Alkyl anchor-modified artificial viral capsid budding outside-to-inside and inside-to-outside giant vesicles.

The budding of human immunodeficiency virus from an infected host cell is induced by the modification of structural proteins bearing long-chain fatty acids, followed by their anchoring to the cell membrane. Although many model budding systems using giant unilamellar vesicles (GUVs) induced by various stimuli have been developed, constructing an artificial viral budding system of GUVs using only synthesized molecules remains challenging. Herein, we report the construction of an artificial viral capsid budding system from a lipid bilayer of GUV. The C-terminus of the ß-annulus peptide was modified using an octyl chain as an alkyl anchor via a disulfide bond. The self-assembly of the ß-annulus peptide with an octyl chain formed an artificial viral capsid aggregate. The fluorescence imaging and transmission electron microscopy observations revealed that the addition of the tetramethylrhodamine (TMR)-labeled octyl chain-bearing ß-annulus peptide to the outer aqueous phase of GUV induced the budding of the capsid-encapsulated daughter vesicle outside-to-inside the mother GUV. Conversely, the encapsulation of the TMR-labeled octyl chain-bearing ß-annulus peptide in the inner aqueous phase of GUV induced the budding of the capsid-encapsulated daughter vesicle inside-to-outside the mother GUV. Contrarily, the addition of the TMR-labeled ß-annulus peptide to GUV barely induced budding. It was demonstrated that the higher the membrane fluidity of GUV, the more likely budding would be induced by the addition of the alkyl anchor-modified artificial viral capsid. The simple virus-mimicking material developed in this study, which buds off through membrane anchoring, can provide physicochemical insights into the mechanisms of natural viral budding from cells.

Construction of an artificial viral budding system of GUVs using only synthesized molecules remains challenging. This study firstly demonstrates that budding outside-to-inside and inside-to-outside GUVs are induced by addition of alkyl anchor-modified artificial viral capsid.

Antigen/Adjuvant-Displaying Enveloped Viral Replica as a Self-Adjuvanting Anti-Breast-Cancer Vaccine Candidate.

We report a promising cancer vaccine candidate comprising antigen/adjuvant-displaying enveloped viral replica as a novel vaccine platform. The artificial viral capsid, which consists of a self-assembled ß-annulus peptide conjugated with an HER2-derived antigenic CH401 peptide, was enveloped within a lipid bilayer containing the lipidic adjuvant α-GalCer. The use of an artificial viral capsid as a scaffold enabled precise control of its size to ∼100 nm, which is generally considered to be optimal for delivery to lymph nodes. The encapsulation of the anionically charged capsid by a cationic lipid bilayer dramatically improved its stability and converted its surface charge to cationic, enhancing its uptake by dendritic cells. The developed CH401/α-GalCer-displaying enveloped viral replica exhibited remarkable antibody-production activity. This study represents a pioneering example of precise vaccine design through bottom-up construction and opens new avenues for the development of effective vaccines.

Reversible Photocontrol of Microtubule Stability by Spiropyran-Conjugated Tau-Derived Peptides.

Spatiotemporal modulation of microtubules by light has become an important aspect of the biological and nanotechnological applications of microtubules. We previously developed a Tau-derived peptide as a binding unit to the inside of microtubules. Here, we conjugated the Tau-derived peptide to spiropyran, which is reversibly converted to merocyanine by light, as a reversible photocontrol system to stabilize microtubules. Among the synthesized peptides with spiropyran/merocyanine at different positions, several peptides were bound to the inside of microtubules and stabilized the structures of microtubules. The peptide with spiropyran at the N-terminus induced polymerization and stabilization of microtubules, whereas the same peptide with the merocyanine form did not exert these effects. Reversible formation of microtubules/tubulin aggregates was achieved using the peptide with spiropyran conjugated at the N-terminus and irradiation with UV and visible light. Spiropyran-conjugated Tau-derived peptides would be useful for spatiotemporal modulation of microtubule stability through reversible photocontrol of binding.

Anticancer Activity of Reconstituted Ribonuclease S-Decorated Artificial Viral Capsid.

Ribonuclease S (RNase S) is an enzyme that exhibits anticancer activity by degrading RNAs within cancer cells; however, the cellular uptake efficiency is low due to its small molecular size. Here we generated RNase S-decorated artificial viral capsids with a size of 70-170 nm by self-assembly of the ß-annulus-S-peptide followed by reconstitution with S-protein at neutral pH. The RNase S-decorated artificial viral capsids are efficiently taken up by HepG2 cells and exhibit higher RNA degradation activity in cells compared with RNase S alone. Cell viability assays revealed that RNase S-decorated capsids have high anticancer activity comparable to that of standard anticancer drugs.

Artificial Nanocage Formed via Self-Assembly of ß-Annulus Peptide for Delivering Biofunctional Proteins into Cell Interiors.

Nanocarriers that deliver functional proteins to cell interiors are an attractive platform for the intracellular delivery of intact proteins without further modification, with in vivo compatibility. Development of efficient methods for cargo protein encapsulation and release in recipient cell cytosol is needed. Herein, we assess the feasibility of the abovementioned requirements using a protein nanocage (artificial nanocage) without compromising the structure and functions of the original protein and allowing for design flexibility of the surfaces and interiors. The protein nanocage formed via the self-assembly of the ß-annulus peptide (24-amino acid peptide) in water was used as a model framework. The nitrilotriacetic acid moiety was displayed on the nanocage lumen for effective encapsulation of hexahistidine-tagged proteins in the presence of Ni2+, and the amphiphilic cationic lytic peptide HAad was displayed on a nanocage surface to attain cell permeability. Successful intracellular delivery of cargo proteins and targeting of cytosolic proteins by a nanobody were achieved, indicating the validity of the approach employed in this study.

Mechanistic Studies for the Rational Design of Multivalent Glycodendrimers.

We have synthesized B-antigen-displaying dendrimers (16-mers) with different sizes and evaluated their affinity to their IgM antibody in order to investigate which design features lead to effective multivalency. Unexpectedly, the smallest dendrimer, which cannot chelate the multiple binding sites of IgM, clearly exhibited multivalency, together with an affinity similar to or higher than those of the larger dendrimers. These results indicate that the statistical rebinding model, which involves the rapid exchange of clustered glycans, significantly contributes to the multivalency of glycodendrimers. Namely, in the design of glycodendrimers, high-density glycan presentation to enhance statistical rebinding should be considered in addition to the ability to chelate multiple binding sites. This notion stands in contrast to the currently prevailing scientific consensus, which prioritizes the chelation model. This study thus provides new and important guidelines for molecular design of glycodendrimers.

Magnetic Force-Induced Alignment of Microtubules by Encapsulation of CoPt Nanoparticles Using a Tau-Derived Peptide.

Construction of magnetotactic materials is a significant challenge in nanotechnology applications such as nanodevices and nanotransportation. Artificial magnetotactic materials can be designed from magnetotactic bacteria because these bacteria use magnetic nanoparticles for aligning with and moving within magnetic fields. Microtubules are attractive scaffolds to construct magnetotactic materials because of their intrinsic motility. Nonetheless, it is challenging to magnetically control their orientation while retaining their motility by conjugating magnetic nanoparticles on their outer surface. Here we solve the issue by encapsulating magnetic cobalt-platinum nanoparticles inside microtubules using our developed Tau-derived peptide that binds to their internal pockets. The in situ growth of cobalt-platinum nanoparticles resulted in the formation of a linear-chain assembly of nanoparticles inside the microtubules. The magnetic microtubules significantly aligned with a high order parameter (0.71) along the weak magnetic field (0.37 T) and showed increased motility. This work provides a new concept for designing magnetotactic materials.

A Photoresponsive Artificial Viral Capsid Self-Assembled from an Azobenzene-Containing ß-Annulus Peptide.

Photoinduced structural changes in peptides can dynamically control the formation and dissociation of supramolecular peptide materials. However, the existence of photoresponsive viral capsids in nature remains unknown. In this study, we constructed an artificial viral capsid possessing a photochromic azobenzene moiety on the peptide backbone. An azobenzene-containing ß-annulus peptide derived from the tomato bushy stunt virus was prepared through solid-phase synthesis using Fmoc-3-[(3-aminomethyl)-phenylazo]phenylacetic acid. The azobenzene-containing ß-annulus (ß-Annulus-Azo) peptide showed a reversible trans/cis isomerization property. The ß-annulus-azo peptide self-assembled at 25 µM into capsids with the diameters of 30-50 nm before UV irradiation (trans-form rich), whereas micrometer-sized aggregates were formed after UV irradiation (cis-form rich). The artificial viral capsid possessing azobenzene facilitated the encapsulation of fluorescent-labeled dextrans and their photoinduced release from the capsid.

Fluorescence Correlation Spectroscopy Analysis of Effect of Molecular Crowding on Self-Assembly of ß-Annulus Peptide into Artificial Viral Capsid.

Recent progress in the de novo design of self-assembling peptides has enabled the construction of peptide-based viral capsids. Previously, we demonstrated that 24-mer ß-annulus peptides from tomato bushy stunt virus spontaneously self-assemble into an artificial viral capsid. Here we propose to use the artificial viral capsid through the self-assembly of ß-annulus peptide as a simple model to analyze the effect of molecular crowding environment on the formation process of viral capsid. Artificial viral capsids formed by co-assembly of fluorescent-labelled and unmodified ß-annulus peptides in dilute aqueous solutions and under molecular crowding conditions were analyzed using fluorescence correlation spectroscopy (FCS). The apparent particle size and the dissociation constant (Kd) of the assemblies decreased with increasing concentration of the molecular crowding agent, i.e., polyethylene glycol (PEG). This is the first successful in situ analysis of self-assembling process of artificial viral capsid under molecular crowding conditions.

Morphologically Diverse Micro- and Macrostructures Created via Solvent Evaporation-Induced Assembly of Fluorescent Spherical Particles in the Presence of Polyethylene Glycol Derivatives.

The creation of fluorescent micro- and macrostructures with the desired morphologies and sizes is of considerable importance due to their intrinsic functions and performance. However, it is still challenging to modulate the morphology of fluorescent organic materials and to obtain insight into the factors governing the morphological evolution. We present a facile bottom-up approach to constructing diverse micro- and macrostructures by connecting fluorescent spherical particles (SPs), which are generated via the spherical assembly of photoisomerizable azobenzene-based propeller-shaped chromophores, only with the help of commercially available polyethylene glycol (PEG) derivatives. Without any extra additives, solvent evaporation created a slow morphological evolution of the SPs from short linear chains (with a length of a few micrometers) to larger, interconnected networks and sheet structures (ranging from tens to >100 µm) at the air-liquid interface. Their morphologies and sizes were significantly dependent on the fraction and length of the PEG. Our experimental results suggest that noncovalent interactions (such as hydrophobic forces and hydrogen bonding) between the amphiphilic PEG chains and the relatively hydrophobic SPs were weak in aqueous solutions, but play a crucial role in creating the morphologically diverse micro- and macrostructures. Moreover, short-term irradiation with visible light caused fast morphological crumpling and fluorescence switching of the obtained structures.

Construction of Ribonuclease-Decorated Artificial Virus-like Capsid by Peptide Self-assembly.

Artificial virus-like capsids decorated with ribonuclease S (RNase S) on their exterior were constructed by the self-assembly of ß-annulus-S-peptide and the interaction between S-peptide moiety and S-protein. The ß-annulus-S-peptide was synthesized by native chemical ligation of ß-annulus-SBz peptide with Cys-containing S-peptide that self-assembled into artificial virus-like capsids of approximately 47 nm in size. Reconstruction of RNase S on the artificial virus-like capsids afforded spherical assembly attached small spheres on the surface, which retained ribonuclease activity.

Immunological Evaluation of Co-Assembling a Lipidated Peptide Antigen and Lipophilic Adjuvants: Self-Adjuvanting Anti-Breast-Cancer Vaccine Candidates.

Co-assembling vaccines composed of a lipidated HER2-derived antigenic CH401 peptide and either a lipophilic adjuvant, Pam3 CSK4 , α-GalCer, or lipid A 506, were evaluated as breast cancer vaccine candidates. This vaccine design was aimed to inherit both antigen multivalency and antigen-specific immunostimulation properties, observed in reported self-adjuvanting vaccine candidates, by using self-assembly and adjuvant-conjugated antigens. Under vaccination concentrations, respective lipophilic adjuvants underwent co-assembly with lipidated CH401, which boosted the anti-CH401 IgG and IgM production. In particular, α-GalCer was responsible for the most significant immune activation. Therefore, the newly developed vaccine design enabled the optimization of adjuvants against the antigenic CH401 peptide in a simple preparatory manner. Overall, the co-assembling vaccine design opens the door for efficient and practical self-adjuvanting vaccine development.

Artificial Viral Capsid Dressed Up with Human Serum Albumin.

Capsid of tomato bushy stunt virus consists of an outer coat protein shell decorated on an internal skeleton comprising a ß-annulus motif. We mimicked this capsid structure with our artificial viral capsid dressed up with protein. We synthesized the ß-annulus peptide bearing a Cys at the C-terminal side and linked it with Cys34 of the human serum albumin (HSA) via a bismaleimide linker. The ß-annulus peptide-HSA conjugate self-assembled into spherical structures of a 50-70 nm size range in the Tris-HCl buffer, with the ζ-potential of assemblies of such conjugate revealing that HSA proteins were displayed on the outer surface of the artificial viral capsid. Interestingly, the critical aggregation concentration (CAC) of the conjugate in the Tris-HCl buffer at 25 °C was approximately 0.01 µM, or 1/2500 lower than that of the unmodified ß-annulus peptides, suggesting that the artificial viral capsids were stabilized via HSA modification. The present strategy of constructing protein nanocapsule by self-assembly of a ß-annulus peptide-protein conjugate is simpler than that of previously reported protein nanocapsules.

Hybrid Soft Nanomaterials Composed of DNA Microspheres and Supramolecular Nanostructures of Semi-artificial Glycopeptides.

Aqueous hybrid soft nanomaterials consisting of plural supramolecular architectures with a high degree of segregation (orthogonal coexistence) and precise hierarchy at the nano- and microscales, which are reminiscent of complex biomolecular systems, have attracted increasing attention. Remarkable progress has been witnessed in the construction of DNA nanostructures obtained by rational sequence design and supramolecular nanostructures of peptide derivatives through self-assembly under aqueous conditions. However, orthogonal self-assembly of DNA nanostructures and supramolecular nanostructures of peptide derivatives in a single medium has not yet been explored in detail. In this study, DNA microspheres, which can be obtained from three single-stranded DNAs, and three different supramolecular nanostructures (helical nanofibers, straight nanoribbons, and flowerlike microaggregates) of semi-artificial glycopeptides were simultaneously constructed in a single medium by a simple thermal annealing process, which gives rise to hybrid soft nanomaterials. Fluorescence imaging with selective staining of each supramolecular nanostructure uncovered the orthogonal coexistence of these structures with only marginal impact on their morphology. Additionally, the biostimuli-responsive degradation propensity of each supramolecular architecture is retained, and this may allow the construction of active soft nanomaterials exhibiting intelligent biofunctions.

Peptide Nanomaterials Designed from Natural Supramolecular Systems.

Natural supramolecular assemblies exhibit unique structural and functional properties that have been optimized over the course of evolution. Inspired by these natural systems, various bio-nanomaterials have been developed using peptides, proteins, and nucleic acids as components. Peptides are attractive building blocks because they enable the important domains of natural protein assemblies to be isolated and optimized while retaining the original structures and functions. Furthermore, the peptide subunits can be conjugated with exogenous molecules such as peptides, proteins, nucleic acids, and metal nanoparticles to generate advanced functions. In this personal account, we summarize recent progress in the construction of peptide-based nanomaterial designed from natural supramolecular systems, including (1) artificial viral capsids, (2) self-assembled nanofibers, and (3) protein-binding motifs. The peptides inspired by nature should provide new design principles for bio-nanomaterials.

Molecular Encapsulation Inside Microtubules Based on Tau-Derived Peptides.

Microtubules are cytoskeletal filaments that serve as attractive scaffolds for developing nanomaterials and nanodevices because of their unique structural properties. The functionalization of the outer surface of microtubules has been established for this purpose. However, no attempts have been made to encapsulate molecules inside microtubules with 15 nm inner diameter. The encapsulation of various molecular cargos inside microtubules constitutes a new concept for nanodevice and nanocarrier applications of microtubules. Here, we developed peptide motifs for binding to the inner surface of microtubules, based on a repeat domain of the microtubule-associated protein Tau. One of the four Tau-derived peptides, 2N , binds to a taxol binding pocket of ß-tubulin located inside microtubules by preincubation with tubulin dimer and subsequent polymerization of the peptide-tubulin complex. By conjugation of 2N to gold nanoparticles, encapsulation of gold nanoparticles inside microtubules was achieved. The methodology for molecular encapsulation inside microtubules by the Tau-derived peptide is expected to advance the development of microtubule-based nanomaterials and nanodevices.

Self-assembled artificial viral capsids bearing coiled-coils at the surface.

In order to construct artificial viral capsids bearing complementary dimeric coiled-coils on the surface, a ß-annulus peptide bearing a coiled-coil forming sequence at the C-terminus (ß-annulus-coiled-coil-B) was synthesized by a native chemical ligation of a ß-annulus-SBn peptide with a Cys-containing coiled-coil-B peptide. Dynamic light scattering (DLS) measurements and transmission electron microscopy (TEM) images revealed that the ß-annulus-coiled-coil-B peptide self-assembled into spherical structures of about 50 nm in 10 mM Tris-HCl buffer. Circular dichroism (CD) spectra indicated the formation of the complementary coiled-coil structure on the spherical assemblies. Addition of 0.25 equivalent of the complementary coiled-coil-A peptide to the ß-annulus-coiled-coil-B peptide showed the formation of spherical assemblies of 46 ± 14 nm with grains of 5 nm at the surface, whereas addition of 1 equivalent of the complementary coiled-coil-A peptide generated fibrous assemblies.

DNA-modified artificial viral capsids self-assembled from DNA-conjugated ß-annulus peptide.

ß-Annulus peptides from tomato bushy stunt virus conjugated with DNAs (dA20 and dT20 ) at the C-terminal were synthesized. The DNA-modified ß-annulus peptides self-assembled into artificial viral capsids with sizes of 45-160 nm. ζ-Potential measurements revealed that the DNAs were coated on the surface of artificial viral capsids. Fluorescence assays indicated that the DNAs on the artificial viral capsids were partially hybridized with the complementary DNAs. Moreover, the DNA-modified artificial viral capsids formed aggregates by adding complementary polynucleotides. Copyright © 2017 European Peptide Society and John Wiley & Sons, Ltd.

Peptide nanospheres self-assembled from a modified ß-annulus peptide of Sesbania mosaic virus.

A novel ß-annulus peptide of Sesbania mosaic virus bearing an FKFE sequence at the C terminus was synthesized, and its self-assembling behavior in water was investigated. Dynamic light scattering and transmission electron microscopy showed that the ß-annulus peptide bearing an FKFE sequence self-assembled into approximately 30 nm nanospheres in water at pH 3.8, whereas the ß-annulus peptide without the FKFE sequence afforded only irregular aggregates. The peptide nanospheres possessed a definite critical aggregation concentration (CAC = 26 µM), above which the size of nanospheres were nearly unaffected by the peptide concentration. The formation of peptide nanospheres was significantly affected by pH; the peptide did not form any assemblies at pH 2.2, whereas larger aggregates were formed at pH 6.4-11.6. © 2015 Wiley Periodicals, Inc. Biopolymers (Pept Sci) 106: 470-475, 2016.