RESUMEN
To show that quantification of abnormal respiratory sounds by our developed device is useful for predicting respiratory failure and airway problems after extubation. A respiratory sound monitoring system was used to collect respiratory sounds in patients undergoing extubation. The recorded respiratory sounds were subsequently analyzed. We defined the composite poor outcome as requiring any of following medical interventions within 48 h as defined below. This composite outcome includes reintubation, surgical airway management, insertion of airway devices, unscheduled use of noninvasive ventilation or high-flow nasal cannula, unscheduled use of inhaled medications, suctioning of sputum by bronchoscopy and unscheduled imaging studies. The quantitative values (QV) for each abnormal respiratory sound and inspiratory sound volume were compared between composite outcome groups and non-outcome groups. Fifty-seven patients were included in this study. The composite outcome occurred in 18 patients. For neck sounds, the QVs of stridor and rhonchi were significantly higher in the outcome group vs the non-outcome group. For anterior thoracic sounds, the QVs of wheezes, rhonchi, and coarse crackles were significantly higher in the outcome group vs the non-outcome group. For bilateral lateral thoracic sounds, the QV of fine crackles was significantly higher in the outcome group vs the non-outcome group. Cervical inspiratory sounds volume (average of five breaths) immediately after extubation was significantly louder in the outcome group vs non-outcome group (63.3 dB vs 54.3 dB, respectively; p < 0.001). Quantification of abnormal respiratory sounds and respiratory volume may predict respiratory failure and airway problems after extubation.
Asunto(s)
Insuficiencia Respiratoria , Ruidos Respiratorios , Humanos , Proyectos Piloto , Extubación Traqueal/efectos adversos , Respiración Artificial/efectos adversos , Insuficiencia Respiratoria/etiologíaRESUMEN
The adherens junction (AJ) is an actin filament-anchoring junction. It plays a central role in epithelial morphogenesis through cadherin-based recognition and adhesion among cells. The stability and plasticity of AJs are required for the morphogenesis. An actin-binding α-catenin is an essential component of the cadherin-catenin complex and functions as a tension transducer that changes its conformation and induces AJ development in response to tension. Despite much progress in understanding molecular mechanisms of tension sensitivity of α-catenin, its significance on epithelial morphogenesis is still unknown. Here we show that the tension sensitivity of α-catenin is essential for epithelial cells to form round spheroids through proper multicellular rearrangement. Using a novel in vitro suspension culture model, we found that epithelial cells form round spheroids even from rectangular-shaped cell masses with high aspect ratios without using high tension and that increased tension sensitivity of α-catenin affected this morphogenesis. Analyses of AJ formation and cellular tracking during rounding morphogenesis showed cellular rearrangement, probably through AJ remodeling. The rearrangement occurs at the cell mass level, but not single-cell level. Hypersensitive α-catenin mutant-expressing cells did not show cellular rearrangement at the cell mass level, suggesting that the appropriate tension sensitivity of α-catenin is crucial for the coordinated round morphogenesis.Key words: α-catenin, vinculin, adherens junction, morphogenesis, mechanotransduction.
Asunto(s)
Uniones Adherentes , Mecanotransducción Celular , Uniones Adherentes/metabolismo , Cadherinas , Morfogénesis , alfa Catenina/química , alfa Catenina/metabolismoRESUMEN
Cell nuclei behave as viscoelastic materials. Dynamic regulation of the viscoelastic properties of nuclei in living cells is crucial for diverse biological and biophysical processes, specifically for intranuclear mesoscale viscoelasticity, through modulation of the efficiency of force propagation to the nucleoplasm and gene expression patterns. However, how the intranuclear mesoscale viscoelasticity of stem cells changes with differentiation is unclear and so is its biological significance. Here, we quantified the changes in intranuclear mesoscale viscoelasticity during osteoblastic differentiation of human mesenchymal stem cells. This analysis revealed that the intranuclear region is a viscoelastic solid, probably with a higher efficiency of force transmission that results in high sensitivity to mechanical signals in the early stages of osteoblastic differentiation. The intranuclear region was noted to alter to a viscoelastic liquid with a lower efficiency, which is responsible for the robustness of gene expression toward terminal differentiation. Additionally, evaluation of changes in the mesoscale viscoelasticity due to chromatin decondensation and correlation between the mesoscale viscoelasticity and local DNA density suggested that size of gap and flexibility of chromatin meshwork structures, which are modulated depending on chromatin condensation state, determine mesoscale viscoelasticity, with various rates of contribution in different differentiation stages. Given that chromatin within the nucleus condenses into heterochromatin as stem cells adopt a specific lineage by restricting transcription, viscoelasticity is perhaps a key factor in cooperative regulation of the nuclear mechanosensitivity and gene expression pattern for stem cell differentiation.
Asunto(s)
Diferenciación Celular , Núcleo Celular/química , Cromatina/química , Elasticidad , Mecanotransducción Celular , Células Madre Mesenquimatosas/citología , Osteoblastos/citología , Citoesqueleto de Actina/química , Citoesqueleto de Actina/metabolismo , ADN/química , Humanos , Células Madre Mesenquimatosas/metabolismo , Osteoblastos/metabolismo , ViscosidadRESUMEN
Assessment of respiratory sounds by auscultation with a conventional stethoscope is subjective. We developed a continuous monitoring and visualization system that enables objectively and quantitatively visualizing respiratory sounds. We herein present two cases in which the system showed regional differences in the respiratory sounds. We applied our novel continuous monitoring and visualization system to evaluate respiratory abnormalities in patients with acute chest disorders. Respiratory sounds were continuously recorded to assess regional changes in respiratory sound volumes. Because we used this system as a pilot study, the results were not shown in real time and were retrospectively analyzed. Case 1 An 89-year-old woman was admitted to our hospital for sudden-onset respiratory distress and hypoxia. Chest X-rays revealed left pneumothorax; thus, we drained the thorax. After confirming that the pneumothorax had improved, we attached the continuous monitoring and visualization system. Chest X-rays taken the next day showed exacerbation of the pneumothorax. Visual and quantitative findings showed a decreased respiratory volume in the left lung after 3 h. Case 2 A 94-year-old woman was admitted to our hospital for dyspnea. Chest X-rays showed a large amount of pleural effusion on the right side. The continuous monitoring and visualization system visually and quantitatively revealed a decreased respiratory volume in the lower right lung field compared with that in the lower left lung field. Our newly developed continuous monitoring and visualization system enabled quantitatively and visually detecting regional differences in respiratory sounds in patients with pneumothorax and pleural effusion.
Asunto(s)
Derrame Pleural , Neumotórax , Femenino , Humanos , Anciano de 80 o más Años , Ruidos Respiratorios , Neumotórax/diagnóstico por imagen , Neumotórax/etiología , Estudios Retrospectivos , Proyectos PilotoRESUMEN
In many physical or biological systems, diffusion can be described by Brownian motions with stochastic diffusion coefficients (DCs). In the present study, we investigate properties of the diffusion with a broad class of stochastic DCs with an approach that is different from subordination. We show that for a finite time, the propagator is non-Gaussian and heavy tailed. This means that when the mean square displacements are the same, for a finite time, some of the diffusing particles with stochastic DCs diffuse farther than the particles with deterministic DCs or exhibiting a fractional Brownian motion. We also show that when a stochastic DC is ergodic, the propagator converges to a Gaussian distribution in the long time limit. The speed of convergence is determined by the autocovariance function of the DC.
RESUMEN
Leukocytes can rapidly migrate virtually within any substrate found in the body at speeds up to 100 times faster than mesenchymal cells that remain firmly attached to a substrate even when migrating. To understand the flexible migration strategy utilized by leukocytes, we experimentally investigated the three-dimensional modulation of cortical plasticity during the formation of pseudopodial protrusions by mouse leukocytes isolated from blood. The surfaces of viable leukocytes were discretely labeled with fluorescent beads that were covalently conjugated with concanavalin A receptors. The movements of these fluorescent beads were different at the rear, central, and front surfaces. The beads initially present on the rear and central dorsal surfaces of the cell body flowed linearly toward the rear peripheral surface concomitant with a significant collapse of the cell body in the dorsal-ventral direction. In contrast, those beads initially on the front surface moved into a newly formed pseudopodium and exhibited rapid, random movements within this pseudopodium. Bead movements at the front surface were hypothesized to have resulted from rupture of the actin cytoskeleton and detachment of the plasma membrane from the actin cytoskeletal cortex, which allowed leukocytes to migrate while being minimally constrained by a substrate.
Asunto(s)
Movimiento Celular , Leucocitos/citología , Seudópodos/metabolismo , Animales , Colorantes Fluorescentes/análisis , Leucocitos/metabolismo , Ratones , Microscopía Fluorescente/métodosRESUMEN
Mesenchymal stem cells (MSCs) have the potential for self-renewal and multipotency to differentiate into various lineages. Thus, they are of great interest in regenerative medicine as a cell source for tissue engineering. Substrate stiffness is one of the most extensively studied exogenous physical factors; however, consistent results have not always been reported for controlling MSCs. Conventionally used stiff culture substrates, such as tissue-culture polystyrene and glass, enhance nuclear localization of a mechanotransducer YAP and a pre-osteogenic transcription factor RUNX2, and bias MSCs towards the osteogenic lineage, even without osteogenic-inducing soluble factors. The mechanosensitive nature and intrinsic heterogeneity present challenges for obtaining reproducible results. This review summarizes the heterogeneity in human MSC response, specifically, nuclear/cytoplasmic localization changes in the mechanotransducer yes-associated protein (YAP) and the osteogenic transcription factor RUNX2, in response to substrate stiffness. In addition, a perspective on the intracellular factors attributed to response heterogeneity is discussed. The optimal range of stiffness parameters, Young's modulus, for MSC expansion culture to suppress osteogenic differentiation bias through the suppression of YAP and RUNX2 nuclear localization, and cell cycle progression is likely to be surprisingly narrow for a cell population from an identical donor and vary among cell populations from different donors. We believe that characterization of the heterogeneity of MSCs and understanding their biological meaning is an exciting research direction to establish guidelines for the design of culture substrates for the sophisticated control of MSC properties.
RESUMEN
To establish a guideline for the design of cell culture substrates to control human mesenchymal stem cell (MSC) differentiation, we quantitatively characterized the heterogeneity in the responsiveness of MSCs to the elastic modulus of culture substrates. We analyzed the elastic modulus-dependent dynamics of a mechanotransducer, YAP, and an osteogenic differentiation factor, RUNX2, in three different MSC lots using a styrenated gelatin gel with controllable elastic modulus. The percentage of cells with YAP in the nucleus increased linearly with increases in the elastic modulus, reaching a plateau at 10 kPa for all the lots analyzed. The increase in the percentage with the substrate elastic modulus was described by the same linear function. The percentage of cells with RUNX2 nuclear localization also increased linearly with increases in the substrate elastic modulus, plateauing at 5 kPa, although the regression lines to the linearly increasing regions varied between lots. These similarities and differences in YAP and RUNX2 dynamics among cell populations are basis to design the substrate elastic modulus to manipulate YAP and RUNX2 localizations.
Asunto(s)
Materiales Biocompatibles/farmacología , Técnicas de Cultivo de Célula , Proteínas de Ciclo Celular/metabolismo , Subunidad alfa 1 del Factor de Unión al Sitio Principal/metabolismo , Células Madre Mesenquimatosas/efectos de los fármacos , Factores de Transcripción/metabolismo , Materiales Biocompatibles/síntesis química , Materiales Biocompatibles/química , Diferenciación Celular/efectos de los fármacos , Diseño de Fármacos , Humanos , Células Madre Mesenquimatosas/metabolismoRESUMEN
The elasticity, topography, and chemical composition of cell culture substrates influence cell behavior. However, the cellular responses toin vivoextracellular matrix (ECM), a hydrogel of proteins (mainly collagen) and polysaccharides, remain unknown as there is no substrate that preserves the key features of native ECM. This study introduces novel collagen hydrogels that can combine elasticity, topography, and composition and reproduce the correlation between collagen concentration (C) and elastic modulus (E) in native ECM. A simple reagent-free method based on radiation-cross-linking altered ECM-derived collagen I and hydrolyzed collagen (gelatin or collagen peptide) solutions into hydrogels with tunable elastic moduli covering a broad range of soft tissues (E= 1-236 kPa) originating from the final collagen density in the hydrogels (C= 0.3%-14%) and precise microtopographies (⩾1 µm). The amino acid composition ratio was almost unchanged by this method, and the obtained collagen hydrogels maintained enzyme-mediated degradability. These collagen hydrogels enabled investigation of the responses of cell lines (fibroblasts, epithelial cells, and myoblasts) and primary cells (rat cardiomyocytes) to soft topographic cues such as thosein vivounder the positive correlation betweenCandE. These cells adhered directly to the collagen hydrogels and chose to stay atop or spontaneously migrate into them depending onE, that is, the density of the collagen network,C. We revealed that the cell morphology and actin cytoskeleton organization conformed to the topographic cues, even when they are as soft asin vivoECM. The stiffer microgrooves on collagen hydrogels aligned cells more effectively, except HeLa cells that underwent drastic changes in cell morphology. These collagen hydrogels may not only reducein vivoandin vitrocell behavioral disparity but also facilitate artificial ECM design to control cell function and fate for applications in tissue engineering and regenerative medicine.
Asunto(s)
Materiales Biocompatibles , Fenómenos Fisiológicos Celulares/efectos de los fármacos , Colágeno , Elasticidad/efectos de los fármacos , Hidrogeles , Animales , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacología , Células Cultivadas , Colágeno/química , Colágeno/farmacología , Perros , Matriz Extracelular/química , Matriz Extracelular/efectos de los fármacos , Matriz Extracelular/metabolismo , Células HeLa , Humanos , Hidrogeles/química , Hidrogeles/farmacología , Células de Riñón Canino Madin Darby , Ratas , Propiedades de SuperficieRESUMEN
Migrating cells in vivo monitor the physiological state of an organism by integrating the physical as well as chemical cues in the extracellular microenvironment, and alter the migration mode, in order to achieve their unique function. The clarification of the mechanism focusing on the topographical cues is important for basic biological research, and for biomedical engineering specifically to establish the design concept of tissue engineering scaffolds. The aim of this study is to understand how cells sense and respond to the complex topographical cues in vivo by exploring in vitro analyses to complex in vivo situations in order to simplify the issue. Since the intracellular mechanical events at subcellular scales and the way of the coordination of these events are supposed to change in the migrating cells, a key to success of the analysis is a mechanical point of view with a particular focus of the subcellular mechanical events. We designed an experimental platform to explore the mechanical requirements in a migrating fibroma cell responding to micro-grooves. The micro-grooved structure is a model of gap structures, typically seen in the microenvironments in vivo. In our experiment, the contributions of actomyosin force generation can be spatially divided and analyzed in the cell center and peripheral regions. The analysis specified that rapid leading edge protrusion, and the cell body translocation coordinated with the leading edge protrusion are required for the turning response at a micro-groove.
Asunto(s)
Actomiosina/química , Movimiento Celular , Ingeniería de Tejidos/métodos , Amidas/química , Animales , Azepinas/química , Adhesión Celular , Recuento de Células , Línea Celular , Dimetilpolisiloxanos/química , Fibroma/metabolismo , Gerbillinae , Fenómenos Mecánicos , Naftalenos/química , Péptidos/metabolismo , Piridinas/químicaRESUMEN
To understand the mechanism regulating the spontaneous change in polarity that leads to cell turning, we quantitatively analyzed the dynamics of focal adhesions (FAs) coupling with the self-assembling actin cytoskeletal structure in Swiss 3T3 fibroblasts. Fluorescent images were acquired from cells expressing GFP-actin and RFP-zyxin by laser confocal microscopy. On the basis of the maximum area, duration, and relocation distance of FAs extracted from the RFP-zyxin images, the cells could be divided into 3 regions: the front region, intermediate lateral region, and rear region. In the intermediate lateral region, FAs appeared close to the leading edge and were stabilized gradually as its area increased. Simultaneously, bundled actin stress fibers (SFs) were observed vertically from the positions of these FAs, and they connected to the other SFs parallel to the leading edge. Finally, these connecting SFs fused to form a single SF with matured FAs at both ends. This change in SF organization with cell retraction in the first cycle of migration followed by a newly formed protrusion in the next cycle is assumed to lead to cell turning in migrating Swiss 3T3 fibroblasts.
Asunto(s)
Actinas/metabolismo , Movimiento Celular/fisiología , Fibroblastos/metabolismo , Fibroblastos/fisiología , Adhesiones Focales/metabolismo , Adhesiones Focales/fisiología , Fibras de Estrés/metabolismo , Animales , Células Cultivadas , Citoesqueleto/metabolismo , Proteínas Fluorescentes Verdes/metabolismo , Ratones , Microscopía Fluorescente/métodos , Células 3T3 NIHRESUMEN
The physiological role of the actin cytoskeleton is well known: it provides mechanical support and endogenous force generation for formation of a cell shape and for migration. Furthermore, a growing number of studies have demonstrated another significant role of the actin cytoskeleton: it offers dynamic epigenetic memory for guiding cell fate, in particular, proliferation and differentiation. Because instantaneous imbalance in the mechanical homeostasis is adjusted through actin remodeling, a synthetic extracellular matrix (ECM) niche as a source of topographical and mechanical cues is expected to be effective at modulation of the actin cytoskeleton. In this context, the synthetic ECM niche determines cell migration, proliferation, and differentiation, all of which have to be controlled in functional tissue engineering scaffolds to ensure proper regulation of tissue/organ formation, maintenance of tissue integrity and repair, and regeneration. Here, with an emphasis on the epigenetic role of the actin cytoskeletal system, we propose a design concept of micro/nanotopography of a tissue engineering scaffold for control of cell migration, proliferation, and differentiation in a stable and well-defined manner, both in vitro and in vivo.
Asunto(s)
Citoesqueleto de Actina/metabolismo , Linaje de la Célula , Matriz Extracelular/química , Ingeniería de Tejidos/métodos , Andamios del Tejido/química , Animales , Fenómenos Biofísicos , HumanosRESUMEN
Meiotic maturation is essential for the reproduction procedure of many animals. During this process an oocyte produces a large egg cell and tiny polar bodies by highly asymmetric division. In this study, to fully understand the sophisticated spatiotemporal regulation of accurate oocyte meiotic division, we focused on the global and local changes in the tension at the surface of the starfish (Asterina pectinifera) oocyte in relation to the surface actin remodeling. Before the onset of the bulge formation, the tension at the animal pole globally decreased, and started to increase after the onset of the bulge formation. Locally, at the onset of the bulge formation, tension at the top of the animal pole began to decrease, whereas that at the base of the bulge remarkably increased. As the bulge grew, the tension at the base of the bulge additionally increased. Such a change in the tension at the surface was similar to the changing pattern of actin distribution. Therefore, meiotic cell division was initiated by the bulging of the cortex, which had been weakened by actin reduction, and was followed by contraction at the base of the bulge, which had been reinforced by actin accumulation. The force generation system is assumed to allow the meiotic apparatus to move just under the membrane in the small polar body. Furthermore, a detailed comparison of the tension at the surface and the cortical actin distribution indicated another sophisticated feature, namely that the contraction at the base of the bulge was more vigorous than was presumed based on the actin distribution. These features of the force generation system will ensure the precise chromosome segregation necessary to produce a normal ovum with high accuracy in the meiotic maturation.
Asunto(s)
División Celular/fisiología , Animales , Modelos Teóricos , Oocitos/citología , Análisis Espacio-Temporal , Estrellas de Mar/citologíaRESUMEN
We present a methodology for integrative multiscale analysis to highlight hierarchical properties of cellular protrusion and mechanochemical interactions in cellular protrusion based on live cell imaging data with high spatiotemporal resolution. As an appropriate experimental system, we selected non-polarized full-moon-shaped keratocytes that present balanced protrusion around the entire cell periphery at the cellular scale simultaneously with active protrusion and retraction at the subcellular scale. We achieved the observation of a whole cell with sub-micrometer spatial precision and sub-second time resolution for three minutes or more. The multiscale characteristics of cell peripheral activity and those of the cell peripheral shape were extracted from an identical image sequence by estimating the cell protrusion rates and the cell peripheral curvatures at various differential intervals. The spatiotemporal maps of the cell protrusion rates demonstrated a spatiotemporally nested structure of travelling waves of active protruding regions at the cellular and subcellular scales. Moreover, correlation analysis demonstrated the relationship between the cell protrusion rate and peripheral curvature at the subcellular scale. The novel integrative methodology presented here well highlighted the hierarchical properties of organized cellular protrusion, and further provided insight about the underlying mechanochemical interactions between the cell membrane and the actin filaments under the membrane.
Asunto(s)
Queratinocitos/citología , Citoesqueleto de Actina , Actinas/química , Animales , Movimiento Celular , Forma de la Célula , Characidae , Citoesqueleto/metabolismo , Epidermis/metabolismo , Procesamiento de Imagen Asistido por Computador , Cinética , Microscopía/métodos , Microscopía Fluorescente/métodos , Estrés Mecánico , Factores de TiempoRESUMEN
Topographical features are known to physically affect cell behavior and are expected to have great potential for non-invasive control of such behavior. To provide a design concept of a microstructured surface for elaborate non-invasive control of cell migration, we systematically analyzed the effect of microgrooves on cell migration. We fabricated silicon microstructured surfaces covered with SiO(2) with microgrooves of various sizes, and characterized the behavior of cells moving from the flat surface to the grooved surface. The intersecting microgrooves with well-defined groove width absorbed or repelled cells precisely according to the angle of approach of the cell to the boundary with the grooved surface. This filtering process was explained by the difference in the magnitude of the lamellar dragging effect resulting from the number of the grooves interacting with the lamella of the cell. This study provides a framework to tailor the microgrooved surface for non-invasive control of cell migration with label-free detection of a specific property of the target cells. This should offer significant benefits to biomedical research and applications.
Asunto(s)
Adhesión Celular , Técnicas de Cultivo de Célula/métodos , Movimiento Celular , Fibroblastos/citología , Animales , Materiales Biocompatibles/metabolismo , Células Cultivadas , Filtración , Peces , Microscopía Electrónica de Rastreo , Dióxido de Silicio , Propiedades de SuperficieRESUMEN
Cell migration control techniques have been proposed for cells with relatively low migratory activity, based on static analyses performed with cells that attain a temporally homogenous state after being exposed to a cell guiding stimulus. To elucidate new functions of substrate topography, we investigated the transient change in the behavior of highly migratory cells coming from a flat surface to a grooved surface on a silicon substrate covered with SiO(2). A single line groove (1.5 µm in width, 20 µm in depth) and intersecting grooves (1.5 µm in width, 5 µm in spacing, 20 µm in depth) functioned as an effective cell repellent. In the case of wider grooves, a single line groove (4 µm in width; 20 µm in width) had no specified function. In contrast, intersecting grooves (4 µm in width, 5 µm in spacing) functioned as a trap for the cells. Our findings yield a new design concept of cell repelling and trapping surfaces which are applicable to cell guiding methods and single or multiple cell confinement on cell culture substrates, and thus may contribute to development of more advanced biomaterials.
Asunto(s)
Técnicas de Cultivo de Célula/métodos , Movimiento Celular , Células Epidérmicas , Animales , Peces , Propiedades de SuperficieRESUMEN
We used a monochromatic charge-coupled-device camera to observe the migration behavior of Amoeba proteus every 5 s over a time course of 10000 s in order to investigate the characteristics of its centroid movement (cell velocity) over the long term. Fourier transformation of the time series of the cell velocity revealed that its power spectrum exhibits a Lorentz type profile with a relaxation time of a few hundred seconds. Moreover, some sharp peaks were found in the power spectrum, where the ratios of any two frequencies corresponding to the peaks were expressed as simple rational numbers. Analysis of the trajectory using a Langevin equation showed that the power spectrum reflects characteristics of the cell's motive force. These results suggest that some phenomena relating to the cell's motility, such as protoplasmic streaming and the sol-gel transformation of actin filaments, which seem to be independent phenomena and have different relaxation times, interact with each other and cooperatively participate in the generation process of the motive force.
Asunto(s)
Amoeba/fisiología , Movimiento/fisiología , Animales , Microscopía por Video , Modelos Teóricos , Análisis EspectralRESUMEN
We determined the tension over the entire surface of the sea urchin eggs during cytokinesis, on the basis of the intracellular pressure and cell shape. This allowed us to determine the temporal changes in both the distribution of local forces and the total force produced in the whole cell cortex. A spike-like peak at anaphase and a broader peak at the onset of furrowing were observed in the time-course of the total force. Treatment of the eggs with cytochalasin D, blebbistatin, ML-9, or ML-7 significantly lowered the total force when they inhibited cytokinesis, suggesting that the tension results mainly from the interaction between intact actin filaments and activated myosin II. Myosin II would function as a motor, not only in the furrow region, but over a wide area of the cell surface, because the sum of the tensions outside the furrow region was larger than that inside the furrow region throughout cytokinesis. The distribution of the local force revealed that a global increase in the cortical force started well before the onset of furrowing, and that the force inside the furrow region continued to increase despite the decrease in the force outside the furrow region after the onset of furrowing. The spatial and temporal patterns of the force over the entire surface support the hypothesis that there are two separate but coordinated actomyosin activation mechanisms, one of which induces global activation of the cortex and the other of which then maintains the contractility only inside the furrow region.