RESUMEN
Although in a critical position in the economy, the paper industry releases a lot of wastewater that requires adequate treatment for sustainable development. This study presents an application of Life cycle assessment (LCA) with the ReCiPe tool on the wastewater treatment plant (WWTP) of a paper factory in Vietnam to evaluate the environmental effect of the individual techniques in WWTP, especially the internal circulation (IC) reactor, a pioneer and practical anaerobic technology. Both Midpoint and Endpoint categories results demonstrated that chemical use and electricity consumption mainly contributed to the environmental impact in the WWTP. The Dissolved air flotation (DAF) and Moving bed biofilm reactor (MBBR) are classified as effective techniques to reduce the impacts on the environment. Moreover, the comparison of LCA between IC and up-flow anaerobic sludge bed (UASB) shows that IC is the better practically green technique for the environment.
Asunto(s)
Eliminación de Residuos Líquidos , Aguas Residuales , Animales , Biopelículas , Reactores Biológicos , Estadios del Ciclo de Vida , Vietnam , Eliminación de Residuos Líquidos/métodosRESUMEN
Polyhydroxyalkanoates (PHAs) are promising alternatives to non-degradable polymers in various applications. This study explored the use of biologically recovered PHA as a biofilm carrier in a moving bed biofilm reactor for acid orange 7 treatment. The PHA was comprised of 86 ± 1 mol% of 3-hydroxybutyrate and 14 ± 1 mol% of 3-hydroxyhexanoate and was melt-fused at 140 °C into pellets. The net positive surface charge of the PHA biocarrier facilitated attachment of negatively charged activated sludge, promoting biofilm formation. A 236-µm mature biofilm developed after 26 days. The high polysaccharides-to-protein ratio (>1) in the biofilm's extracellular polymeric substances indicated a stable biofilm structure. Four main microbial strains in the biofilm were identified as Leclercia adecarboxylata, Leuconostoc citreum, Bacillus cereus, and Rhodotorula mucilaginosa, all of which exhibited decolourization abilities. In conclusion, PHA holds promise as an effective biocarrier for biofilm development, offering a sustainable alternative in wastewater treatment applications.
Asunto(s)
Bencenosulfonatos , Polihidroxialcanoatos , Polihidroxialcanoatos/química , Aguas del Alcantarillado/química , Compuestos Azo , Biopelículas , Reactores BiológicosRESUMEN
Penicillium simplicissimum (isolate 10), a metal tolerant fungus, tolerated 1000 mg/L Cu and 500 mg/L Zn, but were inhibited by Cd (100 mg/L), evident by the Tolerance Index (TI) of 0.88, 0.83, and 0.08, respectively. Live cells of P. simplicissimum were more effective in removing Cr (88.6%), Pb (73.7%), Cu (63.8%), Cd (33.1%), and Zn (28.3%) than dead cells (5.3-61.7%). Microscopy approach via SEM-EDX and TEM-EDX suggested that metal removal involved biosorption and bioaccumulation, with metal precipitates detected on the cell wall, and in the cytoplasm and vacuoles. FTIR analysis revealed metals interacted with amino, carbonyl, hydroxyl, phosphoryl (except Cd) and nitro groups in the cell wall. Biosorption and bioaccumulation of metals by live cells reduced Cu and Pb toxicity, observed from good root and (4.00-4.28 cm) and shoot (8.07-8.36 cm) growth of Vigna radiata in the phytotoxicity assay.
Asunto(s)
Biodegradación Ambiental , Metales Pesados/análisis , Penicillium/efectos de los fármacos , Adsorción , Biomasa , Cadmio/análisis , Metales , Microscopía Electrónica , Microscopía Electrónica de Rastreo , Microscopía Electrónica de Transmisión , Contaminantes del Suelo/análisis , Espectroscopía Infrarroja por Transformada de Fourier , Análisis Espectral , Aguas Residuales , Contaminantes Químicos del Agua/análisis , Purificación del Agua/métodosRESUMEN
The effects of dry biomass density in cryogel beads, shaking speed and initial concentration ratio of phenol to 4-chlorophenol (4-CP) on the bioregeneration efficiencies of binary phenol and 4-CP-loaded granular activated carbon (GAC) for phenol and 4-CP, respectively, were investigated under the simultaneous adsorption and biodegradation approach. The results revealed higher bioregeneration efficiencies of binary-loaded GAC for phenol and 4-CP at higher dry biomass density but moderate shaking speed. The optimum dry biomass density in cryogel beads and shaking speed for use in bioregeneration were found to be 0.01 g/mL and 250 rpm, respectively. With respect to the initial phenol to 4-CP concentration ratio, the bioregeneration efficiencies were lower under increasing phenol and 4-CP initial concentrations, respectively, with the effect being more conspicuous under increasing 4-CP concentration. Higher bioregeneration efficiencies were achieved with the use of immobilized rather than suspended biomasses.
Asunto(s)
Biodegradación Ambiental , Carbón Orgánico , Clorofenoles/química , Criogeles , Fenol/química , Adsorción , BiomasaRESUMEN
Four fungal isolates: Simplicillium chinense (iso 9, accession no. KX425621), Penicillium simplicissimum (iso 10, KP713758), Trichoderma asperellum (iso 11, KP792512), and Coriolopsis sp. (1c3, KM403574) were subjected to a series of induced-tolerance training under high metal concentrations to determine if greater tolerance could be achieved from constant exposure to such conditions. Adaptive tolerance assay (Tolerance Index, TI) and Field-Emission Scanning Electron Microscopy with Energy Dispersive X-ray (SEM-EDX) characterized their metal tolerance. "Untrained" S. chinense, P. simplicissimum and T. asperellum showed tolerance towards 4000-4500ppm Al(III) (TI: 0.64-0.71), 1000ppm Cr(III) (0.52-0.83) and Pb(II) (0.32-0.88). With tolerance training, tolerance towards 2000-6000ppm Al(III), 500-3000ppm Pb(II) and 2000-3000ppm Cr(III) were achieved (TI: 0.01-0.82) compared to untrained cultures (0.00-0.59). In contrast, tolerance training for Coriolopsis sp. and P. simplicissimum was less successful, with TI values similar or lower than untrained cultures. SEM-EDX analysis proposed biosorption and bioaccumulation as mechanisms for metal removal. The latter was demonstrated with the removal of Cr(III) and Pb(II) by S. chinense (12.37 and 11.52mgg-1, respectively) and T. asperellum (10.44 and 7.50mgg-1). Induced-tolerance training may render benefit in the long run, but this delicate approach is suggestively species and metal dependent.
Asunto(s)
Adaptación Fisiológica/efectos de los fármacos , Farmacorresistencia Fúngica , Hypocreales/efectos de los fármacos , Metales/toxicidad , Penicillium/efectos de los fármacos , Polyporaceae/efectos de los fármacos , Trichoderma/efectos de los fármacos , Contaminantes Químicos del Agua/toxicidad , Hypocreales/fisiología , Hypocreales/ultraestructura , Metales/aislamiento & purificación , Microscopía Electrónica de Rastreo , Penicillium/fisiología , Penicillium/ultraestructura , Polyporaceae/fisiología , Polyporaceae/ultraestructura , Trichoderma/fisiología , Trichoderma/ultraestructura , Contaminantes Químicos del Agua/aislamiento & purificación , Contaminantes Químicos del Agua/metabolismoRESUMEN
The performance of moving bed sequencing batch reactors (MBSBRs) added with 8 % (v/v) of polyurethane (PU) foam cubes as carrier media in nitrogen removal was investigated in treating low COD/N wastewater. The results indicate that MBSBR with 8-mL cubes achieved the highest total nitrogen (TN) removal efficiency of 37% during the aeration period, followed by 31%, 24% and 19 % for MBSBRs with 27-, 64- and 125-mL cubes, respectively. The increased TN removal in MBSBRs was mainly due to simultaneous nitrification and denitrification (SND) process which was verified by batch studies. The relatively lower TN removal in MBSBR with larger PU foam cubes was attributed to the observation that larger PU foam cubes were not fully attached by biomass. Higher concentrations of 8-mL PU foam cubes in batch reactors yielded higher TN removal.