Vanadium Alumanyl Complex: Synthesis, Characterization, Reactivity, and Application as a Catalyst for C-H Alumanylation of Alkenes.

A complex containing a V-Al bond is described. This species can be prepared by either transmetalation of a previously disclosed alumanylpotassium with Cp2VCl or photolytic oxidative alumination of Cp2V using the corresponding dialumane. Reaction of the resulting V-Al complex with H2 gave a Cp2V-dihydridoaluminate complex. These complexes were studied with X-ray crystallography, vanadium K-edge XANES spectroscopy, and DFT calculations. Finally, the reactivity of these molecules was studied opening the way to a catalytic C-H alumanylation of alkenes.

Mechanochemical Synthesis of Non-Solvated Dialkylalumanyl Anion and XPS Characterization of Al(I) and Al(II) Species.

A non-solvated alkyl-substituted Al(I) anion dimer was synthesized by a reduction of haloalumane precursor using a mechanochemical method. The crystallographic and theoretical analysis revealed its structure and electronic properties. Experimental XPS analysis of the Al(I) anions with reference compounds revealed the lower Al 2p binding energy corresponds to the lower oxidation state of Al species. It should be emphasized that the experimentally obtained XPS binding energies were reproduced by delta SCF calculations and were linearly correlated with NPA charges and 2p orbital energies.

Low-temperature redox activity and alcohol ammoxidation performance on Cu- and Ru-incorporated ceria catalysts.

Transition-metal-incorporated cerium oxides with Cu and a small amount of Ru (Cu0.18Ru0.05CeOz) were prepared, and their low-temperature redox performance (<423 K) and catalytic alcohol ammoxidation performance were investigated. Temperature-programmed reduction/oxidation under H2/O2 and in situ X-ray absorption fine structure revealed the reversible redox behavior of the three metals, Cu, Ru, and Ce, in the low-temperature redox processes. The initially reduced Ru species decreased the reduction temperature of Cu oxides and promoted the activation of Ce species. Cu0.18Ru0.05CeOz selectively catalyzed the production of benzonitrile in the ammoxidation of benzyl alcohol. H2-treated Cu0.18Ru0.05CeOz showed a slightly larger initial conversion of benzyl alcohol than O2-treated Cu0.18Ru0.05CeOz, suggesting that the reduced structure of Cu0.18Ru0.05CeOz was active for the ammoxidation. The integration of both Cu and Ru resulted in the efficient promotion of ammoxidation, in which the Ru species were involved in the conversion of benzyl alcohol and Cu species were required for selective production of benzonitrile.

Coordination-Induced Trigger for Activity: N-Heterocyclic Carbene-Decorated Ceria Catalysts Incorporating Cr and Rh with Activity Induction by Surface Adsorption Site Control.

A coordination-induced trigger for catalytic activity is proposed on an N-heterocyclic carbene (NHC)-decorated ceria catalyst incorporating Cr and Rh (ICy-r-Cr0.19Rh0.06CeOz). ICy-r-Cr0.19Rh0.06CeOz was prepared by grafting 1,3-dicyclohexylimidazol-2-ylidene (ICy) onto H2-reduced Cr0.19Rh0.06CeOz (r-Cr0.19Rh0.06CeOz) surfaces, which went on to exhibit substantial catalytic activity for the 1,4-arylation of cyclohexenone with phenylboronic acid, whereas r-Cr0.19Rh0.06CeOz without ICy was inactive. FT-IR, Rh K-edge XAFS, XPS, and photoluminescence spectroscopy showed that the ICy carbene-coordinated Rh nanoclusters were the key active species. The coordination-induced trigger for catalytic activity on the ICy-bearing Rh nanoclusters could not be attributed to electronic donation from ICy to the Rh nanoclusters. DFT calculations suggested that ICy controlled the adsorption sites of the phenyl group on the Rh nanocluster to promote the C-C bond formation of the phenyl group and cyclohexenone.

Reversible low-temperature redox activity and selective oxidation catalysis derived from the concerted activation of multiple metal species on Cr and Rh-incorporated ceria catalysts.

The ceria-based catalyst incorporated with Cr and a trace amount of Rh (Cr0.19Rh0.06CeOz) was prepared and the reversible redox performances and oxidation catalysis of CO and alcohol derivatives with O2 at low temperatures (<373 K) were investigated. In situ X-ray absorption fine structure (XAFS), ambient-pressure X-ray photoelectron spectroscopy (AP-XPS), high angle annular dark-field scanning transmission electron microscopy (HAADF-STEM)-EDS/EELS and temperature-programmed reduction/oxidation (TPR/TPO) revealed the structures and redox mechanisms of three metals in Cr0.19Rh0.06CeOz: dispersed Rh3+δ species (<1 nm) and Cr6-γO3-x nanoparticles (∼1 nm) supported on CeO2 in Cr0.19Rh0.06CeOz were transformed to Rh nanoclusters, Cr(OH)3 species and CeO2-x with two Ce3+-oxide layers at the surface in a concerted activation manner of the three metal species with H2.

Synthesis of A Pincer-IrV Complex with A Base-Free Alumanyl Ligand and Its Application toward the Dehydrogenation of Alkanes.

A pincer-iridium complex bearing a Lewis-base-free X-type alumanyl ligand has been synthesized. X-ray diffraction, NMR and IR spectroscopy, as well as XANES analysis confirmed its tetrahydrido-IrV structure and Lewis acidity at the Al center as supported by DFT calculations. The resulting complex was applied as a catalyst for the transfer dehydrogenation of cyclooctane.

N-Heterocyclic Carbene-Modified Au-Pd Alloy Nanoparticles and Their Application as Biomimetic and Heterogeneous Catalysts.

The preparation of water-soluble, N-heterocyclic-carbene-stabilized Au-Pd alloy nanoparticles by a straightforward ligand exchange process is presented. Extensive analysis revealed excellent size retention and stability over years in water. The alloy nanoparticles were applied as biomimetic catalysts for aerobic oxidation of d-glucose, for which monometallic Au and Pd nanoparticles showed no or negligible activity. The alloy nanoparticles were further applied as titania-supported heterogeneous catalysts for the mild hydrogenation of nitroarenes and the semihydrogenation of 1,2-diphenylacetylene with a solvent-dependent selectivity switch between E- and Z-stilbene.

Molecular Adsorbates Switch on Heterogeneous Catalysis: Induction of Reactivity by N-Heterocyclic Carbenes.

We report the N-heterocyclic carbene (NHC)-induced activation of an otherwise unreactive Pd/Al2O3 catalyst. Surface analysis techniques demonstrate the NHC being coordinated to the palladium particles and affecting their electronic properties. Ab initio calculations provide further insight into the electronic effect of the coordination with the NHC injecting electron density into the metal nanocluster thus lowering the barrier for bromobenzene activation. By this NHC modification, the catalyst could be successfully applied in the Buchwald-Hartwig amination of aryl chlorides, bromides, and iodides. Various heterogeneity tests could additionally show that the reaction proceeds via a heterogeneous active species.

Size Regulation and Stability Enhancement of Pt Nanoparticle Catalyst via Polypyrrole Functionalization of Carbon-Nanotube-Supported Pt Tetranuclear Complex.

A novel multiwall carbon nanotube (MWCNT) and polypyrrole (PPy) composite was found to be useful for preparing durable Pt nanoparticle catalysts of highly regulated sizes. A new pyrene-functionalized Pt4 complex was attached to the MWCNT surface which was functionalized with PPy matrix to yield Pt4 complex/PPy/MWCNT composites without decomposition of the Pt4 complex units. The attached Pt4 complexes in the composite were transformed into Pt0 nanoparticles with sizes of 1.0-1.3 nm at a Pt loading range of 2 to 4 wt %. The Pt nanoparticles in the composites were found to be active and durable catalysts for the N-alkylation of aniline with benzyl alcohol. In particular, the Pt nanoparticles with PPy matrix exhibited high catalyst durability in up to four repetitions of the catalyst recycling experiment compared with nonsize-regulated Pt nanoparticles prepared without PPy matrix. These results demonstrate that the PPy matrix act to regulate the size of Pt nanoparticles, and the PPy matrix also offers stability for repeated usage for Pt nanoparticle catalysis.

Tunable Heterogeneous Catalysis: N-Heterocyclic Carbenes as Ligands for Supported Heterogeneous Ru/K-Al2O3 Catalysts To Tune Reactivity and Selectivity.

Here we report, for the first time, an extensive characterization of an N-heterocyclic carbene (NHC)-modified supported heterogeneous catalyst. The existence of the metal-carbene bond could be proven by (13)C-SS-NMR experiments. Furthermore, it could be shown that the modification with NHCs does not structurally change the catalyst itself. The effect of the nature and the loading of the NHC on the activity and selectivity of the heterogeneous catalyst is presented by a hydrogenation study, finally leading to an NHC-enabled tunable heterogeneous catalyst for chemoselective hydrogenation.

Formation and nitrile hydrogenation performance of Ru nanoparticles on a K-doped Al2O3 surface.

Decarbonylation-promoted Ru nanoparticle formation from Ru3(CO)12 on a basic K-doped Al2O3 surface was investigated by in situ FT-IR and in situ XAFS. Supported Ru3(CO)12 clusters on K-doped Al2O3 were converted stepwise to Ru nanoparticles, which catalyzed the selective hydrogenation of nitriles to the corresponding primary amines via initial decarbonylation, the nucleation of the Ru cluster core, and the growth of metallic Ru nanoparticles on the surface. As a result, small Ru nanoparticles, with an average diameter of less than 2 nm, were formed on the support and acted as efficient catalysts for nitrile hydrogenation at 343 K under hydrogen at atmospheric pressure. The structure and catalytic performance of Ru catalysts depended strongly on the type of oxide support, and the K-doped Al2O3 support acted as a good oxide for the selective nitrile hydrogenation without basic additives like ammonia. The activation of nitriles on the modelled Ru catalyst was also investigated by DFT calculations, and the adsorption structure of a nitrene-like intermediate, which was favourable for high primary amine selectivity, was the most stable structure on Ru compared with other intermediate structures.

A solid chelating ligand: periodic mesoporous organosilica containing 2,2'-bipyridine within the pore walls.

Synthesis of a solid chelating ligand for the formation of efficient heterogeneous catalysts is highly desired in the fields of organic transformation and solar energy conversion. Here, we report the surfactant-directed self-assembly of a novel periodic mesoporous organosilica (PMO) containing 2,2'-bipyridine (bpy) ligands within the framework (BPy-PMO) from a newly synthesized organosilane precursor [(i-PrO)3Si-C10H6N2-Si(Oi-Pr)3] without addition of any other silane precursors. BPy-PMO had a unique pore-wall structure in which bipyridine groups were densely and regularly packed and exposed on the surface. The high coordination ability to metals was also preserved. Various bipyridine-based metal complexes were prepared using BPy-PMO as a solid chelating ligand such as Ru(bpy)2(BPy-PMO), Ir(ppy)2(BPy-PMO) (ppy = 2-phenylpyridine), Ir(cod)(OMe)(BPy-PMO) (cod = 1,5-cyclooctadiene), Re(CO)3Cl(BPy-PMO), and Pd(OAc)2(BPy-PMO). BPy-PMO showed excellent ligand properties for heterogeneous Ir-catalyzed direct C-H borylation of arenes, resulting in superior activity, durability, and recyclability to the homogeneous analogous Ir catalyst. An efficient photocatalytic hydrogen evolution system was also constructed by integration of a Ru-complex as a photosensitizer and platinum as a catalyst on the pore surface of BPy-PMO without any electron relay molecules. These results demonstrate the great potential of BPy-PMO as a solid chelating ligand and a useful integration platform for construction of efficient molecular-based heterogeneous catalysis systems.

Molecularly imprinted Ru complex catalysts integrated on oxide surfaces.

Selective catalysis is critical for the development of green chemical processes, and natural enzymes that possess specialized three-dimensional reaction pockets with catalytically active sites represent the most sophisticated systems for selective catalysis. A reaction space in an enzyme consists of an active metal center, functional groups for molecular recognition (such as amino acids), and a surrounding protein matrix to prepare the reaction pocket. The artificial design of such an integrated catalytic unit in a non-enzymatic system remains challenging. Molecular imprinting of a supported metal complex provides a promising approach for shape-selective catalysis. In this process, an imprinted cavity with a shape matched to a template molecule is created in a polymer matrix with a catalytically active metal site. In this Account, we review our studies on molecularly imprinted metal complex catalysts, focusing on Ru complexes, on oxide surfaces for shape-selective catalysis. Oxide surface-attached transition metal complex catalysts not only improve thermal stability and catalyst dispersion but also provide unique catalytic performance not observed in homogeneous precursors. We designed molecularly imprinted Ru complexes by using surface-attached Ru complexes with template ligands and inorganic/organic surface matrix overlayers to control the chemical environment around the active metal complex catalysts on oxide surfaces. We prepared the designed, molecularly imprinted Ru complexes on SiO(2) surfaces in a step-by-step manner and characterized them with solid-state (SS) NMR, diffuse-reflectance (DR) UV-vis, X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller isotherm (BET), X-ray fluorescence (XRF), and Ru K-edge extended X-ray absorption fine structure (EXAFS). The catalytic performances of these Ru complexes suggest that this process of molecular imprinting facilitates the artificial integration of catalytic functions at surfaces. Further advances such as the imprinting of a transition state structure or the addition of multiple binding sites could lead to systems that can achieve 100% selective catalysis.

Induced chirality at the surface: fixation of a dynamic M/P invertible helical Co3 complex on SiO2.

Dynamic M/P invertible helicity was successfully induced at a SiO2 surface immobilized with a dynamic helical trinuclear cobalt complex, [LCo3(NHMe2)6](OTf)3, using chiral ((R) or (S))-1-phenylethylamine. Solid-state CD spectra and theoretical calculations suggested that the fixation of the M/P helical complex on the surface via coordination interactions was the key factor of the induced chirality at the surface.

Comparative study of photochromic ferrocene-conjugated dimethyldihydropyrene derivatives.

The photochemical properties and the mixed-valence state of bis(ferrocenylethynyl)benzodimethyldihydropyrene (1) and other benzodimethyldihydropyrene (BzDHP) derivatives were investigated to understand the reversible photoswitching in the electronic communication of 1. Absorption spectra of 1 were characterized by UV/Vis spectroscopy and calculated by using time-dependent density functional theory (TD-DFT), and the d orbitals of the ferrocene (Fc) moieties were shown to contribute to the occupied valence orbitals that were responsible for the photochromic behavior. 1 exhibited reversible photoisomerization in THF; however, photochromic behavior was not observed in dichloromethane. Analysis of redox potentials showed that the mixed-valence state of 1 was more stable in dichloromethane than in THF. This is consistent with the observation that chemical oxidation led to an intervalence charge-transfer (IVCT) band between the Fc moieties in the mixed-valence state of 1 in dichloromethane, whereas such a band was not observed for one-electron-oxidized 1 in THF. Bis(pentamethylferrocenylethynyl)benzodimethyldihydropyrene (2) did not show photochromic behavior even in THF. The mixed-valence state of 2 was much less stable than that of 1 in dichloromethane, and no obvious IVCT band was observed for one-electron-oxidized 2 in dichloromethane. The difference in the redox contribution of Fc and pentamethylferrocene (Me5Fc) to BzDHP played an important role for these redox and photochromic behaviors; this was supported by analysis of valence orbital energies from DFT calculations. Designing molecules that connect redox centers through the use of a photochromic linker with a redox potential close to that of the redox centers could constitute a useful approach for the production of photochromic redox-active metal complexes with strong electronic communication.

Preparation and catalytic performances of a molecularly imprinted Ru-complex catalyst with an NH2 binding site on a SiO2 surface.

A catalyst surface with an active metal site, a shape-selective reaction space, and an NH(2) binding site for o-fluorobenzophenone was designed and prepared by the molecular imprinting of a supported metal complex on a SiO(2) surface. A ligand of a SiO(2)-supported Ru complex that has a similar shape to the product of o-fluorobenzophenone hydrogenation was used as a template. An NH(2) binding site for o-fluorobenzophenone was spatially arranged on the wall of a molecularly imprinted cavity with a similar shape to the template. The structures of the SiO(2)-supported and molecularly imprinted Ru catalysts were characterized in a step-by-step manner by means of solid-state magic angle spinning (MAS) NMR, XPS, UV/Vis, N(2) adsorption, XRF, and Ru K-edge EXAFS. The molecularly imprinted Ru catalyst exhibited excellent shape selectivity for the transfer hydrogenation of benzophenone derivatives. It was found that the NH(2) binding site on the wall of the molecularly imprinted cavity enhanced the adsorption of o-fluorobenzophenone, of which the reduction product was imprinted, whereas there was no positive effect in the case of o-methylbenzophenone, which cannot interact with the NH(2) binding site through hydrogen bonding.

Surface-assisted transfer hydrogenation catalysis on a γ-Al2O3-supported Ir dimer.

A novel oxide-supported Ir dimer, which was found to be active for transfer hydrogenation of aromatic ketones, was prepared on a γ-Al(2)O(3) surface from an Ir dimer complex [Ir(2){η(5)-C(5)(CH(3))(5)}(2)(µ-CH(2))(2)] (Ir(2)) with an Ir=Ir bond. Detailed characterization of the γ-Al(2)O(3)-supported Ir dimer (Ir(2)/γ-Al(2)O(3)) revealed that the structure of Ir(2) consisted of an Ir dimer with an Ir-Ir bond attached to the γ-Al(2)O(3) surface by two bridged Ir-(OAl)(2)-Ir bonds. The supported Ir(2)/γ-Al(2)O(3) dimer with bridged Ir-(OAl)(2)-Ir bonds acted as an efficient catalyst for transfer hydrogenation (turnover number of acetophenone = 699 (24 h)), while homogeneous Ir(2), SiO(2)- and MgO-supported Ir(2) were much less active. A structural transformation at the interface of the Ir dimer and the γ-Al(2)O(3) surface was suggested to assist the transfer hydrogenation catalysis via the formation of an Ir(2)-H(2) species on the γ-Al(2)O(3) surface (Ir(2)-H(2)/γ-Al(2)O(3)) as a key intermediate in the transfer hydrogenation. The present study deepened the understanding of the role and dynamic behaviour of the oxide surface in the hydrogen transfer catalysis on the supported Ir dimer.

Ultrafine Pt-Ni nanoparticles in hollow porous carbon spheres for remarkable oxygen reduction reaction catalysis.

Ultrafine bimetallic Pt-Ni nanoparticles, which catalyze the oxygen reduction reaction (ORR) efficiently, were successfully prepared in hollow porous carbon spheres (HPCSs) under the assistance of organic molecules. 2,2'-Dipyridylamine (dpa) was found to be most effective in preparing homogeneous small Pt-Ni nanoparticles (2.0 ± 0.4 nm) without the phase separation of Pt and Ni during synthesis, and the assistance of the organic molecules was investigated for the alloy nanoparticle formation. The Pt-Ni nanoparticle/HPCS catalyst synthesized in the presence of dpa exhibited remarkable electrochemical performance in the ORR showing a high mass activity of 3.25 ± 0.14 A mg-1Pt at 0.9 VRHE (13.5-fold higher relative to a commercial Pt/C catalyst), a large electrochemical surface area of 105 ± 8 m2 g-1Pt, and high durability. After 60 000 cycles of accelerated durability testing, the mass activity was still 12.3 times higher than that of the commercial Pt/C catalyst.

Ultrahigh Proton Conduction via Extended Hydrogen-Bonding Network in a Preyssler-Type Polyoxometalate-Based Framework Functionalized with a Lanthanide Ion.

The exploration of composition-structure-function relationship in proton-conducting solids remains a challenge in materials chemistry. Polyoxometalate-based compounds have been long considered as candidates for proton conductors; however, their low structural stability and a large decrease in conductivity under reduced relative humidity (RH) have limited their applications. To overcome such limitations, the hybridization of polyoxometalates with proton-conducting polymers has emerged as a promising method. Besides, 4f lanthanide ions possess a high coordination number, which can be utilized to attract water molecules and to build robust frameworks. Herein, a Preyssler-type polyoxometalate functionalized with a 9-coordinate Eu3+ (Eu[P5W30O110K]11-) is newly synthesized and combined with poly(allylamine) with amine moieties as protonation sites. The resulting robust crystalline composite exhibits an ultrahigh proton conductivity >10-2 S cm-1 at 368 K and 90% RH, which is still >10-3 S cm-1 at 50% RH, due to the strengthened and extended hydrogen-bonding network.

Alternative selective oxidation pathways for aldehyde oxidation and alkene epoxidation on a SiO2-supported Ru-monomer complex catalyst.

We have prepared a novel Ru-mononer complex supported on a SiO(2) surface by using a Ru-monomer complex precursor with a p-cymene ligand, which was found to be highly active for the selective oxidation of aldehydes and the epoxidation of alkenes using O(2). The structure of the supported Ru catalyst was characterized by means of FT-IR, solid-state NMR, diffuse-reflectance UV/vis, XPS, Ru K-edge EXAFS, and DFT calculations, which demonstrated the formation of isolatedly located, unsaturated Ru centers behind a p-cymene ligand of the Ru-complex precursor. The site-isolated Ru-monomer complex on SiO(2) achieved tremendous TONs (turnover numbers) for the selective oxidation of aldehydes and alkenes; e.g. TONs of 38,800,000 for selective isobutyraldehyde (IBA) oxidation and 2,100,000 for trans-stilbene epoxidation at ambient temperature, which are among the highest TONs in metal-complex catalyzes to our knowledge. We also found that the IBA sole oxidation with an activation energy of 48 kJ mol(-1) much more facile than the trans-stilbene epoxidation with an activation energy of 99 kJ mol(-1) was completely suppressed by the coexistence of trans-stilbene. The switchover of the selective oxidation pathways from the IBA oxidation to the trans-stilbene epoxidation was explained in terms of energy profiles for the alternative selective oxidation pathways, resulting in the preferential coordination of trans-stilbene to the Ru-complex at the surface. This aspect gives an insight into the origin of the efficient catalysis for selective epoxidation of alkenes with IBA/O(2).