Synthesis, Crystal Structure, and Theoretical Screening of Solvatochromism and Light-Harvesting Performance of Hexamine V-Substituted Lindqvist-Based Photosensitizer for Photovoltaic Solar Cells.

In this paper, we employ density functional theory (DFT) and time-dependent DFT (TD-DFT) approaches to predict the solvatochromism and light-harvesting properties of a newly synthesized hybrid hexamine (HMTA) vanadium-substituted Lindqvist-type (V 2 W 4 ) polyoxometalate (POM), (C7H15N4O)2(C6H13N4)2[V2W4O19]·6H2O, (HMTA-V 2 W 4 ) for application in dye-sensitized solar cells (DSSCs). Single crystal X-ray diffraction (XRD) and noncovalent interaction (NCI) analyses show a 3D-supramolecular packing stabilized by means of hydrogen bonds and van der Waals (vdW) and ionic interactions between highly nucleophilic cage-like HMTA surfactant, lattice water, and electrophilic V 2 W 4 polyanions. Experimental and theoretical UV/vis absorption spectra show large absorption in the visible region, which is strongly solvent polarity dependent. This solvatochromic behavior can be attributed to hydrogen bonding interactions between the V 2 W 4 polyanion and protic solvents. Furthermore, the energy level of semiconductor-like nature of HMTA-V 2 W 4 with high LUMO level matches well with the conduction band (CB) of TiO2, which is beneficial for the photovoltaic device performance. The photovoltaic empirical parameters are theoretically predicted to demonstrate a remarkably high open-circuit voltage (Voc) value (1.805 eV) and a photoelectric conversion efficiency (PCE) value up to 8.7% (FF = 0.88) along with superior light-harvesting efficiency (LHE) (0.7921), and therefore, the studied compound is expected to be a potential candidate as a photosensitizer dye for applications in DSSCs. The aim of this work was to broaden the range of applications of POMs, owing to their low-cost fabrication, leveraging and flourishing optoelectronic properties, and ever-improving efficiency and stability for use in future technology pointed to the development of clean and green renewable energy sources to solve the current energy crisis.

First-principle study of Cu-, Ag-, and Au-decorated Si-doped carbon quantum dots (Si@CQD) for CO2 gas sensing efficacies.

CONTEXT: Nanosensor materials for the trapping and sensing of CO2 gas in the ecosystem were investigated herein to elucidate the adsorption, sensibility, selectivity, conductivity, and reactivity of silicon-doped carbon quantum dot (Si@CQD) decorated with Ag, Au, and Cu metals. The gas was studied in two configurations on its O and C sites. When the metal-decorated Si@CQD interacted with the CO2 gas on the C adsorption site of the gas, there was a decrease in all the interactions with the lowest energy gap of 1.084 eV observed in CO2_C_Cu_Si@CQD followed by CO2_C_Au_Si@CQD which recorded a slightly higher energy gap of 1.094 eV, while CO2_C_Ag_Si@CQD had an energy gap of 2.109 eV. On the O adsorption sites, a decrease was observed in CO2_O_Au_Si@CQD which had the least energy gap of 1.140 eV, whereas there was a significant increase after adsorption in CO2_O_Ag_Si@CQD and CO2_O_Cu_Si@CQD with calculated ∆E values of 2.942 eV and 3.015 eV respectively. The adsorption energy alongside the basis set supposition error (BSSE) estimation reveals that CO2_C_Au_Si@CQD, CO2_C_Ag_Si@CQD, and CO2_C_Cu_Si@CQD were weakly adsorbed, while chemisorption was present in the CO2_O_Ag_Si@CQD, CO2_O_Cu_Si@CQD, and CO2_O_Au_Si@CQD interactions. Indeed, the adsorption of CO2 on the different metal-decorated quantum dots affects the Fermi level (Ef) and the work function (Φ) of each of the decorated carbon quantum dots owed to their low Ef values and high ∆Φ% which shows that they can be a prospective work function-based sensor material. METHODS: Electronic structure theory method based on first-principle density functional theory (DFT) computation at the B3LYP-GD3(BJ)/Def2-SVP level of theory was utilized through the use of the Gaussian 16 and GaussView 6.0.16 software packages. Post-processing computational code such as multi-wavefunction was employed for result analysis and visualization.

Exploring the potential of single-metals (Cu, Ni, Zn) decorated Al12N12 nanostructures as sensors for flutamide anticancer drug.

In recent years, scientists have been actively exploring and expanding biosensor technologies and materials to meet the growing societal demands in healthcare and other fields. This study aims to revolutionize biosensors by using density functional theory (DFT) at the cutting-edge B3LYP-GD3BJ/def2tzsvp level to investigate the sensing capabilities of (Cu, Ni, and Zn) doped on Aluminum nitride (Al12N12) nanostructures. Specifically, we focus on their potential to detect, analyze, and sense the drug flutamide (FLU) efficiently. Through advanced computational techniques, we explore molecular interactions to pave the way for highly effective and versatile biosensors. The adsorption energy values of -38.76 kcal/mol, -39.39 kcal/mol, and -39.37 kcal/mol for FLU@Cu-Al12N12, FLU@Ni-Al12N12, and FLU@Zn-Al12N12, respectively, indicate that FLU chemically adsorbs on the studied nanostructures. The reactivity and conductivity of the system follow a decreasing pattern: FLU@Cu-Al12N12 > FLU@Ni-Al12N12 > FLU@Zn-Al12N12, with a band gap of 0.267 eV, 2.197 eV, and 2.932 eV, respectively. These results suggest that FLU preferably adsorbs on the Al12N12@Cu surface. Natural bond orbital analysis reveals significant transitions in the studied system. Quantum theory of atom in molecule (QTAIM) and Non-covalent interaction (NCI) analysis confirm the nature and strength of interactions. Overall, our findings indicate that the doped surfaces show promise as electronic and biosensor materials for detection of FLU in real-world applications. We encourage experimental researchers to explore the use of (Cu, Ni, and Zn) doped on Aluminum nitride (Al12N12), particularly Al12N12@Cu, for biosensor applications.

Insights into in-vitro studies and molecular modelling of the antimicrobial efficiency of 4-chlorobenzaldehyde and 4-methoxybenzaldehyde derivatives.

Owing to the significant gap in the knowledge and understanding of the mechanisms of antimicrobial action and the development of resistance, the optimization of antimicrobial therapies therefore becomes a necessity. It is on this note, that this study seeks to both experimentally and theoretically investigate the antimicrobial efficiency of two synthesized compounds namely; 1-((4-methoxyphenyl) (morpholino)methyl)thiourea (MR1) and diethyl 4-(4-chlorophenyl)-2,6-diphenyl-1,4-dihydropyridine-3,5-dicarboxylate (HRC). Utilizing the density functional theory (DFT), the compounds were optimized at ωB97XD/6-31++G(2d, 2p) level of theory. This provided a clear explanation for their distinct reactivity and stability potentials. More so, the natural bond orbital (NBO) analysis confirmed strong intra and intermolecular interactions, which agreed with the calculated reactivity parameters and density of states (DOS). Upon assessing the antimicrobial efficacy of the synthesized compounds, it was found that they exhibited lower activity against Enterobacter and A. niger, but considerable activity against Moraxella. In contrast, they showed higher activity against B. subtilis and Trichophyton, indicating that the compounds are more effective against gram-positive bacteria than gram-negative ones. Hence, it can be asserted that the synthesized compounds have superior antifungal action than antibacterial activity. A fascinating aspect of the data is that they show interactions that are incredibly insightful, totally correlating with the simulations of both molecular docking and molecular dynamics. Therefore, the alignment between experimental findings and computational simulations strengthens the validity of the study's conclusions, emphasizing the significance of the synthesized compounds in the context of optimizing antimicrobial therapies.Communicated by Ramaswamy H. Sarma.

Modeling of magnesium-decorated graphene quantum dot nanostructure for trapping AsH3, PH3 and NH3 gases.

A magnesium-decorated graphene quantum dot (C24H12-Mg) surface has been examined theoretically using density functional theory (DFT) computations at the ωB97XD/6-311++G(2p,2d) level of theory to determine its sensing capability toward XH3 gases, where X = As, N and P, in four different phases: gas, benzene solvent, ethanol solvent and water. This research was carried out in different phases in order to predict the best possible phase for the adsorption of the toxic gases. Analysis of the electronic properties shows that in the different phases the energy gap follows the order NH3@C24H12-Mg < PH3@C24H12-Mg < AsH3@C24H12-Mg. The results obtained from the adsorption studies show that all the calculated adsorption energies are negative, indicating that the nature of the adsorption is chemisorption. The adsorption energies can be arranged in an increasing trend of NH3@C24H12-Mg < PH3@C24H12-Mg < AsH3@C24H12-Mg. The best adsorption performance was noted in the gas phase compared to the other studied counterparts. The interaction between the adsorbed gases and the surfaces shows a non-covalent interaction nature, as confirmed by the quantum theory of atoms-in-molecules (QTAIM) and non-covalent interactions (NCI) analysis. The overall results suggest that we can infer that the surface of the magnesium-decorated graphene quantum dot C24H12-Mg is more efficient for sensing the gas AsH3 than PH3 and NH3.

Metals (Ga, In) decorated fullerenes as nanosensors for the adsorption of 2,2-dichlorovinyldimethylphosphate agrochemical based pollutant.

Owing to the fact that the use of 2,2-dichlorovinyldimethylphosphate (DDVP) as an agrochemical has become a matter of concern due to its persistence and potential harm to the environment and human health. Detecting and addressing DDVP contamination is crucial to protect human health and mitigate ecological impacts. Hence, this study focuses on harnessing the properties of fullerene (C60) carbon materials, known for their biological activities and high importance, to develop an efficient sensor for DDVP. Additionally, the sensor's performance is enhanced by doping it with gallium (Ga) and indium (In) metals to investigate the sensing and trapping capabilities of DDVP molecules. The detection of DDVP is carefully examined using first-principles density functional theory (DFT) at the Def2svp/B3LYP-GD3(BJ) level of theory, specifically analyzing the adsorption of DDVP at the chlorine (Cl) and oxygen (O) sites. The adsorption energies at the Cl site were determined as - 57.894 kJ/mol, - 78.107 kJ/mol, and - 99.901 kJ/mol for Cl_DDVP@C60, Cl_DDVP@Ga@C60, and Cl_DDVP@In@C60 interactions, respectively. At the O site, the adsorption energies were found to be - 54.400 kJ/mol, - 114.060 kJ/mol, and - 114.056 kJ/mol for O_DDVP@C60, O_DDVP@Ga@C60, and O_DDVP@In@C60, respectively. The adsorption energy analysis highlights the chemisorption strength between the surfaces and the DDVP molecule at the Cl and O sites of adsorption, indicating that the O adsorption site exhibits higher adsorption energy, which is more favorable according to the thermodynamics analysis. Thermodynamic parameters (∆H and ∆G) obtained from this adsorption site suggest considerable stability and indicate a spontaneous reaction in the order O_DDVP@Ga@C60 > O_DDVP@In@C60 > O_DDVP@C60. These findings demonstrate that the metal-decorated surfaces adsorbed on the oxygen (O) site of the biomolecule offer high sensitivity for detecting the organophosphate molecule DDVP.

Systematic exo-endo encapsulation of hydroxyurea (HU) by Cu, Ag, and Au-doped gallium nitride nanotubes (GaNNT) for smart therapeutic delivery.

Similar to the more well-known carbon nanotubes, gallium nitride nanotubes (GaNNT) are among the materials that scientists have found to be extremely helpful in transporting drugs and to provide significant potential for multi-modal medical therapies. Here, the potential of Cu, Ag, and Au-doped GaNNT for smart delivery of the anticancer medication hydroxyurea (HU) was extensively investigated employing quantum chemical analysis and density functional theory (DFT) computation at the B3LYP-GD3BJ/def2-SVP level of theory. The systematic approach used in this study entails examining the exo (outside)-and endo (inside) loading of HU utilizing the investigated nanotubes in order to understand the adsorption, sensing processes, bonding types, and thermodynamic properties. Results of the HOMO-LUMO studies show that metal-doped GaNNTs with the hydroxyurea (HU) at the endo - interaction of the drug of the nanotube produced more reduced energy gaps (0.911-2.039 eV) compared with metal-doped GaNNTs complexes at the outside - interaction of the drug on the nanotube (2.25-3.22 eV) and as such reveal their suitability for use as drug delivery materials. As observed in the endo-interaction of HU adsorptions in the tubes, HU_endo_Au@GaNNT possessed the highest adsorption energy values of -118.716 kcal/mol which shows the most chemisorption between the surfaces and the adsorbate while for HU_exo_Ag@GaNNT is -97.431 kcal/mol for the highest exo-interactions. These results suggest that HU drug interacted inside the Ag, Au, and Cu doped GaNNT will be very proficient as a carrier of the HU drug into bio systems. These results are along with visual studies of weak interactions, thermodynamics, sensor, and drug release mechanisms suggest strongly the endo-encapsulation of HU as the best mode for smart drug delivery.

Transition Metal-Decorated B12N12-X (X = Au, Cu, Ni, Os, Pt, and Zn) Nanoclusters as Biosensors for Carboplatin.

Theoretical studies on the adsorption, sensibility, and reactivity of a boron nitride nanocage decorated with Au, Cu, Ni, Os, Pt, and Zn metals as a biosensor material were carried out for the adsorption of carboplatin by applying the density functional theory computation at the B3LYP-GD3BJ/def2svp level of theory. All the optimized structures, as well as the calculations as regards the studied objective including electronic properties, geometry optimization parameters, adsorption energy studies, natural bond orbital analysis, topology studies, sensor mechanistic parameters, and thermodynamic properties (ΔG and ΔH), were investigated herein. As a result, the noticeable change in the energy gap of the studied surfaces when interacting with carboplatin accounted for the surfaces' reactivity, stability, conductivity, work function, and overall adsorption ability, implying that the studied decorated surfaces are good sensor materials for sensing carboplatin. Furthermore, the negative adsorption energies obtained for interacting surfaces decorated with Cu, Ni, Os, and Zn suggest that the surface has a superior ability to sense carboplatin as chemisorption was seen. Substantially, the geometric short adsorption bond length after adsorption, thermodynamically spontaneous reactions, and acceptable sensor mechanism results demonstrate that the investigated surfaces have strong sensing characteristics for sensing carboplatin.