Fabrication of controlled-release polymeric microneedles containing progesterone-loaded self-microemulsions for transdermal delivery.

Progesterone (PG) has been approved for hormone replacement therapy to mitigate the risk of endometrial carcinoma. However, there has been a lack of success in oral PG due to its rapid degradation. Transdermal PG has advantages but lacks efficacy due to its poor solubility (Log p = 3.9). Therefore, this study aimed to evaluate how combining self-microemulsifying drug delivery systems (SMEDDS) and polymeric microneedles (MNs) could improve the transdermal delivery of PG in a controlled-release manner. Among PG-SMEDDS, PG-SME5 was selected for its desirable properties and stability. The two-layer polymeric MNs formulation incorporating PG-SME5 (PG-SMEDDS-tMNs) was formulated from aqueous blends of polymers as a first layer and 20% PCL as a second layer. It successfully penetrated neonatal porcine skin with the dissolution of the first layer observed within 15 min after application. In vitro skin permeation revealed that the percentage of PG which permeated the skin over 82 h using PG-SMEDDS-tMNs was higher than a PG-suspension and PG-SMEDDS. The Higuchi kinetic showed controlled release over 15 days of PG from PG-SMEDDS-tMNs. These studies suggested that incorporating PG-SMEDDS into controlled-release two-layer polymeric MNs could be a promising approach for improving the transdermal delivery of PG.

Potential Lipolytic Effect of Panduratin A Loaded Microspicule Serum as a Transdermal Delivery Approach for Subcutaneous Fat Reduction.

Boesenbergia rotunda (L.) Mansf contained a potent anti-obesity agent. The objectives of this study were to investigate the anti-adipogenesis and lipolysis effects of panduratin A from B. rotunda extract and develop extract-loaded lipolytic body microspicule (MS) serum. Panduratin A that was separated from the ethanolic extract of B. rotunda in fraction 3 (BP-3) were studied the bioactivity of 3T3-L1 preadipocyte cells. The extract-loaded MS serum was formulated and evaluated for safety and efficacy. The BP-3 extract containing panduratin A at 0.29 g per g of the extract was not toxic to the cells at concentrations lower than 10 µg/mL, and the antiadipogenesis and lipolysis effects of the BP-3 extract were strong at 10 µg/mL. To deliver bioactive panduratin A into and through the skin, MS serum was successfully formulated. Application of BP-3 extract-loaded MS serum to the human thigh for 14 d reduced the thigh circumference and increased skin hydration and firmness. Although the skin erythema was increased, no severe redness or pain was found. In conclusion, BP-3 extract acts as a potent bioactive compound to inhibit adipocyte cells, and the antiadipogenesis and lipolysis effects of BP-3 extract in MS serum might play an important role as a potential lipolytic body product for reducing human subcutaneous fat mass.

Development of invaethosomes and invaflexosomes for dermal delivery of clotrimazole: optimization, characterization and antifungal activity.

The objective of this study was to develop novel invaethosomes (I-ETS) and invaflexosomes (I-FXS) to enhance the dermal delivery of clotrimazole (CZ). Twenty model CZ-loaded I-ETS and I-FXS formulations were created according to a face-centered central composite experimental design. CZ-loaded vesicle formulations containing a constant concentration of 0.025% w/v CZ and various amounts of ethanol, d-limonene, and polysorbate 20 as penetration enhancers were prepared using the thin film hydration method. The physicochemical characteristics, skin permeability, and antifungal activity were characterized. The skin permeability of the experimental CZ-loaded I-ETS/I-FXS was significantly higher than that of conventional ethosomes, flexosomes, and the commercial product (1% w/w CZ cream). The mechanism of action was confirmed to be skin penetration of low ethanol base vesicles through the disruption of the skin microstructure. The optimal I-ETS in vitro antifungal activity against C. albicans differed significantly from that of ETS and the commercial cream (control). The response surface methodology predicted by Design Expert® was helpful in understanding the complicated relationship between the causal factors and the response variables of the 0.025% w/v CZ-loaded I-ETS/I-FXS formulation. Based on the available information, double vesicles seem to be promising versatile carriers for dermal drug delivery of CZ.

Optimization of In Situ Gel-Forming Chlorhexidine-Encapsulated Polymeric Nanoparticles Using Design of Experiment for Periodontitis.

Periodontitis is a chronic inflammatory disease of the gums caused by pathogenic microorganisms damaging and destroying periodontal tissues. Chlorhexidine digluconate (CHX) is a commonly used antimicrobial agent for the treatment of periodontitis. However, it has many drawbacks, such as toxicity due to the high dosage required, low prolonged release, and low adhesion in the periodontal pocket. The objective of this study was to develop and optimize CHX-encapsulated polymeric nanoparticles (NPs) loaded into in situ gel-forming (ISGF) using design of experiment (DoE) to improve the treatment of periodontitis and overcome these limitations. CHX-NPs were optimized from 0.046%w/v chitosan, 0.05%w/w gelatin, and 0.25%w/w CHX. After that, the optimized of CHX-NPs was loaded into a thermosensitive ISGF, which was a mixture of 15%w/v Poloxamer 407 and 1% hydroxypropyl methylcellulose (HPMC). The optimized CHX-NPs, loaded into ISGF, was evaluated by measuring gelling temperature and time, pH, viscosity, compatibility, in vitro drug release, antibacterial activity, cytotoxicity, and stability. The results showed that the size, PDI, and zeta potential of optimized CHX-NPs were 53.07±10.17 nm, 0.36±0.02, and 27.63±4.16 mV, respectively. Moreover, the optimized ISGF loading CHX-NPs showed a gelling temperature at 34.3±1.2°C within 120.00±17.32 s with a pH value of 4.06. The viscosity of the formulations at 4°C was 54.33±0.99 cP. The DSC and FTIR showed no interaction between ingredients. The optimal formulations showed a prolonged release of up to 7 days while providing potential antibacterial activity and were safe for normal gingival fibroblast cells. Moreover, the formulations had high stability at 4°C and 25°C for 3 months. In conclusion, the study achieved the successful development of ISGF loading CHX-NPs formulations for effectiveness use in periodontal treatment.

Rapid Microwave-Assisted Synthesis of pH-Sensitive Carbon-Based Nanoparticles for the Controlled Release of Doxorubicin to Cancer Cells.

Carbon-based nanoparticles (CNPs) are a new type of interesting nanomaterials applied in various pharmaceutical fields due to their outstanding biocompatible properties. Novel pH-sensitive CNPs were rapidly synthesized within 1 min by microwave-assisted technique for doxorubicin (DOX) delivery into five cancer cell lines, including breast cancer (BT-474 and MDA-MB-231 cell lines), colon cancer (HCT and HT29 cell lines), and cervical cancer (HeLa cell lines). CNPs and DOX-loaded CNPs (CNPs-DOX) had nano-size of 11.66 ± 2.32 nm and 43.24 ± 13.25 nm, respectively. DOX could be self-assembled with CNPs in phosphate buffer solution at pH 7.4 through electrostatic interaction, exhibiting high loading efficiency at 85.82%. The release of DOX from CNPs-DOX at pH 5.0, often observed in the tumor, was nearly two times greater than the release at physiological condition pH 7.4. Furthermore, the anticancer activity of CNPs-DOX was significantly enhanced compared to free DOX in five cancer cell lines. CNPs-DOX could induce cell death through apoptosis induction in MDA-MB-231 cells. The findings revealed that CNPs-DOX exhibited a promising pH-sensitive nano-system as a drug delivery carrier for cancer treatment.

The Andrographolide Analogue 3A.1 Synergizes with Taxane Derivatives in Aggressive Metastatic Prostate Cancers by Upregulation of Heat Shock Proteins and Downregulation of MAT2A-Mediated Cell Migration and Invasion.

Conventional treatment with taxanes (docetaxel-DTX or cabazitaxel-CBZ) increases the survival rates of patients with aggressive metastatic castration-resistant prostate cancer (mCRPC); however, most patients acquire resistance to taxanes. The andrographolide analog, 19-tert-butyldiphenylsilyl-8,7-epoxy andrographolide (3A.1), has shown anticancer activity against various cancers. In this study, we investigated the effect of 3A.1 alone and in combination with DTX/CBZ against mCRPC and their mechanism of action. Exposure to 3A.1 alone exhibited a dose- and time-dependent antitumor activity in mCRPC. Chou-Talalay's combination index (CI) values of all 3A.1 + TX combinations were less than 0.5, indicating synergism. Co-treatment of 3A.1 with TX reduced the required dose of DTX and CBZ (P < 0.05). Caspase assay (apoptosis) results concurred with in vitro cytotoxicity data. RNA sequencing (RNAseq), followed by ingenuity pathway analysis (IPA), identified that upregulation of heat-shock proteins (Hsp70, Hsp40, Hsp27, and Hsp90) and downregulation of MAT2A as the key player for 3A.1 response. Furthermore, the top treatment-induced differentially expressed genes (DEGs) belong to DNA damage, cell migration, hypoxia, autophagy (MMP1, MMP9, HIF-1α, Bag-3, H2AX, HMOX1, PSRC1), and cancer progression pathways. Most importantly, top downregulated DEG MAT2A has earlier been shown to be involved in cell migration and invasion. Furthermore, using in silico analysis on the Cancer Genome Atlas (TCGA) database, this study found that MAT2A and highly co-expressed (r > 0.7) genes, TRA2B and SF1, were associated with worse Gleason score and nodal metastasis status in prostate adenocarcinoma patients (PRAD-TCGA). Immunoblotting, comet, and migration assays corroborated these findings. These results suggest that 3A.1 may be useful in increasing the anticancer efficacy of taxanes to treat aggressive PCa. SIGNIFICANCE STATEMENT: The andrographolide analogue, 19-tert-butyldiphenylsilyl-8,7-epoxy andrographolide (3A.1), showed anticancer activity against metastatic castration-resistant and neuroendocrine variant prostate cancers (mCRPC/NEPC). Additionally, 3A.1 exhibited synergistic anticancer effect in combination with standard chemotherapy drugs docetaxel and cabazitaxel in mCRPC/NEPC. Post-treatment gene expression studies revealed that heat shock proteins (Hsp70, Hsp40, Hsp27, and Hsp90) and MAT2A are important in the mechanism of 3A.1 action and drug response. Furthermore, DNA damage, cell migration, hypoxia, and autophagy were crucial pathways for the anticancer activity of 3A.1.

Serum Compatible Spermine-Based Cationic Lipids with Nonidentical Hydrocarbon Tails Mediate High Transfection Efficiency.

Cationic lipids are widely used as nonviral synthetic vectors for gene delivery as a safer alternative to viral vectors. In this work, a library of L-shaped spermine-based cationic lipids with identical and nonidentical hydrophobic chains having variable carbon lengths (from C10 to C18) was designed and synthesized. These lipids were characterized and the structure-activity relationships of these compounds were determined for DNA binding and transfection ability when formulated as cationic liposomes. The liposomes were then used successfully for the transfection of HEK293T, HeLa, PC3, H460, HepG2, SH-SY5Y and Calu'3 cell lines. The transfection efficiency of lipids with nonidentical hydrocarbon chains was greater than the identical analogue. These reagents exhibited superior efficiency to the commercial reagent, Lipofectamine3000, under both serum-free and 10-40 % serum conditions in HEK293T, HeLa and H460 cell lines. The lipids were not toxic to the tested cell line. The results suggest that L-shaped spermine-based cationic lipids with nonidentical hydrocarbon tails could serve as efficient and safe nonviral vector gene carriers in further in vivo studies.

Mucoadhesive chitosan and thiolated chitosan nanoparticles containing alpha mangostin for possible Colon-targeted delivery.

α-Mangostin-loaded mucoadhesive nanoparticles (NPs) were prepared for colon-targeted drug delivery against colorectal cancer cells using pH-dependent composite mucoadhesive NPs. Chitosan (CS) and thiolated chitosan (TCS) were used to form the NPs, following by genipin (GP) crosslinking and the surface modification by Eudragit® L100 (L100). The particle size, morphologies and characteristics of NPs were observed. The α-mangostin loading and release patterns were investigated. In vitro mucoadhesive properties were examined by the wash-off method. In addition, the anti-tumour activity was tested on colorectal cancer cells. The results showed that NPs were slightly oblong in shape with particle size ranging between 300 and 900 nm. The small size of NPs was found with TCS and larger NPs were observed by GP and L100 process. However, GP and L100 provided an increase in α-mangostin loading, limited the release of α-mangostin in the upper gastrointestinal tract, and enhanced α-mangostin delivery to the colon. The TCS-based NPs with GP and L100 exhibited strong mucoadhesion to colon mucosa, more than uncoated-NPs and CS-based NPs. Moreover, NPs exhibited the anti-tumour activity. Therefore, the mucoadhesive TCS-based NPs could be a promising candidate for a controlled-release drug delivery system of α-mangostin to the colon.

Design and Optimization of 3D-Printed Gastroretentive Floating Devices by Central Composite Design.

This study aimed to optimize the size of capsule-shaped 3D-printed devices (CPD) using an experimental design by the response surface methodology to provide a gastroretentive drug delivery system (GRDDS) with optimal floating time. The CPD was fabricated using a fused deposition modeling (FDM) 3D printer. The central composite design was employed for the optimization of the devices. The morphology of the CPD was observed using a digital microscope and scanning electron microscope (SEM). The in vitro floating time and drug release were evaluated using a USP dissolution apparatus II. Appropriate total floating time (TFT) of the devices (more than 3 h) was obtained with the device's body, cap, and bottom thickness of 1.2, 1.8, and 2.9 mm, respectively. The release kinetics of the drug from the devices fitted well with zero-order kinetics. In conclusion, the optimization of CPD for GRDDS using the experimental design provided the devices with desirable floating time and ideal drug release characteristics.

Catechol-Functionalized Alginate Nanoparticles as Mucoadhesive Carriers for Intravesical Chemotherapy.

This research aimed to synthesize and evaluate mucoadhesive catechol-functionalized alginate (Cat-Alg) nanoparticles (NPs) for bladder cancer. Cat-Alg was synthesized using coupling chemistry, and the structure was verified using NMR and FT-IR. Cat-Alg NPs were generated by ionic gelation between the synthesized Cat-Alg and calcium chloride. Garcinia mangostana L. extract (GM extract) was entrapped into the NPs during particle formation. The physical characteristics, mucoadhesive properties, drug loading and release, cellular uptake, and anticancer activity of the GM extract-loaded NPs were investigated. The Cat-Alg NPs were spherical with sizes in the range of 155-186 nm. The slightly negative surface charge of the NPs provided them with excellent stability. The Cat-Alg NPs could be retained on a porcine bladder mucosa to a greater extent compared with unmodified Alg NPs. High loading efficiency (71.6%) and loading capacity (292 µg/mg) of GM extract in the NPs were achieved, and a constant release of GM extract was obtained for up to 8 h with zero-order kinetics. Moreover, the GM extract-loaded NPs were deposited in bladder tissue and accumulated in MB49 cells at a higher rate compared with GM extract suspension. In addition, the NPs could kill a mouse urothelial carcinoma cell line with low IC50. Therefore, these NPs have the potential to be a mucoadhesive drug delivery system for bladder cancer treatment. However, additional in vivo investigations are needed for clinical application in cancer treatment. Graphical abstract.

Influence of nanofiber alignment on the release of a water-soluble drug from cellulose acetate nanofibers.

Cellulose acetate nanofibers with different degrees of alignment (randomly aligned (RA), partially aligned (PA), and highly aligned (HA)) were produced using an electrospinning technique. The different degrees of alignment were obtained by adjusting the rotation speed of the collector. Alpha-arbutin (3% w/w) employed as a model water-soluble compound was incorporated into the nanofibers during the fabrication process. The drug release characteristics were investigated using the nanofiber mats with the same size and weight. The prepared nanofibers with different degrees of alignment showed similar physical characteristics, including the fiber diameter, drug loading efficiency and capacity, and molecular form of the drug in the fibers. Interestingly, alpha-arbutin was released from HA nanofibers at a significantly faster rate than the PA and RA nanofibers. Eighty percent of the drug was released into the medium in 1.7, 4.2, and 9.4 min for HA, PA, and RA nanofibers, respectively. The orientation of nanofibers played a crucial role in governing the drug release, probably by creating network meshes with different degrees of entanglement, affecting the diffusion of drug to the external medium. Consequently, this approach can be used as a simple means of achieving immediate-release or fast-acting characteristics of cellulose-based formulations containing a water-soluble drug.

Development of Sponge Microspicule Cream as a Transdermal Delivery System for Protein and Growth Factors from Deer Antler Velvet Extract.

Sponge spicules are needle-like structures and used for dermabrasive treatment of the skin. This research aimed to develop an effective delivery system by using sponge spicules for enhancing skin permeation of bioactive proteins and growth factors from deer antler velvet (DAV). DAV was extracted by sonication and bioactivity studies were evaluated. The size of microspicules (MSs) was reduced and mixed with DAV extract cream. In vitro skin permeation was analyzed by using bovine serum albumin-fluorescein isothiocyanate conjugate (BSA-FITC) as a model macromolecular compound. For in vivo study, DAV extract formulations were applied on the skin of healthy humans, and effects were evaluated. Results showed that DAV extract containing proteins and growth factors increased the proliferation and migration of skin fibroblast cells. This extract was homogeneously mixed with spicule cream. Without blending, MS was 11.89 µm wide and 176.77 µm long; blending time exhibited short and broken MSs (MBs) for short blending (30 s) and fine powder (MF) for long blending (10 min). MS cream showed the highest permeation of BSA-FITC through the skin (2.26-fold enhancement), but it resulted in skin irritation. Therefore, MB cream that increased the permeation of BSA-FITC by 1.94-fold was not significantly different from MS formulations chosen for in vivo study. Applying DAV-containing MB cream on the skin for 14 d decreased the melanin content and erythema value but increased elasticity and hydration. Therefore, the MB-containing cream can enhance the macromolecule delivery through the skin, improve the skin properties, and avoid skin irritation.

Effects of silymarin-loaded amphiphilic chitosan polymeric micelles on the renal toxicity and anticancer activity of cisplatin.

This research aimed to evaluate the effects of silymarin (SM)-loaded polymeric micelles (PMs) on the renal toxicity and anticancer activity of cisplatin. Amphiphilic chitosan derivatives were employed to develop SM-loaded PMs. The permeation across an intestinal membrane, cytotoxicity, and renal toxicity of cisplatin during the treatment were evaluated. The SM-loaded PMs had small particle sizes (326-336 nm), negative surface charge, high entrapment efficiency (47-70%), and demonstrated pH-sensitive release. Rapid drug release was obtained at pH 7.4 (81-87% in 4 h). The SM-loaded PMs exhibited higher flux than free SM. Moreover, the pretreatment of SM (50-100 µg/mL)-loaded PMs increased the killing efficacy of cisplatin on the cancer cells. The renoprotective effect was witnessed (p < 0.05) on the cells pretreated with SM-loaded benzyl-functionalized succinyl chitosan (BSC) PMs compared with those treated with only cisplatin, which the % cell viability increased from 29% to 82% and 96% for the PMs with SM concentration of 50 and 100 µg/mL, respectively. Moreover, the reduction in cell apoptosis and necrosis induced by cisplatin has been observed. In conclusion, SM-loaded BSC PMs could improve the bioavailability of SM, enhance the therapeutic effect, and protect renal damage during the treatment with cisplatin.

HPMC/PVP Dissolving Microneedles: a Promising Delivery Platform to Promote Trans-Epidermal Delivery of Alpha-Arbutin for Skin Lightening.

Alpha-arbutin is one of the most efficient skin lightener agents, which shows the effect on reducing the pigmentation by competitively inhibiting human tyrosinase. However, alpha-arbutin has difficulty in skin permeability due to its hydrophilic property. The objective of this study was, therefore, to develop alpha-arbutin-loaded dissolving microneedles (DMNs) for improving the delivery of alpha-arbutin into the skin. The DMN patch was prepared using Gantrez™ S-97, hydroxypropyl methylcellulose (HPMC), polyvinylpyrrolidone K-90 (PVP), chitosan, and their combinations. The optimal 8% alpha-arbutin-loaded DMNs, aside from Gantrez™ S-97, was successfully formulated with combination of 8% w/w HPMC and 40% w/w PVP K-90 (HPMC/PVP) at the weight ratio of 1:1. Both DMNs had 100% of penetration into porcine skin. Over 12 h of skin permeation, the flux of Gantrez™ S-97 DMNs and the HPMC/PVP DMNs were 66.21 µg/cm2/h and 74.24 µg/cm2/h, respectively. The accumulation amount of alpha-arbutin in the skin from Gantrez™ S-97 DMNs and HPMC/PVP DMNs was 107.76 µg and 312.23 µg, respectively. In comparison to the gel formulations, Gantrez™ S-97 DMNs and HPMC/PVP DMNs increase the delivery of alpha-arbutin across the skin approximately 2 and 4.7 times, respectively. In vivo studies found that alpha-arbutin-loaded HPMC/PVP DMNs delivered more alpha-arbutin into the skin than commercial cream. Moreover, the skin can reseal naturally after removal of DMNs patch without any signs of infection and remain stable in accelerated conditions for 4 weeks. Accordingly, alpha-arbutin-loaded HPMC/PVP DMNs could be a promising delivery platform for promoting trans-epidermal delivery of alpha-arbutin for skin lightening.

Cyclodextrin-based oral dissolving films formulation of taste-masked meloxicam.

This work deals with fast-dissolving drug delivery systems of meloxicam (MX) derived from electrospun polyvinylpyrrolidone (PVP)/2-hydroxypropyl-ß-cyclodextrin (HPßCD) nanofiber mats. Electrospinning of solutions with different solvent systems [dimethylformamide (DMF) and ethyl alcohol (EtOH)] was performed. Prepared films were evaluated for morphology, physical, and mechanical properties. MX content, dissolving time, MX release, and cytotoxicity of films were investigated. In vivo studies were also performed in healthy human volunteers. The results showed that MX/HPßCD complexes improved the solubility of MX. PVP also increased MX solubility and the stability of MX/HPßCD complexes. Films were successfully prepared by two solvent systems with fiber in the nanometer range. MX was well incorporated into the films (100% efficiency). The X-ray patterns and DSC experiment indicated an amorphous form of MX. A fast disintegration time and burst release of MX was obtained from EtOH system. Cytotoxicity testing of the films produced by EtOH system proved safer than the DMF system. In vivo studies revealed that films rapidly dissolved in the mouth and had a less bitter taste than MX. These results suggest that electospun films from EtOH system may be a good candidate for fast-dissolving drug delivery systems to increase palatability of dosage forms.

Enhancement of Galantamine HBr Skin Permeation Using Sonophoresis and Limonene-Containing PEGylated Liposomes.

This study aimed to investigate the effect of low-frequency sonophoresis (SN) and limonene-containing PEGylated liposomes (PL) on the transdermal delivery of galantamine HBr (GLT). To evaluate the skin penetration mechanism, confocal laser scanning microscopy (CLSM), Fourier transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC) were employed. The application of SN led to more GLT penetration into and through the skin than GLT solution alone. The liposomes also improved GLT permeation, and 2% limonene-containing PL (PL-LI2%) exhibited the highest GLT permeation, followed by PL-LI1%, PL-LI0.1%, and PL. The CLSM images of PL-LI2% resulted in the highest fluorescence intensity of fluorescent hydrophilic molecules in the deep skin layer, and the rhodamine PE-labeled liposome membrane was distributed in the intercellular region of the stratum corneum (SC). PL-LI2% induced significant changes in intercellular lipids in the SC, whereas SN had no effect on intercellular lipids of the SC. DSC thermograms showed that the greatest decrease in the lipid transition temperature occurred in PL-LI2%-treated SC. SN might improve drug permeation through an intracellular pathway, while limonene-containing liposomes play an important role in delivering GLT through an intercellular pathway by increasing the fluidity of intercellular lipids in the SC. Moreover, a small vesicle size and high membrane fluidity might enhance the transportation of intact vesicles through the skin.

Apoptosis Induction and Antimigratory Activity of Andrographolide Analog (3A.1)-Incorporated Self-Assembled Nanoparticles in Cancer Cells.

Andrographolide analog, namely 19-tert-butyldiphenylsilyl-8,17-epoxy andrographolide (or 3A.1) has been reported to be a potential anticancer agent for several types of cancer. Due to its poor aqueous solubility, 3A.1 was incorporated within self-assembly polymeric nanoparticles made of naphthyl-grafted succinyl chitosan (NSC), octyl-grafted succinyl chitosan (OSC), and benzyl-grafted succinyl chitosan (BSC). These 3A.1-loaded nanoparticles were nanosized (< 200 nm) and spherical in shape with a negative surface charge. 3A.1-loaded nanoparticles were produced using a dropping method, which 40% initial drug adding exhibited the highest entrapment efficiency. The release of 3A.1 from the 3A.1-loaded nanoparticles displayed a delayed release pattern. Under acidic conditions (pH 1.2), there was no free drug release. After the pH was adjusted to 6.8, a high cumulative 3A.1 release was obtained which was dependent on the hydrophobic moieties. These 3A.1-loaded pH-sensitive nanoparticles proved to be beneficial for specifically delivering anticancer drugs to the targeted colon cancer sites. In vitro anticancer activity against HT-29 found that the 3A.1-loaded nanoparticles had significantly lower IC50 than that of the free drug and promoted apoptosis. Additionally, in vitro wound-healing migration on HN-22 revealed that free 3A.1 and the 3A.1-loaded nanoparticles inhibited cell motility compared with untreated cells. These pH-sensitive amphiphilic chitosan nanoparticles may be promising nanocarriers for oral anticancer drug delivery to colorectal cancer cells. Graphical abstract ᅟ.

Development of Chitosan-Based pH-Sensitive Polymeric Micelles Containing Curcumin for Colon-Targeted Drug Delivery.

pH-sensitive N-naphthyl-N,O-succinyl chitosan (NSCS) and N-octyl-N,O-succinyl chitosan (OSCS) polymeric micelles carriers have been developed to incorporate curcumin (CUR) for colon-targeted drug delivery. The physical entrapment methods (dialysis, co-solvent evaporation, dropping, and O/W emulsion) were applied. The CUR-loaded micelles prepared by the dialysis method presented the highest loading capacity. Increasing initial amount of CUR from 5 to 40 wt% to polymer resulted in the increase in loading capacity of the polymeric micelles. Among the hydrophobic cores, there were no significant differences in the loading capacity of CUR-loaded micelles. The particle sizes of all CUR-loaded micelles were in the range of 120-338 nm. The morphology of the micelles changed after being contacted with medium with different pH values, confirming the pH-responsive properties of the micelles. The release characteristics of curcumin from all CUR-loaded micelles were pH-dependent. The percent cumulative release of curcumin from all CUR-loaded micelles in simulated gastric fluid (SGF) was limited to about 20%. However, the release amount was significantly increased after contacted with simulated intestinal fluid (SIF) (50-55%) and simulated colonic fluid (SCF) (60-70%). The released amount in SIF and SCF was significantly greater than the release of CUR from CUR powder. CUR-loaded NSCS exhibited the highest anti-cancer activity against HT-29 colorectal cancer cells. The stability studies indicated that all CUR-loaded micelles were stable for at least 90 days. Therefore, the colon targeted, pH-sensitive NSCS micelles may have potential to be a prospective candidate for curcumin delivery to the colon.

Development of Microemulsions and Microemulgels for Enhancing Transdermal Delivery of Kaempferia parviflora Extract.

The purpose of this research was to develop microemulsions (ME) and microemulgels (MG) for enhancing transdermal delivery of Kaempferia parviflora (KP) extract. The methoxyflavones were used as markers. Various formulations of ME and MG containing 10% w/v KP extract were prepared, and the in vitro skin permeation and deposition were investigated. The potential ME system containing oleic acid (5% w/v), Tween 20 (20% w/v), PG (40% w/v), and water (35% w/v) was successfully formulated. ME with 10% w/v limonene (ME-L10%) showed higher methoxyflavones flux than ME-L5%, ME-L1%, ME without limonene, and KP extract in water, respectively. ME-L10% was selected for adding a gelling agent to form microemulgels (MG-L10%). However, the high viscosity of the gel formulation might control the diffusion of the compound from gel layer into the skin. Therefore, the liquid formulation provided potential ME droplets to deliver KP extract through the skin. Limonene also plays an effective role on the skin permeation, in which the histological image of the skin treated with ME-L10% exhibited larger space of each flattened keratinocyte layer in the stratum corneum compared to the skin treated with KP extract in water. Moreover, ME-L10% showed good stability. Therefore, ME-L10% was a potential formulation for improving transdermal delivery of KP extract.

Cationic Niosomes for Enhanced Skin Immunization of Plasmid DNA-Encoding Ovalbumin via Hollow Microneedles.

The purpose of the present study was to evaluate the use of cationic niosomes composed of Span20:cholesterol:cationic lipid (N 1,N 1-dimyristeroyloxyethyl-spermine) at the molar ratio of 2.5:2.5:0.5 mM combined with hollow microneedle (MN) devices for in vivo skin immunization of plasmid DNA-encoding ovalbumin (pOVA). The results revealed that using hollow MNs with cationic niosomes for pOVA penetration successfully induced both humoral and cell-mediated immune responses including immunoglobulin G (IgG) antibody responses, interleukin-4 (IL-4), and interferon gamma (IFN-γ) cytokine secretion. When using hollow MNs with cationic niosome/pOVA complexes, the immune response was superior to naked pOVA, which testifies the increased amount of IgG antibody responses and cytokine secretion. In comparison with conventional subcutaneous (SC) injections, using hollow MNs with cationic niosome/pOVA complexes induced a higher level of both IgG immune response and cytokine release. Moreover, a group of mice immunized with hollow MNs did not show infection or bleeding on the skin. Consequently, targeted delivery of pOVA using cationic niosomes combined with hollow MNs might prove a promising vaccination method for skin vaccination.