RESUMEN
The design of novel quaternary materials can be a chemically challenging endeavor. Here, we show that a new tolerance factor, we herein call the quaternary tolerance factor (QTF), akin to the Goldschmidt ratio, can be applied to a homologous series of quaternary materials to aid in the prediction of structural stability in new phases. Single crystals of nine new members of the A2Ln4Cu2nQ7+n homologous series were synthesized (A = K, Rb, Cs, Ln = Sm, Gd, Tb, Dy, Er, Yb, Lu, Q = S, Se) for n = 1, 2, and 3 using a reactive KCl flux method as the sole potassium source. This homologous series is notable for being the largest of all known chalcogenide homologies and thus serves as a case study for understanding quaternary structural relationships. We present a thorough structural analysis of these newly synthesized compounds and place them in the context of all previously reported members of the homologous series. We then report a generalizable tolerance factor capable of predicting structurally interrelated quaternary materials from an a priori sphere-packing approach for the design of new materials.
RESUMEN
A new misfit layered compound with the stoichiometry (EuS)1+δ(NbSe2)2 (δ ≈ 0.13) has been successfully synthesized. High-resolution transmission electron microscopy and powder X-ray diffraction confirm the misfit structure with (EuS)-(EuS) spacing of 18.30(1) Å. Magnetization, electrical resistivity, heat capacity, and thermal transport measurements show that the material is a heavily doped semiconductor or poor metal with a low thermal conductivity of â¼1 W/m K and an antiferromagnetic ordering transition at TN = 4.7 K. In contrast to the parent materials, the misfit is neither ferromagnetic nor superconducting down to T = 0.4 K. We find evidence of a field-driven transition to a ferromagnetic state due to reorientation of ferromagnetic EuS layers at µoH = 0.5 T at T = 2 K.
RESUMEN
Time-reversal invariance (TRS) and inversion symmetry (IS) are responsible for the topological band structure in Dirac semimetals (DSMs). These symmetries can be broken by applying an external magnetic or electric field, resulting in fundamental changes to the ground state Hamiltonian and a topological phase transition. We probe these changes using universal conductance fluctuations (UCF) in the prototypical DSM, Cd3As2. With increasing magnetic field, the magnitude of the UCF decreases by a factor of 2, in agreement with numerical calculations of the effect of broken TRS. In contrast, the magnitude of the UCF increases monotonically when the chemical potential is gated away from the charge neutrality point. We attribute this to Fermi surface anisotropy rather than broken IS. The concurrence between experimental data and theory provides unequivocal evidence that UCF are the dominant source of fluctuations and offers a general methodology for probing broken-symmetry effects in topological quantum materials.
RESUMEN
Electrons in solids often adopt complex patterns of chemical bonding driven by the competition between energy gains from covalency and delocalization, and energy costs of double occupation to satisfy Pauli exclusion, with multiple intermediate states in the transition between highly localized, and magnetic, and delocalized, and nonmagnetic limits. Herein, we report a chemical pressure-driven transition from a proper Mn magnetic ordering phase transition to a Mn magnetic phase crossover in EuMn2P2 the limiting end member of the EuMn2X2 (X = Sb, As, P) family of layered materials. This loss of a magnetic ordering occurs despite EuMn2P2 remaining an insulator at all temperatures, and with a phase transition to long-range Eu antiferromagnetic order at TN ≈ 17 K. The absence of a Mn magnetic phase transition contrasts with the formation of long-range Mn order at T ≈ 130 K in isoelectronic EuMn2Sb2 and EuMn2As2. Temperature-dependent specific heat and 31P NMR measurements provide evidence for the development of short-range Mn magnetic correlations from T ≈ 250-100 K, interpreted as a precursor to covalent bond formation. Density functional theory calculations demonstrate an unusual sensitivity of the band structure to the details of the imposed Mn and Eu magnetic order, with an antiferromagnetic Mn arrangement required to recapitulate an insulating state. Our results imply a picture in which long-range Mn magnetic order is suppressed by chemical pressure, but that antiferromagnetic correlations persist, narrowing bands and producing an insulating state.
RESUMEN
Quantum spin liquids are an exciting playground for exotic physical phenomena and emergent many-body quantum states. The realization and discovery of quantum spin liquid candidate materials and associated phenomena lie at the intersection of solid-state chemistry, condensed matter physics, and materials science and engineering. In this review, we provide the current status of the crystal chemistry, synthetic techniques, physical properties, and research methods in the field of quantum spin liquids. We highlight a number of specific quantum spin liquid candidate materials and their structure-property relationships, elucidating their fascinating behavior and connecting it to the intricacies of their structures. Furthermore, we share our thoughts on defects and their inevitable presence in materials, of which quantum spin liquids are no exception, which can complicate the interpretation of characterization of these materials, and urge the community to extend their attention to materials preparation and data analysis, cognizant of the impact of defects. This review was written with the intention of providing guidance on improving the materials design and growth of quantum spin liquids, and to paint a picture of the beauty of the underlying chemistry of this exciting class of materials.
RESUMEN
Metal-organic frameworks (MOFs) provide exceptional chemical tunability and have recently been demonstrated to exhibit electrical conductivity and related functional electronic properties. The kagomé lattice is a fruitful source of novel physical states of matter, including the quantum spin liquid (in insulators) and Dirac fermions (in metals). Small-bandgap kagomé materials have the potential to bridge quantum spin liquid states and exhibit phenomena such as superconductivity but remain exceptionally rare. Here we report a structural, thermodynamic, and transport study of the two-dimensional kagomé metal-organic frameworks Ni3(HIB)2 and Cu3(HIB)2 (HIB = hexaiminobenzene). Magnetization measurements yield Curie constants of 0.989 emu K (mol Ni)-1 Oe-1 and 0.371 emu K (mol Cu)-1 Oe-1, respectively, close to the values expected for ideal S = 1 Ni2+ and S = 1/2 Cu2+. Weiss temperatures of -10.6 and -14.3 K indicate net weak mean field antiferromagnetic interactions between ions. Electrical transport measurements reveal that both materials are semiconducting, with gaps (Eg) of 22.2 and 103 meV, respectively. Specific heat measurements reveal a large T-linear contribution γ of 148(4) mJ mol-fu-1 K-2 in Ni3(HIB)2 with only a gradual upturn below â¼5 K and no evidence of a phase transition to an ordered state down to 0.1 K. Cu3(HIB)2 also lacks evidence of a phase transition above 0.1 K, with a substantial, field-dependent, magnetic contribution below â¼5 K. Despite them being superficially in agreement with the expectations of magnetic frustration and spin liquid physics, we ascribe these observations to the stacking faults found from a detailed analysis of synchrotron X-ray diffraction data. At the same time, our results demonstrate that these MOFs exhibit localized magnetism with simultaneous proximity to a metallic state, thus opening up opportunities to explore the connection between the insulating and metallic ground states of kagomé materials in a highly tunable chemical platform.
RESUMEN
Combining neutron diffraction with pair distribution function analysis, we have uncovered hidden reduced symmetry in the correlated metallic d1 perovskite, SrVO3. Specifically, we show that both the local and global structures are better described using a GdFeO3 distorted (orthorhombic) model as opposed to the ideal cubic ABO3 perovskite type. Recent reports of imaginary phonon frequencies in the density functional theory (DFT)-calculated phonon dispersion for cubic SrVO3 suggest a possible origin of this observed non-cubicity. Namely, the imaginary frequencies computed could indicate that the cubic crystal structure is unstable at T = 0 K. However, our DFT calculations provide compelling evidence that point defects in the form of oxygen vacancies, and not an observable symmetry breaking associated with calculated imaginary frequencies, primarily result in the observed non-cubicity of SrVO3. These experimental and computational results are broadly impactful because they reach into the thin-film and theoretical communities who have shown that SrVO3 is a technologically viable transparent conducting oxide material and have used SrVO3 to develop theoretical methods, respectively.
RESUMEN
Transition-metal oxynitrides have a variety of functions such as visible light-responsive catalysts and dielectric materials, but acquiring single crystals necessary to understand inherent properties is difficult and is limited to relatively small sizes (<10 µm) because they easily decompose at high temperatures. Here, we have succeeded in growing platelet single crystals of TaON with a typical size of 50 × 100 × 10 µm3 under a high pressure and high temperature (6 GPa and 1400 °C) using a LiCl flux. Such a harsh condition, in contrast to powder samples synthesized under mild conditions, resulted in the introduction of a large amount of oxygen vacancies (x = 0.06 in TaO1-xN) into the crystal, providing a metallic behavior with a large anisotropy of ρc/ρab â¼ 103. Low-temperature oxygen annealing allows for a single-crystal-to-single-crystal transformation to obtain fully oxidized TaON (yellow) crystals. Needle-like crystals can be obtained when NH4Cl is used as a flux. Furthermore, black Hf2ON2 single crystals are also grown, suggesting that the high-pressure flux method is widely applicable to other transition-metal oxynitrides, with extensive carrier control.
RESUMEN
Oxide perovskites offer improved stability compared to halide perovskite compounds for optoelectronic applications. Here, we report the first gold-containing double perovskite, Ba2AuIO6, and compare it to Ba2AgIO6 and Ba2NaIO6. Ba2AuIO6 and Ba2AgIO6 exhibit a monoclinic distortion from the cubic perovskite structure possessed by Ba2NaIO6 and have similar lattice constants despite the nominally larger size of Au+ compared to Ag+. Ba2AgIO6 shows photoluminescence (PL) at 2.10 eV, and Ba2AuIO6 exhibits PL at 1.30 and 1.47 eV. As prepared, both compounds appear stable under visible light at room temperature but decompose when subjected to gentle heating followed by illumination. Our data suggest that this behavior is due to the presence of -OH defects in the crystal structures. This discovery provides a new route to semiconductors with a near-IR band gap and identifies engineering challenges that must be addressed to use oxide perovskites for optoelectronic devices.
RESUMEN
A family of high entropy oxides with the formula Mg2Ta3Ln3O14 (Ln = La, Pr, Nd, Sm, Eu, Gd) has been discovered and synthesized. Single crystals, 5 mm OD × 2.5 cm, for Ln = Nd have been grown using the laser optical floating zone technique. Crystal orientations are confirmed by Laue diffraction, and structure solutions were obtained via single crystal X-ray diffraction. The structure is found to be a partially disordered pyrochlore, space group Fd-3m, fractional chemical formula (Mg0.25Nd0.75)2(Mg0.25Ta0.75)2O7. Magnetization measurements indicate ordinary paramagnetic behavior in all compounds down to T = 2 K, except in the Eu variant which possesses Van Vleck paramagnetism. Specific heat measurements for Ln = Nd shows no phase transitions between T = 300 and 2 K. We demonstrate the ability to prepare magnetically disordered materials by substitution of Mg with Ni, Mn, and Co, demonstrating the flexibility of this family in accommodating defects. The stabilization of these compounds could be due to the entropy gain associated with defects, showcasing a "materials by design" approach by using disorder to stabilize novel magnetic and optical materials. Our work also demonstrates the feasibility of preparing high entropy oxides in single crystalline form.
RESUMEN
Samarium hexaboride is an anomaly, having many exotic and seemingly mutually incompatible properties. It was proposed to be a mixed-valent semiconductor, and later a topological Kondo insulator, and yet has a Fermi surface despite being an insulator. We propose a new and unified understanding of SmB6 centered on the hitherto unrecognized dynamical bonding effect: the coexistence of two Sm-B bonding modes within SmB6 , corresponding to different oxidation states of the Sm. The mixed valency arises in SmB6 from thermal population of these distinct minima enabled by motion of B. Our model simultaneously explains the thermal valence fluctuations, appearance of magnetic Fermi surface, excess entropy at low temperatures, pressure-induced phase transitions, and related features in Raman spectra and their unexpected dependence on temperature and boron isotope.
RESUMEN
Ages of history are defined by the underlying materials that promoted human development: stone, bronze, and iron ages. Since the middle of the last century, humanity has lived in a silicon age, where the development of the transistor ushered in new technologies previously thought inconceivable. But as technology has advanced, so have the requirements for new materials to sustain increasing physical demands. The field of solid state chemistry is dedicated to the discovery of new materials and phenomena, and though most materials discoveries in history have been through serendipity rather than careful reaction design, the last few decades have seen an increase in the number of materials discovered through a consideration of chemical reaction kinetics and thermodynamics. Materials by design have changed the way solid state chemists approach the synthesis of possible materials with interesting and useful properties. Unlike other chemistry subfields such as organic chemistry and biochemistry, solid state chemistry does not currently benefit from a toolbox of reactions that can allow for the synthesis of any arbitrary material. The diversity and complexity of the solid state phase space likely inhibits chemists from ever having such a toolbox. However, a thorough understanding of the various synthetic techniques involved in the synthesis of stable and metastable solids may be realized through an understanding of the reaction kinetics and thermodynamics. In the Account, we review the common synthesis techniques involved in the formation of metastable materials and break down their underlying chemistry to the simplest reaction mechanisms involved. The synthesis reactions of most metastable materials can be understood through these three reaction driving parameters, which include the exploitation of Le Chatelier's principle, thermo-kinetic reaction coupling, and lowering the activation energy of formation of the metastable product, and we identify several materials whose syntheses are described either by one or a combination of these driving parameters. We identify what exists at the frontier of materials discovery by design, including novel applications of supercritical fluids for tuning between "gas" and "solvent"-like environments. While conventional solvation requires changes in either the temperature or composition of the system, supercritical fluid solvation requires only changes in the fluid density, which opens up the possibilities for the synthesis of new materials. Most importantly, however, we look toward the future of materials synthesis by design and see that it must be a collaborative one. At present, chemists design materials using knowledge about chemical structure and reactivity but often target specific materials with very specific properties. In contrast, computational chemists perform calculations on millions of different elemental combinations and find many candidates of possible materials with interesting properties, though most of these are not realizable synthetically due to limitations in reactivity, kinetics, or thermodynamics. Synthetic harmony can be achieved through active collaboration and communication between these two subfields of chemistry, such that new calculations can incorporate complete knowledge about reaction kinetics and thermodynamics, and new syntheses target computationally predicted materials derived from an understanding of mapped reaction landscapes.
RESUMEN
Kagomé lattice magnets have emerged as a versatile platform on which to discover and explore the underlying physics of quantum-spin liquids and related states of matter, although experimental examples of ideal kagomé lattices remain rare. Here we report that Na2Ti3Cl8 is an ideal realization of an insulating S = 1 kagomé magnet. This material undergoes a discrete two-step trimerization upon cooling, transforming from a centrosymmetric, paramagnetic high-temperature (HT) R3m phase to noncentrosymmetric, polar, and trimerized intermediate- (IT) and low-temperature (LT) R3m phases via two successive first-order phase transitions. Symmetry mode decomposition analysis shows that trimerization requires activation of the proper polar order parameter Γ2- and that this mode becomes active at the HT â IT phase transition. The magnitude of this order parameter approximately doubles at the IT â LT transition, with possible activation of a second polar mode, corresponding to Na2 and Ti3Cl8 displacing layers toward each other, at the IT â LT transition. Specific heat measurements reveal comparable changes in entropy between the LT â IT transition, 18.6(1.0) J (mol of f.u.)-1 K-1, and the IT â LT transition, 16.8(1.0) J (mol of f.u.)-1 K-1, demonstrating loss of the magnetic degrees of freedom and constraining possible models for the magnetic and electronic structures of the IT and LT phases. Thus, Na2Ti3Cl8 demonstrates a novel mechanism to obtain polar structures driven by geometrically frustrated lattices and metal-metal bonding and highlights the rich physics arising from kagomé lattice materials.
RESUMEN
Three new salt inclusion compounds (Cs X)Cu5O2(PO4)2 ( X = Cl, Br, I), phosphate analogues of the kagomé mineral averievite, are reported. Their crystal structures are composed of trigonal networks of corner-sharing OCu4 anion-centered tetrahedra, forming capped-kagomé planes, which can also be regarded as two-dimensional slices along the [111] direction of a pyrochlore lattice. Magnetization and heat capacity measurements reveal strong geometric frustration of this network and complex magnetic behavior. X-ray and neutron diffraction studies show that all three compounds undergo a trigonal-to-monoclinic phase transition upon cooling, with a first-order phase transition seen in CsBr and CsI analogues. Along with the previously reported (CsCl)Cu5O2(VO4)2, these three new compounds belong to a large family of OCu4-based networks, which are a playground for studying frustrated quantum magnetism.
RESUMEN
We have identified six new 4d4 and 4d5 compounds with isolated RuCl6 octahedra, with formulas (HMA)4RuCl6·Cl (1; MA = methylamine), (HGly)4RuCl6·Cl (2; gly = glycine), (HGly)3RuCl6·2H2O (3), (NH4)2RuCl6 (4), (HPy)2RuCl6 (5; py = pyridine), and H2(4,4'-bpy)RuCl6 (6; 4,4'-bpy = 4,4'-bipyridine). We find that the temperature-dependent magnetization is well described by single-ion physics in the presence of spin-orbit coupling and negligible superexchange interactions. Further, we find that many compounds in the literature are also well described by single-ion physics, and our results demonstrate the importance of considering single-ion physics when evaluating candidate geometric frustrated magnets in the presence of spin-orbit coupling.
RESUMEN
Among oxide compounds with direct metal-metal bonding, the Y5Mo2O12 (A5B2O12) structural family of compounds has a particularly intriguing low-dimensional structure due to the presence of bioctahedral B2O10 dimers arranged in one-dimensional edge-sharing chains along the direction of the metal-metal bonds. Furthermore, these compounds can have a local magnetic moment due to the noninteger oxidation state (+4.5) of the transition metal, in contrast to the conspicuous lack of a local moment that is commonly observed when oxide compounds with direct metal-metal bonding have integer oxidation states resulting from the lifting of orbital degeneracy typically induced by the metal-metal bonding. Although a monoclinic C2/m structure has been previously proposed for Ln5Mo2O12 (Ln = La-Lu and Y) members of this family based on prior single crystal diffraction data, it is found that this structural model misses many important structural features. On the basis of synchrotron powder diffraction data, it is shown that the C2/m monoclinic unit cell represents a superstructure relative to a previously unrecognized orthorhombic Immm subcell and that the superstructure derives from the ordering of interchangeable Mo2O10 and LaO6 building blocks. The superstructure for this reason is typically highly faulted, as evidenced by the increased breadth of superstructure diffraction peaks associated with a coherence length of 1-2 nm in the c* direction. Finally, it is shown that oxygen vacancies can occur when Ln = La, producing an oxygen deficient stoichiometry of La5Mo2O11.55 and an approximately 10-fold reduction in the number of unpaired electrons due to the reduction of the average Mo valence from +4.5 to +4.05, a result confirmed by magnetic susceptibility measurements. This represents the first observation of oxygen vacancies in this family of compounds and provides an important means of continuously tuning the magnetic interactions within the one-dimensional octahedral chains of this system.
RESUMEN
The nonheme iron complex, [Fe(NO)(N3PyS)]BF4, is a rare example of an {FeNO}(7) species that exhibits spin-crossover behavior. The comparison of X-ray crystallographic studies at low and high temperatures and variable-temperature magnetic susceptibility measurements show that a low-spin S = 1/2 ground state is populated at 0-150 K, while both low-spin S = 1/2 and high-spin S = 3/2 states are populated at T > 150 K. These results explain the observation of two N-O vibrational modes at 1737 and 1649 cm(-1) in CD3CN for [Fe(NO)(N3PyS)]BF4 at room temperature. This {FeNO}(7) complex reacts with dioxygen upon photoirradiation with visible light in acetonitrile to generate a thiolate-ligated, nonheme iron(III)-nitro complex, [Fe(III)(NO2)(N3PyS)](+), which was characterized by EPR, FTIR, UV-vis, and CSI-MS. Isotope labeling studies, coupled with FTIR and CSI-MS, show that one O atom from O2 is incorporated in the Fe(III)-NO2 product. The O2 reactivity of [Fe(NO)(N3PyS)]BF4 in methanol is dramatically different from CH3CN, leading exclusively to sulfur-based oxidation, as opposed to NO· oxidation. A mechanism is proposed for the NO· oxidation reaction that involves formation of both Fe(III)-superoxo and Fe(III)-peroxynitrite intermediates and takes into account the experimental observations. The stability of the Fe(III)-nitrite complex is limited, and decay of [Fe(III)(NO2)(N3PyS)](+) leads to {FeNO}(7) species and sulfur oxygenated products. This work demonstrates that a single mononuclear, thiolate-ligated nonheme {FeNO}(7) complex can exhibit reactivity related to both nitric oxide dioxygenase (NOD) and nitrite reductase (NiR) activity. The presence of the thiolate donor is critical to both pathways, and mechanistic insights into these biologically relevant processes are presented.
Asunto(s)
Complejos de Coordinación/química , Compuestos Férricos/química , Óxido Nítrico/química , Oxígeno/química , Compuestos de Sulfhidrilo/química , Espectroscopía de Resonancia por Spin del Electrón , Procesos Fotoquímicos , Difracción de Rayos XRESUMEN
The synthesis and physical properties of two new and one known Ir-Sn-Se compound are reported. Their crystal structures are elucidated with transmission electron microscopy and powder X-ray diffraction. IrSn0.45Se1.55 is a pyrite phase which consists of tilted corner-sharing IrX6 octahedra with randomly distributed (Sn-Se)(4-) and (Se-Se)(2-) dimers. Ir2Sn3Se3 is a known trigonally distorted skutterudite that consists of cooperatively tilted corner-sharing IrSn3Se3 octahedra with ordered (Sn-Se)2(4-) tetramers. Ir2SnSe5 is a layered, distorted ß-MnO2 (pyrolusite) structure consisting of a double IrSe6 octrahedral row, corner sharing in the a direction and edge sharing in the b direction. This distorted pyrolusite contains (Se-Se)(2-) dimers and Se(2-) anions, and each double row is "capped" with a (Sn-Se)n polymeric chain. Resistivity, specific heat, and magnetization measurements show that all three have insulating and diamagnetic behavior, indicative of low-spin 5d(6) Ir(3+). Electronic structure calculations on Ir2Sn3Se3 show a single, spherical, nonspin-orbit split valence band and suggest that Ir2Sn3Se3 is topologically nontrivial under tensile strain due to inversion of Ir-d and Se-p states.
RESUMEN
The synthesis and physical properties of the K(1-x)Ir4O8 (0 ≤ x ≤ 0.7) solid solution are reported. The structure of KIr4O8, solved with single-crystal X-ray diffraction at T = 110 K, is found to be tetragonal, space group I4/m, with a = 10.0492(3) Å and c = 3.14959(13) Å. A highly anisotropic displacement parameter is found for the potassium cation. Density functional theory calculations suggest that this anisotropy is due to a competition between atomic size and bond valence. KIr4O8 has a significant electronic contribution to the specific heat, γ = 13.9 mJ mol-Ir(-1) K(-2), indicating an effective carrier mass of m*/me ≈ 10. Further, there is a magnetic-field-dependent upturn in the specific heat at T < 3 K, suggestive of a magnetically sensitive phase transition below T < 1.8 K. Resistivity and magnetization measurements show that both end-members of the solid solution, KIr4O8 and K(1-x)Ir4O8 (x ≈ 0.7), are metallic, with no significant trends in the temperature-independent contributions to the magnetization. These results are interpreted and discussed in the context of the importance of the variability of the oxidation state of iridium. The differences in physical properties between members of the K(1-x)Ir4O8 (0 ≤ x ≤ 0.7) series are small and appear to be insensitive to the iridium oxidation state.
RESUMEN
We report superconductivity in the full Heusler compound LiPd2Si (space group Fm3Ì m, No. 225) at a critical temperature of Tc = 1.3 K and a normalized heat capacity jump at Tc, ΔC/γTc = 1.1. The low-temperature isothermal magnetization curves imply type-I superconductivity, as previously observed in LiPd2Ge. We show, based on density functional theory calculations and using the molecular orbital theory approach, that while LiPd2Si and LiPd2Ge share the Pd cubic cage motif that is found in most of the reported Heusler superconductors, they show distinctive features in the electronic structure. This is due to the fact that Li occupies the site which, in other compounds, is filled with an early transition metal or a rare-earth metal. Thus, while a simple valence electron count-property relationship is useful in predicting and tuning Heusler materials, inclusion of the symmetry of interacting frontier orbitals is also necessary for the best understanding.