An apparatus for probing multipactor in X-band waveguide components.

Rectangular waveguides are susceptible to avalanche-style breakdown via the multipactor phenomenon. The growth in secondary electron density produced via multipactor can damage and destroy RF components. A pulse-adjustable, hard-switched modulator powering an X-band magnetron was utilized to drive a modular experimental setup that enables testing different surface geometries and coatings. Power measurements, taken via diodes, and phase measurements, facilitated via a double-balanced mixer, were integrated into the overall apparatus enabling multipactor detection with high sensitivity and nanosecond temporal resolution. The utilized 150 kW peak microwave source with 2.5 µs pulse width and 100 Hz repetition frequency allows for threshold testing without the need for initial electron seeding. This paper includes the initial results of surface conditioning of the test multipactor gap via electron bombardment.

Direct observation of electrons in microwave vacuum components.

Apparatus which is used to directly observe electrons in microwave vacuum components was designed and implemented into a WR-284 like waveguide operated at 2.85 GHz with up to approx. 1 MW power. To generate desired electric field levels for driving secondary emission, the waveguide structure is manipulated by reducing the test section height to 6 mm from the standard WR-284 rectangular waveguide height of 34 mm. Both test and standard sections were operated in the dominant TE10 mode. A 1 mm aperture was cut into the broadside wall of the waveguide section enabling a portion of electrons in the waveguide to enter a properly biased electron multiplier tube mounted atop of the test section. Waveforms are presented showing the direct measurement of electrons, providing a local detection method with nanosecond temporal resolution. Future work will incorporate the test setup for multipactor studies.

Identification of Cell-Free Circulating MicroRNAs for the Detection of Early Breast Cancer and Molecular Subtyping.

Early detection is crucial for achieving a reduction in breast cancer mortality. Analysis of circulating cell-free microRNAs present in the serum of cancer patients has emerged as a promising new noninvasive biomarker for early detection of tumors and for predicting their molecular classifications. The rationale for this study was to identify subtype-specific molecular profiles of cell-free microRNAs for early detection of breast cancer in serum. Fifty-four early-stage breast cancers with 27 age-matched controls were selected for circulating microRNAs evaluation in the serum. The 54 cases were molecularly classified (luminal A, luminal B, luminal B Her2 positive, Her-2, triple negative). NanoString platform was used for digital detection and quantitation of 800 tagged microRNA probes and comparing the overall differences in serum microRNA expression from breast cancer cases with controls. We identified the 42 most significant (P ≤ 0.05, 1.5-fold) differentially expressed circulating microRNAs in each molecular subtype for further study. Of these microRNAs, 19 were significantly differentially expressed in patients presenting with luminal A, eight in the luminal B, ten in luminal B HER 2 positive, and four in the HER2 enriched subtype. AUC is high with suitable sensitivity and specificity. For the triple negative subtype miR-25-3p had the best accuracy. Predictive analysis of the mRNA targets suggests they encode proteins involved in molecular pathways such as cell adhesion, migration, and proliferation. This study identified subtype-specific molecular profiles of cell-free microRNAs suitable for early detection of breast cancer selected by comparison to the microRNA profile in serum for female controls without apparent risk of breast cancer. This molecular profile should be validated using larger cohort studies to confirm the potential of these miRNA for future use as early detection biomarkers that could avoid unnecessary biopsy in patients with a suspicion of breast cancer.

Immunoglobulin G responses in 21 dogs with skin diseases to antigens from different isolates of Staphylococcus intermedius.

The aim of this study was to characterise the immunoglobulin G (IgG) response in 21 dogs with or without pyoderma to antigens from six isolates of Staphylococcus intermedius. The staphylococcal proteins were separated by sodium dodecyl sulphate polyacrylamide gel electrophoresis, transferred electrophoretically on to a membrane and subjected to immunoblotting with the dogs' serum. Gels containing separated proteins from the six isolates revealed 29 to 33 distinct bands with molecular weights ranging from 20 to 230 kDa. All the dogs' sera contained IgG that recognised 12 to 24 bands (mean 17), regardless of whether the dogs had pyoderma. The recognised proteins had molecular weights ranging from 20 to 198 kDa but the majority had molecular weights below 75 kDa. The most intense band in all six isolates had a molecular weight of 28 to 29 kDa. The antibody responses to the six isolates were essentially similar except that there were significantly more bands in the response to isolate 2 than to isolate 6, and occasional differences in the intensity of individual bands. All 21 dogs mounted an IgG response to multiple antigens in S intermedius, which differed only marginally between the six isolates. This lack of variation provides evidence that the host's response to different isolates of S intermedius is not a major factor in canine pyoderma.

A software controllable modular RF signal generator with multichannel transmission capabilities.

A software controllable system which generates and transmits user defined RF signals is discussed. The system is implemented with multiple, modular transmitting channels that allow the user to easily replace parts such as amplifiers or antennas. Each channel is comprised of a data pattern generator (DPG), a digital to analog converter (DAC), a power amplifier, and a transmitting antenna. All channels are controlled through a host PC and synchronized through a master clock signal provided to each DAC by an external clock source. Signals to be transmitted are generated through the DPG control software on the PC or can be created by the user in a numerical computing environment. Three experiments are discussed using a two- and four-channel antenna array incorporating Chebyshev tapered TEM horn antennas. Transmitting distinct sets of nonperiodic bipolar impulses through each of the antennas in the array enabled synthesizing a sinusoidal signal of specific frequency in free space. Opposite to the standard phased array approach, each antenna radiates a distinctly different signal rather than the same signal simply phase shifted. The presented approach may be employed as a physical layer of encryption dependent on the position of the receiving antenna.

Investigation of a stripline transmission line structure for gyromagnetic nonlinear transmission line high power microwave sources.

A stripline gyromagnetic nonlinear transmission line (NLTL) was constructed out of yttrium iron garnet ferrite and tested at charge voltages of 35 kV-55 kV with bias fields ranging from 10 kA/m to 20 kA/m. Typically, high power gyromagnetic NLTLs are constructed in a coaxial geometry. While this approach has many advantages, including a uniform transverse electromagnetic (TEM) mode, simple interconnection between components, and the ability to use oil or pressurized gas as an insulator, the coaxial implementation suffers from complexity of construction, especially when using a solid insulator. By moving to a simpler transmission line geometry, NLTLs can be constructed more easily and arrayed on a single substrate. This work represents a first step in exploring the suitability of various transmission line structures, such as microstrips and coplanar waveguides. The resulting high power microwave (HPM) source operates in ultra high frequency (UHF) band with an average bandwidth of 40.1% and peak rf power from 2 MW to 12.7 MW.

Characteristics of a four element gyromagnetic nonlinear transmission line array high power microwave source.

In this paper, a solid-state four element array gyromagnetic nonlinear transmission line high power microwave system is presented as well as a detailed description of its subsystems and general output capabilities. This frequency agile S-band source is easily adjusted from 2-4 GHz by way of a DC driven biasing magnetic field and is capable of generating electric fields of 7.8 kV/m at 10 m correlating to 4.2 MW of RF power with pulse repetition frequencies up to 1 kHz. Beam steering of the array at angles of ±16.7° is also demonstrated, and the associated general radiation pattern is detailed.

A high power microwave triggered RF opening switch.

A 4-port S-band waveguide structure was designed and fabricated such that a signal of any amplitude (less than 1 MW) can be switched from a normally closed state, <0.5 dB insertion loss (IL), to an open state >30 dB IL by initiating plasma in a gas cell situated at the junction of this waveguide and one propagating a megawatt level magnetron pulse. The 90/10 switching time is as low as 20 ns with a delay of ∼30 ns between the onset of the high power microwave pulse and the initial drop of the signal. Two ports of this device are for the high power triggering pulse while the other two ports are for the triggered signal in a Moreno-like coupler configuration. In order to maintain high isolation, these two sets of waveguides are rotated 90° from each other with a TE111 resonator/plasma cell located at the intersection. This manuscript describes the design and optimization of this structure using COMSOL 4.4 at the design frequency of 2.85 GHz, comparison of simulated scattering parameters with measured "cold tests" (testing without plasma), and finally the temporal waveforms of this device being used to successfully switch a low power CW signal from 2 W to <5 mW on a sub-microsecond timescale.

Material selection of a ferrimagnetic loaded coaxial delay line for phasing gyromagnetic nonlinear transmission lines.

Implementing nonlinear transmission line (NLTL) technology in the design of a high power microwave source has the benefits of producing a comparatively small and lightweight solid-state system where the emission frequency is easily tuned. Usually, smaller in physical size, single NLTLs may produce significantly less power than its vacuum based counterparts. However, combining individual NLTL outputs electrically or in free-space is an attractive solution to achieve greater output power. This paper discusses a method for aligning a four element NLTL antenna array with coaxial geometry using easily adjustable temporal delay lines. These delay lines, sometimes referred to as pulse shock lines or pulse sharpening lines, are placed serially in front of the main NLTL line. The propagation velocity in each delay line is set by the voltage amplitude of an incident pulse as well as the magnetic field bias. Each is adjustable although for the system described in this paper, the voltage is held constant while the bias is changed through applying an external DC magnetic field of varying magnitude. Three different ferrimagnetic materials are placed in the temporal delay line to evaluate which yields the greatest range of electrical delay with the least amount of variability from consecutive shots.

Optically isolated, 2 kHz repetition rate, 4 kV solid-state pulse trigger generator.

This paper presents the design and operation characteristics of a solid-state high voltage pulse generator. Its primary utilization is aimed at triggering a gaseous spark gap with high repeatability. Specifically, the trigger generator is designed to achieve a risetime on the order of 0.1 kV/ns to trigger the first stage, trigatron spark gap of a 10-stage, 500 kV Marx generator. The major design components are comprised of a 60 W constant current DC-DC converter for high voltage charging, a single 4 kV thyristor, a step-up pulse transformer, and magnetic switch for pulse steepening. A risetime of <30 ns and pulse magnitude of 4 kV is achieved matching the simulated performance of the design.

Interspecies comparison of rat and hamster alveolar macrophage antioxidative and oxidative capacity.

Generation of oxidants has been implicated in lung injury and disease caused by a variety of inhaled agents such as ozone, particles, and mineral fibers. Antioxidants in the pulmonary system presumably provide the initial defense against such oxidants. We designed the present study to assess the oxidative and antioxidative capacity of alveolar macrophages (AM) from rats and hamsters. These two laboratory animal species commonly used in biomedical research are well known for their disparate response to pulmonary irritants/toxicants. AM from CD rats and Syrian golden hamsters were obtained by bronchoalveolar lavage. We assessed AM antioxidant levels by measuring the catalase and superoxide dismutase (SOD) activity and the intracellular concentrations of total glutathione, ascorbic acid, and alpha-tocopherol. We determined the AM oxidative capacity by assessing the ability of AM to oxidize extracellular glutathione (GSH) and to release superoxide anions. There were no significant differences in the intracellular antioxidant levels, except for catalase activity that was significantly (p < 0.05) higher in hamster AM than in rat AM. However, AM oxidative capacity was markedly different between the two species studied. The amount of spontaneous and phorbol myristate acetate (PMA)-induced GSH oxidation was about 5-fold higher in rat AM than in hamster AM, whereas the PMA-induced superoxide anion release did not differ significantly between the two rodents. In summary, our data suggest that species variation exists between the oxidative capacity of rat and that of hamster AM. Whereas the oxidative capacity of hamster AM appears to be based mainly on the formation of reactive oxygen species, it is suggested that rat AM possess an additional oxidative system.

[Late metastasis of an extragonadal Leydig cell tumor]. / Spät-Metastasierung eines extragonadalen Leydig-Zelltumors.

The case of a 36-year-old patient who underwent extirpation of a Leydig cell tumor of the epididymis is presented. Five years later a retroperitoneal mass was removed, which was found to be a metastatic Leydig cell carcinoma. The literature conrains reports of only 32 cases of metastatic Leydig cell tumors, all of which had originated in the testis and not extragonadally. The symptoms, treatment and prognosis are discussed with reference to the literature.

Dermatitis and lymphadenitis resembling juvenile cellulitis in a four-year-old dog.

A four-year-old, entire male toy poodle was presented with a two-and-a-half-week history of ocular discharge progressing to periorbital alopecia, depigmentation, alopecia and ulceration around the muzzle. There was also a haemorrhagic discharge from the ears, pyrexia, lethargy and generalised lymphadenopathy. The clinical, cytological, bacteriological and histopathological findings were consistent with a diagnosis of dermatitis resembling juvenile cellulitis in an adult dog. Glucocorticoid therapy led to rapid resolution of the clinical signs and the dog has remained in remission for two years after cessation of treatment.

Semiempirical wide-range conductivity model with exploding wire verification.

Based on well-established physical relationships, a semiempirical set of equations dictating the electrical conductivity of dense, strongly coupled, partially ionized copper is presented. With the empirical coefficients, the model is tuned to experimental conductivity data obtained from exploding wire experiments [A. W. DeSilva and J. D. Katsouros, Phys. Rev. E 57, 5945 (1998)]. The result is a wide-range conductivity model, with demonstrated accuracy from room temperature-density conditions to 0.01 g/cm(3) and 30 kK. Using magnetohydrodynamic simulation the ability to utilize the conductivity model for predictive simulations is demonstrated. A complete electrical conductivity dataset for copper has been made available to the public.

System for time-discretized vacuum ultraviolet spectroscopy of spark breakdown in air.

A system for time-discretized spectroscopic measurements of the vacuum ultraviolet (VUV) emission from spark discharges in the 60-160 nm range has been developed for the study of early plasma-forming phenomena. The system induces a spark discharge in an environment close to atmospheric conditions created using a high speed puff value, but is otherwise kept at high vacuum to allow for the propagation of VUV light. Using a vertical slit placed 1.5 mm from the discharge the emission from a small cross section of the discharge is allowed to pass into the selection chamber consisting of a spherical grating, with 1200 grooves/mm, and an exit slit set to 100 µm. Following the exit slit is a photomultiplier tube with a sodium salicylate scintillator that is used for the time discretized measurement of the VUV signal with a temporal resolution limit of 10 ns. Results from discharges studied in dry air, Nitrogen, SF6, and Argon indicate the emission of light with wavelengths shorter than 120 nm where the photon energy begins to approach the regime of direct photoionization.

The effect of a spot-on formulation containing polyunsaturated fatty acids and essential oils on dogs with atopic dermatitis.

Recent studies have shown that immunological aberrations and epidermal barrier defects could be important in the pathogenesis of canine atopic dermatitis (CAD) and that oral polyunsaturated fatty acids (PUFAs) might influence the epidermal barrier. The aim of this study was to evaluate the effects of a spot-on formulation containing PUFAs and essential oils on pruritus and lesions caused by CAD. Forty-eight privately owned dogs of different breeds, ages and genders diagnosed with atopic dermatitis were included in a randomized, double-blinded, placebo-controlled, multicentre clinical trial. Dogs were treated with a spot-on formulation containing PUFAs and essential oils or placebo on the dorsal neck once weekly for 8weeks. Before and after the study, CAD extent and severity index-03 (CADESI-03) and pruritus scores were determined by veterinarians and owners, respectively. There was significantly more improvement in CADESI-03 and pruritus scores in the treatment group than in the placebo group (P=0.011 and P=0.036, respectively). Additionally, more dogs improved by at least 50% in CADESI-03 and pruritus scores in the treatment group than in the placebo group (P=0.008 and P=0.070, respectively). No adverse reactions were observed. The topical preparation containing PUFAs and essential oils was a safe treatment and beneficial in ameliorating the clinical signs of CAD.

Bias-field controlled phasing and power combination of gyromagnetic nonlinear transmission lines.

Gyromagnetic Nonlinear Transmission Lines (NLTLs) generate microwaves through the damped gyromagnetic precession of the magnetic moments in ferrimagnetic material, and are thus utilized as compact, solid-state, frequency agile, high power microwave (HPM) sources. The output frequency of a NLTL can be adjusted by control of the externally applied bias field and incident voltage pulse without physical alteration to the structure of the device. This property provides a frequency tuning capability not seen in many conventional e-beam based HPM sources. The NLTLs developed and tested are mesoband sources capable of generating MW power levels in the L, S, and C bands of the microwave spectrum. For an individual NLTL the output power at a given frequency is determined by several factors including the intrinsic properties of the ferrimagnetic material and the transmission line structure. Hence, if higher power levels are to be achieved, it is necessary to combine the outputs of multiple NLTLs. This can be accomplished in free space using antennas or in a transmission line via a power combiner. Using a bias-field controlled delay, a transient, high voltage, coaxial, three port, power combiner was designed and tested. Experimental results are compared with the results of a transient COMSOL simulation to evaluate combiner performance.

A compact 45 kV curve tracer with picoampere current measurement capability.

This paper discusses a compact high voltage curve tracer for high voltage semiconductor device characterization. The system sources up to 3 mA at up to 45 kV in dc conditions. It measures from 328 V to 60 kV with 15 V resolution and from 9.4 pA to 4 mA with 100 fA minimum resolution. Control software for the system is written in Microsoft Visual C# and features real-time measurement control and IV plotting, arc-protection and detection, an electrically isolated universal serial bus interface, and easy data exporting capabilities. The system has survived numerous catastrophic high voltage device-under-test arcing failures with no loss of measurement capability or system damage. Overall sweep times are typically under 2 min, and the curve tracer system was used to characterize the blocking performance of high voltage ceramic capacitors, high voltage silicon carbide photoconductive semiconductor switches, and high voltage coaxial cable.

All solid-state high power microwave source with high repetition frequency.

An all solid-state, megawatt-class high power microwave system featuring a silicon carbide (SiC) photoconductive semiconductor switch (PCSS) and a ferrimagnetic-based, coaxial nonlinear transmission line (NLTL) is presented. A 1.62 cm(2), 50 kV 4H-SiC PCSS is hard-switched to produce electrical pulses with 7 ns full width-half max (FWHM) pulse widths at 2 ns risetimes in single shot and burst-mode operation. The PCSS resistance drops to sub-ohm when illuminated with approximately 3 mJ of laser energy at 355 nm (tripled Nd:YAG) in a single pulse. Utilizing a fiber optic based optical delivery system, a laser pulse train of four 7 ns (FWHM) signals was generated at 65 MHz repetition frequency. The resulting electrical pulse train from the PCSS closely follows the optical input and is utilized to feed the NLTL generating microwave pulses with a base microwave-frequency of about 2.1 GHz at 65 MHz pulse repetition frequency (prf). Under typical experimental conditions, the NLTL produces sharpened output risetimes of 120 ps and microwave oscillations at 2-4 GHz that are generated due to damped gyromagnetic precession of the ferrimagnetic material's axially pre-biased magnetic moments. The complete system is discussed in detail with its output matched into 50 Ω, and results covering MHz-prf in burst-mode operation as well as frequency agility in single shot operation are discussed.

Exploding-wire experiments and theory for metal conductivity evaluation in the sub-eV regime.

Copper and silver wires are subjected to pulsed high current densities producing high density metal plasma in the sub-eV regime with atmospheric air as a background gas. Numerical simulation via application of the one-dimensional magnetohydrodynamic partial differential equations solved simultaneously with the constraining circuit equations is presented. The simulations require accurate knowledge of the material equation of state (EOS) and transport properties; the LANL sesame database is applied for the EOS in all cases. Two electrical conductivity models are applied. First, the Lee-More-Desjarlais (LMD) and its modification, the quantum LMD (QLMD) conductivity, which have been well proven at higher temperatures, are applied. Simulations with the LMD and QLMD data indicate that the conductivity data as well as the MHD methodology are accurate in the sub-eV regime of interest. A less computationally involved, empirical conductivity model is applied in the same regime to explore its temperature-density range of applicability compared to the more sophisticated model.