Fast and Efficient sensing of Drugs in Water Using Self-Assembling D-Glucamine functionalized Naphthalenediimide and 1,8-Naphthalimide Fluorophores.

Fast and sensitive quantification of drugs as emerging pollutants in water bodies is a pressing need in contemporary society, to prevent serious environmental concerns that could negatively impact on human health. This explains the surge of interest in this field, and the need to identify highly selective sensing systems. Addressing this issue, in this work we synthesized two D-glucamine functionalized fluorophores bearing self-assembling cores, as 1,8-naphthalimide and naphthalene diimide. We studied their self-assembly in water solution, and characterized the aggregated formed by determining their stability constant, their morphology and size by scanning electron microscopy, resonance light scattering and dynamic light scattering, as well their solid-state emission ability. Then, we studied their sensing ability, in water, towards pharmaceutically active compounds such as ciprofloxacin, nalidixic acid, carbamazepine and diclofenac sodium salt, by fluorescence investigation. Data collected show that the self-assembling ability is significantly affected by the fluorophore structure, which in turn also determines sensing ability. In particular, the naphtalene diimide-based probe was the most sensitive, with LOD as low as 0.01 mM in the presence of nalidixic acid, which is in line and competitive with more complex sensing systems, recently reported in the literature.

The Role Played by Ionic Liquids in Carbohydrates Conversion into 5-Hydroxymethylfurfural: A Recent Overview.

Obtaining industrially relevant products from abundant, cheap, renewable, and low-impacting sources such as lignocellulosic biomass, is a key step in reducing consumption of raw fossil materials and, consequently, the environmental footprint of such processes. In this regard, a molecule that is similar to 5-hydroxymethylfurfural (5-HMF) plays a pivotal role, since it can be produced from lignocellulosic biomass and gives synthetic access to a broad range of industrially important products and polymers. Recently, ionic liquids (ILs) have emerged as suitable solvents for the conversion of biomass and carbohydrates into 5-HMF. Herein, we provide a bird's-eye view on recent achievements about the use of ILs for the obtainment of 5-HMF, covering works that were published over the last five years. In particular, we first examine reactions involving homogeneous catalysis as well as task-specific ionic liquids. Then, an overview of the literature addressing the use of heterogeneous catalysts, including enzymes, is presented. Whenever possible, the role of ILs and catalysts driving the formation of 5-HMF is discussed, also comparing with the same reactions that are performed in conventional solvents.

Interplay of Acidity and Ionic Liquid Structure on the Outcome of a Heterocyclic Rearrangement Reaction.

The study of suitable probe reactions is a powerful tool to investigate the properties of nonconventional solvents such ionic liquids (ILs). In particular, we studied the acid-catalyzed mononuclear rearrangement of heterocycles (MHR) of the Z-phenylhydrazone of 5-amino-3-benzoyl-1,2,4-oxadiazole into the relevant 1,2,3-triazole, in solution of ILs by means of kinetic measurements. We chose as solvents six ILs differing both in the cation and anion, in the presence of five carboxylic and sulfonic acids as catalysts. For a useful comparison, the reaction was also performed in 1,4-dioxane and methanol. In general, the reaction occurs faster in ILs, compared to conventional solvents, according to the weaker solvation interactions operating in the former media. The effect of IL anion and cation on the reactivity and on the acidic strength of the catalysts was analyzed. To this aim, we measured the acidic strength of the sulfonic acids in each IL, estimated by the equilibrium formation constant of each acid with 4-nitroaniline. We found that the trend of reactivity as a function of the IL anion mainly reflects the larger difference in acidic strengths of the catalyst. Conversely, acidic strength spans a narrower range as a function of the IL cation. As a result, other factors come into play, such as the π-π interactions involving aromatic IL cations, substrate, and transition states, leading to a more articulate trend.

Ionic liquids: "normal" solvents or nanostructured fluids?

Ionic liquids (ILs) are a class of non-conventional solvents, which, for almost two decades, have continued to generate burgeoning interest in different fields of present-day chemical research with few similar precedents. Among the various aspects related to ILs, a topic worthy of in-depth analysis is their influence on organic reactivity and reaction rates. In light of this, the present short review aims to provide an overview of the literature from 2010 to the present day that addresses this issue. In particular, we herein present two main different viewpoints by which the solvent effect of ILs is explained: the first is mainly based on considering the bulk polarity of ILs and linear solvation energy relationships, while the other treats ILs as nanostructured fluids. In both cases, studies dealing with IL mixtures are also covered. Finally, literature addressing the area of supramolecular catalysis "by" or "in" ILs is also reported. This is one of the few reviews covering these specific aspects, aiming to provide a useful framework to guide future research into the effects of ILs on organic reactivity.

Ionic Liquid Gels: Supramolecular Reaction Media for the Alcoholysis of Anhydrides.

The search of new enantioselective catalysts, able to promote synthetically useful organic reactions with high levels of asymmetric induction, should be associated with the attention to the suitable reaction medium able to achieve the best efficiency in chemical processes. We have investigated the enantioselective desymmetrization of cyclic meso-anhydrides in nonconventional reaction media such as ionic liquids and supramolecular gels. With this aim, we examined several variables in the reacting system: the nature of ionic liquid used as the reaction medium, the gelation solvent, the structure of the anhydrides, the structure of alcohols, the chiral catalysts, and the reaction conditions, i.e., temperature and time. The different components of the system differently influence the reaction outcome, and to understand the interactions existing among them, 1H NMR investigation was carried out. In general, the nonconventional reaction media demonstrated better performance than conventional ones, applying only a small amount of solvent. Good results in terms of yield and enantiomeric excess have been obtained in ionic liquid gels that seem promising media in the catalytic field. Furthermore, to the best of our knowledge, this is one of the first examples for the study of asymmetric alcoholysis of anhydrides in ionic liquid solution and gel phase.

Quantifying the Impact of Linear Regression Model in Deriving Bio-Optical Relationships: The Implications on Ocean Carbon Estimations.

Linear regression is widely used in applied sciences and, in particular, in satellite optical oceanography, to relate dependent to independent variables. It is often adopted to establish empirical algorithms based on a finite set of measurements, which are later applied to observations on a larger scale from platforms such as autonomous profiling floats equipped with optical instruments (e.g., Biogeochemical Argo floats; BGC-Argo floats) and satellite ocean colour sensors (e.g., SeaWiFS, VIIRS, OLCI). However, different methods can be applied to a given pair of variables to determine the coefficients of the linear equation fitting the data, which are therefore not unique. In this work, we quantify the impact of the choice of "regression method" (i.e., either type-I or type-II) to derive bio-optical relationships, both from theoretical perspectives and by using specific examples. We have applied usual regression methods to an in situ data set of particulate organic carbon (POC), total chlorophyll-a (TChla), optical particulate backscattering coefficient (bbp), and 19 years of monthly TChla and bbp ocean colour data. Results of the regression analysis have been used to calculate phytoplankton carbon biomass (Cphyto) and POC from: i) BGC-Argo float observations; ii) oceanographic cruises, and iii) satellite data. These applications enable highlighting the differences in Cphyto and POC estimates relative to the choice of the method. An analysis of the statistical properties of the dataset and a detailed description of the hypothesis of the work drive the selection of the linear regression method.

Carbon Nanomaterial Doped Ionic Liquid Gels for the Removal of Pharmaceutically Active Compounds from Water.

Due to large drug consumption, pharmaceutically active compounds (PhACs) can be found as water contaminants. The removal of PhACs is a significant issue, as they can easily overtake traditional purification methods. Because of their surface properties, carbon nanomaterials are among the most efficient materials able to adsorb PhACs. However, their limitation is their recovery after use and their possible leakage into the aquatic system. Consequently, new hybrid supramolecular ionic liquid gels (HILGs) have been designed for the adsorption of some antibiotic drugs (ciprofloxacin and nalidixic acid) from water. The chemical-physical properties of gels, such as the temperature of the gel-sol transition, morphology, and rheology, have been studied for their use as sorbents. These properties influence the gel removal efficiency of PhAC, i.e., the best system is the gel that presents weaker colloidal forces. A fast removal (RE = 51%) is obtained in 3 h for ciprofloxacin, while a slower adsorption process is observed for nalidixic acid (RE = 88% in 24 h). HILGs can be recycled up to seven cycles and regenerated. In addition, they can be used with higher concentrations or volumes of PhAC and in a realistic apparatus like dialysis membranes. These peculiarities suggest that HILGs can be competitive with more complex sorbent systems.

Aggregation Processes of Perylene Bisimide Diimidazolium Salts.

The supramolecular aggregation of three diimidazolium-functionalized perylene bisimides, differing in the alkyl chain length was investigated. These salts form aggregates in solvents like chloroform, dichloromethane, and glycerol. Solvent-, concentration-, and temperature-dependent spectroscopic studies were carried out, evidencing the occurrence of an isodesmic, enthalpy-driven aggregation process, underpinned by π-π stacking and hydrogen bonding. Moreover, dynamic light scattering (DLS) measurements and SEM images revealed that these salts aggregate in chloroform into elongated structures.

Organic salts and aromatic substrates in two-component gel phase formation: the study of properties and release processes.

To identify gel phases able to act as confined reaction media or materials for the removal of organic pollutants, we studied two-component gel phases formed by naphthalenedisulfonate diimidazolium salts in the presence of some organic guests, in 1-propanol solution. Guests differing in π-surface area, bulkiness and electronic properties were taken into account. Soft materials obtained were investigated for their thermal stability, self-repairing ability and morphology. Furthermore, two-component gel phase formation was studied using resonance light scattering (RLS) measurements. Guest release processes from the gel phase were also studied. These processes were monitored as a function of time using both UV-vis and RLS measurements and considering important parameters such as the gelator concentration, the nature of extraction solvent and the extension of contact surface area between solvent and gel phase. Data collected shed light on the properties of the two-component gels and could represent a useful tool to better plan the application of these soft materials.

Task specific dicationic ionic liquids: recyclable reaction media for the mononuclear rearrangement of heterocycles.

Nine functionalized dicationic ionic liquids were used to study the base catalyzed mononuclear rearrangement of (Z)-phenylhydrazone of 3-benzoyl-5-phenyl-1,2,4-oxadiazole into the corresponding triazole at 363 K. Ionic liquids were characterized by the presence of 1-(1-imidazolylmethyl)-3,5-di[1-(3'-octylimidazolylmethyl)]benzene cation, bearing on the structure a neutral imidazole unit as basic functionality. Besides anions generally used for monocationic ionic liquids, such as [Br(-)], [BF4(-)], and [NTf2(-)], also dianions having a rigid aromatic spacer such as 1,4-benzenedicarboxylate, 2,6-naphthalenedicarboxylate, and 1,5- and 2,6-naphthalenedisulfonate were taken into account. Furthermore, to have information about the effect deriving from the spacer rigidity also dianions such as 1,4-butanedicarboxylate and 1,6-hexanedicarboxylate were used. The basic strength of dicationic ionic liquids was determined using the Hammett indicator method. Data collected gave evidence that the outcome of the target reaction was affected by the nature of interactions operating between cation and anion of the ionic liquid used. Quite interestingly, solvent systems used had a good recyclability. Indeed, in some cases, they were reused for four cycles without significant loss in yield.

Molecular "pincer" from a diimidazolium salt: a study of binding ability.

The anion recognition ability of the dicationic imidazolium salt 3,3'-di-n-octyl-1,1'-(1,3-phenylenedimethylene)diimidazolium 1,5-naphthalenedisulfonate ([m-Xyl-(oim)2][1,5-NDS]) was investigated in acetonitrile solution by means of proton NMR titrations. A wide range of anions, comprising simple inorganic ions, halides, and mono- and dicarboxylates was taken into account. The study showed that this receptor binds carboxylate anions more strongly than halides. Moreover [m-Xyl-(oim)2][1,5-NDS] displays selectivity for di- over monocarboxylate anions. The complex stability was mainly affected by the anion basicity in the presence of monocarboxylates, whereas the flexibility of the alkyl chain linking the two carboxylate moieties appeared to play a major role in the presence of dicarboxylate anions.

How Ionic Liquid Gels Work on the Removal of Bisphenol A from Wastewater.

The occurrence of emerging pollutants in water bodies is a pressing issue of modern society and identifying materials to remove them is the main target of current research. In this work, we prepared and characterized supramolecular gels of 1,3:2,4-dibenzylidene-d-sorbitol (DBS) in ionic liquids differing for the anion and the aliphatic or aromatic nature of the cation. We characterized our gels for their thermal stability and mechanical properties. We also found that all gels self-heal in 24 h after being cut by a razor blade. We then used our gels as sorbents to remove bisphenol A, an endocrine disruptor compound, from aqueous solutions. All gels adsorb BPA with high removal efficiencies, and those obtained in aliphatic ionic liquids act faster than their aromatic counterparts. The highest observed adsorption capacity was 314 mg/g. Gels were reused without loss in performance and need for intermediate washing, and the gel obtained in [bmpip][NTf2] could be reused 37 times, maintaining a removal efficiency higher than 96%. It was loaded in a sequential system of syringes to treat flowing aqueous phases, removing 60% of BPA in 30 min. We also embedded the gel in the dialysis membrane and observed a removal efficiency of 85% after 48 h.

Upcycling of Poly(lactic acid) Waste: A Valuable Strategy to Obtain Ionic Liquids.

With the aim to investigate new strategies for upcycling of plastic waste, we performed aminolysis of poly(lactic acid) (PLA), using N,N-dimethylethylenediamine (DMEDA), N,N-dimethylpropylenediamine (DMPDA), and 3-aminopropylimidazole (API) as nucleophiles. The N-substituted lactamides obtained were alkylated by using alkyl halides differing in alkyl chain length, obtaining organic salts that in most cases behaved as ionic liquids (ILs). Both aminolysis of PLA and alkylation of amides were carried out taking into consideration the basic principles of the holistic approach to green chemistry, applied at a laboratory scale, and carefully selecting the nature of the reaction solvent, temperature range, and amount of reagents. Organic salts obtained from the alkylation of N-substituted lactamides were investigated to determine their glass or solid-liquid transitions and their thermal stability. Furthermore, cytotoxicity toward normal lung fibroblasts was also assessed. Data collected show that the proposed strategy represents a valuable protocol to upcycle plastic waste, using it as starting material to obtain alternative solvents of potential industrial relevance.

Insights about the ability of folate based supramolecular gels to act as targeted therapeutic agents.

With the aim to obtain targeted chemotherapeutic agents, imidazolium and ammonium-based folate salts were synthesized. Their photophysical behavior was investigated both in buffer and buffer/DMSO solution as well as in solid phase, performing UV-vis and fluorescence investigations. Properties of the aggregates were also analyzed by dynamic light scattering. Gelation ability of the salts was analyzed in biocompatible solvents, and gel phases obtained were characterized by determining critical gelation concentrations and gel-solution transition temperatures. Insights about gelator interactions in the tridimensional network were also gained performing ATR-FTIR investigation. Properties of soft materials were further analyzed performing rheology measurements, scanning electron microscopy, fluorescence and resonance light scattering investigations. Antiproliferative activity of organic salts was tested towards two breast cancer cell lines, expressing different levels of folate receptor, namely MDA-MB-231 and MCF-7, and a normal epithelial cell line, like h-TER T-RPE-1, by using MTT assay. Dichlodihydrofluorescein acetate test was performed to verify the role of oxidative stress in cell death. Finally, antiproliferative activity was also evaluated in gel phase, to verify if salts were able to retain biological activity also after the entrapment in the gelatinous network. Results collected evidence that folate based organic salts were able to behave as targeted chemotherapeutic agents both in solution and gel phase, showing uptake mechanism and selectivity indexes that depend on both cancer cell line nature and salt structure.

Binary mixtures of ionic liquids: a joint approach to investigate their properties and catalytic ability.

The growing interest in the properties and applications of ionic liquids has recently led to research into the possibility of using their binary mixtures. This work reports on the effects of binary mixtures of ionic liquids on the outcome of organic reactions such as the mononuclear rearrangement of heterocycles and the solvatochromic behavior of Nile Red. Binary mixtures formed by ionic liquids differing in the structure of the cation and the anion are taken into account. In particular, ionic liquids such as 1-benzyl-3-butylimidazolium bis(trifluoromethanesulfonyl)imide, 1-(2,3,4,5,6-pentafluorobenzyl)-3-butylimidazolium bis(trifluoromethanesulfonyl)imide, and 1-benzyl-3-butylimidazolium tetrafluoroborate, are studied. To achieve a deep understanding of the properties of ionic-liquid binary mixtures, their three-dimensional organization was analyzed by a combination of resonance light scattering, UV/Vis spectroscopy, and (1)H and (19)F NMR spectroscopy. Data collected herein evidence that the most significant changes in the ionic lattice structure, and consequently the most pronounced effects exerted as solvent media, occur when the studied system involves a blend of different anions.

Geminal imidazolium salts: a new class of gelators.

The gelling behavior of some geminal diimidazolium salts was investigated in solvents differing in polarity and hydrogen bond donor ability. The used salts, namely the 3,3'-di-n-decyl-1,1'(1,4-phenylenedimethylene)diimidazolium dibromide [p-Xyl-(decim)(2)][Br](2) (1), the 3,3'-di-n-dodecyl-1,1'(1,4-phenylenedimethylene)diimidazolium dibromide [p-Xyl-(dodecim)(2)][Br](2) (2), and the 3,3'-di-n-dodecyl-1,1'(1,4-phenylenedimethylene)diimidazolium ditetrafluoroborate [p-Xyl-(dodecim)(2)][BF(4)](2) (3), differ in the alkyl chain length and in the anion properties, such as size, shape, and coordination ability. In all cases in which gelation process was observed, the obtained gels were characterized by gel melting temperature determination, resonance light scattering, and UV-vis measurements. On the whole, the investigation allowed to get information about both the thermodynamic stability and the features of the aggregates characterizing the soft materials at the equilibrium. Data collected by us point out that the used organic salts are able to behave as both hydro- and organogelators. In particular, bromide salts formed hydrogels in the presence of α-cyclodextrin allowing to hypothesize that the gelation process is favored by the formation of supramolecular assemblies. To verify this hypothesis, 1D and 2D (1)H NMR measurements were carried out. Both the alkyl chain length and the anion ability to reticulate the three-dimensional network proved to be determinant factors in affecting the gelation process as well as the features of the gel phases. Finally, with the future aim to use the obtained gels as reaction media, the effect of a guest molecule such as the UV-vis active probe Nile Red was studied.

Photochemical isomerization of aryl hydrazones of 1,2,4-oxadiazole derivatives into the corresponding triazoles.

The photochemical version of the Boulton-Katritzky reaction has been studied, examining the behaviour of the arylhydrazones of 3-benzoyl-5-X-1,2,4-oxadiazoles. The effect of several modifications of the substrates structure (the E and/or Z structures of arylhydrazones, the possible presence of substituents in the arylhydrazono moiety, and the nature of substituents at C-5 of the 1,2,4-oxadiazole ring) on the course of the photochemical rearrangement has been examined.

Biochar Particles Obtained from Agricultural Carob Waste as a Suitable Filler for Sustainable Biocomposite Formulations.

In the context of sustainable and circular economy, the recovery of biowaste for sustainable biocomposites formulation is a challenging issue. The aim of this work is to give a new life to agricultural carob waste after glucose extraction carried out by a local factory for carob candy production. A pyrolysis process was carried out on bio-waste to produce biofuel and, later, the solid residual fraction of pyrolysis process was used as interesting filler for biocomposites production. In this work, biochar particles (BC) as a pyrolysis product, after fuels recovery of organic biowaste, specifically, pyrolyzed carobs after glucose extraction, were added on poly(butylene-adipate-co-terephthalate), (PBAT), at two different concentrations, i.e., 10 and 20 wt%. The BC have been produced using three pyrolysis processing temperatures (i.e., 280, 340 and 400 °C) to optimize the compositions of produced solid fractions and biofuels. The resulting particles from the pyrolysis process (BC280, BC340 and BC400) were considered as suitable fillers for PBAT. Firstly, the BC particles properties were characterized by elemental composition and spectroscopy analysis, particle size measurements and evaluation of radical scavenging activity and efficiency. Moreover, PBAT/BC composites were subjected to analysis of their rheological and thermal behavior, morphologies and mechanical properties. In addition, accelerated weathering, monitored by both tensile test and spectroscopic analysis, was carried out, and obtained results show that the biochar particles can exert a beneficial effect on photo-oxidation delay of PBAT matrix.

Acid- and base-catalysis in the mononuclear rearrangement of some (Z)-arylhydrazones of 5-amino-3-benzoyl-1,2,4-oxadiazole in toluene: effect of substituents on the course of reaction.

The reaction rates for the rearrangement of eleven (Z)-arylhydrazones of 5-amino-3-benzoyl-1,2,4-oxadiazole 3a-k into the relevant (2-aryl-5-phenyl-2H-1,2,3-triazol-4-yl)ureas 4a-k in the presence of trichloroacetic acid or of piperidine have been determined in toluene at 313.1 K. The results have been related to the effect of the aryl substituent by using Hammett and/or Ingold-Yukawa-Tsuno correlations and have been compared with those previously collected in a protic polar solvent (dioxane/water) as well as with those on the analogous rearrangement of the corresponding (Z)-arylhydrazones of 3-benzoyl-5-phenyl-1,2,4-oxadiazole 1a-k in benzene. Some light can thus be shed on the general differences of chemical reactivity between protic polar (or dipolar aprotic) and apolar solvents.

Aryl azides formation under mild conditions: a kinetic study in some ionic liquid solutions.

The kinetics of nucleophilic aromatic substitution of three nitrothiophene derivatives in different [1-butyl-3-methylimidazolium][N(3)]/ionic liquid binary mixtures was studied spectrophotometrically at 298 K. Ionic liquids differing for cation structure (imidazolium or pyrrolidinium) and for size, shape, and coordination ability of the anion ([BF(4)(-)], [PF(6)(-)], [SbF(6)(-)], and [NTf(2)(-)]) were used. Furthermore, in order to have a comparison with conventional organic solvents, the target reaction was also carried out in DMF solution at increasing concentration of NaN(3) or [bmim][N(3)]. Data collected show that the reaction occurs faster in DMF than in ionic liquid solution. Furthermore, as a consequence of the ability of all solvent media to favor the leaving group departure, a simple linear dependence of the pseudo-first-order kinetic constant from nucleophile concentration was detected. The results of this kinetic investigation once more underline that ionic liquids are able to exert peculiar effects that can be understood also considering their three-dimensional organization.