RESUMEN
PURPOSE: This manuscript is devoted to discuss the interplay between velocity and acceleration in setting metabolic and mechanical power in team sports. METHODS: To this aim, an essential step is to assess the individual Acceleration-Speed Profile (ASP) by appropriately analysing training sessions or matches. This allows one to estimate maximal mechanical and metabolic power, including that for running at constant speed, and hence to determine individual thresholds thereof. RESULTS: Several approaches are described and the results, as obtained from 38 official matches of one team (Italian Serie B, season 2020-2021), are reported and discussed. The number of events in which the external mechanical power exceeded 80% of that estimated from the subject's ASP ([Formula: see text]) was 1.61 times larger than the number of accelerations above 2.5 m s-2 ([Formula: see text]). The difference was largest for midfielders and smallest for attackers (2.30 and 1.36 times, respectively) due to (i) a higher starting velocity for midfielders and (ii) a higher external peak power for attackers in performing [Formula: see text]. From the energetic perspective, the duration and the corresponding metabolic power of high-demanding phases ([Formula: see text]) were essentially constant (6 s and 22 W kg-1, respectively) from the beginning to the end of the match, even if their number decreased from 28 in the first to 21 in the last 15-min period, as a consequence of the increased recovery time between [Formula: see text] from 26 s in the first to 37 s in the last 15-min period. CONCLUSION: These data underline the flaws of acceleration counting above fixed thresholds.
Asunto(s)
Rendimiento Atlético , Fútbol Americano , Carrera , Humanos , Deportes de Equipo , Metabolismo Energético , AceleraciónRESUMEN
The primary objective of this study was to investigate the relationship between metatarsophalangeal joint (MTPj) flexion torque and sprint acceleration, cutting and jumping performance, and kinetics. A secondary aim was to explore this relationship when MTP flexion strength was associated with other foot and lower limb neuromuscular outputs. After an initial MTPj flexion torque assessment using a custom-built dynamometer, 52 high-level athletes performed the following tasks on a force platform system: maximal sprint acceleration, 90-degree cutting, vertical and horizontal jumps, and foot-ankle hops. Their foot posture, foot passive stiffness and foot-ankle reactive strength were assessed using the Foot Posture Index, the Arch Height Index Measurement System and the Foot-Ankle Rebound Jump Test. Ankle plantarflexion and knee extension isometric torque were assessed using an isokinetic dynamometer. During maximal speed sprinting, multiple linear regressions suggested a major contribution of MTPj flexion torque, foot passive stiffness and foot-ankle reactive strength to explain 28% and 35% of the total variance in the effective vertical impulse and contact time. Ankle plantarflexor and quadriceps isometric torques were aggregately contributors of acceleration performance and separate contributors of cutting and jumping performance. In conclusion, MTPj flexion torque was more strongly associated with sprinting performance kinetics especially at high-speed.
Asunto(s)
Aceleración , Rendimiento Atlético , Pie , Fuerza Muscular , Carrera , Torque , Humanos , Fuerza Muscular/fisiología , Carrera/fisiología , Rendimiento Atlético/fisiología , Pie/fisiología , Adulto Joven , Masculino , Fenómenos Biomecánicos , Articulación Metatarsofalángica/fisiología , Cinética , Femenino , Tobillo/fisiología , Músculo Esquelético/fisiología , Adolescente , Adulto , Postura/fisiologíaRESUMEN
PURPOSE: Acceleration phases require additional mechanical and metabolic power, over and above that for running at constant velocity. The present study is devoted to a paradigmatic example: the 100-m dash, in which case the forward acceleration is very high initially and decreases progressively to become negligible during the central and final phases. METHODS: The mechanical ([Formula: see text]) and metabolic ([Formula: see text]) power were analysed for both Bolt's extant world record and for medium level sprinters. RESULTS: In the case of Bolt, [Formula: see text] and [Formula: see text] attain peaks of ≈ 35 and ≈ 140 W kg-1 after ≈ 1 s, when the velocity is ≈ 5.5 m s-1; they decrease substantially thereafter, to attain constant values equal to those required for running at constant speed (≈ 18 and ≈ 65 W kg-1) after ≈ 6 s, when the velocity has reached its maximum (≈ 12 m s-1) and the acceleration is nil. At variance with [Formula: see text], the power required to move the limbs in respect to the centre of mass (internal power, [Formula: see text]) increases gradually to reach, after ≈ 6 s a constant value of ≈ 33 W kg-1. As a consequence, [Formula: see text] ([Formula: see text]) increases throughout the run to a constant value of ≈ 50 W kg-1. In the case of the medium level sprinters, the general patterns of speed, mechanical and metabolic power, neglecting the corresponding absolute values, follow an essentially equal trend. CONCLUSION: Hence, whereas in the last part of the run the velocity is about twice that observed after ≈ 1 s, [Formula: see text] and [Formula: see text] are reduced to 45-50% of the peak values.
Asunto(s)
Carrera , Humanos , Metabolismo Energético , AceleraciónRESUMEN
Establishing a sprint acceleration force-velocity profile is a way to assess an athlete's sprint-specific strength and speed production capacities. It can be determined in field condition using GNSS-based (global navigation satellite system) devices. The aims of this study were to (1) assess the inter-unit and the inter-trial reliability of the force-velocity profile variables obtained with K-AI Wearable Tech devices (50 Hz), (2) assess the concurrent validity of the input variables (maximal sprint speed and acceleration time constant), and (3) assess the validity of the output variables (maximal force output, running velocity and power). Twelve subjects, including one girl, performed forty-one 30 m sprints in total, during which the running speed was measured using two GPS (global positioning system) devices placed on the upper back and a radar (Stalker® Pro II Sports Radar Gun). Concurrent validity, inter-device and inter-trial reliability analyses were carried out for the input and output variables. Very strong to poor correlation (0.99 to 0.38) was observed for the different variables between the GPS and radar devices, with typical errors ranging from small to large (all < 7.6%). Inter-unit reliability was excellent to moderate depending on the variable (ICC values between 0.65 and 0.99). Finally, for the inter-trial reliability, the coefficients of variation were low to very low (all < 5.6%) for the radar and the GPS. The K-AI Wearable Tech used in this study is a concurrently valid and reliable alternative to radar for assessing a sprint acceleration force-velocity profile.
Asunto(s)
Rendimiento Atlético , Deportes , Humanos , Reproducibilidad de los Resultados , Fenómenos Mecánicos , Aceleración , Sistemas de Información GeográficaRESUMEN
The aim was to determine the respective influences of sprinting maximal power output ( P H max ) and mechanical Force-velocity (F-v) profile (ie, ratio between horizontal force production capacities at low and high velocities) on sprint acceleration performance. A macroscopic biomechanical model using an inverse dynamics approach applied to the athlete's center of mass during running acceleration was developed to express the time to cover a given distance as a mathematical function of P H max and F-v profile. Simulations showed that sprint acceleration performance depends mainly on P H max , but also on the F-v profile, with the existence of an individual optimal F-v profile corresponding, for a given P H max , to the best balance between force production capacities at low and high velocities. This individual optimal profile depends on P H max and sprint distance: the lower the sprint distance, the more the optimal F-v profile is oriented to force capabilities and vice versa. When applying this model to the data of 231 athletes from very different sports, differences between optimal and actual F-v profile were observed and depend more on the variability in the optimal F-v profile between sprint distances than on the interindividual variability in F-v profiles. For a given sprint distance, acceleration performance (<30 m) mainly depends on P H max and slightly on the difference between optimal and actual F-v profile, the weight of each variable changing with sprint distance. Sprint acceleration performance is determined by both maximization of the horizontal power output capabilities and the optimization of the mechanical F-v profile of sprint propulsion.
Asunto(s)
Rendimiento Atlético , Carrera , Aceleración , Atletas , Fenómenos Biomecánicos , HumanosRESUMEN
This study aimed to quantify the validity and reliability of load-velocity (LV) relationship of hill sprinting using a range of different hill gradients and to describe the effect of hill gradient on sprint performance. Twenty-four collegiate-level athletes performed a series of maximal sprints on either flat terrain or hills of gradients 5.2, 8.8 and 17.6%. Velocity-time curves were recorded using a radar device. LV relationships were established using the maximal velocity achieved in each sprinting condition, whilst force-velocity-power (FVP) profiles were established using only the flat terrain sprint. LV profiles were shown to be valid (R2 = 0.99) and reliable (TE < 4.4%). For every 1-degree increase in slope, subjects' velocity decreased by 1.7 ± 0.1% on average. All the slopes used represented low resistance relative to the entire LV spectrum (<25% velocity loss). Subjects who exhibited greater horizontal force output at higher velocities on flat terrain were most affected by the gradient of the hill. Hills of gradients up to 17.6% do not provide sufficient resistance to optimize power development. However, such hills could be used to develop late-stage technical ability, due to the prolonged horizontally oriented body position that occurs as subjects attempt to overcome the acceleration due to gravity.
Asunto(s)
Rendimiento Atlético , Carrera , Aceleración , Atletas , Fenómenos Biomecánicos , Humanos , Reproducibilidad de los ResultadosRESUMEN
To directly compare five commonly used on-field systems (motorized linear encoder, laser, radar, global positioning system, and timing gates) during sprint acceleration to (i) measure velocity−time data, (ii) compute the main associated force−velocity variables, and (iii) assess their respective inter-trial reliability. Eighteen participants performed three 40 m sprints, during which five systems were used to simultaneously and separately record the body center of the mass horizontal position or velocity over time. Horizontal force−velocity mechanical outputs for the two best trials were computed following an inverse dynamic model and based on an exponential fitting of the position- or velocity-time data. Between the five systems, the maximal running velocity was close (7.99 to 8.04 m.s−1), while the time constant showed larger differences (1.18 to 1.29 s). Concurrent validity results overall showed a relative systematic error of 0.86 to 2.28% for maximum and theoretically maximal velocity variables and 4.78 to 12.9% for early acceleration variables. The inter-trial reliability showed low coefficients of variation (all <5.74%), and was very close between all of the systems. All of the systems tested here can be considered relevant to measure the maximal velocity and compute the force−velocity mechanical outputs. Practitioners are advised to interpret the data obtained with either of these systems in light of these results.
Asunto(s)
Rendimiento Atlético , Carrera , Humanos , Aceleración , Fenómenos Biomecánicos , Reproducibilidad de los ResultadosRESUMEN
ABSTRACT: Le Scouarnec, J, Samozino, P, Andrieu, B, Thubin, T, Morin, JB, and Favier, FB. Effects of repeated sprint training with progressive elastic resistance on sprint performance and anterior-posterior force production in elite young soccer players. J Strength Cond Res 36(6): 1675-1681, 2022-This study aimed to determine whether repeated sprint training with progressive high elastic resistance could improve sprint performance and anterior-posterior (AP) force production capacities of elite young soccer players. Seven elite U19 soccer players underwent 10 sessions of elastic-resisted repeated sprints on 8 weeks, whereas 8 U17 players from the same academy (control group) followed the same protocol without elastic bands. Sprint performance and mechanical parameters were recorded on a 30-m sprint before and after training. The control group did not show change for any of the measured variables. In contrast, the elastic-resisted training resulted in a significant improvement of the sprint time (-2.1 ± 1.3%; p = 0.026; Hedges' g = -0.49) and maximal velocity (Vmax; +3.9 ± 2%; p = 0.029; Hedges' g = 0.61) reached during the 30-m sprint. These enhancements were concurrent with an increase in the maximal power output related to AP force (Pmax; +4.9 ± 5.1%%; p = 0.026; Hedges' g = 0.42). Although the theoretical maximal AP force (F0) remained unchanged in both groups, there was a medium but nonsignificant increase in theoretical maximal velocity (V0; +3.7 ± 2.5%; p = 0.13; Hedges' g = 0.5) only in the elastic group. Therefore, the present results show that sprint capacity of elite young soccer players can be further improved by adding incremental resistance against runner displacement to raise the ability to produce AP force, rather at high velocity in the final phase of the acceleration.
Asunto(s)
Rendimiento Atlético , Carrera , Fútbol , Aceleración , Humanos , Modalidades de FisioterapiaRESUMEN
ABSTRACT: Morin, JB, Capelo-Ramirez, F, Rodriguez-Pérez, MA, Cross, MR, and Jimenez-Reyes, P. Individual adaptation kinetics following heavy resisted sprint training. J Strength Cond Res 36(4): 1158-1161, 2022-The aim of this study was to test individual adaptation kinetics to a high-resistance sprint training program designed to improve maximal horizontal power (Pmax), and compare the group and individual results of a classical "pre-post" analysis, and a "pre-peak" approach. Thirteen male and 9 female trained sprinters had their 30-m sprint performance and mechanical outputs assessed 1 week before (PRE), and one (POST, W1), 2 (W2), 3 (W3) and 4 (W4) weeks after a 10-week training block (10 repetitions of 20-m resisted sprints at the load associated to the apex of their velocity-power relationship: i.e., 90 ± 10% body mass on average (range: 75-112%). We observed clearly different outcomes on all variables for the PRE-POST vs. PRE-PEAK analyses. The PRE-PEAK analysis showed a larger (almost double) increase in Pmax (9.98 ± 5.27% on average, p < 0.01) than the PRE-POST (5.39 ± 5.87%, p < 0.01). Individual kinetics of post-training adaptations show that peak values were not captured in the POST (W1) assessment (generally observed at W3 and W4). Finally, the week of greatest Pmax output differed strongly among subjects, with most subjects (7/22) peaking at W4. In conclusion, after a 10-week high-resistance sprint training block, a classical 1-week-PRE to 1-week-POST assessment could not capture peak adaptation, which differed among athletes. Adopting a similar approach in practice or research should improve insight into the true effects of training stimuli on athletic capabilities.
Asunto(s)
Rendimiento Atlético , Entrenamiento de Fuerza , Carrera , Atletas , Femenino , Humanos , Cinética , Masculino , Entrenamiento de Fuerza/métodosRESUMEN
ABSTRACT: Jiménez-Reyes, P, Garcia-Ramos, A, Párraga-Montilla, JA, Morcillo-Losa, JA, Cuadrado-Peñafiel, V, Castaño-Zambudio, A, Samozino, P, and Morin, J-B. Seasonal changes in the sprint acceleration force-velocity profile of elite male soccer players. J Strength Cond Res 36(1): 70-74, 2022-This study aimed to describe the seasonal changes in the sprint force-velocity (Fv) profile of professional soccer players. The sprint Fv profile of 21 male soccer players competing in the first division of the Spanish soccer league was evaluated 6 times: preseason 1 (September 2015), in-season 1 (November 2015), in-season 2 (January 2016), in-season 3 (March 2016), in-season 4 (May 2016), and preseason 2 (August 2016). No specific sprint capabilities stimuli other than those induced by soccer training were applied. The following variables were calculated from the velocity-time data recorded with a radar device during an unloaded sprint: maximal force (F0), maximal velocity (v0), Fv slope, maximal power (Pmax), decrease in the ratio of horizontal-to-resultant force (DRF), and maximal ratio of horizontal-to-resultant force (RFpeak). F0 (effect size [ES] range = 0.83-0.93), Pmax (ES range = 0.97-1.05), and RFpeak (ES range = 0.56-1.13) were higher at the in-seasons 2 and 3 compared with both preseasons (p ≤ 0.006). No significant differences were observed for v0, Fv slope, and DRF (p ≥ 0.287). These results suggest that relevant Fv profile variables may be compromised (F0 more compromised than v0) toward the end of the competitive season when specific sprint stimuli are not systematically applied.
Asunto(s)
Rendimiento Atlético , Carrera , Fútbol , Aceleración , Humanos , Masculino , Estaciones del AñoRESUMEN
The aim of this pilot study was to analyze the potential association of a novel multifactorial hamstring screening protocol with the occurrence of hamstring muscle injuries (HMI) in professional football. 161 professional male football players participated in this study (age: 24.6 ± 5.36 years; body-height: 180 ± 7.07 cm; body-mass: 77.2 ± 7.70 kg). During the pre- and mid-season, players performed a screening protocol consisting of 11 tests aimed to evaluate their performance in regards to four main musculoskeletal categories: posterior chain strength, sprint mechanical output, lumbopelvic control and range of motion. Univariable cox regression analysis showed no significant association between the isolated test results and new HMI occurrence during the season (n = 17) (p > 0.05). When including injuries that took place between the pre- and mid-season screenings (~90 days), maximal theoretical horizontal force (F0) was significantly associated with higher HMI risk between pre- and mid-season evaluations (n = 14, hazard ratio; 4.02 (CI95% 1.08 to 15.0, p = 0.04). This study identified that 1) no single screening test was sufficient to identify players at risk of HMI within the entire season, while 2) low F0 was associated with increased risk of HMI when occurring closer to the moment of screening. The present results support the potential relevance of additionally including frequent F0 testing for HMI risk reduction management. Replication studies are needed in larger cohorts for more accurate interpretations on "univariable and multivariable levels levels. Finally, future studies should explore whether improving F0 is relevant within a multifactorial HMI risk reduction approach.
RESUMEN
Specific force capacities might be a limiting factor for alpine skiing performance, yet there is little consensus on the capabilities in question, and whether they differ between disciplines. We aimed to test discipline (speed and technical) and performance (event-specific world standing) effects on lower limb force-production qualities. National-level skiers (N = 31) performed loaded squat jumps and isometric mid-thigh pulls to detect dynamic force output at extremely low and high velocities and maximum isometric force and rate of force development, respectively. Discipline differences were assessed via a general linear model including performance and allowing for interaction effects, with performance associations further characterized via distinct Pearson's correlations. Jump height did not differentiate disciplines, with absolute power slightly higher in speed athletes (F(1,27) = 4.42, P = .045, ω2 = 0.10), and neither variables were related to performance. Speed athletes possessed greater dynamic force at low velocities (F0 ; F(1,27) = 13.8, P < .001, ω2 = 0.17), and greater relative and absolute maximum isometric force (F(1,25) = 11.19-20.70, ω2 = 0.16-0.22, P < .003). Overall, higher ranked athletes possessed more force-dominant profiles (F(1,27) = 16.28, ω2 = 0.34; r = 0.60 to 0.67, P < .001) and increased rate of force development characteristics (average and maximum, r = -0.50 to -0.82, P < .048). Very robust associations existed between maximum isometric force and speed performance (r = -0.88, P < .001), but only a trend for higher absolute isometric force in technical athletes (r = -0.49, P = .052). Alpine skiers display a preponderance for dynamic force output at low velocities, and isometric force for speed athletes, which highlights the interest in specific assessment and conditioning practices for ski athletes.
Asunto(s)
Rendimiento Atlético/fisiología , Contracción Isométrica/fisiología , Extremidad Inferior/fisiología , Fuerza Muscular/fisiología , Esquí/fisiología , Adulto , Prueba de Esfuerzo , Humanos , Masculino , Adulto JovenRESUMEN
PURPOSE: Theoretical 100-m performance times (t100-m) of a top athlete at Mexico-City (2250 m a.s.l.), Alto-Irpavi (Bolivia) (3340 m a.s.l.) and in a science-fiction scenario "in vacuo" were estimated assuming that at the onset of the run: (i) the velocity (v) increases exponentially with time; hence (ii) the forward acceleration (af) decreases linearly with v, iii) its time constant (τ) being the ratio between vmax (for af = 0) and af max (for v = 0). METHODS: The overall forward force per unit of mass (Ftot), sum of af and of the air resistance (Fa = k v2, where k = 0.0037 J·s2·kg-1·m-3), was estimated from the relationship between af and v during Usain Bolt's extant world record. Assuming that Ftot is unchanged since the decrease of k at altitude is known, the relationships between af and v were obtained subtracting the appropriate Fa values from Ftot, thus allowing us to estimate in the three conditions considered vmax, τ, and t100-m. These were also obtained from the relationship between mechanical power and speed, assuming an unchanged mechanical power at the end of the run (when af ≈ 0), regardless of altitude. RESULTS: The resulting t100-m amounted to 9.515, 9.474, and 9.114 s, and to 9.474, 9.410, and 8.981 s, respectively, as compared to 9.612 s at sea level. CONCLUSIONS: Neglecting science-fiction scenarios, t100-m of a world-class athlete can be expected to undergo a reduction of 1.01 to 1.44% at Mexico-City and of 1.44 to 2.10%, at Alto-Irpavi.
Asunto(s)
Altitud , Rendimiento Atlético/fisiología , Metabolismo Energético/fisiología , Carrera/fisiología , Aceleración , Atletas , Gravitación , HumanosRESUMEN
BACKGROUND: Achilles tendinopathy (AT) is a common overuse injury in running-related sports where patients experience pain and impaired function which can persist. A graded rehabilitation program has been successful in reducing pain and improving function to enable a return to sport. The aim of this study is to compare the effectiveness of a criteria-based rehabilitation program including strength and reactive strength targets, with a previously successful rehabilitation program on changes in pain and function using the Victorian Institute of Sport Assessment-Achilles (VISA-A) questionnaire. Secondary aims will be to assess changes in calf strength, reactive strength, and lower limb running and forward hop biomechanics over the course of a 12-week rehabilitation program, and long-term follow-up investigations. METHODS: Sixty eligible participants with chronic mid-portion AT who train in running-based sports will be included in this study. They will be randomly assigned to a group that will follow an evidence-based rehabilitation program of daily exercises with progression guided by symptoms or a group performing 3 high-intensity rehabilitation sessions per week with individualised load targets progressing to reactive strength exercises. Testing will take place at baseline, week 6 and 12. Plantar flexor peak torque will be measured using isokinetic dynamometry, reactive strength will be measured using a drop jump and lower limb biomechanical variables will be measured during a single leg forward hurdle hop test and treadmill running using 3D motion analysis. Follow-up interviews will take place at 6, 12 and 24 months after beginning the program which will assess patient participation in sport and possible re-injury. DISCUSSION: This is the first study to propose an individualised criteria-based graded rehabilitation program in patients in with chronic mid-portion Achilles tendinopathy where progression is guided by strength and reactive strength outcome measures. This study will provide a comprehensive assessment of plantar flexor strength, reactive strength and lower limb biomechanical variables in running and forward hopping with the VISA-A questionnaire as the primary outcome measure and long term post-intervention follow-up assessments performed. TRIAL REGISTRATION: ClinicalTrials.gov (ID: NCT04384874 ). Registered retrospectively on April 23rd 2020.
Asunto(s)
Tendón Calcáneo , Carrera , Tendinopatía , Terapia por Ejercicio , Humanos , Ensayos Clínicos Controlados Aleatorios como Asunto , Estudios Retrospectivos , Tendinopatía/diagnóstico , Resultado del TratamientoRESUMEN
Comprehensive information regarding neuromuscular function, as assessed through force-velocity-power (FVP) profiling, is of importance for training optimization in athletes. However, neuromuscular function is highly task-specific, potentially governed by dissimilarity of the overall orientation of forceapplication. The hip thrust (HT) exercise is thought to be of relevance for sprinting considering its antero-posterior force orientation and considerable hip-extensor recruitment, however, the association between their respective FVP profiles remains unexplored. Therefore, to address the concept of force orientation specificity within FVP profiling, the maximal theoretical neuromuscular capabilities of 41 professional male footballers (22.1 ± 4.1 years, 181.8 ± 6.4 cm, 76.4 ± 5.5 kg) were assessed during sprint acceleration, squat jumping (SJ) and the HT exercise. No significant associations were observed for maximal theoretical force or velocity between the three FVP profiling modalities, however, maximal theoretical power (Pmax) was correlated between sprinting and SJ (r = 0.73, P < 0.001) and HT and SJ (r = 0.44, P = 0.01), but not between sprinting and HT (r = 0.18, P = 0.36). In conclusion, although Pmax may be considered a somewhat universal lower-extremity capability, neuromuscular function is associated with substantial task-specificity not solely governed by the overall direction of force orientation.
Asunto(s)
Rendimiento Atlético/fisiología , Ejercicio Pliométrico , Carrera/fisiología , Fútbol/fisiología , Adolescente , Adulto , Humanos , Masculino , Adulto JovenRESUMEN
In jumping, countermovement increases net propulsive force and improves performance. We aimed to test whether this countermovement effect is velocity specific and examine the degree to which this varies between athletes, sports or performance levels. Force-velocity profiles were compiled in high-level skiers (N= 23) and sprinters (N= 30), with their performance represented in their overall world ranking and season-best 100 m time, respectively. Different ratios between force-velocity variables were computed from squat and countermovement jumps (smaller = less effect): jump height (CRh), maximum power (CRP), force (CRF), and velocity (CRv). Countermovement effect differed per velocity (inverse relationship between CRF and CRv, rs = -0.74, p< .001), and variation force-velocity profiles with countermovement. Skiers exhibited smaller CRF (rrb = -0.675, p< .001), sprinters smaller CRv (rrb = 0.426, p= .008), and "moderate" velocity conditions did not differentiate groups (CRP or CRh, p> .05). 33% of the variance in skiers' performance level was explained by greater maximum force and a lower CRF (i.e., high explosiveness at low-velocities without countermovement), without an association for sprinters. Countermovement effect appears specific to movement velocity, sport and athlete level. Consequently, we advise sports-specific assessment, and potentially training to reduce the countermovement effect per the relevant velocity.
Asunto(s)
Rendimiento Atlético/fisiología , Movimiento/fisiología , Fuerza Muscular/fisiología , Carrera/fisiología , Esquí/fisiología , Prueba de Esfuerzo , Humanos , MasculinoRESUMEN
An association has been reported between dynamic anterior pelvic tilt (APT) and hamstring injuries; however, no research has examined if a training-based preventive intervention could alter APT. Therefore, the aim of the present study was to examine if a specific 6-week multimodal intervention, based on the theoretical influence of neighbouring joints and biomechanical interactions between muscles that are inserted to the pelvis, induced changes in APT, during walking gait, hamstring flexibility and trunk endurance. Thirty-five active healthy males volunteered for this single-blind controlled trial and were split into two groups based on baseline data: a control group (CG, n = 20, continued their normal physical activities), and an intervention group (IG, n = 15, performed the intervention programme for 18 sessions over 6 weeks). A significant (p = 0.001) decrease in the APT kinematics during gait, significant increase in the Active Knee Extension Test (p = 0.001), and a significant increase in trunk endurance performance for flexion (p = 0.001), extension (p = 0.001) and side bridge (p = 0.001) were observed, in IG after the 6-week programme, compared to CG.
Asunto(s)
Fenómenos Biomecánicos/fisiología , Marcha/fisiología , Músculos Isquiosurales/lesiones , Músculos Isquiosurales/fisiología , Huesos Pélvicos , Postura/fisiología , Adulto , Ejercicio Físico/fisiología , Humanos , Articulación de la Rodilla/fisiología , Masculino , Músculo Esquelético/fisiología , Rango del Movimiento Articular/fisiología , Método Simple Ciego , Factores de Tiempo , Torso/fisiología , Adulto JovenRESUMEN
PURPOSE: We determined whether running mechanics and leg muscle activity patterns for pre-activation (50 ms prior to foot contact) and loading (first half, second half and entire stance) phases vary between early, late and entire acceleration phases during repeated treadmill sprints. METHODS: Ten male athletes performed three sets of five 5-s sprint accelerations (25-s and 3-min recovery between sprints and sets, respectively) on an instrumented treadmill. Ground reaction forces and surface EMG data (root mean square values of vastus lateralis, rectus femoris, biceps femoris, gastrocnemius medialis, gastrocnemius lateralis and tibialis anterior muscles of the right leg) corresponding to early, late and entire acceleration (steps 2, 4 and 6; steps 8, 10 and 12; and all steps, respectively) have been compared. RESULTS: Independently of fatigue, vertical and horizontal forces, contact time, step length, and step frequency differed as running velocity increased over different sprint acceleration sections (all P < 0.05). For pre-activation, first half, second half and entire stance phases taken separately, each of the six studied muscles displayed specific main sprint number and analysis section effects (all P < 0.05). However, there was in general no significant interaction between sprint number and analysis section (all P > 0.27). CONCLUSION: During repeated treadmill sprints, ground reaction force variables and leg muscle activity patterns can vary between early, late and entire acceleration phases. Identification of neuro-mechanical adjustments across the gait cycle with fatigue, however, did not differ when considering all steps or only a few steps during the early or late acceleration phases.
Asunto(s)
Fenómenos Biomecánicos/fisiología , Pierna/fisiopatología , Músculo Esquelético/fisiología , Carrera/fisiología , Aceleración , Adulto , Atletas , Rendimiento Atlético/fisiología , Electromiografía/métodos , Prueba de Esfuerzo/métodos , Pie/fisiología , Marcha/fisiología , Humanos , MasculinoRESUMEN
PURPOSE: We determined the effect of custom foot orthotics manufactured from ethyl-vinyl acetate (EVA) and expanded thermoplastic polyurethane (TPU) materials, both compared to a control condition (CON; shoes only) during repeated sprints on running mechanical alterations. METHODS: Eighteen males performed eight, 5-s sprints with 25-s recovery on an instrumented sprint treadmill in three footwear conditions (EVA, TPU and CON). Mechanical data consisted of continuous (step-by-step) measurement of running kinetics and kinematics, which were averaged for each sprint for further analysis. RESULTS: Distance ran in 5 s decreased from first to last sprint (P < 0.001), yet with higher sprints 1-8 values for both EVA (P = 0.004) and TPU (P = 0.018) versus CON. Regardless of footwear condition, mean horizontal forces, step frequency, vertical and leg stiffness decreased from sprint 1 to sprint 8 (all P < 0.001). Duration of the propulsive phase was globally shorter for both EVA (P = 0.002) and TPU (P = 0.021) versus CON, while braking phase duration was similar (P = 0.919). In the horizontal direction, peak propulsive (P < 0.001), but not braking (P = 0.172), forces also decreased from sprint 1 to sprint 8, independently of conditions. CONCLUSION: Compared to shoe only, wearing EVA or TPU custom foot orthotics improved repeated treadmill sprint ability, yet provided similar fatigue-induced changes in mechanical outcomes.
Asunto(s)
Rendimiento Atlético/fisiología , Fenómenos Biomecánicos/fisiología , Carrera/fisiología , Adulto , Atletas , Prueba de Esfuerzo/métodos , Fatiga/fisiopatología , Ortesis del Pié , Humanos , MasculinoRESUMEN
This study aimed 1) to examine the validity of inertial measurement unit (IMU)-based hip flexion strength test, and 2) to investigate the hip flexion strength test as an indicator of sprint performance. Eight males performed five repeated hip flexion-extension, while leg motion was recorded using an IMU and a motion capture system (Mocap). As the second experiment, 24 male athletes performed the IMU-based hip flexion strength test and sprinted 50 m, during which step-to-step ground reaction force (GRF) was recorded. The strength test variables were calculated using IMU and Mocap data including angular impulse, mean moment, and positive and negative work and power. Using GRF data, step-to-step spatiotemporal variables were obtained. The results showed high intra-class correlation coefficient and correlation coefficient (both >0.909) between IMU and Mocap for angular impulse, mean moment, positive work and power. The hip flexion mean moment showed significant correlation with running speed from the 5th-8th step section onwards. The angular impulse, mean moment, positive work and power are recommended to be used for the IMU-based hip flexion strength test variables in terms of accuracy and validity. Moreover, the proposed IMU-based hip flexion strength test can be an indicator for better sprinting performance.