An equibiaxial strain system for cultured cells.

We developed a device that applies homogeneous equibiaxial strains of 0-10% to a cell culture substrate and quantitatively verified transmission of substrate deformation to cultured cardiac cells. Clamped elastic membranes in both single-well and multiwell versions of the device are uniformly stretched by indentation with a plastic ring, resulting in strain that is directly proportional to the pitch-to-radius ratio. Two-dimensional deformations were measured by tracking fluorescent microspheres attached to the substrate and to cultured adult rat cardiac fibroblasts. For nominal stretches up to 18%, strains along circumferential and radial axes were equal in magnitude and homogeneously distributed with negligible shear. For 5% stretch, circumferential and radial strains in the substrate were 0.046 +/- 0.005 and 0.048 +/- 0.004 [not significant (NS)], respectively, and shear strain was 0.001 +/- 0.003 (NS). Calibration of both single-well and multiwell versions permits strain selection by device rotation. The reproducible application and quantification of homogeneous equibiaxial strain in cultured cells provides a quantitative approach for correlating mechanical stimuli to cellular transduction mechanisms.