Uncovering the Optimal Molecular Characteristics of Hydrophobe-Containing Polypeptoids to Induce Liposome or Cell Membrane Fragmentation.

Cellular functions of membrane proteins are strongly coupled to their structures and aggregation states in the cellular membrane. Molecular agents that can induce the fragmentation of lipid membranes are highly sought after as they are potentially useful for extracting membrane proteins in their native lipid environment. Toward this goal, we investigated the fragmentation of synthetic liposome using hydrophobe-containing polypeptoids (HCPs), a class of facially amphiphilic pseudo-peptidic polymers. A series of HCPs with varying chain lengths and hydrophobicities have been designed and synthesized. The effects of polymer molecular characteristics on liposome fragmentation are systemically investigated by a combination of light scattering (SLS/DLS) and transmission electron microscopy (cryo-TEM and negative stained TEM) methods. We demonstrate that HCPs with a sufficient chain length (DPn ≈ 100) and intermediate hydrophobicity (PNDG mol % = 27%) can most effectively induce the fragmentation of liposomes into colloidally stable nanoscale HCP-lipid complexes owing to the high density of local hydrophobic contact between the HCP polymers and lipid membranes. The HCPs can also effectively induce the fragmentation of bacterial lipid-derived liposomes and erythrocyte ghost cells (i.e., empty erythrocytes) to form nanostructures, highlighting the potential of HCPs as novel macromolecular surfactants toward the application of membrane protein extraction.

Spontaneous Formation of Stable Vesicles and Vesicle Gels in Polar Organic Solvents.

The self-assembly of lipids into nanoscale vesicles (liposomes) is routinely accomplished in water. However, reports of similar vesicles in polar organic solvents like glycerol, formamide, and ethylene glycol (EG) are scarce. Here, we demonstrate the formation of nanoscale vesicles in glycerol, formamide, and EG using the common phospholipid lecithin (derived from soy). The samples we study are simple binary mixtures of lecithin and the solvent, with no additional cosurfactants or salt. Lecithin dissolves readily in the solvents and spontaneously gives rise to viscous fluids at low lipid concentrations (∼2-4%), with structures ∼200 nm detected by dynamic light scattering. At higher concentrations (>10%), lecithin forms clear gels that are strongly birefringent at rest. Dynamic rheology confirms the elastic response of gels, with their elastic modulus being ∼20 Pa at ∼10% lipid. Images from cryo-scanning electron microscopy (cryo-SEM) indicate that concentrated samples are "vesicle gels," where multilamellar vesicles (MLVs, also called "onions"), with diameters between 50 and 600 nm, are close-packed across the sample volume. This structure can explain both the elastic rheology as well as the static birefringence of the samples. The discovery of vesicles and vesicle gels in polar solvents widens the scope of systems that can be created by self-assembly. Interestingly, it is much easier to form vesicles in polar solvents than in water, and the former are stable indefinitely, whereas the latter tend to aggregate or coalesce over time. The stability is attributed to refractive index-matching between lipid bilayers and the solvents, i.e., these vesicles are relatively "invisible" and thus experience only weak attractions. The ability to use lipids (which are "green" or eco-friendly molecules derived from renewable natural sources) to thicken and form gels in polar solvents could also prove useful in a variety of areas, including cosmetics, pharmaceuticals, and lubricants.

Amphiphilic Polypeptoids Rupture Vesicle Bilayers To Form Peptoid-Lipid Fragments Effective in Enhancing Hydrophobic Drug Delivery.

Peptoids are highly biocompatible pseudopeptidic polyglycines with designable substituents on the nitrogen atoms. The therapeutic and drug-carrying potential of these materials requires a fundamental understanding of their interactions with lipid bilayers. In this work, we use amphiphilic polypeptoids with up to 100 monomeric units where a significant fraction (26%) of the nitrogen atoms are functionalized with decyl groups (hydrophobes) that insert into the lipid bilayer through the hydrophobic effect. These hydrophobically modified polypeptoids (HMPs) insert their hydrophobes into lipid bilayers creating instabilities that lead to the rupture of vesicles. At low HMP concentrations, such rupture leads to the creation of large fragments which remarkably anchor to intact vesicles through the hydrophobic effect. At high HMP concentrations, all vesicles rupture to smaller HMP-lipid fragments of the order of 10 nm. We show that the technique for such nanoscale polymer-lipid fragments can be exploited to sustain highly hydrophobic drug species in solution. Using the kinase inhibitor, Sorafenib as a model drug, it is shown that HMP-lipid fragments containing the drug can efficiently enter a hepatocellular carcinoma cell line (Huh 7.5), indicating the use of such fragments as drug delivery nanocarriers.

Tunable Friction Through Stimuli Responsive Hybrid Carbon Microspheres.

We explore the use of poly(N-isopropylacrylamide) (PNIPAm)-grafted carbon microspheres (CM) dispersed in water as a stimulus-responsive lubricant. A critical concentration between 3 and 5 mg/mL of PNIPAm-grafted CM is needed to achieve low friction (coefficient of friction ∼ 0.04) at room temperature between borosilicate and silicon surfaces. An increase in the temperature of the system above the lower critical solution temperature (LCST) causes the aggregation of PNIPAm-grafted CM which leads to an increase in friction forces. The process is not immediately reversible unless the lubricant is sonicated so as to redisperse the aggregates. This work provides insight into the rolling friction mechanism and demonstrates the importance of particle singlets in achieving effective lubrication through a rolling mechanism.

Amphiphilic Polypeptoids Serve as the Connective Glue to Transform Liposomes into Multilamellar Structures with Closely Spaced Bilayers.

We report the ability of hydrophobically modified polypeptoids (HMPs), which are amphiphilic pseudopeptidic macromolecules, to connect across lipid bilayers and thus form layered structures on liposomes. The HMPs are obtained by attaching hydrophobic decyl groups at random points along the polypeptoid backbone. Although native polypeptoids (with no hydrophobes) have no effect on liposomal structure, the HMPs remodel the unilamellar liposomes into structures with comparable diameters but with multiple concentric bilayers. The transition from single-bilayer to multiple-bilayer structures is revealed by small-angle neutron scattering (SANS) and cryo-transmission electron microscopy (cryo-TEM). The spacing between bilayers is found to be relatively uniform at ∼6.7 nm. We suggest that the amphiphilic nature of the HMPs explains the formation of multibilayered liposomes; i.e., the HMPs insert their hydrophobic tails into adjacent bilayers and thereby serve as the connective glue between bilayers. At higher HMP concentrations, the liposomes are entirely disrupted into much smaller micellelike structures through extensive hydrophobe insertion. Interestingly, these small structures can reattach to fresh unilamellar liposomes and self-assemble to form new two-bilayer liposomes. The two-bilayer liposomes in our study are reminiscent of two-bilayer organelles such as the nucleus in eukaryotic cells. The observations have significance in designing new nanoscale drug delivery carriers with multiple drugs on separate lipid bilayers and extending liposome circulation times with entirely biocompatible materials.

Transformation of Lipid Vesicles into Micelles by Adding Nonionic Surfactants: Elucidating the Structural Pathway and the Intermediate Structures.

The phospholipid lecithin (L) and the nonionic surfactant Tween 80 (T) are used together in various contexts, including in drug delivery and oil spill remediation. There is hence a need to elucidate the nanostructures in LT mixtures, which is the focus of this paper. We study these mixtures using cryogenic transmission electron microscopy (cryo-TEM), coupled with dynamic light scattering and small-angle neutron scattering. As the concentration of Tween 80 is increased, the vesicles formed by lecithin are transformed into spherical micelles. We identify bicelles (i.e., disc-like micelles) as well as cylindrical micelles as the key stable nanostructures formed at intermediate L/T ratios. The bicelles have diameters ∼13-26 nm, and the bicelle size decreases as the Tween 80 content increases. We propose that the lecithin lipids form the body of the discs, while the Tween 80 surfactants occupy the rims. This hypothesis is consistent with geometric arguments because lecithin is double-tailed and favors minimal curvature, whereas the single-tailed Tween 80 molecules prefer curved interfaces. In the case of cylindrical micelles, cryo-TEM reveals that the micelles are short (length < 22 nm) and flexible. We are able to directly visualize the microstructure of the aggregates formed by lecithin-Tween 80 mixtures, thereby enhancing the understanding of morphological changes in the lecithin-Tween 80 system.

Hydrophobe Containing Polypeptoids Complex with Lipids and Induce Fusogenesis of Lipid Vesicles.

The hydrophobic effect of alkyl group insertion into phospholipid bilayers is exploited in modifying and modulating vesicle structure. We show that amphiphilic polypeptoids (peptide mimics) with n-decyl side chains, which we term as hydrophobe-containing polypeptoids (HCPs), can insert the alkyl hydrophobes into the membrane bilayer of phospholipid-based vesicles. Such insertion leads to disruption of the liposomes and the formation of HCP-lipid complexes that are colloidally stable in aqueous solution. Interestingly, when these complexes are added to fresh liposomes, remnant uncomplexed hydrophobes (the n-decyl groups) bridge liposomes and fuse them. The fusion leads to the engulfing of liposomes and the formation of multilayered vesicles. The morphology of the liposome system can be changed from stopping fusion and forming clustered vesicles to the continued formation of multilayered liposomes simply by controlling the amount of the HCP-lipid complex added. The entire procedure occurs in aqueous systems without the addition of any other solvents. There are several implications to these observations including the biological relevance of mimicking fusogenic proteins such as the SNARE proteins and the development of new drug delivery technologies to impact delivery to cell organelles.

Clusters of Nanoscale Liposomes Modulate the Release of Encapsulated Species and Mimic the Compartmentalization Intrinsic in Cell Structures.

We report the ability to place a high concentration of liposomes in a confined volume as a multicompartment cluster that mimics biological cells and allows for the modulation of release of encapsulated species. The formation of these coated multicompartmental structures is achieved by first binding liposomes into clusters before encapsulating them within a two-dimensional metal-organic framework composed of tannic acid coordinated with a metal ion. The essential feature is a molecularly thin skin over a ssystem of clustered liposomes in a pouch. The structural features of these pouches are revealed by small-angle scattering and electron microscopy. Through cryogenic electron microscopy, clusters with intact liposomes are observed that appear to be encapsulated within a pouch. Small-angle X-ray scattering shows the emergence of a relatively weak Bragg peak at q = 0.125 Å-1, possibly indicating the attachment of the bilayers of adjacent liposomes. The metal-phenolic network (MPN) forms a nanosized conformal coating around liposome clusters, resulting in the reduced release rate of the encapsulated rhodamine B dye. We further show the possibility of communication between the adjacent nanocompartments in the cluster by demonstrating enhanced energy transfer using fluorescence resonance energy transfer (FRET) experiments where the lipophilic donor dye 3,3'-dioctadecyloxacarbocyanine perchlorate (DiO) incorporated within one liposomal compartment transfers energy upon excitation to the lipophilic acceptor dye 1,1'-dioctadecyl-3,3,3',3'-tetramethylindocarbocyanine perchlorate (DiI) in a neighboring liposomal compartment due to their close proximity within the multicompartmental cluster. These observations have significance in adapting these multicompartmental structures that mimic biological cells for cascade reactions and as new depot drug delivery systems.

Investigation of Amphiphilic Polypeptoid-Functionalized Halloysite Nanotubes as Emulsion Stabilizer for Oil Spill Remediation.

Halloysite nanotubes (HNTs), naturally occurring and environmental benign clay nanoparticles, have been successfully functionalized with amphiphilic polypeptoid polymers by surface-initiated polymerization methods and investigated as emulsion stabilizers toward oil spill remediation. The hydrophilicity and lipophilicity balance (HLB) of the grafted polypeptoids was shown to affect the wettability of functionalized HNTs and their performance as stabilizers for oil-in-water emulsions. The functionalized HNTs having relatively high hydrophobic content (HLB = 12.0-15.0) afforded the most stable oil-in-water emulsions containing the smallest oil droplet sizes. This has been attributed to the augmented interfacial activities of polypeptoid-functionalized HNTs, resulting in more effective reduction of interfacial tension, enhancement of thermodynamic propensity of the HNT particles to partition at the oil-water interface, and increased emulsion viscosity relative to the pristine HNTs. Cell culture studies have revealed that polypeptoid-functionalized HNTs are noncytotoxic toward Alcanivorax borkumensis, a dominant alkane degrading bacterium found in the ocean after oil spill. Notably, the functionalized HNTs with higher hydrophobic polypeptoid content (HLB = 12.0-14.3) were shown to induce more cell proliferation than either pristine HNTs or those functionalized with less hydrophobic polypeptoids. It was postulated that the functionalized HNTs with higher hydrophobic polypeptoid content may promote the bacterial proliferation by providing larger oil-water interfacial area and better anchoring of bacteria at the interface.

Bacterial proliferation on clay nanotube Pickering emulsions for oil spill bioremediation.

Halloysites (tubular aluminosilicate) are introduced as inexpensive natural nanoparticles that form and stabilize oil-water emulsions. Pickering emulsification can proceed with energies low enough to be afforded by ocean turbulence and the stability of droplets extends over more than a week. The oil/water interface is shown to be roughened and bacteria, which are added for oil degradation, are better attached to such oil droplets than to droplets without halloysites. The metabolic activity of Alcanivorax borkumensis, alkanotrophic bacteria widely distributed in marine environments, is enhanced by halloysite addition. A halloysite-based dispersant system is therefore environmentally friendly and promising for further optimization. The key elements of the described formulations are natural clay nanotubes, which are abundantly available in thousands of tons, thus making this technology scalable for environmental remediation.

Microstructural characteristics of surfactant assembly into a gel-like mesophase for application as an oil spill dispersant.

HYPOTHESIS: Polyoxyethylene (20) sorbitan monooleate (Tween 80) can be incorporated into the gel-like phase formed by L-α-phosphatidylcholine (PC) and dioctyl sulfosuccinate sodium salt (DOSS) for potential application as a gel-like dispersant for oil spill treatment. Such gel-like dispersants offer advantages over existing liquid dispersants for mitigating oil spill impacts. EXPERIMENTS: Crude oil-in-saline water emulsions stabilized by the surfactant system were characterized by optical microscopy and turbidity measurements while interfacial tensions were measured by the spinning drop and pendant drop techniques. The microstructure of the gel-like surfactant mesophase was elucidated using small angle neutron scattering (SANS), cryo scanning electron microscopy (cryo-SEM), and 31P nuclear magnetic resonance (NMR) spectroscopy. FINDINGS: The gel-like phase consisting of PC, DOSS and Tween 80 is positively buoyant on water and breaks down on contact with floating crude oil layers to release the surfactant components. The surfactant mixture effectively lowers the crude oil-saline water interfacial tension to the 10-2 mN/m range, producing stable crude oil-in-saline water emulsions with an average droplet size of about 7.81 µm. Analysis of SANS, cryo-SEM and NMR spectroscopy data reveals that the gel-like mesophase has a lamellar microstructure that transition from rolled lamellar sheets to onion-like, multilamellar structures with increasing Tween 80 content.