Comparative study of rapid ATP bioluminescence assay and conventional plate count method for development of rapid disinfecting activity test.

Antimicrobial activity is tested when developing disinfectants, pharmaceutical products, cosmetics, and many other consumer products. However, the plate count method, the conventional way to count the number of microorganisms, needs several days of culture. Consequently, a means of rapid microbial detection is strongly desired to replace this method. We have already developed a rapid and sensitive microbial adenosine triphosphate (ATP) detection system utilizing ATP bioluminescence, which can quantify microbial ATP within 1 h. To apply this technique to antibacterial activity tests, the ATP method should be proved equal or superior to the conventional method. In this study, we conducted disinfectant activity tests comparing the ATP method and the plate count method, using polyhexamethylene biguanide (PHMB) in different concentrations (0-10 ppm) as a model disinfectant against Staphylococcus aureus and Aspergillus brasiliensis. We found that the log reduction of intracellular ATP had a positive correlation with the log reduction of the plate count. Moreover, the ATP method was able to distinguish different conditions of injured microbial cells that were observed using scanning electron microscopy, whereas colony counting detects only culturable cells. The ATP method is thus a rapid and useful alternative to the conventional method in the field of antimicrobial activity testing.

Antimicrobial Susceptibility Testing for Colistin: Extended Application of Novel Quantitative and Morphologic Assay Using Scanning Electron Microscopy.

Background: Colistin (Polymyxin E) has reemerged in the treatment of MDR Gram-negative infections. Traditional Colistin AST methods have long turnaround times and are cumbersome for routine use. We present a SEM-AST technique enabling rapid detection of Colistin resistance through direct observation of morphological and quantitative changes in bacteria exposed to Colistin. Methods: Forty-four Gram-negative reference organisms were chosen based on their Colistin susceptibility profiles. Bacterial suspensions of ∼107 CFU/mL were exposed to Colistin at EUCAST-ECOFF, with controls not exposed, incubated at 37°C, and then sampled at 0, 15, 30, 60, and 120 minutes. Phosphotungstic Acid (PTA) staining was applied, followed by SEM imaging using Hitachi TM4000PlusII-Tabletop-SEM at ×2000, ×5000 and ×7000 magnifications. Bacterial viability analysis was performed for all conditions by quantifying viable and dead organisms based on PTA-staining and morphologic changes. Results: We identified a significant drop in the percentage of viable organisms starting 30 minutes after exposure in susceptible strains, as compared to nonsignificant changes in resistant strains across all tested organisms. The killing effect of Colistin was best observed after 120 minutes of incubation with the antibiotic, with significant changes in morphologic features, including bacterial inflation, fusion, and lysis, observed as early as 30 minutes. Our observation matched the results of the gold standard-based broth microdilution method. Conclusions: We provide an extended application of the proof of concept for the utilization of the SEM-AST assay for Colistin for a number of clinically relevant bacterial species, providing a rapid and reliable susceptibility profile for a critical antibiotic.

Detection of antimicrobial impact on gram-negative bacterial cell envelope based on single-cell imaging by scanning electron microscopy.

Rapid determination of drug efficacy against bacterial pathogens is needed to detect potentially resistant bacteria and allow for more rational use of antimicrobials. As an indicator of the antimicrobial effect for rapid detection, we found changes in image brightness in antimicrobial-affected bacteria by scanning electron microscopy (SEM). The cell envelopes of unaffected bacteria were stained with phosphotungstic acid (PTA), whereas the entire cells of affected bacteria were stained. Since tungsten density increases backscattered electron intensity, brighter bacterial images indicate lethal damage. We propose a simplified method for determining antimicrobial efficacy by detecting damage that occurs immediately after drug administration using tabletop SEM. This method enabled the visualization of microscopic deformations while distinguishing bacterial-cell-envelope damage on gram-negative bacteria due to image-brightness change. Escherichia coli, Acinetobacter baumannii, Enterobacter cloacae, Klebsiella pneumoniae, and Pseudomonas aeruginosa were exposed to imipenem and colistin, which affect the cell envelope through different mechanisms. Classification of single-cell images based on brightness was quantified for approximately 500 bacteria per sample, and the bright images predominated within 5 to 60 min of antimicrobial treatment, depending on the species. Using intracellular PTA staining and characteristic deformations as indicators, it was possible to determine the efficacy of antimicrobials in causing bacterial-cell-envelope damage.

Aggregation of Alzheimer amyloid beta peptide (1-42) on the multivalent sulfonated sugar interface.

The mechanism of amyloidosis of amyloid beta (1-42) (Abeta (1-42)) was investigated by the well-defined glycocluster interface. We prepared monovalent, divalent, and trivalent 6-sulfo-N-acetyl-d-glucosamine (6S-GlcNAc) immobilized substrates. The morphology and secondary structure of Abeta (1-42) aggregates on the substrates were investigated by dynamic-mode AFM and FTIR-RAS. Abeta (1-42) interactions with multivalent sugars were evaluated by surface plasmon resonance, and the cytotoxicity of Abeta (1-42) to HeLa cells was evaluated by MTT assay. Morphological images showed, interestingly, that Abeta (1-42) aggregates had a tendency to form globules rather than fibrils as the valency of 6S-GlcNAc on the substrate was increased. The SPR measurements indicated that this morphological change of Abeta (1-42) was related to the change of binding mode, and the binding mode was dependent on the multivalency of the sugar. Globular Abeta (1-42) was more toxic than fibrillar Abeta (1-42) to HeLa cells. These results suggested that the multivalency of sugars for the amyloidosis of Abeta (1-42) was significant in its morphology and aggregation effects at the surface of the cell membrane mimic.

Sugar microarray via click chemistry: molecular recognition with lectins and amyloid ß (1-42).

Sugar microarrays were fabricated on various substrates via click chemistry. Acetylene-terminated substrates were prepared by forming self-assembled monolayers (SAMs) on a gold substrate with alkyl-disulfide and on silicon, quartz and glass substrates with a silane-coupling reagent. The gold substrates were subjected to surface plasmon resonance measurements, and the quartz and glass substrates were subjected to spectroscopy measurements and optical microscopy observation. The saccharide-immobilized substrate on the gold substrate showed specific interaction with the corresponding lectin, and the saccharides showed inert surface properties to other proteins with a high signal-to-noise ratio. We also focused on the saccharide-protein interaction on protein amyloidosis of Alzheimer amyloid ß. Amyloid ß peptide showed conformation transition on the saccharide-immobilization substrate into a ß-sheet, and fibril formation and amyloid aggregates were found on the specific saccharides.

Fabricating retinal pigment epithelial cell sheets derived from human induced pluripotent stem cells in an automated closed culture system for regenerative medicine.

Regenerative medicine has received a lot of attention as a novel strategy for injuries and diseases that are difficult to cure using current techniques. Cell production, which is vital for regenerative medicine, has undergone remarkable progress via breakthroughs in developmental biology and tissue engineering; currently, cell production requires numerous experimental operators performing manual, small-scale cell cultures. Other major obstacles for cell production and regenerative medicine include the variable quality of products based on the experimental procedure, the skills of operators, the level of labor required for production, and costs. Technological developments are required to overcome this, including automation instead of manual culture. Age-related macular regeneration (AMD) is a refractory ocular disease that causes severe deterioration in central vision due to senescence in the retinal pigment epithelium (RPE). Recently, we performed an autologous transplantation of induced pluripotent stem (iPS) cell-derived RPE cell sheets and started clinical research on allografts from RPE cell suspensions differentiated from iPS cells. The use of regenerative therapies for AMD using iPS cell-derived RPE is expected to become more widespread. In the present study, human iPS cell-derived RPE cells were cultured to form RPE cell sheets using equipment with a closed culture module. The quality of the automated cultured RPE cell sheets was confirmed by comparing their morphological and biological properties with those of manually generated RPE cell sheets. As a result, machine-cultured RPE sheets displayed the same quality as manually cultured RPE sheets, showing that iPS cell-derived RPE cell sheets were successfully cultured by an automated process.

Bioinert surface to protein adsorption with higher generation of dendrimer SAMs.

Interactions between proteins and biomaterial surfaces correlate with many important phenomena in biological systems. Such interactions have been used to develop various artificial biomaterials and applications, in which regulation of non-specific protein adsorption has been achieved with bioinert properties. In this research, we investigated the protein adsorption behavior of polymer brushes of dendrimer self-assembled monolayers (SAMs) with other generations. The surface adsorption properties of proteins with different pI values were examined on gold substrates modified with poly(amidoamine) dendrimer SAMs. The amount of fibrinogen adsorption was greater than that of lysozyme, potentially because of the surface electric charge. However, as the generations increased, protein adsorption decreased regardless of the surface charge, suggesting that protein adsorption was also affected by density of terminal group.