RESUMEN
A novel high-pressure phase of manganese mononitride, NiAs-type MnN, was successfully synthesized through a pressure-induced phase transition from a tetragonal distorted NaCl-type MnN at pressures above approximately 55 GPa. High-pressure experiments, including starting material preparation, were conducted using a laser-heated diamond anvil cell. This result is the first example of a nitride with a structural phase transition from the distorted NaCl-type to the NiAs-type structure. Upon decompression after the phase transition to NiAs-type structure, the NiAs-type MnN underwent a structural change to the distorted NaCl-type phase, indicating the phase transition was reversible. NiAs-type MnN has a higher density and bulk modulus in comparison to the distorted NaCl-type one. The phase transition pressure of MnN is lower than that of oxides, such as FeO and MnO, which show a structural phase transition from a NaCl-type to a NiAs-type structure. It is suggested that this is due to the lattice distortion caused by antiferromagnetic ordering.
RESUMEN
Tungsten nitride continues to drive fundamental interests because of its potential as a functional compound, which combines features such as high hardness together with thermal, chemical, and wear resistance. Here, we report a novel tungsten nitride phase synthesized from MoC-type WN0.6 and molecular nitrogen after laser irradiation at P = 70 GPa in a diamond anvil cell. This novel phase is quenchable at ambient pressure and determined to be U7Te12-type tungsten nitride and crystallizes in the hexagonal space group (P6) having lattice parameters of a = 8.2398(3) Å, c = 2.94948(14) Å, and V = 173.423(13) Å3. Tungsten atoms are coordinated to eight and nine nitrogen atoms, higher than previously reported tungsten nitrides. The bulk modulus is determined to be K0 = 312 (5) GPa (K0' = 4.0 fixed), and DFT calculations predict that U7Te12-type W7N12 has a metallic nature.
RESUMEN
A Nowotny chimney-ladder (NCL) chromium germanide (CrGeγ) with varying compositions has been synthesized under high pressure. Crystal structure parameters of the NCL CrGeγ have been calculated by Le Bail refinement based on the superspace group. The refined γ of CrGeγ increases with the synthesis pressure, indicating an increasing Ge content. The NCL CrGeγ phases are ferromagnetic at T = 2 K regardless of their composition, and the magnetic transition temperature (TC) increases when the γ becomes higher. It is noteworthy that CrGe1.763 and CrGe1.774 synthesized at P = 10 and 14 GPa have magnetic transition temperatures of T = 295 and 333 K above room temperature, respectively. Surprisingly, the magnetic transition temperature has changed by ΔTC = 270 K, although the γ values of the raw material and the sample synthesized at P = 14 GPa differ by only Δγ = 0.05, corresponding to an atomic concentration of 0.62 atom %. The synthesis pressure acts as an essential parameter in tuning the composition of the NCL phase. Accordingly, the high-pressure synthesis may significantly control several physical characteristics of NCL phases by utilizing compositional and structural modulation.
RESUMEN
Chromium germanides, namely, Nowotny chimney-ladder-phase CrGe1.77 and MoSi2-type CrGe2, were synthesized above 15 GPa or more via laser heating using a diamond anvil cell (LHDAC). MoSi2-type CrGe2, which is the most Ge-rich compound in the Cr-Ge system, crystallizes in the tetragonal structure with a space group of I4/mmm (no. 139) and lattice parameters of a = 3.24919(6) Å and c = 8.0523(3) Å and is isostructural with MoSi2. MoSi2-type CrGe2 has a deep pseudogap caused by the splitting of 3d orbitals with Cr, as evidenced by ab initio calculation. In this article, we have succeeded in synthesizing a binary compound between transition-metal and metalloid elements for the first time at high pressures above 10 GPa using the LHDAC. This pathway opens the possibility to explore more compounds in this system and may provide new insights into the fundamental interaction between these two elements.
RESUMEN
Within the exploration of sustainable and functional materials, narrow bandgap magnesium silicide semiconductors have gained growing interest. Intriguingly, squeezing silicides to extreme pressures and exposing them to non-ambient temperatures proves fruitful to study the structural behavior, tune the electronic structure, or discover novel phases. Herein, structural changes and thermoelastic characteristics of magnesium silicides were probed with synchrotron x-ray diffraction techniques using the laser-heated diamond anvil cell and large volume press at high pressure and temperature and temperature-dependent synchrotron powder diffraction. Probing the ambient phase of Mg2Si (anti-CaF2-type Mg2Si, space group: Fm3¯m) at static pressures of giga-Pascals possibly unveiled the transformation to metastable orthorhombic anti-PbCl2-type Mg2Si (Pnma). Interestingly, heating under pressures introduced the decomposition of Mg2Si to hexagonal Mg9Si5 (P63) and minor Mg. Using equations of state (EoS), which relate pressure to volume, the bulk moduli of anti-CaF2-type Mg2Si, anti-PbCl2-type Mg2Si, and Mg9Si5 were determined to be B0 = 47(2) GPa, B0 ≈ 72(5) GPa, and B0 = 58(3) GPa, respectively. Employing a high-temperature EoS to the P-V-T data of anti-CaF2-type Mg2Si provided its thermoelastic parameters: BT0 = 46(3) GPa, B'T0 = 6.1(8), and (∂BT0/∂T)P = -0.013(4) GPa K-1. At atmospheric pressure, anti-CaF2-type Mg2Si kept stable at T = 133-723 K, whereas Mg9Si5 transformed to anti-CaF2-type Mg2Si and Si above T ≥ 530 K. This temperature stability may indicate the potential of Mg9Si5 as a mid-temperature thermoelectric material, as suggested from previous first-principles calculations. Within this realm, thermal models were applied, yielding thermal expansion coefficients of both silicides together with estimations of their Grüneisen parameter and Debye temperature.
RESUMEN
A novel niobium nitride, U2S3-type Nb2N3, has been successfully synthesized by nitridation of δ-NbN above approximately 30 GPa in a laser-heated diamond anvil cell. Nb2N3 crystallizes in the same orthorhombic structure (space group: Pnma) as η-Ta2N3. Nb2N3 consists of regular-shaped polyhedra, and the bulk modulus has been determined to K0 = 300(2) GPa. The low-temperature X-ray diffraction measurements have been successfully conducted for the tiny novel Nb2N3 between 297.7(5) and 106.3(3) K under ambient pressure. Nb2N3 shows no structural phase transition down to 106.3(3) K, and investigation of the linear thermal expansion coefficients yields αa = 3.36(9) × 10-6 K-1, αb = 5.39(10) × 10-6 K-1, αc = 6.77(15) × 10-6 K-1, respectively. Our study reveals that the incompressible novel nitride shows low thermal expansion behavior, which offers new insights for the development of functional nitrides and their crystal chemistry.
RESUMEN
A novel tungsten nitride, MoC-type WN, was synthesized at 6 GPa and 1200 °C via nitridation of tungsten by ammonium chloride as a nitrogen source. This compound is isostructural with γ'-MoC, which has a hexagonal structure with a space group of P63/mmc (No. 194). Micrometer-sized single crystals of MoC-type WN were grown in molten ammonium chloride flux. In addition, NaCl-type WN and WC-type WN were synthesized via nitridation by ammonium chloride at 6 GPa and 1000 °C. Ammonium chloride is appropriate as a nitrogen source for nitride synthesis under high pressure. The new WN phase crystallizes in the hexagonal structure with unit cell parameters of a = 2.89248(2) Å and c = 10.17069(7) Å. The chemical formula of MoC-type WN refined by the Rietveld analysis from powder X-ray diffraction data was WN0.60(1). The zero-pressure bulk modulus, K0, of MoC-type WN was determined to be 338(3) GPa, which can be expected to be a hard material.
RESUMEN
A new structural polymorph of Li3BP2O8 has been successfully synthesized via a solid-state reaction between Li3PO4 and BPO4 at 4 GPa and 600 °C. The high-pressure phase of Li3BP2O8 (HP-Li3BP2O8) was found to crystallize in monoclinic symmetry with the cell parameters of a = 8.57010(4) Å, b = 11.11812(5) Å, c = 5.55380(3) Å, and ß = 97.7269(3)° [space group P21/ a (No. 14)]. HP-Li3BP2O8 has a new crystal structure that has not been reported so far. The total ionic conductivities measured for the polycrystalline sample by alternating-currrent impedance were 3.4 × 10-7 and 2.1 × 10-6 S/cm at 399 and 456 K, respectively. The lithium ionic conductivity of HP-Li3BP2O8 was higher than that of the low-pressure phase Li3BP2O8 in the temperature range of 375-456 K. This is caused by the difference in the dimensions of the lithium arrangements between LP- and HP-Li3BP2O8.
RESUMEN
Highly coordinated iron and cobalt nitrides were successfully synthesized via direct chemical reaction between a transition metal and molecular nitrogen at pressures above approximately 30 GPa using a laser-heated diamond anvil cell. The synthesized novel transition metal nitrides were found to crystallize into the NiAs-type or marcasite-type structure. NiAs-type FeN could be quenched at ambient pressure, although it was gradually converted to the ZnS-type structure after the pressure was released. On the other hand, CoN was recovered with ZnS-type structure through a phase transition from NiAs-type structure at approximately a few gigapascals during decompression. Marcasite-type CoN2 was also synthesized at pressures above approximately 30 GPa. High-pressure in situ X-ray diffraction measurement showed that the zero-pressure bulk modulus of marcasite-type CoN2 is 216(18) GPa, which is comparable to that of RhN2. This indicates that the interatomic distance of the N-N dimer in marcasite-type CoN2 is short because of weak orbital interaction between cobalt and nitrogen atoms, as in RhN2. Surprisingly, a first-principles electronic band calculation suggests that the NiAs-type FeN and CoN and marcasite-type CoN2 exhibit metallic characteristics with magnetic moments of 3.4, 0.6, and 1.2 µB, respectively. The ferromagnetic NiAs-type structure originates from the anisotropic arrangement of transition atoms stacked along the c axis.
RESUMEN
The last remaining marcasite-type RuN2 was successfully synthesized by direct chemical reaction between ruthenium and molecular nitrogen above the pressure of 32â GPa. For the first time, we found that Ru 4d is weakly hybridized with N 2p in the structure by using transmission electron microscopy equipped with electron-energy-loss spectroscopy. Our finding give important knowledge about the platinum-group pernitride with respect to the chemical bonding between platinum-group element and nitrogen.
RESUMEN
Marcasite-type rhodium nitride was successfully synthesized in a direct chemical reaction between a rhodium metal and molecular nitrogen at 43.2 GPa using a laser-heated diamond-anvil cell. This material shows a low zero-pressure bulk modulus of K0 = 235(13) GPa, which is much lower than those of other platinum group nitrides. This finding is due to the weaker bonding interaction between metal atoms and quasi-molecular dinitrogen units in the marcasite-type structure, as proposed by theoretical studies.
RESUMEN
This study reports the synthesis and crystal structure determination of a novel CrTe3 phase using various experimental and theoretical methods. The average stoichiometry and local phase separation of this quenched high-pressure phase were characterized by ex situ synchrotron powder X-ray diffraction and total scattering. Several structural models were obtained using simulated annealing, but all suffered from an imperfect Rietveld refinement, especially at higher diffraction angles. Finally, a novel stoichiometrically correct crystal structure model was proposed on the basis of electron diffraction data and refined against powder diffraction data using the Rietveld method. Scanning electron microscopy-energy-dispersive X-ray spectrometry (EDX) measurements verified the targeted 1:3 (Cr:Te) average stoichiometry for the starting compound and for the quenched high-pressure phase within experimental errors. Scanning transmission electron microscopy (STEM)-EDX was used to examine minute variations of the Cr-to-Te ratio at the nanoscale. Precession electron diffraction (PED) experiments were applied for the nanoscale structure analysis of the quenched high-pressure phase. The proposed monoclinic model from PED experiments provided an improved fit to the X-ray patterns, especially after introducing atomic anisotropic displacement parameters and partial occupancy of Cr atoms. Atomic resolution STEM and simulations were conducted to identify variations in the Cr-atom site-occupancy factor. No significant variations were observed experimentally for several zone axes. The magnetic properties of the novel CrTe3 phase were investigated through temperature- and field-dependent magnetization measurements. In order to understand these properties, auxiliary theoretical investigations have been performed by first-principles electronic structure calculations and Monte Carlo simulations. The obtained results allow the observed magnetization behavior to be interpreted as the consequence of competition between the applied magnetic field and the Cr-Cr exchange interactions, leading to a decrease of the magnetization towards T = 0â K typical for antiferromagnetic systems, as well as a field-induced enhanced magnetization around the critical temperature due to the high magnetic susceptibility in this region.
RESUMEN
A novel high-pressure molybdenum nitride phase, Mo3N5, was synthesized at above 45 GPa via a nitridation reaction of molybdenum with nitrogen under high pressure using a laser-heated diamond anvil cell. Mo3N5, having an N-N dimer and 7-coordinated Mo sites, crystallizes in an orthorhombic structure with a space group of Cmcm (No. 63) without other prototype structures. The refined lattice parameters for Mo3N5 were a = 2.86201(2) Å, b = 7.07401(6) Å, and c = 14.59687(13) Å. The DFT enthalpy calculation suggested that Mo3N5 is a high-pressure stable phase, which is also consistent with an increasing coordination number compared to ambient- and low-pressure phases. The zero-pressure bulk modulus of Mo3N5 was determined to be K0 = 328(4) GPa with K'0 = 10.1(6) by the fitting for the compression curve, which is almost consistent with the theoretical E-V curve and elastic stiffness constants. The compressibility of Mo3N5 has axial anisotropy corresponding to the N-N dimer direction in the crystal structure.
RESUMEN
Hydrostatic pressure induces structural changes in proteins, including denaturation, the mechanism of which has been attributed to water penetration into the protein interior. In this study, structures of 3-isopropylmalate dehydrogenase (IPMDH) from Shewanella oneidensis MR-1 were determined at about 2â Å resolution under pressures ranging from 0.1 to 650â MPa using a diamond anvil cell (DAC). Although most of the protein cavities are monotonically compressed as the pressure increases, the volume of one particular cavity at the dimer interface increases at pressures over 340â MPa. In parallel with this volume increase, water penetration into the cavity could be observed at pressures over 410â MPa. In addition, the generation of a new cleft on the molecular surface accompanied by water penetration could also be observed at pressures over 580â MPa. These water-penetration phenomena are considered to be initial steps in the pressure-denaturation process of IPMDH.
Asunto(s)
3-Isopropilmalato Deshidrogenasa/química , Presión Hidrostática , Shewanella/enzimología , Cristalografía por Rayos X , Estabilidad de Enzimas , Desnaturalización Proteica , Relación Estructura-ActividadRESUMEN
A novel transition metal pernitride, CuAl2-type VN2, has been synthesized at a pressure above 73.3 GPa. The bulk modulus has been determined to be K0 = 347(12) GPa. By hard X-ray absorption spectrum measurements of VN2, the valence state of transition metal ions in pernitrides has been for the first time experimentally reported.
RESUMEN
The binary skutterudite CoP(3) has a large void at the body-centered site of each cubic unit cell and is, therefore, called a nonfilled skutterudite. We investigated its room-temperature compression behavior up to 40.4 GPa in helium and argon using a diamond-anvil cell. High-pressure in situ X-ray diffraction and Raman scattering measurements found no phase transition and a stable cubic structure up to the maximum pressure in both media. A fitting of the present pressure-volume data to the third-order Birch-Murnaghan equation of state yields a zero-pressure bulk modulus K(0) of 147(3) GPa [pressure derivative K(0)' of 4.4(2)] and 171(5) GPa [where K(0)' = 4.2(4)] in helium and argon, respectively. The Grüneisen parameter was determined to be 1.4 from the Raman scattering measurements. Thus, CoP(3) is stiffer than other binary skutterudites and could therefore be used as a host cage to accommodate large atoms under high pressure without structural collapse.
RESUMEN
The rock salt (B1) structure of binary oxides or chalcogenides transforms to the CsCl (B2) structure under high pressure, with critical pressures P(s) depending on the cation to anion size ratio (R(c)/R(a)). We investigated structural changes of A(2)MO(3) (A = Sr, Ca; M = Cu, Pd) comprising alternate 7-fold B1 AO blocks and corner-shared MO(2) square-planar chains under pressure. All of the examined compounds exhibit a structural transition at P(s) = 29-41 GPa involving a change in the A-site geometry to an 8-fold B2 coordination. This observation demonstrates, together with the high pressure study on the structurally related Sr(3)Fe(2)O(5), that the B1-to-B2 transition generally occurs in these intergrowth structures. An empirical relation of P(s) and the R(c)/R(a) ratio for the binary system holds well for the intergrowth structure also, which means that P(s) is predominantly determined by the rock salt blocks. However, a large deviation from the relation is found in LaSrNiO(3.4), where oxygen atoms partially occupy the apical site of the MO(4) square plane. We predict furthermore the occurrence of the same structural transition for Ruddlesden-Popper-type layered perovskite oxides (AO)(AMO(3))(n), under higher pressures. For investigating the effect on the physical properties, an electrical resistivity of Sr(2)CuO(3) is studied.
Asunto(s)
Óxidos/química , Sales (Química)/química , Calcio/química , Cesio/química , Cloruros/química , Cobre/química , Cristalografía por Rayos X , Modelos Moleculares , Paladio/química , Presión , Estroncio/químicaRESUMEN
We are currently developing a small perforated titanium subperiosteal implant specifically for orthodontic therapy, which can be placed anywhere on the bone surface. In the present study, we coated this implant with hydroxyapatite (HA) or alpha-tricalcium phosphate (alpha-TCP) in an attempt to shorten the initial stabilization period relative to the few months that is usually required. The coated implants were placed beneath the periosteum in rabbit femora. The implants were observed by radiographically and histologically, and measured the tensile strength of the bone-implant interface. Two weeks after placement, the volume of new bone formed in the perforations of the implant was significantly greater for the alpha-TCP-coated implants than for the HA-coated implants. Our findings indicate that new bone is formed faster in the surrounding area with alpha-TCP- and HA-coated subperiosteal implants than with uncoated implants, and that alpha-TCP is a particularly effective stimulator of new bone formation.