Enhanced magnetic anisotropy and heating efficiency in multi-functional manganese ferrite/graphene oxide nanostructures.

A promising nanocomposite material composed of MnFe2O4 (MFO) nanoparticles of ∼17 nm diameter deposited onto graphene oxide (GO) nanosheets was successfully synthesized using a modified co-precipitation method. X-ray diffraction, transmission electron microscopy, and selected area electron diffraction confirmed the quality of the synthesized samples. Fourier transform infrared measurements and analysis evidenced that the MFO nanoparticles were attached to the GO surface. Magnetic measurements and analysis using the modified Langevin model evidenced the superparamagnetic characteristic of both the bare MFO nanoparticles and the MFO-GO nanocomposite at room temperature, and an appreciable increase of the effective anisotropy for the MFO-GO sample. Magnetic hyperthermia experiments performed by both calorimetric and ac magnetometry methods indicated that relative to the bare MFO nanoparticles, the heating efficiency of the MFO-GO nanocomposite was similar at low ac fields (0-300 Oe) but became progressively larger with increasing ac fields (>300 Oe). This has been related to the higher effective anisotropy of the MFO-GO nanocomposite. In comparison with the bare MFO nanoparticles, a smaller reduction in the heating efficiency was observed in the MFO-GO composites when embedded in agar or when their concentration was increased, indicating that the GO helped minimize the physical rotation and aggregation of the MFO nanoparticles. These findings can be of practical importance in exploiting this type of nanocomposite for advanced hyperthermia. Magnetoimpedance-based biodetection studies also indicated that the MFO-GO nanocomposite could be used as a promising magnetic biomarker in biosensing applications.

Treatment with 1.25% cholesterol enriched diet produces severe fatty liver disease characterized by advanced fibrosis and inflammation and impaired autophagy in mice.

Nonalcoholic fatty liver disease (NAFLD) is reaching pandemic proportions due to overnutrition. The understanding of advanced stages that recapitulate the human pathology is of great importance to get a better mechanistic insight. We hypothesized that feeding of WT (C57BL) mice with a diet containing a high content of fat (21%), sugar (41.5%) and 1.25% of cholesterol (called from now on high fat, sucrose and cholesterol diet, HFSCD) will reproduce the characteristics of disease severity. Analysis of 16 weeks HFSCD-fed mice demonstrated increased liver weight and plasmatic liver damage markers compared with control diet (CD)-fed mice. HFSCD-fed mice developed greater hepatic triglyceride, cholesterol and NEFA content, inflammation and NAFLD activity score (NAS) indicating an advanced disease. HFSCD-fed mice displayed augmented hepatic total CD3+ T and Th9 lymphocytes, as well as reduced Th2 lymphocytes and CD206 anti-inflammatory macrophages. Moreover, T cells and anti-inflammatory macrophages correlated positively and inversely, respectively, with intrahepatic cholesterol content. Consistently, circulating cytotoxic CD8+ T lymphocytes, Th1, and B cell levels were elevated in HFSCD-fed WT mice. Hepatic and adipose tissue expression analysis demonstrated changes in fibrotic and metabolic genes related with cholesterol, triglycerides, and fatty acid synthesis in HFSCD-fed WT. These mice also exhibited reduced antioxidant capacity and autophagy and elevated ERK signaling pathway activation and CHOP levels. Our results indicate that the feeding with a cholesterol-enriched diet in WT mice produces an advanced NAFLD stage with fibrosis, characterized by deficient autophagy and ER stress along with inflammasome activation partially via ERK pathway activation.

Incorporation and luminescence of Yb3+ in CdSe nanocrystals.

Doping quantum dots (QDs) with lanthanide ions is promising to combine the efficient sharp line emission of lanthanides with the strong and size-tunable absorption of QDs. Incorporating lanthanide ions in II-VI QDs remains challenging, however, here we report successful coupling of CdSe QDs with the lanthanide ion Yb(3+). Our spectroscopic results demonstrate that Yb(3+) ions are first adsorbed on the CdSe surface and subsequently incorporated in the nanocrystalline semiconductor particles by growing a Se shell. Evidence for incorporation is provided by the fine structure of the CdSe QDs absorption in the excitation spectrum of the Yb(3+) emission at 1000 nm and the long lifetime of the Yb(3+) emission after shell overgrowth. Sensitized Yb(3+) infrared emission may find application in optical amplifiers, solar concentrators, and bioimaging. The method described is a promising strategy for incorporating lanthanide ions in other II-VI QDs.

Adsorptive Capture of Ionic and Non-Ionic Pollutants Using a Versatile Hybrid Amphiphilic-Nanomica.

A versatile, functional nanomaterial for the removal of ionic and non-ionic pollutants is presented in this work. For that purpose, the high charge mica Na-4-Mica was exchanged with the cationic surfactant (C16H33NH(CH3)2)+. The intercalation of the tertiary amine in the swellable nano-clay provides the optimal hydrophilic/hydrophobic nature in the bidimensional galleries of the nanomaterial responsible for the dual functionality. The organo-mica, made by functionalization with C16H33NH3+, was also synthesized for comparison purposes. Both samples were characterized by X-ray diffraction techniques and transmission electron microscopy. Then, the samples were exposed to a saturated atmosphere of cyclohexylamine for two days, and the adsorption capacity was evaluated by thermogravimetric measurements. Eu3+ cations served as a proof of concept for the adsorption of ionic pollutants in an aqueous solution. Optical measurements were used to identify the adsorption mechanism of Eu3+ cations, since Eu3+ emissions, including the relative intensity of different f-f transitions and the luminescence lifetime, can be used as an ideal spectroscopic probe to characterize the local environment. Finally, the stability of the amphiphilic hybrid nanomaterial after the adsorption was also tested.

A Comparative Study on Luminescence Properties of Y2O3: Pr3+ Nanocrystals Prepared by Different Synthesis Methods.

Pr3+-doped Y2O3 nanocrystals (NCs) have been obtained via five wet-chemistry synthesis methods which were optimized in order to achieve superior optical properties. To this end, a systematic study on the influence of different reaction parameters was performed for each procedure. Specifically, precursor concentration, reaction temperature, calcination temperature, and time, among others, were analyzed. The synthesized Y2O3: Pr3+ NCs were characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), powder X-ray diffraction (PXRD), transmission electron microscopy (TEM), and reflectance and Raman spectroscopy. In addition, the optical properties of such NCs were investigated by excitation, emission, and luminescence decay measurements. Concretely, emission from the 1D2 level was detected in all samples, while emission from 3PJ was absent. Finally, the effect of the synthesis methods and the reaction conditions on the luminescence decay has been discussed, and a comparative study of the different methods using the fluorescence lifetime of so-obtained Y2O3: Pr3+ NCs as a figure of merit has been carried out.

Dye-doped biodegradable nanoparticle SiO2 coating on zinc- and iron-oxide nanoparticles to improve biocompatibility and for in vivo imaging studies.

In vivo imaging and therapy represent one of the most promising areas in nanomedicine. Particularly, the identification and localization of nanomaterials within cells and tissues are key issues to understand their interaction with biological components, namely their cell internalization route, intracellular destination, therapeutic activity and possible cytotoxicity. Here, we show the development of multifunctional nanoparticles (NPs) by providing luminescent functionality to zinc and iron oxide NPs. We describe simple synthesis methods based on modified Stöber procedures to incorporate fluorescent molecules on the surface of oxide NPs. These procedures involve the successful coating of NPs with size-controlled amorphous silica (SiO2) shells incorporating standard chromophores like fluorescein, rhodamine B or rhodamine B isothiocyanate. Specifically, spherical Fe3O4 NPs with an average size of 10 nm and commercial ZnO NPs (ca. 130 nm), both coated with an amorphous SiO2 shell of ca. 15 and 24 nm thickness, respectively, are presented. The magnetic nanoparticles, with a major presence of magnetite, show negligible coercitivity. Hence, interactions (dipolar) are very weak and the cores are in the superparamagnetic regime. Spectroscopic measurements confirm the presence of fluorescent molecules within the SiO2 shell, making these hybrid NPs suitable for bioimaging. Thus, our coating procedures improve NP dispersibility in physiological media and allow the identification and localization of intracellular ZnO and Fe3O4 NPs using confocal microscopy imaging preserving the fluorescence of the NP. We demonstrate how both Fe3O4 and ZnO NPs coated with luminescent SiO2 are internalized and accumulated in the cell cytoplasm after 24 hours. Besides, the SiO2 shell provides a platform for further functionalization that enables the design of targeted therapeutic strategies. Finally, we studied the degradation of the shell in different physiological environments, pointing out that the SiO2 coating is stable enough to reach the target cells maintaining its original structure. Degradation took place only 24 hours after exposure to different media.

Eu3+ Luminescence in High Charge Mica: An In Situ Probe for the Encapsulation of Radioactive Waste in Geological Repositories.

Isolation of high-level radioactive waste (HLW) in deep geological repositories (DGR) through a multibarrier concept is the most accepted approach to ensure long-term safety. Clay minerals are one of the most promising materials to be used as engineered barriers. In particular, high charge micas, as components of the engineered barrier, show superselectivity for some radioactive isotopes and a large adsorption capacity, which is almost twice that of the other low charge aluminosilicates. In addition, high charge micas are optimum candidates for decontamination of nuclear waste through two different mechanisms; namely an ion exchange reaction and a nonreversible mechanism involving the formation of new stable crystalline phases under hydrothermal conditions. In this work, we report a new in situ optical sensor based on the incorporation of Eu3+ in these high charge micas for tracking the long-term physical-chemical behavior of HLW contaminants in DRG under mild hydrothermal conditions. The incorporation of Eu3+ into the interlayer space of the mica originates a well resolved green and red luminescence, from both the 5D1 and 5D0 excited states, respectively. The formation of new crystalline phases under hydrothermal conditions involves important changes in the Eu3+ emission spectra and lifetime. The most interesting features of Eu3+ luminescence to be used as an optical sensor are (1) the presence or absence of the Eu3+ green emission from the 5D1 excited state, (2) the energy shift of the 5D0 → 7F0 transition, (3) the crystal-field splitting of the 7F1 Eu3+ level, and (4) the observed luminescence lifetimes, which are directly related to the interaction mechanisms between the lanthanide ions and the silicate network.

Mn-Doping level dependence on the magnetic response of MnxFe3-xO4 ferrite nanoparticles.

Manganese/iron ferrite nanoparticles with different Mn2+/3+ doping grades have been prepared by a thermal decomposition optimized approach so as to ascertain the doping effect on magnetic properties and, especially, on the magnetic hyperthermia response. The oxidation state and interstitial position of Mn in the spinel structure is found to be critical. The particle size effect has also been studied by growing one of the prepared samples (from 10 to 15 nm in diameter) by a seed mediated growth mechanism. After analyzing the main structural and chemical parameters such as the Mn/Fe rate, crystalline structure, particle diameter, shape and organic coating, some Mn doping induced changes have been observed, such as the insertion of Mn2+ cations yielded more anisotropic shapes. Magnetic characterization, carried out by DC magnetometry (M(H), M(T)) and electron magnetic resonance (EMR) techniques, has shown interesting differences between samples with varying compositions. Lower Mn doping levels lead to larger saturation magnetization values, while an increase of the Mn content causes the decrease of the effective magnetic anisotropy constant at low T. The homogeneous magnetic response under applied magnetic fields, together with the great effect of nanoparticle size and shape in such a response, has been confirmed by the EMR analysis. Finally, a detailed magnetic hyperthermia analysis has demonstrated the large influence of NP size and shape on the magnetic hyperthermia response. The optimized Mn0.13Fe2.87O4_G sample with a diameter of 15 nm and slightly truncated octahedral shape is presented as an interesting candidate for future magnetic hyperthermia mediated biomedical treatments.

Nano-ZnO leads to tubulin macrotube assembly and actin bundling, triggering cytoskeletal catastrophe and cell necrosis.

Zinc is a crucial element in biology that plays chief catalytic, structural and protein regulatory roles. Excess cytoplasmic zinc is toxic to cells so there are cell-entry and intracellular buffering mechanisms that control intracellular zinc availability. Tubulin and actin are two zinc-scavenging proteins that are essential components of the cellular cytoskeleton implicated in cell division, migration and cellular architecture maintenance. Here we demonstrate how exposure to different ZnO nanostructures, namely ZnO commercial nanoparticles and custom-made ZnO nanowires, produce acute cytotoxic effects in human keratinocytes (HaCat) and epithelial cells (HeLa) triggering a dose-dependent cell retraction and collapse. We show how engulfed ZnO nanoparticles dissolve intracellularly, triggering actin filament bundling and structural changes in microtubules, transforming these highly dynamic 25 nm diameter polymers into rigid macrotubes of tubulin, severely affecting cell proliferation and survival. Our results demonstrate that nano-ZnO causes acute cytoskeletal collapse that triggers necrosis, followed by a late reactive oxygen species (ROS)-dependent apoptotic process.