Does Meaning-Making Mediate COVID-19 Restrictions' Impact on Grief and Psychological Symptoms?

The COVID-19 pandemic imposed substantial restrictions on funeral ceremonies, profoundly affecting grief experiences. This study investigated the mediating role of meaning-making in the relationship between these restrictions and prolonged grief disorder (PGD) symptoms, anxiety, depression, and trauma. A longitudinal study involving 141 bereaved individuals was conducted, with assessments at two time points: 3-6 months (T1) and 9-12 months (T2) post-loss. Structural equation modeling revealed that the psychological impact of restrictions on death and funeral ceremonies had indirect effects on anxiety and prolonged grief symptoms through meaning-making, particularly the footing in the world subscale. These findings underscore the importance of understanding the complex interplay between pandemic-related restrictions and grief experiences, emphasizing the pivotal role of meaning-making in adapting to loss during those challenging times.

Plant growth-promoting mechanisms and genetic diversity of bacteria strains isolated from Brachiaria humidicola and Brachiaria decumbens.

Plant growth-promoting bacteria (PGPB) have received great interest in recent decades. However, PGPB mechanisms remain poorly understood in forage species. We aimed to evaluate roots endophytic and rhizospheric bacteria strains from Brachiaria humidicola and Brachiaria decumbens. The strains were evaluated for biological nitrogen-fixing in saline stress (0 to 10.0 g L-1 of NaCl), N-acyl homoserine lactones and indole-like compounds (ILC) production, the activity of hydrolytic enzymes, and inorganic phosphate solubilization (IPS) under different C sources. The diversity of strains was assessed by BOX-PCR. About 58% of strains were positive for BNF. High salinity levels reduced the growth and BNF. About 58% produced N-acyl homoserine lactones. The ILC was present in 39% of strains. Cellulase, polygalacturonase, pectate lyase, and amylase production were observed in 77, 14, 22, and 25% of strains, respectively. The IPS was observed in 44, 81, and 87% of isolates when glucose, mannitol and sucrose were used, respectively. Comparing two plant species and niches, the strains associated with B. humidicola and root endophytic presented more PGPB mechanisms than others. We found high strain diversity, of which 64% showed similarity lower than 70%. These results can be supporting the bioproducts development to increase forage grasses production in tropical soils.

Evaluation of the Influence of Geodimensional and Histological Parameters on the Need for Margin Widening in Breast Lesions Marked With Magnetic Seeds.

Objective: Breast cancer is an important topic worldwide, posing morbidity and mortality to women. Considerable efforts have been put in the early recognition of malignancy through different screening methods, such as mammography and ultrasound. The precise localization of infraclinical malignant lesions is key in surgical management and magnetic seeds gather particular interest for this purpose. As with other systems, a need for reintervention may be needed to obtain adequate surgical margins. This work evaluated the relation between the need for surgical reintervention in order to obtain negative margins and geodimensional and histological parameters. The main objective was the identification of parameters significantly associated with reintervention for margin widening. Materials and Methods: A retrospective analysis of 198 patients from a single centre was performed. The association between pre-defined geodimensional and histological parameters and the need for margin widening in infraclinical lesions marked with magnetic seed was evaluated. Results: Results showed that reintervention to widen margins was significantly higher in patients with ductal carcinoma in situ (DCIS) in the pre-operative biopsy when compared with invasive carcinoma (p = 0.03) in the bivariate analysis. No statistically significant differences were observed between the need for reintervention and lesion size (p = 0.197), breast quadrant location (p = 0.626) and distance of skin to lesion (p = 0.356). Conclusion: This work suggests that a more invasive margin clearance in lesions with a pre-operative DCIS diagnosis might obviate the need for reintervention to obtain negative margins. On the other hand, it is not necessary to be surgically more invasive in larger lesions, deeply located or that are present in a certain quadrant, since there are no significant differences regarding the need for reintervention.

Cecum perforation in intestinal malrotation setting in a patient with chromosome 12p deletion syndrome: A case report.

INTRODUCTION: Intestinal malrotation results from failure of the normal gut rotation during embryological development. It is usually diagnosed in early childhood when it becomes symptomatic. Aetiology of intestinal malrotation has been scarcely addressed although relevant roles have been attributed to a few genes involved in gastrointestinal formation and association with certain syndromes has been suggested. PRESENTATION OF CASE: We describe the case of a 23-year-old woman with 12p deletion syndrome who presented with clinical symptoms of occlusion to the emergency department. Analytically, an elevation of inflammatory parameters was confirmed and imaging revealed pneumoperitoneum originated on cecum perforation. The patient was submitted to surgery with favorable evolution. DISCUSSION: Clinical manifestation of intestinal malrotation is uncommon in the adult population but can have severe consequences if not diagnosed early. The abnormal positioning of the duodenojejunal loop compressed by Ladd's bands, can lead to obstruction and ischemia. Surgery via Ladd's procedure commonly applies and elective treatment may prevent added morbidity. Intestinal malrotation has been associated to certain syndromes but no prior association to chromosome 12p deletion has been described. Occlusion in a patient with 12p chromosome deletion should raise prompt suspicion for intestinal malrotation. Moreover, diagnosis of 12p chromosome deletion should increase attention towards gastrointestinal changes since elective surgery may diminish morbidity. CONCLUSION: Intestinal malrotation results from abnormal embryological rotation of the midgut and is associated with certain syndromes. This paper firstly associates intestinal malrotation to chromosome 12p deletion. The possibility to address it electively may prevent morbidity in patients with this syndrome.

P-cadherin overexpression is an indicator of clinical outcome in invasive breast carcinomas and is associated with CDH3 promoter hypomethylation.

PURPOSE: P-cadherin overexpression has been reported in breast carcinomas, where it was associated with proliferative high-grade histological tumors. This study aimed to analyze P-cadherin expression in invasive breast cancer and to correlate it with tumor markers, pathologic features, and patient survival. Another purpose was to evaluate the P-cadherin promoter methylation pattern as the molecular mechanism underlying this gene regulation. EXPERIMENTAL DESIGN: Using a series of invasive breast carcinomas, P-cadherin expression was evaluated and correlated with histologic grade, estrogen receptor, MIB-1, and p53 and c-erbB-2 expression. In order to assess whether P-cadherin expression was associated with changes in CDH3 promoter methylation, we studied the methylation status of a gene 5'-flanking region in these same carcinomas. This analysis was also done for normal tissue and for a breast cancer cell line treated with a demethylating agent. RESULTS: P-cadherin expression showed a strong correlation with high histologic grade, increased proliferation, c-erbB-2 and p53 expression, lack of estrogen receptor, and poor patient survival. This overexpression can be regulated by gene promoter methylation because the 5-Aza-2'-deoxycytidine treatment of MCF-7/AZ cells increased P-cadherin mRNA and protein levels. Additionally, we found that 71% of P-cadherin-negative cases showed promoter methylation, whereas 65% of positive ones were unmethylated (P = 0.005). The normal P-cadherin-negative breast epithelial cells showed consistent CDH3 promoter methylation. CONCLUSIONS: P-cadherin expression was strongly associated with tumor aggressiveness, being a good indicator of clinical outcome. Moreover, the aberrant expression of P-cadherin in breast cancer might be regulated by gene promoter hypomethylation.

Personality and well-being in adolescents.

Different profiles of the character dimensions of self-directedness, cooperativeness and self-transcendence result in different levels of wellbeing among adults. However, the influence of the multidimensional character profiles on adolescents' composite wellbeing remains unexplored. This study builds on previous studies with adults, and examines the linear and non-linear associations between the dimensions of the psychobiological model of personality and well-being in adolescents. Participated in this study 1540 adolescents (M = 15.44, SD = 1.731). Personality was assessed using the Temperament and Character Inventory (TCI). Well-being was evaluated in a composite perspective: satisfaction with social support, health-related quality of life, satisfaction with life and affect. Variable-centered and individual-centered analyses were performed. Self-directedness was strongly associated with all dimensions of affective and cognitive well-being regardless of the other two character traits. Cooperativeness was associated with non-affective well-being and with positive affect, but only when associated to elevation of Self-directedness and Self-transcendence. Self-Directedness and Cooperativeness explained 15.5% of the non-affective well-being variance. Self-Directedness and Self-Transcendence explained 10.4% of the variance in affective well-being. This study confirms the tendencies found in previous studies with adults from other societies, where each character dimension gives an independent contribution to well-being depending on the interactions with other Character dimensions. Also, this study highlights the importance of considering the non-linear influences of the character dimensions in understanding of adolescents' wellbeing. These results have strong implications for youth positive mental health promotion, including for school-based policies and practices.

Dynamic culturing of cartilage tissue: the significance of hydrostatic pressure.

Human articular cartilage functions under a wide range of mechanical loads in synovial joints, where hydrostatic pressure (HP) is the prevalent actuating force. We hypothesized that the formation of engineered cartilage can be augmented by applying such physiologic stimuli to chondrogenic cells or stem cells, cultured in hydrogels, using custom-designed HP bioreactors. To test this hypothesis, we investigated the effects of distinct HP regimens on cartilage formation in vitro by either human nasal chondrocytes (HNCs) or human adipose stem cells (hASCs) encapsulated in gellan gum (GG) hydrogels. To this end, we varied the frequency of low HP, by applying pulsatile hydrostatic pressure or a steady hydrostatic pressure load to HNC-GG constructs over a period of 3 weeks, and evaluated their effects on cartilage tissue-engineering outcomes. HNCs (10×10(6) cells/mL) were encapsulated in GG hydrogels (1.5%) and cultured in a chondrogenic medium under three regimens for 3 weeks: (1) 0.4 MPa Pulsatile HP; (2) 0.4 MPa Steady HP; and (3) Static. Subsequently, we applied the pulsatile regimen to hASC-GG constructs and varied the amplitude of loading, by generating both low (0.4 MPa) and physiologic (5 MPa) HP levels. hASCs (10×10(6) cells/mL) were encapsulated in GG hydrogels (1.5%) and cultured in a chondrogenic medium under three regimens for 4 weeks: (1) 0.4 MPa Pulsatile HP; (2) 5 MPa Pulsatile HP; and (3) Static. In the HNC study, the best tissue development was achieved by the pulsatile HP regimen, whereas in the hASC study, greater chondrogenic differentiation and matrix deposition were obtained for physiologic loading, as evidenced by gene expression of aggrecan, collagen type II, and sox-9; metachromatic staining of cartilage extracellular matrix; and immunolocalization of collagens. We thus propose that both HNCs and hASCs detect and respond to physical forces, thus resembling joint loading, by enhancing cartilage tissue development in a frequency- and amplitude-dependant manner.

Novel melt-processable chitosan-polybutylene succinate fibre scaffolds for cartilage tissue engineering.

Novel chitosan/polybutylene succinate fibre-based scaffolds (C-PBS) were seeded with bovine articular chondrocytes in order to assess their suitability for cartilage tissue engineering. Chondrocytes were seeded onto C-PBS scaffolds using spinner flasks under dynamic conditions, and cultured under orbital rotation for a total of 6 weeks. Non-woven polyglycolic acid (PGA) felts were used as reference materials. Tissue-engineered constructs were characterized by scanning electron microscopy (SEM), hematoxylin-eosin (H&E), toluidine blue and alcian blue staining, immunolocalization of collagen types I and II, and dimethylmethylene blue (DMB) assay for glycosaminoglycans (GAG) quantification at different time points. SEM showed the chondrocytes' typical morphology, with colonization at the surface and within the pores of the C-PBS scaffolds. These observations were supported by routine histology. Toluidine blue and alcian blue stains, as well as immunohistochemistry for collagen types I and II, provided qualitative information on the composition of the engineered extracellular matrix. More pronounced staining was observed for collagen type II than collagen type I. Similar results were observed with constructs engineered on PGA scaffolds. These also exhibited higher amounts of matrix glycosaminoglycans and presented a central region which contained fewer cells and little matrix, a feature that was not detected with C-PBS constructs.

Development of gellan gum-based microparticles/hydrogel matrices for application in the intervertebral disc regeneration.

Low back pain is one of the most reported medical conditions associated to intervertebral disc (IVD) degeneration. Nucleus pulposus (NP) is often regarded as the structure where IVD degeneration begins. Gellan gum (GG)-based hydrogels for acellular and cellular tissue engineering strategies have been developed for finding applications as NP substitutes. The innovative strategy is based on the reinforcement of the hydrogel matrix with biocompatible and biodegradable GG microparticles (MPs), which are expected to improve the mechanical properties, while allowing to tailor its degradation rate. In this study, several GG MP/hydrogel disc formulations were prepared by means of mixing high acyl GG (0.75% (w/v)) and low acyl GG (2% (w/v)) GG aqueous solutions at different ratios, namely, 75%:25% (v/v), 50%:50% (v/v), and 25%:75% (v/v), respectively. The GG MP size was measured using a stereo microscope, and their dispersion within the hydrogel matrix was evaluated by means of staining the MPs with Toluidine Blue-O. The developed GG MPs/hydrogel discs were physicochemically characterized by Fourier-transform infrared spectroscopy and (1)H-nuclear magnetic resonance spectroscopy. The swelling behavior and degradation rate were assessed by immersion in a phosphate buffer saline for 14 days. The morphology and mechanical behavior were investigated by scanning electron microscopy and dynamic mechanical analysis, respectively. The mechanical properties of the hydrogel disc were improved by mixing the gels with the MPs. In addition, the possible cytotoxicity of the leachables released by MPs/hydrogel discs was screened in vitro, using a mouse lung fibroblast cell line (L929 cells). To investigate the encapsulation efficacy of L929 cells into the GG MPs/hydrogel discs, cells were stained with DAPI blue/Texas Red-Phalloidin and observed by confocal microscopy, after 24, 48, and 72 h of culturing. A cell viability assay was also performed using Calcein AM staining. The cell culture studies demonstrated that MPs/hydrogel discs are noncytotoxic over L929 cells. It was also demonstrated that L929 cells can be successfully encapsulated into the GG MPs of different formulations, remaining viable after 72 h of culturing. This study showed that GG hydrogel matrices reinforced with cell-loaded MPs could be a candidate strategy for NP regeneration.

The effect of insulin-loaded chitosan particle-aggregated scaffolds in chondrogenic differentiation.

Osteochondral defect repair requires a tissue engineering approach that aims at mimicking the physiological properties and structure of two different tissues (cartilage and bone) using a scaffold-cell construct. One ideal approach would be to engineer in vitro a hybrid material using a single-cell source. For that purpose, the scaffold should be able to provide the adequate biochemical cues to promote the selective but simultaneous differentiation of both tissues. In this work, attention was paid primarily to the chondrogenic differentiation by focusing on the development of polymeric systems that provide biomolecules release to induce chondrogenic differentiation. For that, different formulations of insulin-loaded chitosan particle-aggregated scaffolds were developed as a potential model system for cartilage and osteochondral tissue engineering applications using insulin as a potent bioactive substance known to induce chondrogenic differentiation. The insulin encapsulation efficiency was shown to be high with values of 70.37 +/- 0.8%, 84.26 +/- 1.76%, and 87.23 +/- 1.58% for loadings of 0.05%, 0.5%, and 5%, respectively. The in vitro release profiles were assessed in physiological conditions mimicking the cell culture procedures and quantified by Micro-BCA protein assay. Different release profiles were obtained that showed to be dependent on the initial insulin-loading percentage. Further, the effect on prechondrogenic ATDC5 cells was investigated for periods up to 4 weeks by studying the influence of these release systems on cell morphology, DNA and glycosaminoglycan content, histology, and gene expression of collagen types I and II, Sox-9, and aggrecan assessed by real-time polymerase chain reaction. When compared with control conditions (unloaded scaffolds cultured with the standard chondrogenic-inducing medium), insulin-loaded scaffolds upregulated the Sox-9 and aggrecan expression after 4 weeks of culture. From the overall results, it is reasonable to conclude that the developed loaded scaffolds when seeded with ATDC5 can provide biochemical cues for chondrogenic differentiation. Among the tested formulations, the higher insulin-loaded system (5%) was the most effective in promoting chondrogenic differentiation.

Injectable gellan gum hydrogels with autologous cells for the treatment of rabbit articular cartilage defects.

In this work, the ability of gellan gum hydrogels coupled with autologous cells to regenerate rabbit full-thickness articular cartilage defects was tested. Five study groups were defined: (a) gellan gum with encapsulated chondrogenic predifferentiated rabbit adipose stem cells (ASC + GF); (b) gellan gum with encapsulated nonchondrogenic predifferentiated rabbit adipose stem cells (ASC); (c) gellan gum with encapsulated rabbit articular chondrocytes (AC) (standard control); (d) gellan gum alone (control); (e) empty defect (control). Full-thickness articular cartilage defects were created and the gellan gum constructs were injected and left for 8 weeks. The macroscopic aspect of the explants showed a progressive increase of similarity with the lateral native cartilage, stable integration at the defect site, more pronouncedly in the cell-loaded constructs. Tissue scoring showed that ASC + GF exhibited the best results regarding tissue quality progression. Alcian blue retrieved similar results with a better outcome for the cell-loaded constructs. Regarding real-time PCR analyses, ASC + GF had the best progression with an upregulation of collagen type II and aggrecan, and a downregulation of collagen type I. Gellan gum hydrogels combined with autologous cells constitute a promising approach for the treatment of articular cartilage defects, and adipose derived cells may constitute a valid alternative to currently used articular chondrocytes.

Modified Gellan Gum hydrogels with tunable physical and mechanical properties.

Gellan Gum (GG) has been recently proposed for tissue engineering applications. GG hydrogels are produced by physical crosslinking methods induced by temperature variation or by the presence of divalent cations. However, physical crosslinking methods may yield hydrogels that become weaker in physiological conditions due to the exchange of divalent cations by monovalent ones. Hence, this work presents a new class of GG hydrogels crosslinkable by both physical and chemical mechanisms. Methacrylate groups were incorporated in the GG chain, leading to the production of a methacrylated Gellan Gum (MeGG) hydrogel with highly tunable physical and mechanical properties. The chemical modification was confirmed by proton nuclear magnetic resonance (1H NMR) and Fourier transform infrared spectroscopy (FTIR-ATR). The mechanical properties of the developed hydrogel networks, with Young's modulus values between 0.15 and 148 kPa, showed to be tuned by the different crosslinking mechanisms used. The in vitro swelling kinetics and hydrolytic degradation rate were dependent on the crosslinking mechanisms used to form the hydrogels. Three-dimensional (3D) encapsulation of NIH-3T3 fibroblast cells in MeGG networks demonstrated in vitro biocompatibility confirmed by high cell survival. Given the highly tunable mechanical and degradation properties of MeGG, it may be applicable for a wide range of tissue engineering approaches.

Gellan gum injectable hydrogels for cartilage tissue engineering applications: in vitro studies and preliminary in vivo evaluation.

Gellan gum is a polysaccharide that we have previously proposed for applications in the cartilage tissue engineering field. In this work, gellan gum hydrogels were tested for their ability to be used as injectable systems using simple processing methods, able to deliver and maintain chondrocytes by in situ gelation, and support cell viability and production of extracellular matrix (ECM). Rheological measurements determined that the sol-gel transition occurred near the body temperature at 39 degrees C, upon temperature decrease, in approximately 20 s. Gellan gum discs shows a storage compression modulus of around 80 kPa at a frequency of 1 Hz by dynamic mechanical analysis. Human articular chondrocytes were encapsulated in the gels, cultured in vitro for total periods of 56 days, and analyzed for cell viability and ECM production. Calcein AM staining showed that cell kept viable after 14 days and the histological analysis and real-time quantitative polymerase chain reaction revealed that hyaline-like cartilage ECM was synthesized. Finally, the in vivo performance of the gellan gum hydrogels, in terms of induced inflammatory reaction and integration into the host tissue, was evaluated by subcutaneous implantation in Balb/c mice for 21 days. Histological analysis showed a residual fibrotic capsule at the end of the experiments. Dynamic mechanical analysis revealed that the gels were stable throughout the experiments while evidencing a tendency for decreasing mechanical properties, which was consistent with weight measurements. Altogether, the results demonstrate the adequacy of gellan gum hydrogels processed by simple methods for noninvasive injectable applications toward the formation of a functional cartilage tissue-engineered construct and originally report the preliminary response of a living organism to the subcutaneous implantation of the gellan gum hydrogels. These are the two novel features of this work.

Genipin-cross-linked collagen/chitosan biomimetic scaffolds for articular cartilage tissue engineering applications.

In this study, genipin-cross-linked collagen/chitosan biodegradable porous scaffolds were prepared for articular cartilage regeneration. The influence of chitosan amount and genipin concentration on the scaffolds physicochemical properties was evaluated. The morphologies of the scaffolds were characterized by scanning electron microscope (SEM) and cross-linking degree was investigated by ninhydrin assay. Additionally, the mechanical properties of the scaffolds were assessed under dynamic compression. To study the swelling ratio and the biostability of the collagen/chitosan scaffold, in vitro tests were also carried out by immersion of the scaffolds in PBS solution or digestion in collagenase, respectively. The results showed that the morphologies of the scaffolds underwent a fiber-like to a sheet-like structural transition by increasing chitosan amount. Genipin cross-linking remarkably changed the morphologies and pore sizes of the scaffolds when chitosan amount was less than 25%. Either by increasing the chitosan ratio or performing cross-linking treatment, the swelling ratio of the scaffolds can be tailored. The ninhydrin assay demonstrated that the addition of chitosan could obviously increase the cross-linking efficiency. The degradation studies indicated that genipin cross-linking can effectively enhance the biostability of the scaffolds. The biocompatibility of the scaffolds was evaluated by culturing rabbit chondrocytes in vitro. This study demonstrated that a good viability of the chondrocytes seeded on the scaffold was achieved. The SEM analysis has revealed that the chondrocytes adhered well to the surface of the scaffolds and contacted each other. These results suggest that the genipin-cross-linked collagen/chitosan matrix may be a promising formulation for articular cartilage scaffolding.

Development and characterization of a novel hybrid tissue engineering-based scaffold for spinal cord injury repair.

Spinal cord injury (SCI) represents a significant health and social problem, and therefore it is vital to develop novel strategies that can specifically target it. In this context, the objective of the present work was to develop a new range of three-dimensional (3D) tubular structures aimed at inducing the regeneration within SCI sites. Up to six different 3D tubular structures were initially developed by rapid prototyping: 3D bioplotting-based on a biodegradable blend of starch. These structures were then further complemented by injecting Gellan Gum, a polysaccharide-based hydrogel, in the central area of structures. The mechanical properties of these structures were assessed using dynamic mechanical analysis, under both dry and wet conditions, and their morphologies/porosities were analyzed using micro-computed tomography and scanning electron microscopy. Biological evaluation was carried out to determine their cytotoxicity, using both minimum essential medium (MEM) extraction and MTS tests, as well as by encapsulation of an oligodendrocyte-like cell (M03-13 cell line) within the hydrogel phase. The histomorphometric analysis showed a fully interconnected network of pores with porosity ranging from 70% to 85%. Scaffolds presented compressive modulus ranging from 17.4 to 62.0 MPa and 4.42 to 27.4 MPa under dry and wet conditions, respectively. Cytotoxicity assays revealed that the hybrid starch/poly-epsilon-caprolactone/Gellan Gum scaffolds were noncytotoxic, as they did not cause major alterations on cell morphology, proliferation, and metabolic viability. Moreover, preliminary cell encapsulation assays showed that the hybrid scaffolds could support the in vitro culture of oligodendrocyte-like cells. Finally, preliminary in vivo studies conducted in a hemisection rat SCI model revealed that the above-referred structures were well integrated within the injury and did not trigger chronic inflammatory processes. The results herein presented indicate that these 3D systems might be of use in future SCI regeneration approaches.

Assessment of the suitability of chitosan/polybutylene succinate scaffolds seeded with mouse mesenchymal progenitor cells for a cartilage tissue engineering approach.

In this work, scaffolds derived from a new biomaterial originated from the combination of a natural material and a synthetic material were tested for assessing their suitability for cartilage tissue engineering applications. In order to obtain a better outcome result in terms of scaffolds' overall properties, different blends of natural and synthetic materials were created. Chitosan and polybutylene succinate (C-PBS) 50/50 (wt%) were melt blended using a twin-screw extruder and processed into 5 x 5 x 5 mm scaffolds by compression moulding with salt leaching. Micro-computed tomography analysis calculated an average of 66.29% porosity and 92.78% interconnectivity degree for the presented scaffolds. The salt particles used ranged in size between 63 and 125 mum, retrieving an average pore size of 251.28 mum. Regarding the mechanical properties, the compressive modulus was of 1.73 +/- 0.4 MPa (E(sec) 1%). Cytotoxicity evaluation revealed that the leachables released by the developed porous structures were not harmful to the cells and hence were noncytotoxic. Direct contact assays were carried out using a mouse bone marrow-derived mesenchymal progenitor cell line (BMC9). Cells were seeded at a density of 5 x 10(5) cells/scaffold and allowed to grow for periods up to 3 weeks under chondrogenic differentiating conditions. Scanning electron microscopy analysis revealed that the cells were able to proliferate and colonize the scaffold structure, and MTS test demonstrated cell viability during the time of the experiment. Finally, Western blot performed for collagen type II, a natural cartilage extracellular matrix component, showed that this protein was being expressed by the end of 3 weeks, which seems to indicate that the BMC9 cells were being differentiated toward the chondrogenic pathway. These results indicate the adequacy of these newly developed C-PBS scaffolds for supporting cell growth and differentiation toward the chondrogenic pathway, suggesting that they should be considered for further studies in the cartilage tissue engineering field.

Adult stem cells in bone and cartilage tissue engineering.

The progressive increase in life expectancy within the last century has led to the appearance of novel health related problems, some of those within the musculoskeletal field. Among the latter, one can find diseases such as osteoporosis, rheumatoid arthritis and bone cancer, just to mention some of the most relevant. Other related problems are those that arise from serious injuries, often leading to non-recoverable critical size defects. The therapies currently used to treat this type of diseases/injuries are based on the use of pharmaceutical agents, auto/allotransplant and synthetic materials. However, such solutions present a number of inconveniences and therefore, there is a constant search for novel therapeutic solutions. The appearance of a novel field of science called Tissue engineering brought some hope for the solution of the above mentioned problems. In this field, it is believed that by combining a 3D porous template--scaffold--with an adequate cell population, with osteo or chondrogenic potential, it will be possible to develop bone and cartilage tissue equivalents that when implanted in vivo, could lead to the total regeneration of the affected area. This ideal cell population should have a series of properties, namely a high osteo and chondrogenic potential and at the same time, should be easily expandable and maintained in cultures for long periods of time. Due to its natural and intrinsic properties, stem cells are one of the best available cell types. However, after this sentence, the readers may ask, "Which Stem Cells?". During the last 10/15 years, the scientific community witnessed and reported the appearance of several sources of stem cells with both osteo and chondrogenic potential. Therefore, the present review intends to make an overview of data reported on different sources of adult stem cells (bone marrow, periosteum, adipose tissue, skeletal muscle and umbilical cord) for bone and cartilage regenerative medicine, namely those focusing on the differentiation potential of the latter as well as in vivo proof of concept of their applicability. Simultaneously novel aspects of adult stem cells biotechnology such as their immunogenic characteristics and cell expansion methodologies will also be put forward. The present review also points out on issues such as the bone and cartilage regenerative market, and gives a brief description on bone and cartilage bone biology, so the readers can have a true idea of the current state of the art, and how adult stem cells can be an added value to this field.