RESUMEN
The existence of a shift-shift memory effect in square waveguides, whereby any translation of the input field induces translations in the output field in four symmetrical directions, has been previously observed by correlation measurements. Here we demonstrate that this memory effect is also observed in real space and can be put to use for imaging purposes. First, a focus is created at the output of a square-core multimode fiber, by wavefront shaping based on feedback from a guide-star. Then, because of the memory effect, four symmetrical spots can be scanned at the fiber output by shifting the wavefront at the fiber input. We demonstrate that this property can be exploited to perform fluorescence imaging through the multimode fiber, without requiring the measurement of a transmission matrix.
RESUMEN
We demonstrate experimentally the existence of a translational optical memory effect in square-core multimode fibers. We found that symmetry properties of square-core waveguides lead to speckle patterns shifting along four directions at the fiber output for any given shift direction at the input. A simple theoretical model based on a perfectly reflective square waveguide is introduced to predict and interpret this phenomenon. We report experimental results obtained with 532-nm coherent light propagating through a square-core step-index multimode fiber, demonstrating that this translational memory effect can be observed for shift distances up to typically 10 µm after propagation through several centimeters of fiber.
RESUMEN
Using an ultrafast optical technique with enhanced frequency control, we image surface-acoustic whispering-gallery-like modes in a microscopic disk at various frequencies up to 1 gigahertz (GHz), allowing experimental determination of their dispersion. This is made possible by intensity-modulated optical pumping and probing with a periodic femtosecond light source. Spatiotemporal Fourier transforms of the two-dimensional acoustic fields measured to micron resolution allow us to isolate individual whispering-gallery modes of first and second radial order as well as their mode patterns and Q factors to unprecedented frequency resolution. We thereby demonstrate arbitrary-frequency ultrafast control and imaging of a micro-acoustic system with an optical time-resolved technique. Applications include quality control of surface acoustic wave filters in telecommunications.
RESUMEN
Zero-Group Velocity (ZGV) Lamb waves are studied in a structure composed of two plates bonded by an adhesive layer. The dispersion curves are calculated for a Duralumin/epoxy/Duralumin sample, where the adhesion is modeled by a normal and a tangential spring at both interfaces. Several ZGV modes are identified and their frequency dependence on interfacial stiffnesses and on the bonding layer thickness is numerically studied. Then, experiments achieved with laser ultrasonic techniques are presented. Local resonances are measured using a superimposed source and probe. Knowing the thicknesses and elastic constants of the Duralumin and epoxy layers, the comparison between theoretical and experimental ZGV resonances leads to an evaluation of the interfacial stiffnesses. A good agreement with theoretical dispersion curves confirms the identification of the resonances and the parameter estimations. This non-contact technique is promising for the local evaluation of bonded structures.
RESUMEN
Elastic waves in anisotropic media can exhibit a power flux that is not collinear with the wave vector. This has notable consequences for waves guided in a plate. Through laser-ultrasonic experiments, we evidence remarkable phenomena due to slow waves in a single-crystal silicon wafer. Waves exhibiting power flux orthogonal to their wave vector are identified. A pulsed line source that excites these waves reveals a wave packet radiated parallel to the line. Furthermore, there exist precisely eight plane waves with zero power flux. These so-called zero-group-velocity modes are oriented along the crystal's principal axes. Time acts as a filter in the wave-vector domain that selects these modes. Thus, a point source leads to beating resonance patterns with moving nodal curves on the surface of the infinite plate. We observe this pattern as it emerges naturally after a pulsed excitation.
RESUMEN
Experiments with an all-optical method for the study of the nonlinear acoustics of cracks in solids are reported. Nonlinear acoustic waves are initiated by the absorption of radiation from a pair of laser beams intensity modulated at two different frequencies. The detection of acoustic waves at mixed frequencies, absent in the frequency spectrum of the heating lasers, by optical interferometry or deflectometry provides unambiguous evidence of the elastic nonlinearity of the crack. The high contrast in crack imaging achieved by remote optical monitoring of the nonlinear acoustic processes is due to the strong dependence of the efficiency of optoacoustic conversion on the state of the crack. The highest acoustic nonlinearity is observed in the transitional state of the crack, which is intermediate between the open and the closed ones.
RESUMEN
We present a minimally-invasive endoscope based on a multimode fiber that combines photoacoustic and fluorescence sensing. From the measurement of a transmission matrix during a prior calibration step, a focused spot is produced and raster-scanned over a sample at the distal tip of the fiber by use of a fast spatial light modulator. An ultra-sensitive fiber-optic ultrasound sensor for photoacoustic detection placed next to the fiber is combined with a photodetector to obtain both fluorescence and photoacoustic images with a distal imaging tip no larger than 250 µm. The high signal-to-noise ratio provided by wavefront shaping based focusing and the ultra-sensitive ultrasound sensor enables imaging with a single laser shot per pixel, demonstrating fast two-dimensional hybrid in vitro imaging of red blood cells and fluorescent beads.
RESUMEN
Zero-group-velocity (ZGV) waves have the peculiarity of being stationary, and thus locally confining energy. Although they are particularly useful in evaluation applications, they have not yet been tracked in two dimensions. Here we image gigahertz zero-group-velocity Lamb waves in the time domain by means of an ultrafast optical technique, revealing their stationary nature and their acoustic energy localization. The acoustic field is imaged to micron resolution on a nanoscale bilayer consisting of a silicon-nitride plate coated with a titanium film. Temporal and spatiotemporal Fourier transforms combined with a technique involving the intensity modulation of the optical pump and probe beams gives access to arbitrary acoustic frequencies, allowing ZGV modes to be isolated. The dispersion curves of the bilayer system are extracted together with the quality factor Q and lifetime of the first ZGV mode. Applications include the testing of bonded nanostructures.
RESUMEN
The local evaluation of several parameters of a crack is realized with a nonlinear laser ultrasonic method. The method is based on the sample excitation by two laser beams, independently intensity modulated at two cyclic frequencies ωH and ωL (ωHâ«ωL) and on the detection of nonlinear frequency-mixing ultrasonic components at frequencies ωH±nωL (n an integer). Frequency-mixing is a nonlinear process originating from the modulation of the crack state at low frequency ωL by laser-induced thermo-elastic stresses, which causes in turn the modulation of the acoustic waves at frequency ωH reflected/transmitted by the crack. We carry experiments with increasing laser power and observe a non-monotonous variation in the amplitude of up to 6 nonlinear sidelobes. We also improve a previously introduced theoretical model which leads to interpreting the experimental observations by the combined action on the crack of the thermo-elastic waves at low frequency ωL and of the stationary thermo-elastic stresses at ω=0. The latter are induced by the average laser power absorbed by the sample. While thermo-elastic wave can periodically modulate the parameters of the crack up to its periodic opening/closing, the stationary heating could cause complete local closure of the crack. By fitting the experimental amplitude evolutions for all monitored sidelobes with the theoretically predicted ones, various local parameters of the crack are extracted, including its local width and effective rigidity.
RESUMEN
Extraordinary transmission of waves, i.e. a transmission superior to the amount predicted by geometrical considerations of the aperture alone, has to date only been studied in the bulk. Here we present a new class of extraordinary transmission for waves confined in two dimensions to a flat surface. By means of acoustic numerical simulations in the gigahertz range, corresponding to acoustic wavelengths λ ~ 3-50 µm, we track the transmission of plane surface acoustic wave fronts between two silicon blocks joined by a deeply subwavelength bridge of variable length with or without an attached cavity. Several resonant modes of the structure, both one- and two-dimensional in nature, lead to extraordinary acoustic transmission, in this case with transmission efficiencies, i.e. intensity enhancements, up to ~23 and ~8 in the two respective cases. We show how the cavity shape and bridge size influence the extraordinary transmission efficiency. Applications include new metamaterials and subwavelength imaging.
RESUMEN
This paper presents a measurement setup for determining the mechanical properties of porous materials at low and medium frequencies by extending toward higher frequencies the quasistatic method based on a compression test. Indeed, classical quasistatic methods generally neglect the inertia effect of the porous sample and the coupling between the surrounding fluid and the frame; they are restricted to low frequency range (<100 Hz) or specific sample shape. In the present method, the porous sample is placed in a cavity to avoid a lateral airflow. Then a specific electrodynamic ironless transducer is used to compress the sample. This highly linear transducer is used as actuator and sensor; the mechanical impedance of the porous sample is deduced from the measurement of the electrical impedance of the transducer. The loss factor and the Young's modulus of the porous material are estimated by inverse method based on the Biot's model. Experimental results obtained with a polymer foam show the validity of the method in comparison with quasistatic method. The frequency limit has been extended from 100 Hz to 500 Hz. The sensitivity of each input parameter is estimated in order to point out the limitations of the method.