Predictors of periapical bone healing associated with teeth having large periapical lesions following nonsurgical root canal treatment or retreatment: A cone beam computed tomography-based retrospective study.

AIM: Several factors influence the condition of the periapical tissues associated with root filled teeth. The primary objective of this study was to retrospectively evaluate the extent and speed of bone healing of large periapical lesions associated with nonsurgical root canal treatment or retreatment. The secondary objective was to analyse the relationship between the time to complete healing when analysed using cone beam computed tomography (CBCT) and other possible predictors that affect healing. METHODOLOGY: Seventy-nine patients were treated during the years 2013-2020 with large periapical lesions of endodontic origin (10-15 mm) as observed on intraoral periapical radiographs (IOPAR) were included. IOPAR and CBCT were available before treatment and during the follow-up (IOPAR every 6 months and CBCT every 12 months). The volume of periapical lesions was calculated by OsiriX Lite software. Variables such as initial volume of the lesion, age, gender, type of treatment or type of root canal filling were compared to identify the differences between healed and unhealed lesions. Pearson's Chi-square test was used for categorical variables, the t-test for age and the Wilcoxon test for initial volume of the lesion. The association between time to healing and the variables was assessed using univariate analysis and multivariate analysis. The Wilcoxon test was used to observe the association of healing time with categorical variables and the correlation index was measured with the quantitative variables. RESULTS: Of the 79 cases analysed, 60 lesions (76%) were completely healed as verified by CBCT in a mean healing time of 19 months, of which 60% healed fully between 12 and 18 months. Increase in age of patient and larger initial volume of the lesion were associated with a significantly longer healing time (p < .001). Gender, filling material and type of treatment did not have a significant effect on the healing process (p > .05). CONCLUSIONS: Clinicians should be aware that periapical lesions in older patients and larger areas of bone loss take longer to heal. CBCT monitoring of large periapical lesions is critical and it can help clinicians in the decision-making process.

Nanostructured ZnO thin film to enhance gutta-percha's adhesion to endodontic sealers.

BACKGROUND: Gutta-percha (GP) combined with an endodontic sealer is still the core material most widely used for tridimensional obturation. The sealer acts as a bonding agent between the GP and the root dentinal walls. However, one of the main drawbacks of GP core material is the lack of adhesiveness to the sealer. ZnO thin films have many remarkable features due to their considerable bond strength, good optical quality, and excellent piezoelectric, antibacterial, and antifungal properties, offering many potential applications in various fields. This study aimed to explore the influence of GP surface's functionalization with a nanostructured ZnO thin film on its adhesiveness to endodontic sealers. METHODS: Conventional GP samples were divided randomly into three groups: (a) Untreated GP (control); (b) GP treated with argon plasma (PT); (c) Functionalized GP (PT followed by ZnO thin film deposition). GP's surface functionalization encompassed a multi-step process. First, a low-pressure argon PT was applied to modify the GP surface, followed by a ZnO thin film deposition via magnetron sputtering. The surface morphology was assessed using SEM and water contact angle analysis. Further comprehensive testing included tensile bond strength assessment evaluating Endoresin and AH Plus Bioceramic sealers' adhesion to GP. ANOVA procedures were used for data statistical analysis. RESULTS: The ZnO thin film reproduced the underlying surface topography produced by PT. ZnO thin film deposition decreased the water contact angle compared to the control (p < 0.001). Endoresin showed a statistically higher mean bond strength value than AH Plus Bioceramic (p < 0.001). There was a statistically significant difference between the control and the ZnO-functionalized GP (p = 0.006), with the latter presenting the highest mean bond strength value. CONCLUSIONS: The deposition of a nanostructured ZnO thin film on GP surface induced a shift towards hydrophilicity and an increased GP's adhesion to Endoresin and AH Bioceramic sealers.

Acid-Sensing Ion Channels' Immunoreactivity in Nerve Profiles and Glomus Cells of the Human Carotid Body.

The carotid body is a major peripheral chemoreceptor that senses changes in arterial blood oxygen, carbon dioxide, and pH, which is important for the regulation of breathing and cardiovascular function. The mechanisms by which the carotid body senses O2 and CO2 are well known; conversely, the mechanisms by which it senses pH variations are almost unknown. Here, we used immunohistochemistry to investigate how the human carotid body contributes to the detection of acidosis, analyzing whether it expresses acid-sensing ion channels (ASICs) and determining whether these channels are in the chemosensory glomic cells or in the afferent nerves. In ASIC1, ASIC2, and ASIC3, and to a much lesser extent ASIC4, immunoreactivity was detected in subpopulations of type I glomus cells, as well as in the nerves of the carotid body. In addition, immunoreactivity was found for all ASIC subunits in the neurons of the petrosal and superior cervical sympathetic ganglia, where afferent and efferent neurons are located, respectively, innervating the carotid body. This study reports for the first time the occurrence of ASIC proteins in the human carotid body, demonstrating that they are present in glomus chemosensory cells (ASIC1 < ASIC2 > ASIC3 > ASIC4) and nerves, presumably in both the afferent and efferent neurons supplying the organ. These results suggest that the detection of acidosis by the carotid body can be mediated via the ASIC ion channels present in the type I glomus cells or directly via sensory nerve fibers.

Cone-Beam Computed Tomography for the Evaluation of Dental Pulp Chamber Volume: Implications for Clinics and Teaching.

The dental pulp chamber volume is a fundamental measurement in the field of endodontics, but also in forensic sciences, teaching and training, or tissue engineering. This study evaluates the precision of cone-beam computed tomography (CBCT) in comparison with computed micro-tomography (micro-CT) in evaluating the pulp chamber volume of the upper central incisors ex vivo. The intra-operator and inter-operator errors were evaluated, and the results for the two techniques were compared with those of a T-test for paired samples. The intra-operator and inter-operator errors were >0.05, indicating adequate reproducibility in each operator and no significant differences between their measurements. On the other hand, no significant differences between the two measurement techniques were found. The present results demonstrate that CBCT is a precise, feasible, and reproducible technique for the evaluation of the dental pulp chamber volume ex vivo. The results provided with this method are useful for different medical domains but also for the teaching and training of undergraduate and postgraduate students. Furthermore, the findings of this study carry significant clinical implications, as the accurate assessment of the pulp chamber volume is critical in the diagnosis and treatment of various endodontic conditions. The ability of CBCT to provide reliable 3D dental anatomy measurements can enhance the planning of endodontic treatments by allowing for a better understanding of the internal tooth morphology. Additionally, the precision and reproducibility of CBCT in assessing the pulp chamber volume can contribute to improved clinical outcomes and reduced complications during endodontic procedures. These findings further support the increasingly vital role of CBCT in modern clinical practice and underscore its value as an indispensable tool in the field of dentistry.

New Technique for Wedge Selection in Direct Class II Restorations: A Pilot Study.

Background: Performing an appropriate Class II direct restoration is a great challenge. The correct selection of the matrix system and the elements used for its stabilization will have a great impact on the result. The aim of this study is to show a new digital method for a predictable selection of the wedge and compare it with the conventional method. Methods: Sixty patients were randomly divided into two groups. In Group 0, the wedge was selected intraoperatively by visual examination, while in Group 1 the wedge was selected preoperatively through the measurement of the cervical embrasure on the bite-wing radiography. The number of wedges used, modifications to them, and tissue damage were registered, along with the quality of the proximal contact and the marginal adaptation. Results: Student's t-test revealed a statistical difference between the number of wedges used, which was higher in Group 0 (p < 0.05). Pearson Chi-square test showed that tissue damage was statistically higher in Group 0 (p < 0.05), while there was no statistically significant difference between groups in wedge modifications (p > 0.05). Group 1 revealed a higher frequency of satisfactory proximal contact and marginal adaptation (p < 0.05). Conclusions: This new technique reduces wedges waste and tissue damage and provides an adequate interproximal anatomy.

Three-Dimensional Printed Teeth in Endodontics: A New Protocol for Microcomputed Tomography Studies.

This study aimed to describe a support material removal protocol (SMRP) from inside the root canals of three-dimensional printed teeth (3DPT) obtained by the microcomputed tomography (microCT) of a natural tooth (NT), evaluate its effectiveness by comparing the 3DPT to NT in terms of internal anatomy and behaviour toward endodontic preparation, and evaluate if 3DPT are adequate to assess the differences between two preparation systems. After the SMRP, twenty 3DPT printed by PolyJet™ were microCT scanned before preparation and thereafter randomly assigned into two groups (n = 10). One group and NT were prepared using ProTaper Gold® (PTG), and the other group with Endogal® (ENDG). MicroCT scans were carried out after preparation, and the volume increase, volume of dentin removed, centroids, transportation, and unprepared areas were compared. For the parameters evaluated, no significant differences were found between the 3DPT and NT before and after preparation (p > 0.05), and no significant differences were found between the 3DPT PTG group and the 3DPT ENDG group (p > 0.05). It can be concluded that the SMRP described is effective in removing the support material SUP706B™. PolyJet™ is adequate for printing 3DPT. Furthermore, 3DPT printed with high-temperature RGD525™ have similar behaviour during endodontic preparation with PTG as the NT, and 3DPT can be used to compare two preparation systems.

Immunohistochemical detection of PIEZO1 and PIEZO2 in human digital Meissner´s corpuscles.

BACKGROUND: The cutaneous end organ complexes or cutaneous sensory corpuscles are specialized sensory organs associated to low-threshold mechanoreceptors. Mechano-gated proteins forming a part of ion channels have been detected in both the axon and terminal glial cells of Meissner corpuscles, a specific cutaneous end organ complex in the human glabrous skin. The main candidates to mechanotransduction in Meissner corpuscles are members of the Piezo family of cationic ion channels. PIEZO2 has been detected in the axon of these sensory structures whereas no data exists about the occurrence and cell localization of PIEZO1. METHODS: Skin samples (n = 18) from the palmar aspect of the distal phalanx of the first and second fingers were analysed (8 female and 10 males; age range 26 to 61 26-61 years). Double immunofluorescence for PIEZO1 and PIEZO2 together with axonal or terminal glial cell markers was captured by laser confocal microscopy, and the percentage of PIEZOs positive Meissner corpuscles was evaluated. RESULTS: MCs from human fingers showed variable morphology and degree of lobulation. Regarding the basic immunohistochemical profile, in all cases the axons were immunoreactive for neurofilament proteins, neuron specific enolase and synaptophysin, while the lamellar cells displayed strong S100P immunoreactivity. PIEZO1 was detected co-localizing with axonal markers, but never with terminal glial cell markers, in the 56% of Meissner corpuscles; weak but specific immunofluorescence was additionally detected in the epidermis, especially in basal keratinocytes. Similarly, PIEZO2 immunoreactivity was found restricted to the axon in the 85% of Meissner corpuscles. PIEZO2 positive Merkel cells were also regularly found. CONCLUSIONS: PIEZO1 and PIEZO2 are expressed exclusively in the axon of a subpopulation of human digital Meissner corpuscles, thus suggesting that not only PIEZO2, but also PIEZO1 may be involved in the mechanotransduction from low-threshold mechanoreceptors.

Effect of Dentin Irrigants on Push-Out Bond Strength in Resin Cementation Protocols for Fiber Posts in Endodontically Treated Teeth: An In Vitro Study.

The aim of this study is to analyze the effects of different endodontic irrigants and adhesive systems on the resin bond strength of fiber post cementation. In total, 144 single-rooted, unrestored human teeth were endodontically treated and randomly divided into 12 groups according to four endodontic irrigants (distilled water as control; EDTA 17%; NaOCl 5%; chlorhexidine digluconate 2%) and three different adhesive/resin cement systems (etch-and-rinse: orthophosphoric acid, Parabond® A+B/Paracore®; self-etch: ParaBond® Non-Rinse Conditioner, Parabond® A+B/Paracore®; Universal: ClearfilTM Universal Bond/ClearfilTM DC Core Plus). Forty-eight hours after post cementation, ten teeth from each group were cross-sectioned into three discs (cervical, middle and apical regions). Thirty specimens of each group (n = 30) were submitted to a push-out test at a crosshead speed of 1 mm/min. The remaining two teeth of each group were sectioned in the same manner, and the resin-dentin interface was evaluated using scanning electron microscopy (SEM). The results were statistically analyzed with the ANOVA test and Tukey's test (p < 0,01). The adhesive protocols and post space region showed no significant effect on bond strength (p > 0.01). The combination of NaOCl 5% and ClearfilTM Universal Bond reduced the adhesive strength (p < 0.01). The NaOCl 5%, in relation to other irrigants, significantly decreased the push-out bond strength.

A retrospective clinical study to compare the ability of cone-beam computed tomographic images and periapical radiographs to reveal cracked teeth, split teeth, and teeth with vertical root fractures.

BACKGROUND: This retrospective clinical study aimed to compare the sensitivity of cone-beam computed tomographic (CBCT) images and periapical (PA) radiographs to reveal cracked teeth, split teeth, and teeth with vertical root fractures (VRFs). METHODS: The authors included 98 patients (98 teeth) diagnosed with a longitudinal tooth fracture (LTF) (cracked tooth, split tooth, VRF) through direct visualization after extraction and with comprehensive clinical and radiographic records. They collected demographic, clinical, and radiographic data. The authors evaluated PA radiographs and CBCT images to identify fractures, fracture lines, and the different patterns of bone loss associated with these teeth. They used the McNemar test to compare PA radiographs and CBCT scans when assessing bone loss. They used the Fisher test to determine statistical relationships between fracture types and demographic, clinical, and radiologic traits. They used an analysis of variance test to compare patient age with fracture types. RESULTS: CBCT images were significantly more effective (P < .05) in detecting bone loss patterns associated with LTFs than with PA radiographs, with 71% of cases detected via CBCT images compared with 42% via radiographs. Mean age was significantly greater (P < .05) in patients with teeth with VRFs than in patients with split teeth. A significant relationship was observed between the type of fracture and the following variables: root canal treatment (split, VRF, P = .002), deep probing depth (≥ 5 mm) (VRF, P = .026), and having more than 8 teeth extracted from the mouth (VRF, P = .032). Overall, there was a significant difference (P < .001) between the visualization of fracture lines (45% on PA radiographs, 65% on CBCT images). CONCLUSIONS: CBCT scans provided more information on LTFs than PA radiographs, particularly in the identification of periradicular bone changes. PRACTICAL IMPLICATIONS: CBCT imaging can assist in making the clinical diagnosis of LTFs through observation of bone loss patterns, providing more information than PA radiographs.

Repair versus replacement of defective direct dental restorations: A multinational cross-sectional study with meta-analysis.

OBJECTIVES: When dental practitioners encounter a defective restoration, they are faced with a crucial decision whether to repair or replace it. This study aims to explore international preferences for repair procedures and the clinical steps taken during the repair process. METHOD: An 11-question survey was distributed to dentists across 21 countries via different platforms. The survey comprised two sections: the first included five questions aimed at gathering demographic information, while the second consisted of six questions focusing on participants' practices related to the repair of composite or amalgam restorations A meta-analysis was employed to ascertain the pooled odds ratio of repairing versus replacement. The statistical analysis was carried out using the RevMan 5.3 program and forest plots were generated using the same program to visualize the results. RESULTS: The survey was completed by 3680 dental practitioners. The results indicated a strong tendency to repair defective composite restorations (OR: 14.23; 95 % CI: 7.40, 27.35, p < 0.001). In terms of amalgam, there was a significant tendency to replace the restorations (OR: 0.19; 95 % CI: 0.12, 0.30, p < 0.001). When repairing restorations, the most common protocols were etching with orthophosphoric acid and creating an enamel bevel, regardless of the restorative material used. CONCLUSION: The findings of this study indicate that there exists a knowledge gap among dental practitioners regarding restoration repair. It is imperative that dental practitioners receive proper education and training on restoration repair, to ensure the usage of adequate protocols and restoration survival. CLINICAL SIGNIFICANCE: A significant portion of dental practitioners lack the necessary knowledge and education required for the repair of restorations. Therefore, it is imperative to establish guidelines aimed at enhancing the management of defective restorations, along with protocols for clinical interventions. This includes the incorporation of proper courses in undergraduate, graduate, and continuing education programs.

Comparative Study of the Influence of Heat Treatment on Fracture Resistance of Different Ceramic Materials Used for CAD/CAM Systems.

The aim of this study was to compare the influence of heat treatment on fracture resistance (FR) of different ceramic materials used for CAD/CAM systems. METHODS: Eighty monolithic restorations were designed using the same parameters and milled with a CAD/CAM system (CEREC SW 5.0, PrimeMill, Dentsply-Sirona™, Bensheim, Germany), forming five study groups: Group 1 (n = 10), CEREC Tessera (Dentsply-Sirona™, Bensheim, Germany) crystallized (CCT), Group 2 (n = 10), CEREC Tessera uncrystallized (UCT), Group 3 (n = 20), Emax-CAD (Ivoclar Vivadent, Schaan, Liechtenstein) (CEC), Group 4 (n = 20), Vita Suprinity (Vita Zahnfabrik, Bad Säckingen, Germany) (CVS), and Group 5 (n = 20) Cameo (Aidite, Qinhuangdao, China) (CC). RESULTS: The average FR was similar for CCT, CC, and CEC at above 400 N, while CVS and UCT had the lowest values at 389,677 N and 343,212 N, respectively. CONCLUSION: Among the three ceramic materials that exhibited an FR above 400 N, CCT was considered the first recommended choice for CAD/CAM systems. This material not only demonstrated the highest FR but also exhibited outstanding consistency in the related measurements without the presence of outliers. Although the CC material showed high FR, its high dispersion revealed inconsistencies in the repetitions, suggesting caution in its use.

Association between xerostomia, oral and general health, and obesity in adults. A cross-sectional pilot study / Asociación entre xerostomía, salud bucal y general, y obesidad en adultos. Un estudio piloto transversal

Background: The objective of this study was to analyse the association between oral and general health variablesand obesity indicators with the sensation of dry mouth or xerostomia as evaluated on the Xerostomia Inventory(XI).Material and Methods: A total of 354 randomly selected subjects participated in this cross-sectional pilot studyand completed an anonymous questionnaire. Anthropometric, clinical, and xerostomic variables were evaluated.Kruskal-Wallis, ANOVA and Bonferroni test were used for multiple comparisons. ROC curves and multinomiallogistic regression were used to determine the (OR) risk of xerostomia.Results: A total of 30.7 % of respondents reported xerostomia based on XI. The dry mouth question, the XItaken as a “gold standard”, showed a diagnostic sensitivity of 70.37 %, and a specificity of 83.27 % (AUC=0.768,p<0.001). Logistical regression showed the highest xerostomia OR was associated to patients with bad self-per-ceived health, 6.31 (CI 95% 2.89-13.80, p<0.001). In the model adjusted for tooth mobility, bone or respiratorydiseases, and the consumption of anxiolytics and antidepressants, the OR was 3.46 (CI 95% 1.47-8.18, p=0.005).Conclusions: a high prevalence of xerostomia was found in this cross-sectional pilot study, which was significantlymore frequent in women, and increased with age. Xerostomia was associated to several systemic diseases, psycho-logical conditions, and oral functional disorders such as tooth mobility.These preliminary results can serve as the basis for developing guidelines for the application of innovative mea-sures designed to improve the quality of life of individuals with xerostomia.(AU)

Identificación de microorganismos por reacción en cadena de la polimerasa en necrosis pulpar y periodontitis apical / Identification of microorganisms by polymerase chain reaction in pulp necrosis and apical periodontitis

Objetivos: identificar, mediante la técnica de reacción en cadena de la polimerasa, diez especies bacterianas procedentes de conductos radiculares necróticos, así como analizar su asociación con signos y síntomas de la periodontitis apical (dolor, exudado y movilidad), dentro de un área geográfica específica, Santiago de Compostela (noroeste de España). Métodos: se realizó un estudio descriptivo, en un plazo de recogida de muestras de un año. Se extrajeron 43 muestras de los conductos radiculares necróticos, a razón de una muestra por pacientes, quienes fueron examinados previamente para determinar la presencia de periodontitis apical radiográfica, de la cual fueron descritos sus signos y síntomas. Se utilizaron puntas de papel absorbentes estériles y se procedió a extraer de dichas muestras el ADN por medio de la técnica del fenol-cloroformo. El producto se amplificó por medio de la reacción en cadena de la polimerasa, usando cebadores específicos para diez microorganismos. El resultado se visualizó por medio de electroforesis, utilizando un transiluminador UV. Los resultados se analizaron estadísticamente, para así establecer qué microorganismos estaban presentes de forma individual y cuáles se presentaron formando asociaciones como el llamado red complex, en relación con los signos y síntomas presentes en la periodontitis apical. Resultados: Fusobacterium nucleatum fue el microorganismo con presencia de forma individual más frecuente (83,72 por ciento de las muestras). En cuanto al estudio de la asociación de los microorganismos con los signos y síntomas, Porphyromonas endodontalis presentó una asociación significativa con respecto al exudado (p< 0,05) y movilidad (p< 0,05). En cambio, Enterococcus spp. y Treponema denticola (p< 0,01) presentaron ambos una asociación significativa con respecto al dolor. En cuanto a la incidencia del red complex fue de 6 casos en total. Conclusiones: Fusobacterium nucleatum y Streptococcus spp. son los microorganismos identificados con mayor porcentaje en comparación a los restantes estudiados. Porphyromonas endodontalis es el microorganismo con mayor asociación estadística con respecto a los signos y síntomas de la periodontitis apical(AU)

Objectives: identify by polymerase chain reaction technique ten bacterial species obtained from necrotic root canals, and analyze their association with signs and symptoms of apical periodontitis (pain, exudate and mobility) in a specific geographic area: Santiago de Compostela (northwestern Spain). Methods: a descriptive study was conducted based on a one-year sample collection period. Forty-three samples were taken from necrotic root canals, at a rate of one sample per patient, who had been previously examined for radiographic apical periodontitis, of which the signs and symptoms were described. Sterile absorbent paper points were used to extract the DNA samples, applying the phenol-chloroform technique. The product was amplified by polymerase chain reaction, using specific primers for ten microorganisms. The result was visualized by electrophoresis using a UV transilluminator. Outcomes were analyzed statistically to determine which microorganisms were present individually and which formed associations such as the so-called red complex, according to the signs and symptoms present in the apical periodontitis. Results: Fusobacterium nucleatum was the most common individual microorganism (83.72 percent of the samples). As to the association of microorganisms with signs and symptoms, Porphyromonas endodontalis was found to be significantly associated with exudate (p< 0.05) and mobility (p< 0.05), while both Enterococcus spp. and Treponema denticola (p< 0.01) had a significant association with pain. Incidence of the red complex was 6 cases in all. Conclusions: Fusobacterium nucleatum and Streptococcus spp. were the microorganisms identified as displaying the highest percentages. Porphyromonas endodontalis showed the greatest statistical association with signs and symptoms of apical periodontitis(AU)

Identificación de microorganismos por reacción en cadena de la polimerasa en necrosis pulpar y periodontitis apical / Identification of microorganisms by polymerase chain reaction in pulp necrosis and apical periodontitis

Objetivos: identificar, mediante la técnica de reacción en cadena de la polimerasa, diez especies bacterianas procedentes de conductos radiculares necróticos, así como analizar su asociación con signos y síntomas de la periodontitis apical (dolor, exudado y movilidad), dentro de un área geográfica específica, Santiago de Compostela (noroeste de España). Métodos: se realizó un estudio descriptivo, en un plazo de recogida de muestras de un año. Se extrajeron 43 muestras de los conductos radiculares necróticos, a razón de una muestra por pacientes, quienes fueron examinados previamente para determinar la presencia de periodontitis apical radiográfica, de la cual fueron descritos sus signos y síntomas. Se utilizaron puntas de papel absorbentes estériles y se procedió a extraer de dichas muestras el ADN por medio de la técnica del fenol-cloroformo. El producto se amplificó por medio de la reacción en cadena de la polimerasa, usando cebadores específicos para diez microorganismos. El resultado se visualizó por medio de electroforesis, utilizando un transiluminador UV. Los resultados se analizaron estadísticamente, para así establecer qué microorganismos estaban presentes de forma individual y cuáles se presentaron formando asociaciones como el llamado red complex, en relación con los signos y síntomas presentes en la periodontitis apical. Resultados: Fusobacterium nucleatum fue el microorganismo con presencia de forma individual más frecuente (83,72 por ciento de las muestras). En cuanto al estudio de la asociación de los microorganismos con los signos y síntomas, Porphyromonas endodontalis presentó una asociación significativa con respecto al exudado (p< 0,05) y movilidad (p< 0,05). En cambio, Enterococcus spp. y Treponema denticola (p< 0,01) presentaron ambos una asociación significativa con respecto al dolor. En cuanto a la incidencia del red complex fue de 6 casos en total. Conclusiones: Fusobacterium nucleatum y Streptococcus spp. son los microorganismos identificados con mayor porcentaje en comparación a los restantes estudiados. Porphyromonas endodontalis es el microorganismo con mayor asociación estadística con respecto a los signos y síntomas de la periodontitis apical(AU)

Objectives: identify by polymerase chain reaction technique ten bacterial species obtained from necrotic root canals, and analyze their association with signs and symptoms of apical periodontitis (pain, exudate and mobility) in a specific geographic area: Santiago de Compostela (northwestern Spain). Methods: a descriptive study was conducted based on a one-year sample collection period. Forty-three samples were taken from necrotic root canals, at a rate of one sample per patient, who had been previously examined for radiographic apical periodontitis, of which the signs and symptoms were described. Sterile absorbent paper points were used to extract the DNA samples, applying the phenol-chloroform technique. The product was amplified by polymerase chain reaction, using specific primers for ten microorganisms. The result was visualized by electrophoresis using a UV transilluminator. Outcomes were analyzed statistically to determine which microorganisms were present individually and which formed associations such as the so-called red complex, according to the signs and symptoms present in the apical periodontitis. Results: Fusobacterium nucleatum was the most common individual microorganism (83.72 percent of the samples). As to the association of microorganisms with signs and symptoms, Porphyromonas endodontalis was found to be significantly associated with exudate (p< 0.05) and mobility (p< 0.05), while both Enterococcus spp. and Treponema denticola (p< 0.01) had a significant association with pain. Incidence of the red complex was 6 cases in all. Conclusions: Fusobacterium nucleatum and Streptococcus spp. were the microorganisms identified as displaying the highest percentages. Porphyromonas endodontalis showed the greatest statistical association with signs and symptoms of apical periodontitis(AU)