[Medical and dental digital photography. Choosing a cheap and user-friendly camera]. / Photographie numérique médicale et dentaire. Le choix d'un appareil photo simple et économique.

INTRODUCTION: Digital photography is more and more important in our everyday medical practice. Patient data, medico-legal proof, remote diagnosis, forums, and medical publications are some of the applications of digital photography in medical and dental fields. A lot of small, light, and cheap cameras are on the market. The main issue is to obtain good, reproducible, cheap, and easy-to-shoot pictures. TECHNICAL NOTE: Every medical situation, portrait in esthetic surgery, skin photography in dermatology, X-ray pictures or intra-oral pictures, for example, has its own requirements. For these reasons, we have tried to find an "ideal" compact digital camera. The Sony DSC-T90 (and its T900 counterpart with a wider screen) seems a good choice. Its small size makes it usable in every situation and its price is low. An external light source and a free photo software (XnView((R))) can be useful complementary tools. The main adjustments and expected results are discussed.

[Mortality due to bronchopulmonary cancers in workers of 2 foundries]. / La mortalité par cancers broncho-pulmonaires parmi les salariés de deux usines sidérurgiques.

A mortality study was carried out in two factories producing stainless steel in order to assess lung cancer risk among workers employed in coke oven, blast and open hearth furnaces, foundry, electric furnace, hot and cold rolling mills and pickling areas. Occupational exposures of interest were chromium compounds, nickel compounds, polycyclic aromatic hydrocarbons (PAH), silica and asbestos. All male workers having at least one year of employment between 01.01.1960 and 31.12.1990 were followed up for mortality. The vital status was assessed from birth place registries. Complete job histories since date of first employment were abstracted from the company files. The smoking habits of 50% of the cohort members were known from medical records. The observed number of deaths (obs) were compared with the expected ones based on regional rates with adjustment for age, sex and calendar time (Standardized Mortality Ratio, SMR). The cohorts included 6324 (factory 1) and 5270 (factory 2) workers. The overall mortality did not differ markedly from that expected in both factories: SMR = 0.95 (obs = 1540, p = 0.05) in factory 1 and SMR = 1.06 (obs = 916, non-significant) in factory 2. SMRs for lung cancer did not differ from unity, respectively 0.99 (obs = 105) and 1.00 (obs = 54), in whole cohorts. Non-significant lung cancer excesses were observed among workers of some workshops where exposures of interest might have occurred: coke oven (SMR = 2.04), blast furnace (SMR = 1.36), open hearth furnace (SMR = 1.75), hot rolling mills (SMR = 1.29). These processes, however, are no longer involved in the study factories. Furthermore, no lung cancer excess was observed among workers employed in current workshops: electric furnaces and cold rolling mills.

Nickel release from nickel-plated metals and stainless steels.

Nickel release from nickel-plated metals often induces allergic contact dermatitis, but, for nickel-containing stainless steels, the effect is not well-known. In this paper, AISI 304, 316L, 303 and 430 type stainless steels, nickel and nickel-plated materials were investigated. 4 tests were performed: patch tests, leaching experiments, dimethylglyoxime (DMG) spot tests and electrochemical tests. Patch tests showed that 96% of the patients were intolerant to Ni-plated samples, and 14% to a high-sulfur stainless steel (303), while nickel-containing stainless steels with a low sulfur content elicited no reactions. Leaching experiments confirmed the patch tests: in acidic artificial sweat, Ni-plated samples released about 100 micrograms/cm2/week of nickel, while low-sulfur stainless steels released less than 0.03 microgram/cm2/week of nickel, and AISI 303 about 1.5 micrograms/cm2/week. Attention is drawn to the irrelevance of the DMG spot test, which reveals Ni present in the metal bulk but not its dissolution rate. Electrochemical experiments showed that 304 and 316 grades remain passive in the environments tested, while Ni-plated steels and AISI 303 can suffer significant cation dissolution. Thus, Ni-containing 304 and 316 steels should not induce contact dermatitis, while 303 should be avoided. A reliable nitric acid spot test is proposed to distinguish this grade from other stainless steels.

Nickel release from stainless steels.

In 1994, a study of nickel release and allergic contact dermatitis from nickel-plated metals and stainless steels was published in this journal. It was shown that low-sulfur stainless steel grades like AISI 304, 316L or 430 (S < or = 0.007%) release less than 0.03 microgram/cm2/week of nickel in acid artificial sweat and elicit no reactions in patients already sensitized to nickel. In contrast, nickel-plated samples release around 100 micrograms/cm2/week of Ni and high-sulfur stainless steel (AISI 303-S approximately 0.3%) releases about 1.5 micrograms/cm2/week in this acid artificial sweat. Applied on patients sensitized to nickel, these metals elicit positive reactions in 96% and 14%, respectively, of the patients. The main conclusion was that low-sulfur stainless steels like AISI 304, 316L or 430, even when containing Ni, should not elicit nickel contact dermatitis, while metals having a mean corrosion resistance like a high-sulfur stainless steel (AISI 303) or nickel-plated steel should be avoided. The determining characteristic was in fact the corrosion resistance in chloride media, which, for stainless steels, is connected, among other factors, to the sulfur content. Thus, a question remained concerning the grades with an intermediate sulfur content, around 0.03%, which were not studied. They are the object of the study presented in this paper. 3 tests were performed: leaching experiments, dimethylglyoxime and HNO3 spot tests, and clinical patch tests; however, only stainless steels were tested: a low-sulfur AISI 304 and AISI 303 as references and 3 grades with a sulfur content around 0.03%: AISI 304L, AISI 304L added with Ca, AISI 304L+Cu. Leaching experiments showed that the 4 non-resulfurised grades released less than 0.5 microgram/cm2/week in acid sweat while the reulfurized AISI 303 released around or more than 0.5 microgram/cm2/week. This is explained by the poorer corrosion resistance of the resulfurized grade. Yet all these grades had the same reaction to the DMG test (negative result), which shows again its lack of sensitivity. In contrast, the HNO3 spot test distinguished AISI 303 from the non-resulfurized grades. Clinical patch tests again showed that some patients (4%) were intolerant to AISI 303, while none were intolerant to the other grades. Thus, this study confirms that non-resulfurized stainless steels (S < or = 0.03%) like Ni-containing 304 and 304L should not elicit Ni contact dermatitis, while the resulfurized grades (S > 0.1%) should be avoided.

Mortality study among workers producing ferroalloys and stainless steel in France.

A mortality study was carried out among the workers of a plant that had produced ferrochromium and stainless steel, and was still producing stainless steel, in order to determine whether exposure to chromium compounds, to nickel compounds, and to polycyclic aromatic hydrocarbons (PAH) could result in a risk of lung cancer for the exposed workers. The cohort comprised 2269 men whose vital status were recorded between 1 January 1952 and 31 December 1982. The smoking habits of 67% of the cohort members were known from medical records. The observed numbers of deaths were compared with the expected ones based on national rates with adjustment for age, sex, and calendar time. A low mortality, achieving statistical significance, was found from all causes (observed = 137, standardised mortality ratio (SMR) = 0.82) and from benign respiratory diseases (observed = one, SMR = 0.15). With regard to mortality from lung cancer, a non-significant excess appeared in the whole cohort (observed = 12, SMR = 1.40). Among the exposed workers, however, a significant lung cancer excess was found (observed = 11, SMR = 2.04) that contrasted with a low SMR (0.32) in the non-exposed group. This excess is unlikely to be explained by smoking, as the tobacco consumption of these two groups was similar. No trend was observed for mortality from lung cancer either according to time since first exposure, or according to duration of exposure. A nested case-control study clearly suggested that this excess of deaths from lung cancer was attributable to former PAH exposures in the ferrochromium production workshops rather than to exposures in the stainless steel manufacturing areas.

Mortality from lung cancer and cardiovascular diseases among stainless-steel producing workers.

The mortality pattern of workers involved in the production of stainless steel (SS) was studied from 1968 to 1984 in order to investigate a possible risk of lung cancer in relation to exposure to chromium compounds, polycyclic aromatic hydrocarbons, and silica. The role of heat exposure in mortality from cardiovascular diseases also was examined. The cohort was comprised of 4,227 workers. Complete individual job histories were provided by the company (UGINE SA). The smoking habits of 24 percent of the cohort members were known from the interview of workers still active during the data collection. The observed numbers of deaths were compared with the expected ones based on national rates with adjustment for age, sex, and calendar time (standardized mortality ratio, SMR). No significant excesses of lung cancer were observed among workers employed in the manufacture of ferroalloys (SMR = 0.68) and in the melting and casting of SS (SMR = 1.04), whereas a significant excess appeared among SS foundry workers (SMR = 2.29). This excess was higher and remained significant among workers with more than 30 years since first employment in the foundry area (SMR = 3.34). Among subjects exposed to heat, no excess was observed for all cardiovascular diseases or for ischemic heart diseases.

Contribution to chromium and nickel enrichment during cooking of foods in stainless steel utensils.

Nickel ingestion can cause exacerbation of dermatitis in patients who are already nickel-sensitive; Chromium (Cr VI) is the 2nd allergen, after nickel. However, stainless steel is widely used in home cookware. In this study, we determined nickel and chromium levels by atomic absorption spectrometry in 11 habitual menus cooked in different grades of stainless steel utensils. We noted a great difference in nickel and chromium intake depending on the menu, and a significant difference between the glass and stainless steel saucepans, but this was very low compared with the levels of nickel and chromium contained in the menus; mean intakes of these elements were under the tolerable daily intake (TDI) recommended by the World Health Organization. Hence, there is no advantage for nickel-sensitive patients in switching to materials other than stainless steel, provided that this is of good quality.