Molecular Self-Assembly and Adsorption Structure of 2,2'-Dipyrimidyl Disulfides on Au(111) Surfaces.

The effects of solution concentration and pH on the formation and surface structure of 2-pyrimidinethiolate (2PymS) self-assembled monolayers (SAMs) on Au(111) via the adsorption of 2,2'-dipyrimidyl disulfide (DPymDS) were examined using scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS). STM observations revealed that the formation and structural order of 2PymS SAMs were markedly influenced by the solution concentration and pH. 2PymS SAMs formed in a 0.01 mM ethanol solution were mainly composed of a more uniform and ordered phase compared with those formed in 0.001 mM or 1 mM solutions. SAMs formed in a 0.01 mM solution at pH 2 were composed of a fully disordered phase with many irregular and bright aggregates, whereas SAMs formed at pH 7 had small ordered domains and many bright islands. As the solution pH increased from pH 7 to pH 12, the surface morphology of 2PymS SAMs remarkably changed from small ordered domains to large ordered domains, which can be described as a (4√2 × 3)R51° packing structure. XPS measurements clearly showed that the adsorption of DPymDS on Au(111) resulted in the formation of 2PymS (thiolate) SAMs via the cleavage of the disulfide (S-S) bond in DPymDS, and most N atoms in the pyrimidine rings existed in the deprotonated form. The results herein will provide a new insight into the molecular self-assembly behaviors and adsorption structures of DPymDS molecules on Au(111) depending on solution concentration and pH.

Formation and Thermal Stability of Ordered Self-Assembled Monolayers by the Adsorption of Amide-Containing Alkanethiols on Au(111).

We examined the surface structure, binding conditions, electrochemical behavior, and thermal stability of self-assembled monolayers (SAMs) on Au(111) formed by N-(2-mercaptoethyl)heptanamide (MEHA) containing an amide group in an inner alkyl chain using scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and cyclic voltammetry (CV) to understand the effects of an internal amide group as a function of deposition time. The STM study clearly showed that the structural transitions of MEHA SAMs on Au(111) occurred from the liquid phase to the formation of a closely packed and well-ordered ß-phase via a loosely packed α-phase as an intermediate phase, depending on the deposition time. XPS measurements showed that the relative peak intensities of chemisorbed sulfur against Au 4f for MEHA SAMs formed after deposition for 1 min, 10 min, and 1 h were calculated to be 0.0022, 0.0068, and 0.0070, respectively. Based on the STM and XPS results, it is expected that the formation of a well-ordered ß-phase is due to an increased adsorption of chemisorbed sulfur and the structural rearrangement of molecular backbones to maximize lateral interactions resulting from a longer deposition period of 1 h. CV measurements showed a significant difference in the electrochemical behavior of MEHA and decanethiol (DT) SAMs as a result of the presence of an internal amide group in the MEHA SAMs. Herein, we report the first high-resolution STM image of well-ordered MEHA SAMs on Au(111) with a (3 × 2√3) superlattice (ß-phase). We also found that amide-containing MEHA SAMs were thermally much more stable than DT SAMs due to the formation of internal hydrogen networks in MEHA SAMs. Our molecular-scale STM results provide new insight into the growth process, surface structure, and thermal stability of amide-containing alkanethiols on Au(111).

Solvent- and Light-Sensitive AIEE-Active Azo Dye: From Spherical to 1D and 2D Assemblies.

Fluorescent molecular assembly systems provide an exciting platform for creating stimuli-responsive nano- and microstructured materials with optical, electronic, and sensing functions. To understand the relationship between (i) the plausible molecular structures preferentially adopted depending on the solvent polarity (such as N,N-dimethylformamide [DMF], tetrahydrofuran [THF], and toluene), (ii) the resulting spectroscopic features, and (iii) self-assembled nano-, micro-, and macrostructures, we chose a sterically crowded triangular azo dye (3Bu) composed of a polar molecular core and three peripheral biphenyl wings. The chromophore changed the solution color from yellow to pink-red depending on the solvent polarity. In a yellow DMF solution, a considerable amount of the twisted azo form could be kept stable with the help of favorable intermolecular interactions with the solvent molecules. By varying the concentration of the DMF solution, the morphology of self-assembled structures was transformed from nanoparticles to micrometer-sized one-dimensional (1D) structures such as sticks and fibers. In a pink-red toluene solution, the periphery of the central ring became more planar. The resulting significant amount of the keto-hydrazone tautomer grew into micro- and millimeter-sized 1D structures. Interestingly, when THF-H2O (1:1) mixtures were stored at a low temperature, elongated fibers were stacked sideways and eventually developed into anisotropic two-dimensional (2D) sheets. Notably, subsequent exposure of visible-light-irradiated sphere samples to solvent vapor resulted in reversible fluorescence off↔on switching accompanied by morphological restoration. These findings suggest that rational selection of organic dyes, solvents, and light is important for developing reusable fluorescent materials.

Thermally Driven Structural Order of Oligo(Ethylene Glycol)-Terminated Alkanethiol Monolayers on Au(111) Prepared by Vapor Deposition.

To probe the effects of deposition temperature on the formation and structural order of self-assembled monolayers (SAMs) on Au(111) prepared by vapor deposition of 2-(2-methoxyethoxy)ethanethiol (CH3O(CH2)2O(CH2)2SH, EG2) for 24 h, we examined the surface structure and electrochemical behavior of the resulting EG2 SAMs using scanning tunneling microscopy (STM) and cyclic voltammetry (CV). STM observations clearly revealed that EG2 SAMs vapor-deposited on Au(111) at 298 K were composed of a disordered phase on the entire Au surface, whereas those formed at 323 K showed improved structural order, showing a mixed phase of ordered and disordered phases. Moreover, at 348 K, uniform and highly ordered EG2 SAMs on Au(111) were formed with a (2 × 3√3) packing structure. CV measurements showed sharp reductive desorption (RD) peaks at -0.818, -0.861, and -0.880 V for EG2 SAM-modified Au electrodes formed at 298, 323, and 348 K, respectively. More negative potential shifts of RD peaks with increasing deposition temperature are attributed to an increase in van der Waals interactions between EG2 molecular backbones resulting from the improved structural quality of EG2 SAMs. Our results obtained herein provide new insights into the formation and thermally driven structural order of oligo(ethylene glycol)-terminated SAMs vapor-deposited on Au(111).

Stimulus-Responsive Tubular Conjugated Polymer 2D Nanosheets.

Creation of new two-dimensional (2D) architectures has attracted significant attention in the field of self-assembly for structural diversity and new functionalization. Although numerous 2D polymer nanosheets have been reported, 2D nanosheets with tubular channels have been unexplored. Herein, we describe a new strategy for the fabrication of stimulus-responsive conjugated polymer 2D nanosheets with hollow cavities. Amphiphilic macrocyclic diacetylenes self-assembled in an aqueous solution in a columnar manner to afford bilayered 2D nanosheets with intrinsically tubular nanochannels. UV-induced polymerization resulted in the generation of blue-colored tubular conjugated polydiacetylene 2D nanosheets. Immobilization of gold nanoparticles, fluorescence labeling with FRET phenomenon and colorimetric DNA sensing were demonstrated with these new 2D nanosheets. In addition, the free NH2 containing polymerized 2D nanosheet was utilized for conductivity behavior and grafting on graphene oxide (GO).

Displacement Processes of 1-Adamanetanethiol Self-Assembled Monolayers on Au(111) by 1-Hexanethiol.

Displacement processes of pre-adsorbed 1-admanetanethiol (ADT) self-assembled monolayers (SAMs) on Au(111) by 1-hexanethiol (HT) at room temperature were investigated by scanning tunneling microscopy (STM) and cyclic voltammetry (CV). Molecular-scale STM imaging clearly revealed that phase transitions from the (7 × 7) phase for ADT SAMs to the c(4 × 2) phase for HT SAMs via intermediate phase including bright aggregated islands and disordered phase. Moreover, it was found that ADT SAMs were completely displaced by HT molecules with a short hexyl chain within an hour. The CV measurements showed that cathodic peaks for SAM-modified Au(111) electrodes as a function of displacement time were varied with the structural change of displaced SAMs. Our results provide new insight into understanding the displacement processes of ADT SAMs on Au(111) by HT.

Solvent Effect on the Formation of Octaneselenocyanate Self-Assembled Monolayers on Au(111).

Solvent effect on the formation and electrochemical behavior of octaneselenolate (C8Se) self-assembled monolayers (SAMs) on Au(111) derived from the adsorption of octaneselenocyanate (C8Se-CN) molecules in various solvents at 363 K for 1 h was examined by scanning tunneling microscopy (STM) and cyclic voltammetry (CV). STM imaging clearly revealed that the formation and structure of C8Se SAMs were markedly influenced by the polarity of solvent. C8Se SAMs formed in octane were composed of liquid-like disordered phase. In contrast, C8Se SAMs formed in DMF had ordered domains but not a uniform surface, whereas C8Se SAMs formed in ethanol had uniform surface and highly ordered domains with a (2 × 2 √13) structure. It was found that the structural quality of C8Se SAMs increased with increasing solvent polarity in the order of ethanol > DMF > octane. CV measurements also showed that blocking efficiency of C8Se SAMs for electrode reaction increased with increasing the structural quality of SAMs.

Well-Ordered Domains of 4-Fluorobenzenethiol Self-Assembled Monolayers on Au(111) Guided by a Displacement Reaction.

Displacement processes of pre-covered cyclohexanethiol (CHT) self-assembled monolayers (SAMs) by 4-fluorobenzenethiol (4-FBT) on Au(111) were examined as a function of displacement time by scanning tunneling microscopy (STM) and water static contact angle (CA) measurements. STM imaging revealed that the adsorption of 4-FBT on Au(111) in a 1 mM ethanol solution at room temperature for 24 h generated disordered SAMs, whereas well-ordered 4-FBT SAMs with a (4√6 × âˆš3)R5° packing structure were formed over the entire Au(111) surfaces via the displacement of pre-covered CHT SAMs by 4-FBT molecules. The CA measurements also showed that CA values increase with increasing displacement time, reflecting that the displacement reaction took place and the resulting SAMs had greater hydrophobicity compared with CHT SAMs. In this study, we found that the displacement technique using CHT SAMs as a molecular template is very useful in obtaining 4-FBT SAMs with a high degree of structural order and large ordered domains.

Formation of Ordered 4-Fluorobenzenethiol Self-Assembled Monolayers on Au(111) from Vapor Phase Deposition.

Self-assembled monolayers (SAMs) were formed by the spontaneous adsorption of 4-fluorobenzenethiol (4-FBT) on Au(111) using both solution and ambient-pressure vapor deposition methods at room temperature. The surface structure and thermal desorption properties of 4-FBT SAMs were examined by scanning tunneling microscopy (STM) and thermal desorption spectroscopy (TDS). STM imaging showed that 4-FBT SAMs formed in solution at room temperature mainly contained disordered phase with gold adatom islands, while those formed by ambient-pressure vapor deposition had well-ordered phase, which can be described as a (2 x 2√13)R45 degrees structure. In addition, thermal desorption spectroscopy (TDS) measurements showed that strong desorption peak for parent mass fragment (m/z = 128, FC6H5SH+) for 4-FBT SAMs on Au(111) was observed at 460 K, as a result of hydrogen abstract reaction of chemisorbed thiolates during desorption.

Effect of Solution Concentration on the Formation of Ordered Domains in Pentachlorobenzenethiol Self-Assembled Monolayers on Au(111).

The surface structures of self-assembled monolayers (SAMs) formed by the adsorption of pentachlorobenzenethiol (PCBT) molecules on Au(111) as a function of solution concentration were examined by means of scanning tunneling microscopy (STM) to understand the effect of concentration on the formation of ordered domains. STM imaging revealed that PCBT SAMs formed in a 0.01 or 1 mM ethanol solution at room temperature for 20 min contained small ordered domains in the range of several to 20 nm2 and disordered phases, while PCBT SAMs formed in a 0.1 mM ethanol solution were composed of long-range ordered domains in the range of 20 to 50 nm2, which can be assigned as a (4 x √3)R45 degrees packing structure. Interestingly, the bright aggregated domains stacked by π-π interactions between PCBT rings were usually observed around boundary regions of ordered domains. In addition, X-ray photoelectron spectroscopy measurements revealed that ordered PCBT SAMs on Au(111) were formed via the chemical interactions between the sulfur atom of PCBT and gold surface. Our results obtained here will be very useful in understanding the formation and structure of PCBT SAMs on gold surfaces.

Striped Phase of 3-Hexylthiophene Self-Assembled Monolayers on Au(1 11) Formed by Vapor Phase Deposition.

The formation and surface structure of 3-hexylthiophene (HTP) self-assembled monolayers (SAMs) on Au(111) prepared by solution and ambient-pressure vapor deposition at room temperature (RT) for 24 h were examined by means of scanning tunneling microscopy (STM) and cyclic voltammetry (CV). STM imaging revealed that HTP SAMs formed by solution deposition have a disordered phase, whereas those formed by vapor deposition exhibit a striped phase with a unidirectional orientation. The distance between the rows in the striped phase was measured to be 1.3 ± 0.1 nm, and the hexyl molecular backbones of HTP in the SAMs on Au(111) are oriented parallel to the Au(111) surface with the head-to-head orientation. From this STM observation, we suggest that the formation of this striped phase in HTP SAMs prepared by vapor deposition were mainly driven by the optimization of van der Waals interactions between the hexyl chains on the surface. CV measurements also demonstrated that HTP SAMs show a high blocking efficiency for electron transfer reactions between electrolytes and the gold electrode, suggesting the formation of SAMs on Au(111) from the vapor phase. Our results obtained here will be very useful for understanding the formation and structure of HTP SAMs on Au(111) surfaces and how they are influenced by deposition method.

Formation and structure of ordered pentachlorobenzenethiol self-assembled monolayers on Au(111) studied by scanning tunneling microscopy.

Molecular-scale surface structures of self-assembled monolayers (SAMs) prepared by the adsorption of pentafluorobenzenethiols (PFBT) and pentachlorobenzenethiols (PCBT) on Au(111) were investigated by scanning tunneling microscopy (STM). High-resolution STM imaging revealed that PFBT SAMs on Au(111) have long-range ordered domains with a row structure at room temperature, whereas PCBT SAMs have small ordered domains, with disordered domains as the main phase. This may reflect the larger diffusion barriers of PCBT molecules on Au(111) surfaces compared to PFBT molecules during SAM formation. The structural transitions of PCBT SAMs from the mixed phase containing disordered and ordered domains to the uniform ordered domains were observed at 50 degrees C depending on immersion time. The ordered packing structure of PCBT SAMs is an incommensurate (square root of 3 x square root of 10)R45 degrees structure, which differs from that of PFBT SAMs with a (2 x 5 square root of 13)R30 degrees structure. We found that a small modification in the chemical structures of aromatic rings using a halo-substituent strongly affects the self-assembly mechanism and packing structure of aromatic thiol SAMs on Au(111). Moreover, we demonstrated that highly ordered PCBT SAMs can be obtained at a solution temperature of 50 degrees C after immersion for 60 min.

Growth, solvent effects, and thermal desorption behavior of octylthiocyanate self-assembled monolayers on Au(111).

The growth process, solvent effects, and thermal desorption behavior of octylthiocyanate [OTC, CH(3)(CH(2))(7)S-CN] self-assembled monolayers (SAMs) on Au(111) were characterized by scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and thermal desorption spectroscopy (TDS). To investigate their growth processes, octanethiol [OT, CH(3)(CH(2))(7)S-H] and OTC SAMs were prepared in 0.5 µM ethanol solution at room temperature as a function of immersion time: 10 min, 1 h, 2 h, and 24 h. STM imaging revealed that OT SAMs underwent a phase transition from the liquid phase containing striped-phase domains to the closely packed c(4 × 2) phase. OTC SAMs underwent a different phase transition from the liquid phase containing aggregated molecules to the disordered phase containing striped-phase domains. The adsorption amounts of OTC SAMs formed after immersion for 10 min and 24 h were measured to be 16% and 30% smaller than those of OT SAMs under the same conditions. STM and XPS results show that the growth kinetics of OTC SAMs on Au(111) are much slower than those of OT SAMs. Hexane resulted in OTC SAMs of higher structural quality than ethanol, DMF, or toluene. TDS measurements revealed that the relative desorption intensities of octanethiolate (C8S(+), monomer) and dioctyl disulfide (C8SSC8(+), dimer) to octanethiol (C8SH(+)) fragments for OTC SAMs were much weaker than those of OT SAMs. This is because desorption of monomers and dimers is strongly suppressed by low surface coverage of OTC SAMs, as revealed by STM observations.

ZnO/Graphene Oxide on Halloysite Nanotubes as a Superabsorbent Nanocomposite Photocatalyst for the Degradation of Organic Dyes.

Using renewable photocatalysts for pollutant degradation represents a promising approach to addressing environmental water challenges by harnessing solar energy without additional energy consumption. However, for the practical use of photocatalysts, it is necessary to improve catalyst efficiency, considering cost and biocompatibility. In this study, we developed a new superabsorbent photocatalyst for the degradation of organic dyes in water. Our photocatalyst comprises halloysite nanotubes (HNTs) with a large outer diameter and Si-O and Al-O groups on the outer and inner surfaces, respectively; graphene oxide (GO) possessing numerous sp2 bonds and light-conductive properties; and ZnO, which can degrade organic molecules via a photon source. By exploiting the superabsorbent properties of GOs for organic dyes and stabilizing ZnO nanoparticles on HNTs to inhibit aggregation, our photocatalysts demonstrated significantly improved degradability compared to ZnO nanoparticles alone and combinations of ZnO with HNTs or GO. The structural characteristics of the nanocomposites were characterized using SEM, EDX, Raman spectroscopy, and XRD. Their enhanced photocatalytic activity was demonstrated by the degradation of rhodamine b in water, showing 95% photodegradation under UV illumination for 60 min, while the ZnO nanoparticles showed only 56% dye degradation under the same condition. Additionally, the degradation rate was enhanced by four times. Furthermore, the catalysts maintained their initial activity with no significant loss after four uses, showing their potential for practical implementation in the mass purification of wastewater.

An alkyl spacer effect on the structure of 4-fluorobenzenethiol and 4-fluorobenzenemethanethiol self-assembled monolayers on Au(111).

Self-assembled monolayers (SAMs) formed by the adsorption of 4-fluorobenzenethiol (4-FBT) and 4-fluorobenzenemethanethiol (4-FBMT) on Au(111) were examined by scanning tunneling microscopy (STM) to understand the effect of a flexible methylene spacer between the sulfur head-group and phenyl group and the effect of solution temperature on the formation and structure of the SAMs. Although the adsorption of 4-FBT on Au(111) at room temperature for 24 h generated only disordered phase SAMs containing gold adatom islands, 4-FBT at 75 degrees C for 2 h formed mixed SAMs: disordered phases and ordered (2 x 12√(2))R10 degrees superlattice with a rectangular unit cell containing six adsorbed molecules. On the other hand, SAMs formed from 4-FBMT, with a methylene spacer, at room temperature for 24 h on Au(111) had irregularly ordered phases containing uniformly distributed VIs with lateral dimensions of 2-5 nm; SAMs formed from 4-FBMT at 75 degrees C for 2 h were composed of slightly improved ordered phases and larger VIs with lateral dimensions of 5-12 nm as a result of Ostwald ripening. From this study, we found that the methylene spacer plays an important role in controlling the structure of SAMs formed from p-substituted fluorinated aromatic thiols.

Unique ordered domains of biphenylthiol self-assembled monolayers on Au(111).

The surface structure and adsorption conditions of biphenylthiol (BPT) self-assembled monolayers (SAMs) on Au(111) were examined using scanning tunneling microscopy (STM) and X-ray photoelectron microscopy (XPS). STM imaging revealed that the structural order of BPT SAMs formed in a 0.01 mM ethanol solution at 60 degrees C decreases with increasing immersion time. Interestingly, BPT SAMs formed after 30 min have unique ordered domains containing well-ordered (square root of 3 x square root of 3)R30 degrees structures and bright rows that are connected by small aggregated domains with a periodicity of approximately 10 angstroms, results that have never been observed for other thiol SAM systems. Distances between the bright rows were 20-35 angstroms. The bright small domains contained five or six BPT molecules each, which may have originated from differences in the adsorption orientations of biphenyl groups that were induced by localized interactions between them. XPS measurements for BPT SAMs on Au(111) showed the two sulfur peaks at 161.2 and 162.2 eV, implying the formation of chemisorbed monolayers. Our results are anticipated to be useful for understanding the formation and structure of BPT SAMs on gold surfaces.

Strainer-Separable TiO2 on Halloysite Nanocomposite-Embedded Alginate Capsules with Enhanced Photocatalytic Activity for Degradation of Organic Dyes.

Photocatalysis driven by natural sunlight is an attractive approach to removing pollutants from wastewater. Although TiO2-based photocatalysts using various support nano-materials with high catalytic activity and reusability have been developed for purifying wastewater, the centrifugal separation methods used for the nanocatalysts limit their use for treating large amounts of water. Here, we prepared a TiO2 nano-catalyst supported on a halloysite nanotube (HNT)-encapsulated alginate capsule (TiO2@HNT/Alcap) to recapture the catalysts rapidly without centrifugation. The structure of TiO2@HNT/Alcap was characterized by X-ray diffraction, SEM, and TGA. In our system, the combination of HNTs and alginate capsules (Alcaps) improved the efficiency of adsorption of organic pollutants to TiO2, and their milli = meter scale structure allowed ultra-fast filtering using a strainer. The TiO2@HNT/Alcaps showed ~1.7 times higher adsorption of rhodamine B compared to empty alginate capsules and also showed ~10 and ~6 times higher degradation rate compared to the HNT/Alcaps and TiO2/Alcaps, respectively.

Molecular-scale investigation of tolane disulfide self-assembled monolayers on Au(111) using scanning tunneling microscopy.

Molecular-scale surface structures of self-assembled monolayers (SAMs) formed by the spontaneous adsorption of tolane disulfides (TDS) on Au(111) in a 1 mM mixed solution of ethanol/N, N'-dimethylformamide (9:1) were examined using scanning tunneling microscopy (STM). The STM study revealed that TDS SAMs formed after a 24 h immersion at room temperature were composed of two-dimensional (2D) ordered phases with inhomogeneous surface morphologies and no clear domain boundaries. However, after 2 h immersion at 50 degrees C, uniform 2D ordered domains with clear domain boundaries were observed, which could be described as c(3 x square root of 3) structures with centered rectangular unit cell. Interestingly, a unique intermediate ordered phase with a low surface coverage was also observed. After a longer immersion for 24 h at 50 degrees C, only the uniform c(3 x square root of 3) domains were observed with a corrugation that may have reflected surface reconstruction of the Au(111) surfaces. From this study, we found that 2D ordered TDS SAMs with large and uniform domains on Au(111) can be obtained by controlling the solution temperature and immersion time.

Enhanced photocurrent generation of binary self-assembled monolayers of di-(3-aminopropyl)-viologen and methylviologen on indium tin oxide.

The binary self-assembled monolayers (SAMs) of di-(3-aminopropyl)-viologen (DAPV) and methylviologen (MV) molecules on indium tin oxide (ITO) were prepared by dipping the DAPV SAMs/ITO substrates into MV solution. The DAPV-MV SAM films were characterized by UV-vis. absorption spectroscopy, Rutherford backscattering spectroscopy, and cyclic voltammetry. Optical band gap, lowest unoccupied molecular orbital, and highest occupied molecular orbital of DAPV-MV SAMs were measured to be 1.6, -4.3, and -5.9 eV, respectively. We found that although DAPV SAMs have a quantum yield of 0.11%, the binary SAM films have a good quantum yield of 2.30%, which was 20 times higher than that of DAPV SAMs on ITO. This result may be due to the higher adsorption property of the binary SAMs for the light in visible range compared to that of DAPV SAMs. From this study, we demonstrated that the photocurrent generation systems with a high quantum yield can be obtained by the functional binary SAMs.

Self-assembly using a retro Diels-Alder reaction.

Despite their great utility in synthetic and materials chemistry, Diels-Alder (DA) and retro Diels-Alder (rDA) reactions have been vastly unexplored in promoting self-assembly processes. Herein we describe the first example of a retro Diels-Alder (rDA) reaction-triggered self-assembly method. Release of the steric bulkiness associated with the bridged bicyclic DA adduct by the rDA reaction allowed generation of two building blocks that spontaneously self-assembled to form a supramolecular polymer. By employing photopolymerizable lipid building blocks, we demonstrated the efficiency of the rDA-based self-assembly strategy. Generation of reactive functional groups (maleimide and furan) that can be used for further modification of the supramolecular polymer is an additional meritorious feature of the rDA-based approach. Advantage was taken of reactive functional groups to fabricate stimulus-responsive selective and tunable colorimetric sensors. The strategy developed in this study should be useful for the design of systems that participate in triggered molecular assembly.