RESUMEN
OBJECTIVES: To determine the effect of arthroscopic capsular shift surgery on pain and functional impairment for people with atraumatic shoulder (glenohumeral) joint instability. METHODS: We conducted a randomised, placebo-controlled clinical trial in a specialist secondary care facility. Patients aged 18 years and over who reported insecurity (apprehension) in their shoulder joint and had evidence of capsulolabral damage on arthroscopic examination were included. Patients were excluded if their shoulder apprehension symptoms were precipitated by a high velocity shoulder injury, they had bony or neural damage, a rotator cuff or labral tear, or previous surgery on the symptomatic shoulder. Sixty-eight participants were randomised and received diagnostic arthroscopy, followed by arthroscopic capsular shift or diagnostic arthroscopy alone. All participants received the same postoperative clinical care. The primary outcome was pain and functional impairment measured with the Western Ontario Shoulder Instability Index. The prespecified minimum clinically important effect was a reduction in pain and disability of 10.4 points. RESULTS: Mean reductions in pain and functional impairment for both groups were similar. Compared with diagnostic arthroscopy, arthroscopic capsular shift increased pain and functional impairment by means of 5 points (95% CI -6 to 16 points) at 6 months, 1 point (95% CI -11 to 13 points) at 12 months and 2 points (95% CI -12 to 17 points) at 24 months. CONCLUSIONS: Compared with diagnostic arthroscopy alone, arthroscopic capsular shift confers, at best, only minimal clinically important benefit in the medium term. TRIAL REGISTRATION NUMBER: NCT01751490.
Asunto(s)
Inestabilidad de la Articulación , Articulación del Hombro , Humanos , Adolescente , Adulto , Artroscopía , Inestabilidad de la Articulación/cirugía , Articulación del Hombro/cirugía , Hombro , Dolor de Hombro/cirugía , Resultado del TratamientoRESUMEN
BACKGROUND: Accurate prosthesis placement in arthroplasty is an important factor in the long-term success of these interventions. Many types of guidance technology have been described to date often suffering from high costs, complex theater integration, time inefficiency, and problems with day-to-day usability. We present a novel, intraoperative robotics platform, capable of rapid, real-time manufacture of low-cost patient-specific guides while overcoming many of the issues with existing approaches. METHODS: A prototype robotics platform was assessed in a 24-specimen cadaveric trial during sequential simulated shoulder arthroplasty procedures. The platform consisted of a tableside robot with sterile drapes and sterile disposable components. The robot itself comprised a 3D optical scanner, a 3-axis sterile robotic drill, and a 2-axis receptacle into which the disposable consumables were inserted. The consumable was composed of a region of rapidly setting moldable material and a clip allowing it to be reversibly attached to the robot. Computed tomographic (CT) imaging was obtained for all cadaveric specimens, and a surgical plan was created focusing on glenoid component position-specifically, guidewire position to allow for accurate glenoid preparation before implant insertion. Intraoperatively, for every specimen, the relevant osseous anatomy was exposed and humeral and glenoid preparation undertaken in the usual manner. The sterile disposable was used to create a mold of the joint surface. Once set, the mold was inserted into the robot and an optical scan of the surface was undertaken followed by automatic surface registration with the CT data and surgical plan. An automatic guide hole was subsequently drilled into the molded blank, which was removed from the robot and placed back into the patient, with the melded surface ensuring exact replacement. The guidewire was then driven through the guide hole in accordance with the preoperative plan. RESULTS: The novel robotic platform achieved average angular accuracies of 1.9° (standard deviation [SD] 1.3) version and 1.2° (SD 0.7) inclination with positional accuracy of 1.1 mm (SD 0.7) compared to a preoperative plan. DISCUSSION: We have described a novel robotics platform that is able to reliably produce patient-specific intraoperative guides to allow for accurate guidewire placement. Guidance is provided using a portable intraoperative device. The results suggest achieved accuracy levels may be equivalent to those seen in other existing guidance technologies; however, eventual in vivo trials and analysis is required. This technology has potential transferability to improve accuracy in other areas of arthroplasty.
Asunto(s)
Artroplastía de Reemplazo de Hombro , Robótica , Articulación del Hombro , Cirugía Asistida por Computador , Artroplastia , Artroplastía de Reemplazo de Hombro/métodos , Cadáver , Humanos , Imagenología Tridimensional/métodos , Articulación del Hombro/diagnóstico por imagen , Articulación del Hombro/cirugía , Cirugía Asistida por Computador/métodosRESUMEN
BACKGROUND: Deep prosthetic infection is a potentially devastating complication after total elbow arthroplasty, with an incidence of up to 12%. This study examined the demographics, microbiologic profile, and outcomes of infected total elbow arthroplasty treated with 2-stage revision in a tertiary referral unit. METHODS: We identified 19 consecutive patients (mean age, 65 years) undergoing revision arthroplasty for deep prosthetic infection. All patients underwent a first-stage procedure with removal of implants, débridement, and insertion of an antibiotic-loaded cement spacer, followed by at least 6 weeks of intravenous antibiotics. Fourteen patients required a second-stage revision. RESULTS: Five patients did not undergo a second-stage procedure because of patient choice (n = 2), medical or surgical risk factors (n = 2), and death from an unrelated cause (n = 1). Of the 19 patients undergoing a first-stage procedure, 16 (84%) remained infection free, and 11 of the 14 patients (79%) undergoing reimplantation of an elbow prosthesis remained infection free. Six patients required further surgery (3 for recurrent infection, 3 for noninfective indications). The commonest infecting organism was Staphylococcus aureus (47%). A degree of postoperative ulnar nerve dysfunction occurred in 37% of patients, but all resolved fully without further treatment. CONCLUSIONS: Management of prosthetic joint infection using 2-stage revision can result in high rates of eradication, although rates of reoperation and transient ulnar nerve dysfunction are high.
Asunto(s)
Antibacterianos/uso terapéutico , Artroplastia de Reemplazo de Codo/efectos adversos , Desbridamiento/métodos , Manejo de la Enfermedad , Prótesis de Codo/microbiología , Infecciones Relacionadas con Prótesis/terapia , Infecciones Estafilocócicas/terapia , Adulto , Anciano , Anciano de 80 o más Años , Femenino , Humanos , Masculino , Persona de Mediana Edad , Infecciones Relacionadas con Prótesis/microbiología , Reoperación , Infecciones Estafilocócicas/microbiología , Staphylococcus aureus/aislamiento & purificación , Resultado del TratamientoRESUMEN
BACKGROUND: The purpose of this study was to analyze the pathomorphology of proximal humeral fractures to determine relevant and reliable parameters for fracture classification. METHODS: A total of 100 consecutive acute proximal humeral fractures in adult patients were analyzed by 2 non-independent observers from a single shoulder department using a standardized protocol based on biplane radiographs and 3-dimensional computed tomography scans. A fracture classification system based on the most reliable key features of the pathomorphologic analysis was created, and its reliability was tested by 6 independent shoulder experts analyzing another 100 consecutive proximal humeral fractures. RESULTS: The head position in relation to the shaft (varus, valgus, sagittal deformity) and the presence of tuberosity fractures showed a higher interobserver reliability (κ > 0.8) than measurements for medial hinge, shaft, and tuberosity displacement, metaphyseal extension, fracture impaction, as well as head-split component identification (κ < 0.7). These findings were used to classify nondisplaced proximal humeral fractures as type 1, fractures with normal coronal head position but sagittal deformity as type 2, valgus fractures as type 3, varus fractures as type 4, and fracture dislocations as type 5. The fracture type was further combined with the fractured main fragments (G for greater tuberosity, L for lesser). Interobserver and intraobserver reliability analysis for the fracture classification revealed a κ value (95% confidence interval) of 0.700 (0.631-0.767) and 0.917 (0.879-0.943), respectively. CONCLUSION: The new classification system with emphasis on the qualitative aspects of proximal humeral fractures showed high reliability when based on a standardized imaging protocol including computed tomography scans.
Asunto(s)
Fracturas del Hombro/clasificación , Fracturas del Hombro/diagnóstico por imagen , Tomografía Computarizada por Rayos X , Adulto , Anciano , Anciano de 80 o más Años , Femenino , Humanos , Imagenología Tridimensional , Masculino , Persona de Mediana Edad , Variaciones Dependientes del Observador , Reproducibilidad de los Resultados , Adulto JovenRESUMEN
Background: Fractures of the distal humerus are a common fragility fracture in older adults. The purpose of this study was to systematically review the literature to produce pooled estimates of the outcomes of treatment using total elbow arthroplasty (TEA), open reduction and locking plate fixation (ORIF), hemiarthroplasty or with conservative management. Methods: A systematic review of PUBMED and EMBASE databases was conducted for studies reporting outcomes of intra-articular fractures in older adults. Data extracted included patient-reported outcome measures as well as clinical outcomes including ROM, adverse events and all-cause reoperation rates. Results: Forty-eight studies met the inclusion criteria and included 1838 acute, intra-articular distal humeral fractures. There was no clinically important difference in patient-reported pain and function measured on the Mayo Elbow Performance Score (TEA = 89.3 (SD 20.0), Hemi = 88.4 (SD 10.6), internal fixation = 85.0 (SD 14.7), non-operative = 85.1 (SD 11.0)). Discussion: Each of the treatment modalities studies resulted in a reasonable level of elbow function. The included studies were largely non-comparative and at considerable risk of bias. As elbow replacement surgery becomes centralised in the UK, there is a real need for high-quality comparative research studies to inform practice.
RESUMEN
BACKGROUND: Clinical coders are dependent on clear data regarding diagnoses and procedures to generate an accurate representation of clinical activity and ensure appropriate remuneration is received. The accuracy of this process may potentially be improved by collaboration with the surgical team. METHODS: Between November 2017 and November 2019, 19 meetings took place between the Senior Clinical Fellow of our tertiary Shoulder & Elbow Unit and the coding validation lead of our Trust. At each meeting, the Clinical Fellow assessed the operative note of cases in which uncertainty existed as to the most suitable clinical codes to apply and selected the codes which most accurately represented the operative intervention performed. RESULTS: Over a 24-month period, clinical coding was reviewed in 153 cases (range 3-14 per meeting, mean 8). Following review, the clinical coding was amended in 102 (67%) of these cases. A total of £115,160 additional income was generated as a result of this process (range £1677-£15,796 per meeting, mean £6061). Only 6 out of 28 (21%) cases initially coded as arthroscopic sub-acromial decompressions were correctly coded as such. DISCUSSION: Surgeon input into clinical coding greatly improves data quality and increases remuneration received for operative interventions performed.
RESUMEN
Correct understanding of the geometry of the glenoid (the socket of the shoulder joint) is key to successful planning of shoulder replacement surgery. This surgery typically involves placing an implant in the shoulder joint to restore joint function. The most relevant geometry is the glenoid version, which is the angular orientation of the glenoid surface relative to the long axis of the scapula in the axial plane. However, measuring the glenoid version is not straightforward and there are multiple measurement methods in the literature and used in commercial planning software. In this paper we introduce SciKit-SurgeryGlenoid, an open source toolkit for the measurement of glenoid version. SciKit-SurgeryGlenoid contains implementations of the 4 most frequently used glenoid version measurement algorithms enabling easy and unbiased comparison of the different techniques. We present the results of using the software on 10 sets of pre-operative CT scans taken from patients who have subsequently undergone shoulder replacement surgery. We further compare these results with those obtained from a commercial implant planning software. SciKit-SurgeryGlenoid currently requires manual segmentation of the relevant anatomical features for each method. Future work will look at automating the segmentation process to build an automatic and repeatable pipeline from CT or radiograph to quantitative glenoid version measurement.
RESUMEN
OBJECTIVE: To undertake a UK-based James Lind Alliance (JLA) Priority Setting Partnership for elbow conditions and be representative of the views of patients, carers and healthcare professionals (HCPs). SETTING: This was a national collaborative study organised through the British Elbow and Shoulder Society. PARTICIPANTS: Adult patients, carers and HCPs who have managed or experienced elbow conditions, their carers and HCPs in the UK involved in managing of elbow conditions. METHODS: The rigorous JLA priority setting methodology was followed. Electronic and paper scoping surveys were distributed to identify potential research priority questions (RPQs). Initial responses were reviewed and a literature search was performed to cross-check categorised questions. Those questions already sufficiently answered were excluded and the remaining questions were ranked in a second survey according to priority for future elbow conditions research. Using the JLA methodology, responses from HCP and patients were combined to create a list of the top 18 questions. These were further reviewed in a dedicated multistakeholder workshop where the top 10 RPQs were agreed by consensus. RESULTS: The process was completed over 24 months. The initial survey resulted in 467 questions from 165 respondents (73% HCPs and 27% patients/carers). These questions were reviewed and combined into 46 summary topics comprising: tendinopathy, distal biceps pathology, arthritis, stiffness, trauma, arthroplasty and cubital tunnel syndrome. The second (interim prioritisation) survey had 250 respondents (72% HCP and 28% patients/carers). The top 18 ranked questions from this survey were taken to the final workshop where a consensus was reached on the top 10 RPQs. CONCLUSIONS: The top 10 RPQs highlight areas of importance that currently lack sufficient evidence to guide diagnosis, treatment and rehabilitation of elbow conditions. This collaborative process will guide researchers and funders regarding the topics that should receive most future attention and benefit patients and HCPs.
Asunto(s)
Investigación Biomédica , Articulación del Codo , Adulto , Humanos , Codo , Cuidadores , Personal de SaludRESUMEN
HYPOTHESIS: This study evaluated several classification systems and expert surgeons' anatomic understanding of these complex injuries based on a consecutive series of patients. We hypothesized that current proximal humeral fracture classification systems, regardless of imaging methods, are not sufficiently reliable to aid clinical management of these injuries. MATERIALS AND METHODS: Complex fractures in 96 consecutive patients were investigated by generation of rapid sequence prototyping models from computed tomography Digital Imaging and Communications in Medicine (DICOM) imaging data. Four independent senior observers were asked to classify each model using 4 classification systems: Neer, AO, Codman-Hertel, and a prototype classification system by Resch. Interobserver and intraobserver κ coefficient values were calculated for the overall classification system and for selected classification items. RESULTS: The κ coefficient values for the interobserver reliability were 0.33 for Neer, 0.11 for AO, 0.44 for Codman-Hertel, and 0.15 for Resch. Interobserver reliability κ coefficient values were 0.32 for the number of fragments and 0.30 for the anatomic segment involved using the Neer system, 0.30 for the AO type (A, B, C), and 0.53, 0.48, and 0.08 for the Resch impaction/distraction, varus/valgus and flexion/extension subgroups, respectively. Three-part fractures showed low reliability for the Neer and AO systems. DISCUSSION: Currently available evidence suggests fracture classifications in use have poor intra- and inter-observer reliability despite the modality of imaging used thus making treating these injuries difficult as weak as affecting scientific research as well. This study was undertaken to evaluate the reliability of several systems using rapid sequence prototype models. CONCLUSION: Overall interobserver κ values represented slight to moderate agreement. The most reliable interobserver scores were found with the Codman-Hertel classification, followed by elements of Resch's trial system. The AO system had the lowest values. The higher interobserver reliability values for the Codman-Hertel system showed that is the only comprehensive fracture description studied, whereas the novel classification by Resch showed clear definition in respect to varus/valgus and impaction/distraction angulation.
Asunto(s)
Fracturas del Hombro/clasificación , Fracturas del Hombro/diagnóstico por imagen , Humanos , Procesamiento de Imagen Asistido por Computador , Variaciones Dependientes del Observador , Reproducibilidad de los Resultados , Tomografía Computarizada por Rayos XRESUMEN
BACKGROUND: Atraumatic shoulder instability of the shoulder is well described, and numerous extrinsic factors have been identified as having a negative influence on long-term shoulder function, including age, sex, smoking, and workers' compensation status. Furthermore, physical factors such as acute or chronic pain, as well as psychological comorbidities such as depression and suicidal thoughts, are common in shoulder-related conditions. METHODS: Patients with atraumatic shoulder instability were recruited from a review of outpatient logbook and inpatient rehabilitation center admission records. Average and worst pain visual analogue scale rates were recorded for acute and chronic shoulder pain. Disability was measured using the "Disability of the Arm and Hand" score, as well as the Stanmore Percentage of Normal Shoulder Assessment (SPONSA). Depression was assessed using Becks Depression Inventory II, and further single psychological items were selected from other psychological assessment questionnaires. RESULTS: We included 64 patients, of which 51 (79.7%) were female. Mean visual analogue scale pain scores were in average 5.11 (standard deviation 2.24) and 5.58 (standard deviation 2.34) for acute and chronic shoulder pain, respectively. A stepwise, multiple linear regression revealed that only chronic shoulder pain remained significantly related to disability (F(1,61) = 46.13, P < .001). A second linear regression analysis was performed and showed a significant association between the overall Disability of the Arm, Shoulder and Hand score and overall Becks Depression Inventory score (F(1,62) = 12.78, P < .001). A further stepwise, multiple linear regression analysis indicated that chronic pain and depression remain independent variables in the prediction of disability. CONCLUSION: In addition to sociodemographic factors, pain and psychological comorbidities were found to have a negative impact on patient's functional outcome. This study further supports the need for an multidisciplinary team, holistic approach in the management of atraumatic shoulder instability patients with particular emphasis on chronic pain management and psychological support.
RESUMEN
BACKGROUND: There remains no gold standard management for deep shoulder periprosthetic joint infection (PJI). This case series aims to present our experience of two-stage revision arthroplasty, including eradication of infection and reoperation rates. METHODS: We retrospectively reviewed patients undergoing revision arthroplasty for shoulder PJI between 2006 and 2015. Cases were confirmed using Musculoskeletal Infection Society (MSIS) and American Academy of Orthopaedic Surgeons (AAOS) guidelines. TSA removal, debridement and irrigation preceded antibiotic-loaded cement spacer insertion and a minimum of six weeks intravenous antibiotics. Reimplantation was performed as a second stage following a negative aspirate. RESULTS: Twenty-eight patients underwent a first stage procedure (mean age 69 years; 16 male, 12 female). Propionibacterium acnes, Methicillin-sensitive Staphylococcus aureus, Coagulase-negative Staphylococcus and Staphylococcus epidermidis were the commonest microorganisms cultured. Five cases had mixed growths and six cases provided no growth. Three patients did not proceed to a second stage. Twenty-five patients underwent reimplantation (mean interval 6.7 months), with 80% remaining infection-free (mean follow-up 38.3 months). DISCUSSION: Managing complex and late presentation shoulder PJI with two-stage revision is associated with high rates of infection eradication (80%). In the absence of a management consensus, our experience supports two-stage revision arthroplasty for eradicating infection in this complex patient group.
RESUMEN
BACKGROUND: Structural changes within the proximal humerus influence the mechanical properties of the entire bone and predispose to low-energy fractures with complex patterns. The aim of the present study was to measure the cortical thickness in different regions of the proximal humerus. METHODS: Thirty-seven proximal humeri were analyzed using novel engineering software to determine cortical thickness in 10 distinct anatomical zones. RESULTS: The cortical thickness values ranged from 0.33 mm to 3.5 mm. Fifteen specimens demonstrated a consistent pattern of progressive cortical thinning that increased between the bicipital groove (thickest), the lesser tuberosity and the greater tuberosity (thinnest). Fifteen humeri were characterized by a progressive increase in cortical thickness between the greater tuberosity (thinnest), the bicipital groove and lesser tuberosity (thickest). The diaphysis exhibited the thickest cortical zone in 27 specimens, whereas the articular surface possessed the thinnest cortex in 18 cases. CONCLUSIONS: In conclusion, this is the first study to comprehensively assess cortical thickness of the humeral head. Our findings suggest that proximal humeral fractures occur along lines of cortical thinning and are displaced by the hard glenoid bone. The identification of specific areas of thick cortices may improve pre-operative planning and optimize fracture fixation.
RESUMEN
BACKGROUND: The aim of this study was to examine the effect of arm position on proximal humerus fracture configuration and to determine whether cortical thinning would predispose to fracture propagation and more complex patterns of injury. METHODS: A drop test rig was designed to simulate falls onto an outstretched arm ('parachute reflex'). Thirty-one cadaveric specimens underwent computer tomography scanning and cortical thicknesses mapping. Humeri were fractured according to one of the two injury mechanisms and filmed using a high-speed camera. Anatomical descriptions of the injuries were made. Areas of thinning were measured and correlated with zones of fracture propagation. RESULTS: Direct impact simulation resulted in undisplaced humeral head split fractures in 53% of cases, with the remainder involving disruption to the articular margin and valgus impaction. Alternatively, the 'parachute reflex' predominantly produced shield-type injuries (38%) and displaced greater tuberosity fractures (19%). A strong correlation was demonstrated between cortical thinning and the occurrence of fracture (odds ratio = 7.766, 95% confidence interval from 4.760 to 12.669, p<0.0001). CONCLUSION: This study has shown that arm position during a fall influences fracture configuration of the proximal humerus. Correlating fracture pattern and mechanism of injury will allow more appropriate fracture reduction techniques to be devised.
RESUMEN
BACKGROUND: Predicting the outcome following fractures of the proximal humerus is an important consideration when effectively counselling patients and planning treatment. The purpose of the present study was to analyze different proximal humeral fracture configurations, using a computerized simulation model, aiming to predict the range of motion (ROM). METHODS: The computer tomography scans of 79 proximal humeral fractures were analyzed using a customized software system that simulated the range of movement at the glenohumeral joint. Four fracture patterns were investigated: (1) head split fractures; (2) greater tuberosity fractures; (3) lesser tuberosity fractures; and (4) combined tuberosity fractures. RESULTS: Intra-articular fractures had the smallest mean (SE) range of abduction and forward flexion [34.3° (6.6°) and 60.7° (12.4°)]. Isolated displaced greater tuberosity resulted in limited abduction but not forward flexion [75.0° (5.9°) and 118.2° (4.9°)]. Isolated lesser tuberosity fractures displayed a ROM comparable to that of healthy subjects [89.3° (3.3°) and 122.6° (3.4°) versus 102.3° (2.8°) and 96.2° (3.8°)]. The reduced head inclination angle was a relatively strong predictor of a limited range of abduction for all fracture types. CONCLUSIONS: The present study describes a novel simulation system used to quantify the bone-determined ROM in proximal humeral fractures and may be a useful adjunct in the diagnostic armamentarium for proximal humeral fractures.
RESUMEN
Intramedullary nailing provides effective fracture fixation with satisfactory functional outcome without the risks associated with plating. Unfortunately, elastic stable intramedullary nailing devices are not always available in every hospital. We have examined the outcome of 23 children who underwent intramedullary fracture fixation of one or both forearm diaphyseal fractures in our department. We have compared the outcome of intramedullary Nancy nailing with the use of standard, available K-wires to achieve intramedullary fixation. We have assessed, over a 12-month period, rates of union (100% in both groups), function of the forearm and complication rates. We have found no significant increase in the rates or severity of complications when using K-wires compared with Nancy nails. Both groups had equal excellent functional outcome. We advocate that if elastic stable intramedullary nailing devices are unavailable, a K-wire can be used to achieve three-point compression of a paediatric forearm diaphyseal fracture.
Asunto(s)
Fijación Intramedular de Fracturas/métodos , Fracturas del Radio/cirugía , Fracturas del Cúbito/cirugía , Adolescente , Clavos Ortopédicos , Hilos Ortopédicos , Niño , Femenino , Fijación Intramedular de Fracturas/instrumentación , Humanos , Masculino , Estudios RetrospectivosRESUMEN
We present an interesting and unusual case of an acutely calcified pin-site infection hematoma mimicking a displaced cartilaginous medial epicondyle, in a child with a Gartland type III fracture. The treatment of such pathology could be confusing and may interfere with the correct clinical decision-making process. To our knowledge, this is the first presentation of such a case.
RESUMEN
Cystic adventitial disease is a rare disease affecting mainly young males. We describe two patients with this disease affecting the iliofemoral artery. These reports reemphasize the importance of keeping cystic adventitial disease as a differential diagnosis in young patients who present with leg ischemia.