RESUMEN
Electrically conductive 3D periodic microscaffolds are fabricated using a particle-free direct ink writing approach for use as neuronal growth and electrophysiological recording platforms. A poly (2-hydroxyethyl methacrylate) (pHEMA)/pyrrole ink, followed by chemical in situ polymerization of pyrrole, enables hydrogel printing through nozzles as small as 1 µm. These conductive hydrogels can pattern complex 2D and 3D structures and have good biocompatibility with test cell cultures (~94.5% viability after 7 days). Hydrogel arrays promote extensive neurite outgrowth of cultured Aplysia californica pedal ganglion neurons. This platform allows extracellular electrophysiological recording of steady-state and stimulated electrical neuronal activities. In summation, this 3D conductive ink printing process enables preparation of biocompatible and micron-sized structures to create customized in vitro electrophysiological recording platforms.
RESUMEN
Recent work demonstrates that processes of stress release in prestrained elastomeric substrates can guide the assembly of sophisticated 3D micro/nanostructures in advanced materials. Reported application examples include soft electronic components, tunable electromagnetic and optical devices, vibrational metrology platforms, and other unusual technologies, each enabled by uniquely engineered 3D architectures. A significant disadvantage of these systems is that the elastomeric substrates, while essential to the assembly process, can impose significant engineering constraints in terms of operating temperatures and levels of dimensional stability; they also prevent the realization of 3D structures in freestanding forms. Here, we introduce concepts in interfacial photopolymerization, nonlinear mechanics, and physical transfer that bypass these limitations. The results enable 3D mesostructures in fully or partially freestanding forms, with additional capabilities in integration onto nearly any class of substrate, from planar, hard inorganic materials to textured, soft biological tissues, all via mechanisms quantitatively described by theoretical modeling. Illustrations of these ideas include their use in 3D structures as frameworks for templated growth of organized lamellae from AgCl-KCl eutectics and of atomic layers of WSe2 from vapor-phase precursors, as open-architecture electronic scaffolds for formation of dorsal root ganglion (DRG) neural networks, and as catalyst supports for propulsive systems in 3D microswimmers with geometrically controlled dynamics. Taken together, these methodologies establish a set of enabling options in 3D micro/nanomanufacturing that lie outside of the scope of existing alternatives.
Asunto(s)
Nanoestructuras/química , Andamios del Tejido/química , Animales , Ganglios Espinales/citología , Masculino , Red Nerviosa/citología , Impresión Tridimensional , Ratas , Ratas Sprague-Dawley , Temperatura , Ingeniería de Tejidos/métodosRESUMEN
Emerging classes of concentrator photovoltaic (CPV) modules reach efficiencies that are far greater than those of even the highest performance flat-plate PV technologies, with architectures that have the potential to provide the lowest cost of energy in locations with high direct normal irradiance (DNI). A disadvantage is their inability to effectively use diffuse sunlight, thereby constraining widespread geographic deployment and limiting performance even under the most favorable DNI conditions. This study introduces a module design that integrates capabilities in flat-plate PV directly with the most sophisticated CPV technologies, for capture of both direct and diffuse sunlight, thereby achieving efficiency in PV conversion of the global solar radiation. Specific examples of this scheme exploit commodity silicon (Si) cells integrated with two different CPV module designs, where they capture light that is not efficiently directed by the concentrator optics onto large-scale arrays of miniature multijunction (MJ) solar cells that use advanced III-V semiconductor technologies. In this CPV+ scheme ("+" denotes the addition of diffuse collector), the Si and MJ cells operate independently on indirect and direct solar radiation, respectively. On-sun experimental studies of CPV+ modules at latitudes of 35.9886° N (Durham, NC), 40.1125° N (Bondville, IL), and 38.9072° N (Washington, DC) show improvements in absolute module efficiencies of between 1.02% and 8.45% over values obtained using otherwise similar CPV modules, depending on weather conditions. These concepts have the potential to expand the geographic reach and improve the cost-effectiveness of the highest efficiency forms of PV power generation.
RESUMEN
The development of methods to synthesize and physically manipulate extremely thin, single-crystalline inorganic semiconductor materials, so-called nanomembranes, has led to an almost explosive growth of research worldwide into uniquely enabled opportunities for their use in new "soft" and other unconventional form factors for high-performance electronics. The unique properties that nanomembranes afford, such as their flexibility and lightweight characteristics, allow them to be integrated into electronic and optoelectronic devices that, in turn, adopt these unique attributes. For example, nanomembrane devices are able to make conformal contact to curvilinear surfaces and manipulate strain to induce the self-assembly of various 3D nano/micro device architectures. Further, thin semiconductor materials (e.g., Si-nanomembranes, transition metal dichalcogenides, and phosphorene) are subject to the impacts of quantum and other size-dependent effects that in turn enable the manipulation of their bandgaps and the properties of electronic and optoelectronic devices fabricated from them. In this Perspective, nanomembrane synthesis techniques and exemplary applications of their use are examined. We specifically describe nanomembrane chemistry exploiting high-performance materials, along with precise/high-throughput techniques for their manipulation that exemplify their growing capacities to shape outcomes in technology. Prominent challenges in the chemistry of these materials are presented along with future directions that might guide the development of next generation nanomembrane-based devices.
RESUMEN
We demonstrate that solid-liquid nanocomposites derived from porous organic cages are effective lithium ion electrolytes at room temperature. A solid-liquid electrolyte nanocomposite (SLEN) fabricated from a LiTFSI/DME electrolyte system and a porous organic cage exhibits ionic conductivity on the order of 1 × 10-3 S cm-1. With an experimentally measured activation barrier of 0.16 eV, this composite is characterized as a superionic conductor. Furthermore, the SLEN displays excellent oxidative stability up to 4.7 V vs Li/Li+. This simple three-component system enables the rational design of electrolytes from tunable discrete molecular architectures.
RESUMEN
Shape-morphing systems can be found in many areas, including smart textiles, autonomous robotics, biomedical devices, drug delivery and tissue engineering. The natural analogues of such systems are exemplified by nastic plant motions, where a variety of organs such as tendrils, bracts, leaves and flowers respond to environmental stimuli (such as humidity, light or touch) by varying internal turgor, which leads to dynamic conformations governed by the tissue composition and microstructural anisotropy of cell walls. Inspired by these botanical systems, we printed composite hydrogel architectures that are encoded with localized, anisotropic swelling behaviour controlled by the alignment of cellulose fibrils along prescribed four-dimensional printing pathways. When combined with a minimal theoretical framework that allows us to solve the inverse problem of designing the alignment patterns for prescribed target shapes, we can programmably fabricate plant-inspired architectures that change shape on immersion in water, yielding complex three-dimensional morphologies.
Asunto(s)
Materiales Biomiméticos , Pared Celular/química , Celulosa/química , Modelos Teóricos , Plantas/química , AnisotropíaRESUMEN
We describe a reflection imaging system that consists of a plasmonic crystal, a common laboratory microscope, and band-pass filters for use in the quantitative imaging and in situ monitoring of live cells and their substrate interactions. Surface plasmon resonance (SPR) provides a highly sensitive method to monitor changes in physicochemical properties occurring at metal-dielectric interfaces. Polyelectrolyte thin films deposited using the layer-by-layer (LBL) self-assembly method provide a reference system for calibrating the reflection contrast changes that occur when the polyelectrolyte film thickness changes and provide insight into the optical responses that originate from the multiple plasmonic features supported by this imaging system. Finite-difference time-domain (FDTD) simulations of the optical responses measured experimentally from the polyelectrolyte reference system are used to provide a calibration of the optical system for subsequent use in quantitative studies investigating live cell dynamics in cultures supported on a plasmonic crystal substrate. Live Aplysia californica pedal ganglion neurons cultured in artificial seawater were used as a model system through which to explore the utility of this plasmonic imaging technique. Here, the morphology of cellular peripheral structures â²80 nm in thickness were quantitatively analyzed, and the dynamics of their trypsin-induced surface detachment were visualized. These results illustrate the capacities of this system for use in investigations of the dynamics of ultrathin cellular structures within complex bioanalytical environments.
Asunto(s)
Aplysia/química , Animales , Nanoestructuras , Neuronas , Dispositivos Ópticos , Resonancia por Plasmón de SuperficieRESUMEN
Expenses associated with shipping, installation, land, regulatory compliance and on-going maintenance and operations of utility-scale photovoltaics can be significantly reduced by increasing the power conversion efficiency of solar modules through improved materials, device designs and strategies for light management. Single-junction cells have performance constraints defined by their Shockley-Queisser limits. Multi-junction cells can achieve higher efficiencies, but epitaxial and current matching requirements between the single junctions in the devices hinder progress. Mechanical stacking of independent multi-junction cells circumvents these disadvantages. Here we present a fabrication approach for the realization of mechanically assembled multi-junction cells using materials and techniques compatible with large-scale manufacturing. The strategy involves printing-based stacking of microscale solar cells, sol-gel processes for interlayers with advanced optical, electrical and thermal properties, together with unusual packaging techniques, electrical matching networks, and compact ultrahigh-concentration optics. We demonstrate quadruple-junction, four-terminal solar cells with measured efficiencies of 43.9% at concentrations exceeding 1,000 suns, and modules with efficiencies of 36.5%.
RESUMEN
We describe and characterize elementary designs for electrochemical micro- and macro-scale chemomechanical hydrogel actuators. The actuation of a pH-sensitive cross-linked polyacrylic acid (PAA) hydrogel is driven in the model devices through the oxygen reduction reaction (ORR) occurring at the electrodes of an embedded Au mesh micro-electrochemical array. Proton consumption by the ORR at the cathode of the embedded electrochemical cell leads to the formation of a localized pH gradient that in turn drives the strain response in the composite actuators. The dynamics result from the ionization of the carboxylic acid moieties of the PAA network in the high pH region, yielding an osmotic pressure that drives a volumetric expansion due to water imbibition. This system actuates both stably and reversibly; when the electrochemically-induced ORR is halted, the localized pH gradient dissipates due to diffusive mixing, which in turn relaxes the induced strains. Two approaches to the fabrication of hydrogel actuators were examined in this work. The first method adopted a design based on small flagella (â¼0.2 mm × 1.5 mm × 60 µm, width × length × height) in which the actuating PAA structures are molded atop a set of fixed electrodes mounted on a supporting substrate. These hydrogel actuators show fast, large-amplitude, and largely reversible responses in the ORR mediated chemomechanical dynamics. We also investigated larger hydrogel actuators (â¼4.5 mm × 11 mm × 1 mm, width × length × height), based on an autonomous design that embeds an open mesh stretchable micro-electrode array within the hydrogel. The significant and design-dependent impacts of mass transfer on the chemomechanical dynamics are evidenced in each case, a feature examined to elucidate more efficient mesoscopic design rules for actuators of this form.
RESUMEN
The power efficiency, spectral characteristics, and output directionality of light emitting diodes (LEDs) used for lighting and video display may be tailored by integrating nanostructures that interact with photon emitters. In this work, we demonstrate an approach in which visible-wavelength-emitting quantum dots (QDs) are integrated within a polymer-based photonic crystal (PC) and excited by an ultraviolet-emitting LED. The PC design incorporates two interleaved regions, each with distinct periods in orthogonal directions. The structure enables simultaneous resonant coupling of ultraviolet excitation photons to the QDs and visible QD emission at two different wavelengths to efficiently extract photons normal to the PC surface. The combined excitation and extraction enhancements result in a 5.8X increase in the QD output intensity. Further, we demonstrate multiple QD-doped PCs combined on a single surface to optimally couple with distinct populations of QDs, offering a means for blending color output and directionality of multiple wavelengths. Devices are fabricated upon flexible plastic surfaces by a manufacturable replica molding approach.
RESUMEN
Microcantilever stress measurements are examined to contrast and compare their attributes with those from in situ X-ray absorption spectroscopy to elucidate bonding dynamics during the oxygen reduction reaction (ORR) on a Pt catalyst. The present work explores multiple atomistic catalyst properties that notably include features of the Pt-Pt bonding and changes in bond strains that occur upon exposure to O2 in the electrochemical environment. The alteration of the Pt electronic and physical structures due to O2 exposure occurs over a wide potential range (1.2 to 0.4 V vs normal hydrogen electrode), a range spanning potentials where Pt catalyzes the ORR to those where Pt-oxide forms and all ORR activity ceases. We show that Pt-Pt surface bond strains due to oxygen interactions with Pt-Pt bonds are discernible at macroscopic scales in cantilever-based bending measurements of Pt thin films under O2 and Ar. Complementary extended X-ray absorption fine structure (EXAFS) measurements of nanoscale Pt clusters supported on carbon provide an estimate of the magnitude and direction of the in-operando bond strains. The data show that under O2 the M-M bonds elongate as compared to an N2 atmosphere across a broad range of potentials and ORR rates, an interfacial bond expansion that falls within a range of 0.23 (±0.15)% to 0.40 (±0.20)%. The EXAFS-measured Pt-Pt bond strains correspond to a stress thickness and magnitude that is well matched to the predictions of a mechanics mode applied to experimentally determined data obtained via the cantilever bending method. The data provide new quantitative understandings of bonding dynamics that will need to be considered in theoretical treatments of ORR catalysis and substantiate the subpicometer resolution of electrochemically mediated bond strains detected on the macroscale.
RESUMEN
Determination of the factors that affect the d-band center of catalysts is required to explain their catalytic properties. Resonant inelastic X-ray scattering (RIXS) enables direct imaging of electronic transitions in the d-band of Pt catalysts in real time and in realistic environmental conditions. Through a combination of in situ, temperature-resolved RIXS measurements and theoretical simulations we isolated and quantified the effects of bond-length disorder and adsorbate coverage (CO and H2) on the d-band center of 1.25 nm size Pt catalysts supported on carbon. We found that the decrease in adsorbate coverage at elevated temperatures is responsible for the d band shifts towards higher energies relative to the Fermi level, whereas the effect of the increase in bond-length disorder on the d-band center is negligible. Although these results were obtained for a specific case of non-interacting support and weak temperature dependence of the metal-metal bond length in a model catalyst, this work can be extended to a broad range of real catalysts.
RESUMEN
Recently developed classes of monocrystalline silicon solar microcells (µ-cell) can be assembled into modules with characteristics (i.e., mechanically flexible forms, compact concentrator designs, and high-voltage outputs) that would be impossible to achieve using conventional, wafer-based approaches. In this paper, we describe a highly dense, uniform and non-periodic nanocone forest structure of black silicon (bSi) created on optically-thin (30 µm) µ-cells for broadband and omnidirectional light-trapping with a lithography-free and high-throughput plasma texturizing process. With optimized plasma etching conditions and a silicon nitride passivation layer, black silicon µ-cells, when embedded in a polymer waveguiding layer, display dramatic increases of as much as 65.7% in short circuit current, as compared to a bare silicon device. The conversion efficiency increases from 8.1% to 11.5% with a small drop in open circuit voltage and fill factor.
RESUMEN
Properties that can now be achieved with advanced, blue indium gallium nitride light emitting diodes (LEDs) lead to their potential as replacements for existing infrastructure in general illumination, with important implications for efficient use of energy. Further advances in this technology will benefit from reexamination of the modes for incorporating this materials technology into lighting modules that manage light conversion, extraction, and distribution, in ways that minimize adverse thermal effects associated with operation, with packages that exploit the unique aspects of these light sources. We present here ideas in anisotropic etching, microscale device assembly/integration, and module configuration that address these challenges in unconventional ways. Various device demonstrations provide examples of the capabilities, including thin, flexible lighting "tapes" based on patterned phosphors and large collections of small light emitters on plastic substrates. Quantitative modeling and experimental evaluation of heat flow in such structures illustrates one particular, important aspect of their operation: small, distributed LEDs can be passively cooled simply by direct thermal transport through thin-film metallization used for electrical interconnect, providing an enhanced and scalable means to integrate these devices in modules for white light generation.
RESUMEN
We show that the noncrystalline-to-crystalline transition of supported Pt nanoparticles (NPs) in the subnanometer to nanometer size range is statistical in nature, and strongly affected by particle size, support, and adsorbates (here we use H2). Unlike in the bulk, a noncrystalline phase exists and is stable in small NPs, reflecting a general mesoscopic feature. Observations of >3000 particles by high-resolution transmission electron microscopy show a noncrystalline-to-crystalline transition zone that is nonabrupt; there is a size regime where disordered and ordered NPs coexist. The NP size at which this transition occurs is strongly dependent on both the adsorbate and the support, and this effect is general for late 5d transition metals. All results are reconciled via a statistical description of particle-support-adsorbate interactions.
Asunto(s)
Nanopartículas del Metal/química , Platino (Metal)/química , Cristalización , Tamaño de la Partícula , Propiedades de SuperficieRESUMEN
Layers of poly(methyl methacrylate) doped with the Eu complex Eu(DPEPO)(hfac)3 (EuDH) provide a means for down-shifting incident ultraviolet (UV) light into the visible range, with beneficial effects on the performance of solar cells, as demonstrated with thin-film InGaP devices formed by epitaxial liftoff. Experimental and computational results establish important aspects of gain and loss mechanisms in the UV range. Measurements show that InGaP cells with coatings of EuDH doped PMMA exhibit enhanced currents (8.68 mA cm(-2)) and power conversion efficiencies (9.48%), both due to increased responses at wavelengths between 300-360 nm.
RESUMEN
Partial coordination numbers measured by extended X-ray absorption fine structure (EXAFS) spectroscopy have been used for decades to resolve between different compositional motifs in bulk and nanoscale bimetallic alloys. Due to the ensemble-averaging nature of EXAFS, the values of the coordination numbers in nanoparticles cannot be simply interpreted in terms of the degree of alloying or segregation if the compositional distribution is broad. We demonstrate that a Cowley short range order parameter is an objective measure of either the segregation tendency (e.g., a core-shell type) or the degree of randomness (in homogeneous nanoalloys). This criterion can be used even in the case when the clusters are random but have broad compositional distributions. All cases are illustrated using the analyses of EXAFS data obtained in three different nanoscale bimetallic systems: Pt(core)-Pd(shell), Pd(core)-Pt(shell), and Pt-Pd random alloy.
RESUMEN
Transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) are popular and powerful techniques used to characterize heterogeneous catalysts. Rapid developments in electron microscopy--especially aberration correctors and in situ methods--permit remarkable capabilities for visualizing both morphologies and atomic and electronic structures. The purpose of this review is to summarize the significant developments and achievements in this field with particular emphasis on the characterization of catalysts. We also highlight the potential and limitations of the various methods, describe the need for synergistic and complementary tools when characterizing heterogeneous catalysts, and conclude with an outlook that also envisions future needs in the field.
RESUMEN
"Single - atom" catalysts (SACs) have been the focus of intense research, due to debates about their reactivity and challenges toward determining and designing "single - atom" (SA) sites. To address the challenge, in this work, we designed Pt SACs supported on Gd-doped ceria (Pt/CGO), which showed improved activity for CO oxidation compared to its counterpart, Pt/ceria. The enhanced activity of Pt/CGO was associated with a new Pt SA site which appeared only in the Pt/CGO catalyst under CO pretreatment at elevated temperatures. Combined X-ray and optical spectroscopies revealed that, at this site, Pt was found to be d-electron rich and bridged with Gd-induced defects via an oxygen vacancy. As explained by density functional theory calculations, this site opened a new path via a dicarbonyl intermediate for CO oxidation with a greatly reduced energy barrier. These results provide guidance for rationally improving the catalytic properties of SA sites for oxidation reactions.
RESUMEN
An in situ electrochemical X-ray absorption spectroscopy (XAS) cell has been fabricated that enables high oxygen flux to the working electrode by utilizing a thin poly(dimethylsiloxane) (PDMS) window. This cell design enables in situ XAS investigations of the oxygen reduction reaction (ORR) at high operating current densities greater than 1 mA in an oxygen-purged environment. When the cell was used to study the ORR for a Pt on carbon electrocatalyst, the data revealed a progressive evolution of the electronic structure of the metal clusters that is both potential-dependent and strongly current-dependent. The trends establish a direct correlation to d-state occupancies that directly tracks the character of the Pt-O bonding present.