RESUMEN
The self-organized transport and delivery of reactive liquids without spillage or loss of activity have been among the most daunting challenges for a long time. In this direction, we employ the concept of forming "liquid marbles" (LMs) to encapsulate and transport reactive hydrogen peroxide (H2O2) coated with functional microparticles. For example, peroxide marbles coated with a toner ink display remote-controlled magnetotactic movement inside a fluidic medium, thus overcoming the weaknesses associated with use of the bare droplets. Interestingly, in such a scenario, the coating of the marbles could also be removed or reformed by bringing the magnet towards or away from the marble. In this way, this process could ensure an on-demand remotely guided coating on the peroxide droplet or its removal. The liquid marbles carrying peroxide solutions are found to preserve the activity of the peroxide and exhibit a low evaporation rate compared with the uncoated peroxide fuel. Interestingly, oil droplets floating on the water could be recovered by introducing the armoured LMs into water under magnetic guidance. Further, the functionalized marbles could be employed as suicide bags for the on-demand delivery of reactive materials in targeted locations. Preliminary research on the antibacterial activity of such liquid marbles has proven to be effective in bacterial killing, which may create new avenues for emerging antibacterial and antibiofilm applications. Finally, such functionalized LMs have been employed to investigate the effects of surface charge on attachment of recombinant Escherichia coli bacteria expressing green fluorescent protein and monitoring the real-time imaging of bacterial death attached to the marble surface.
RESUMEN
The dynamics of the condensation process on nanostructured surfaces can be modulated substantially by tuning the surface architecture. Present study uses the mesoscopic framework of lattice Boltzmann method (LBM) to explore the role of surface morphology and cold spot temperature in determining the visual state of the condensate droplet, mode of nucleation, and associated rates of energy and mass interactions. A multiple relaxation time-(MRT)-based LBM solver, coupled with pseudopotential model, has been developed to simulate a rectangular domain of saturated vapor, housing a cold spot on the bottom rough surface. Superhydrophobicity has been achieved for certain combinations of surface parameters, with the intercolumn spacing being the most influential one. Gradual increase in the spacing modifies the nucleation mode from top through side to bottom, while the droplet changes from Cassie to Wenzel state. The Cassie drop in top nucleation mode exhibits the largest contact angle and least rate of surface heat transfer. Both types of Wenzel drops display large rate of condensation and two peaks in heat transfer, along with very short nucleation time in comparison with Cassie drops. Couple of phase diagrams have been developed combining all four scenarios of condensation predicted by the present model. One important novelty of the present study is the consideration of nonisothermal condition within LB structure. Enhancement in the degree of subcooling at the cold spot encourages greater condensation and Cassie-to-Wenzel transition.
RESUMEN
The pseudopotential-based lattice Boltzmann method (LBM), despite enormous potential in facilitating natural development and migration of interfaces during multiphase simulation, remains restricted to low-density ratios, owing to inherent thermodynamic inconsistency. The present paper focuses on augmenting the basic algorithm by enhancing the isotropy of the discrete equation and thermodynamic consistency of the overall formulation, to expedite simulation of pool boiling at higher-density ratios. Accordingly, modification is suggested in the discrete form of the updated interparticle interaction term, by expanding the discretization to the eighth order. The proposed amendment is successful in substantially reducing the spurious velocity in the vicinity of a static droplet, while allowing stable simulation at a much higher-density ratio under identical conditions, which is a noteworthy improvement over existing Single Relaxation Time (SRT)-LBM algorithms. Various pool boiling scenarios have been explored for a reduced temperature of 0.75, which itself is significantly lower than reported in comparable literature, in both rectangular and cylindrical domains, and also with micro- and distributed heaters. All three regimes of pool boiling have aptly been captured with both plain and structured heaters, allowing the development of the boiling curve. The predicted value of critical heat flux for the plain heater agrees with Zuber correlation within 10%, illustrating both quantitative and qualitative capability of the proposed algorithm.
RESUMEN
Spatiotemporal thermal response and characteristics of net entropy production rate of a gold nanosphere (radius: 50-200 nm), subjected to a short-pulse, femtosecond laser is reported. In order to correctly illustrate the temperature history of laser-metal interaction(s) at picoseconds transient with a comprehensive single temperature definition in macroscale and to further understand how the thermophysical response of the single-phase lag (SPL) and dual-phase lag (DPL) frameworks (with various lag-ratios') differs, governing energy equations derived from these benchmark non-Fourier frameworks are numerically solved and thermodynamic assessment under both the classical irreversible thermodynamics (CIT) as well as extended irreversible thermodynamics (EIT) frameworks is subsequently carried out. Under the frameworks of SPL and DPL with small lag ratio, thermophysical anomalies such as temperature overshooting characterized by adverse temperature gradient is observed to violate the local thermodynamic equilibrium (LTE) hypothesis. The EIT framework, however, justifies the compatibility of overshooting of temperature with the second law of thermodynamics under a nonequilibrium paradigm. The DPL framework with higher lag ratio was however observed to remain free from temperature overshooting and finds suitable consistency with LTE hypothesis. In order to solve the dimensional non-Fourier governing energy equation with volumetric laser-irradiation source term(s), the lattice Boltzmann method (LBM) is extended and a three-time level, fully implicit, second order accurate finite difference method (FDM) is illustrated. For all situations under observation, the LBM scheme is featured to be computationally superior to remaining FDM schemes. With detailed prediction of maximum temperature rise and the corresponding peaking time by all the numerical schemes, effects of the change of radius of the gold nanosphere, the magnitude of fluence of laser, and laser irradiation with multiple pulses on thermal energy transport and lagging behavior (if any) are further elucidated at different radial locations of the gold nanosphere. Last, efforts are further made to address the thermophysical characteristics when effective thermal conductivity (with temporal and size effects) is considered instead of the usual bulk thermal conductivity.