RESUMEN
Tropomyosin (Tpm) is a two-stranded parallel α-helical coiled-coil protein, and studying its structure is crucial for understanding the nature of coiled coils. Previously, we found that the N-terminal half of the human skeletal muscle α-Tpm (α-Tpm 140) was less structurally stable in the presence of phosphate ions than the coiled-coil protein carrier (CCPC) 140 variant with 18 mutated residues, in which all amino acid residues located at the interface between the two α-helices were completely conserved. A classical hypothesis explains that interhelical interactions stabilize the coiled-coil structure. In this study, we tested the hypothesis that the structural stability of Tpm and its variant is governed by the binding of multivalent ions that form a bridge between charged side chains located at positions b, c, and f of the heptad repeat on a single α-helical chain. We found that the structural stability of α-Tpm 140 and CCPC 140 markedly increased upon addition of divalent cations and divalent anions, respectively. We also clarified that the structural stability of the α-Tpm 140/CCPC 140 heteromeric coiled-coil molecule was governed by the stability of a less stable α-helical chain. These results demonstrated that the entire structural stability of Tpm is determined by the stability of a single α-helix. Our findings provide new insights into the study of the structure of coiled-coil proteins.
Asunto(s)
Tropomiosina/química , Humanos , Conformación Proteica en Hélice alfa , Estabilidad Proteica , TemperaturaRESUMEN
Fe3 O4 anisotropic nanostructures that exhibit excellent catalytic performance are rarely used to catalyze Fenton-like reactions because of the inevitable drawbacks resulting from traditional preparation methods. In this study, a facile, nontoxic, water-based approach is developed for directly regulating a series of anisotropic morphologies of Fe3 O4 nanostructures in a hydrogel matrix. In having the advantages of both the catalytic activity of Fe3 O4 and the adsorptive capacity of an anionic polymer network, the hybrid nanocomposites have the capability to effect the rapid removal of cationic dyes, such as methylene blue, from water samples. Perhaps more interestingly, hybrid nanocomposites loaded with Fe3 O4 nanorods exhibit the highest catalytic activity compared to those composed of nanoneedles and nanooctahedra, revealing the important role of nanostructure morphology. By means of scanning electrochemical microscopy, it is revealed that Fe3 O4 nanorods can efficiently catalyze H2 O2 decomposition and thus generate more free radicals ((.) OH, (.) HO2 ) for methylene blue degradation, which might account for their high catalytic activity.
RESUMEN
Many strategies have been explored to achieve artificial photosynthesis utilizing mediums such as liposomes and supramolecules. Because the photochemical reaction is composed of multiple functional molecules, the surrounding microenvironment is expected to be rationally integrated as observed during photosynthesis in chloroplasts. In this study, photoinduced electronic transmission surrounding the microenvironment of Ru(bpy)3(2+) in a polymer network was investigated using poly(N-isopropylacrylamide-co-Ru(bpy)3), poly(acrylamide-co-Ru(bpy)3), and Ru(bpy)3-conjugated microtubules. Photoinduced energy conversion was evaluated by investigating the effects of (i) Ru(bpy)3(2+) immobilization, (ii) polymer type, (iii) thermal energy, and (iv) cross-linking. The microenvironment surrounding copolymerized Ru(bpy)3(2+) in poly(N-isopropylacrylamide) suppressed quenching and had a higher radiative process energy than others. This finding is related to the nonradiative process, i.e., photoinduced H2 generation with significantly higher overall quantum efficiency (13%) than for the bulk solution. We envision that useful molecules will be generated by photoinduced electronic transmission in polymer networks, resulting in the development of a wide range of biomimetic functions with applications for a sustainable society.
Asunto(s)
2,2'-Dipiridil/análogos & derivados , Resinas Acrílicas/química , Materiales Biomiméticos/química , Electrones , 2,2'-Dipiridil/química , Complejos de Coordinación , Hidrógeno/química , Luz , Microtúbulos/química , Fotoquímica/métodos , Fotosíntesis/fisiología , TermodinámicaRESUMEN
Molecules with structural anisotropy and rigidity, such as asbestos, demonstrate high cell-penetrating activity but also high toxicity. Here we synthesize a biodegradable, rigid, and fibrous artificial protein, CCPC 140, as a potential vehicle for cellular delivery. CCPC 140 penetrated 100% of cells tested in vitro, even at a concentration of 3.1 nM-superior to previously reported cell-penetrating peptides. The effects of cell-strain-dependency and aspect ratio on the cell-penetrating activity of CCPC 140 were also investigated.
Asunto(s)
Péptidos de Penetración Celular/química , Secuencia de Aminoácidos , Animales , Anisotropía , Péptidos de Penetración Celular/síntesis química , Péptidos de Penetración Celular/metabolismo , Portadores de Fármacos/síntesis química , Portadores de Fármacos/química , Portadores de Fármacos/metabolismo , Células HeLa , Humanos , Masculino , Fenómenos Mecánicos , Datos de Secuencia Molecular , Conejos , Tropomiosina/químicaRESUMEN
Numerous cationic peptides that penetrate cells have been studied intensively as drug delivery system carriers for cellular delivery. However, cationic molecules tend to be cytotoxic and cause inflammation, and their stability in the blood is usually low. We have previously demonstrated that a rigid and fibrous cationic coiled-coil protein exhibited cell-penetrating ability superior to that of previously reported cell-penetrating peptides. Making use of structural properties, here we describe the cell-penetrating activity of a rigid and fibrous coiled-coil protein with a noncationic surface. A fibrous coiled-coil protein of pI 6.5 penetrated 100% of the cells tested in vitro at a concentration of 500 nM, which is comparable to that of previously reported cell-penetrating peptides. We also investigated the effect of cell-strain dependency and short-term cytotoxicity.
Asunto(s)
Péptidos de Penetración Celular/farmacología , Secuencia de Aminoácidos , Anisotropía , Línea Celular Tumoral , Supervivencia Celular/efectos de los fármacos , Péptidos de Penetración Celular/química , Relación Dosis-Respuesta a Droga , Células HeLa , Humanos , Células K562 , Datos de Secuencia Molecular , Relación Estructura-ActividadRESUMEN
Most existing magnetic hydrogels are weak and brittle. The development of strong and tough magnetic hydrogels would extend their applications into uncultivated areas, such as in actuators for soft machines and guided catheters for magnetic navigation systems, which is still a big challenge. Here a facile and versatile approach to fabricating highly stretchable, exceptionally tough and notch-insensitive magnetic hydrogels, Fe(3)O(4)@Fe-alginate/polyacrylamide (PAAm), is developed, by dispersing alginate-coated Fe(3)O(4) nanoparticles into the interpenetrating polymer networks of alginate and PAAm, with hybrid physical and chemical crosslinks. A cantilever bending beam actuator as well as a proof-of-concept magnetically guided hydrogel catheter is demonstrated. The method proposed in this work can be integrated into other strong and tough magnetic hydrogels for the development of novel hydrogel nanocomposites with both desirable functionality and superior mechanical properties.
Asunto(s)
Resinas Acrílicas , Alginatos , Compuestos Férricos , Hidrogeles/química , Nanopartículas de Magnetita/química , Ácido Glucurónico , Dureza , Ácidos Hexurónicos , Resistencia al CorteRESUMEN
As representative soft materials with widespread applications, gels with various functions have been developed. However, traditional gels are vulnerable to stress-induced formation of cracks. The propagation of these cracks may affect the integrity of network structures of gels, resulting in the loss of functionality and limiting the service life of the gels. To address this challenge, self-healing gels that can restore their functionalities and structures after damage have been developed as "smart" soft materials. In this paper, we present an overview of the current strategies for synthesizing self-healing gels based on the concept of constitutional dynamic chemistry, which involves molecular structures capable of establishing dynamic networks based upon physical interactions or chemical reactions. The characterization methods of self-healing gels and the key factors that affect self-healing properties are analyzed. We also illustrate the emerging applications of self-healing gels, with emphasis on their usage in industry (coatings, sealants) and biomedicine (tissue adhesives, agents for drug or cell delivery). We conclude with a perspective on challenges facing the field, along with prospects for future development.
Asunto(s)
Geles/química , Adhesivos , Sistemas de Liberación de Medicamentos , Geles/síntesis química , Concentración de Iones de Hidrógeno , Estructura MolecularRESUMEN
In this paper, we describe stimuli-responsive hydrogels prepared from a rigid rod-like polyelectrolyte 'imogolite' and a dicarboxylic acid. The hydrogel exhibited thixotropy in response to mechanical shock within the order of seconds or sub-seconds. Here, using the latest structural/rheological characterisation techniques, the relationship between the structural transition processes and the shear thinning was estimated. The evidence obtained by the experiments revealed for the first time the direct relationship between the microscopic structural change and the macroscopic thixotropic behavior that have been extensively discussed. The thixotropic hydrogel has the hierarchical architecture in the combination of imogolite and dicarboxylic acid, i.e., sheathed nanotubes/hydroclusters of cross-bridged nanotubes/frameworks. The formation and disintegration of the network structure upon resting and agitating, respectively, were the origin of gel/sol transition (thixotropy), although the hydroclusters of cross-bridged nanotubes were maintained throughout the transition.
RESUMEN
Thermoresponsive hybrids consisting of synthetic polymers and microtubules (MTs), i.e., assemblies of tubulins, were prepared by bonding MTs covalently to a few reactive units in a macromolecular strand. The hybrids exhibited the gel/sol transition because of the "assembling of tubulins to MTs/disintegrating of MTs to tubulins" by the temperature change between 37 and 4 °C, respectively. The viscoelastic behaviors of the hybrid gels depended upon the quantity of polymer feed and the amount of resulting covalent bonds between the polymers and tubulin units. Furthermore, in a confined space of a thin and long rectangular cell with the temperature gradient from 4 °C (cold terminal) to 37 °C (warm terminal), the sol state hybrid turned to the gel state that propagated from the warm terminal toward the cold terminal to form uniaxially oriented MT arrays. Upon changing the temperature of the whole system between 37 and 4 °C, the uniaxial arrays appeared/disappeared reversibly.
Asunto(s)
Microtúbulos/química , Polímeros/química , Temperatura , Modelos Moleculares , Estructura Molecular , Polímeros/síntesis químicaRESUMEN
A dextran-based self-healing hydrogel is prepared by reversible Diels-Alder reaction under physiological conditions. Cytocompatible fulvene-modified dextran as main polymer chains and dichloromaleic-acid-modified poly(ethylene glycol) as cross-linkers are used. Both macro- and microscopic observation as well as the rheological recovery test confirm the self-healing property of the dextran-l-poly(ethylene glycol) hydrogels ("l" means "linked-by"). In addition, scanning electrochemical microscopy is used to qualitatively and quantitatively in situ track the self-healing process of the hydrogel for the first time. It is found that the longitudinal depth of scratch on hydrogel surface almost completely healed at 37 °C after 7 h. This work represents a facile approach for fabrication of polysaccharide self-healing hydrogel, which can be potentially used in several biomedical fields.
Asunto(s)
Reacción de Cicloadición , Dextranos/química , Hidrogeles/química , Polímeros/química , Polietilenglicoles/química , Polisacáridos/química , ReologíaRESUMEN
A chemically cross-linked filamentous actin (F-actin) gel consisting of globular actin (G-actin) as repeating units was prepared. The F-actin gel was cross-linked by covalent bonds, and the main chain is represented by the self-assembly of G-actin with a high-ordered hierarchical structure. The gel exhibited good mechanical performance with a storage modulus >1 kPa and undergoes reversible sol-gel transitions in response to changes in the salt concentration (chemical-induced sol-gel transition) as well as to shear strain (mechanical-induced sol-gel transition). Therefore, the gel exhibits self-repairing ability through dynamic polymerization and depolymerization across the structure hierarchies under repeated shear stress.
Asunto(s)
Actinas/ultraestructura , Hidrogeles/química , Hidrogeles/síntesis química , Actinas/química , Actinas/metabolismo , Microtúbulos/química , Polimerizacion , Estrés Mecánico , Estrés FisiológicoRESUMEN
A thermoresponsive 3D microtubule hydrogel (MT gel) was prepared by simultaneous polymerization and chemical cross-linking of tubulins. The main chain of this gel is composed of cross-linked MTs, which consists of a cylindrical assembly of tubulin covalently connected by polyethylene glycol. This gel, which contains 10 mg/mL of tubulin, exhibits a storage modulus G' as high as 1 × 10(3), which is 10 times higher than the loss modulus G'' over a wide range of frequencies. The MT gel exhibits a reversible sol-gel transition by temperature changes at 4-37 °C via depolymerization and polymerization of the MT network. Notable effects of the presence of the cross-linkage on the process of polymerization and depolymerization of tubulin were experimentally observed, and the role of the cross-linkage was discussed.
Asunto(s)
Hidrogeles , Microtúbulos , Electroforesis en Gel de Poliacrilamida , ReologíaRESUMEN
By using rigid microtubules (MTs) prepared by polymerization with guanylyl-(alpha, beta)-methylene-diphosphonate GMPCPP, giant straight-shaped MT bundles were selectively obtained through a dynamic self-assembly process. We demonstrate the effect of the rigidity on the shape and motility of MT bundle composed of GMPCPP-polymerized MTs (GMPCPP-MTs) compared with control MTs that were polymerized with GTP and stabilized with paclitaxel.
Asunto(s)
Microtúbulos/química , Microtúbulos/metabolismo , Animales , Guanosina Trifosfato/análogos & derivados , Guanosina Trifosfato/metabolismo , Cinesinas/metabolismo , Movimiento , Porcinos , Tubulina (Proteína)/metabolismoRESUMEN
A flexible, transparent nanocomposite (NC) film with 57 wt % inorganic components was obtained by the simple casting of a solution of Laponite and modified organic molecules through a sol-gel reaction. The NC film has solvent resistance and a disco-nematic liquid-crystalline-like structure of Laponite that originates from the cross linking of Laponite by silanol agents and the large amount of Laponite in the film.
RESUMEN
Recently, a method was established for the formation of microtubule (MT) assemblies by an active self-organization (AcSO) process, in which MTs were crosslinked during sliding motion on a kinesin-coated surface, and this was coupled with adenosine triphosphate (ATP) hydrolysis. Streptavidin (ST) was the glue used to crosslink biotin-labeled MTs. Although most of the MT assemblies were in the bundle form, they varied in size, shape and motility, depending on the initial conditions used. In this paper, we systematically examined the effects of the concentrations of kinesin, ST and MT on the formation of MT bundles under the initial conditions of the process.
Asunto(s)
Adenosina Trifosfato/farmacología , Cinesinas/farmacología , Microtúbulos/efectos de los fármacos , Microtúbulos/metabolismo , Estreptavidina/farmacología , Animales , Movimiento/efectos de los fármacos , Sus scrofaRESUMEN
Tubulin polymerization in a confined space under a temperature gradient produced well-oriented microtubule assemblies with preferential polarity. We analyzed the structure and polarity of these assemblies at various levels of resolution by performing polarized light microscopy (millimeter order), fluorescence microscopy (micrometer order), and transmission electron microscopy (nanometer order).
Asunto(s)
Materiales Biomiméticos/síntesis química , Biomimética , Microtúbulos/química , Tubulina (Proteína)/química , Anisotropía , Materiales Biomiméticos/química , Entropía , Vidrio , Proteínas Fluorescentes Verdes/química , Guanosina Trifosfato/química , Cinesinas/química , Microscopía Electrónica de Transmisión , Microscopía Fluorescente , Microscopía de Polarización , Microtúbulos/ultraestructura , TemperaturaRESUMEN
In this paper, we reveal that microtubules (MTs), reconstructed from tubulin in vitro in the presence of guanosine-5'-triphosphate (GTP), have a ring or spiral shape on a motor protein-fixed surface, and these MTs show biased motion in the counterclockwise direction. By cross-linking these MTs during the sliding motion, we obtained large ring-shaped MT assemblies, 1 approximately 12.6 microm in diameter. The ratio of the rings rotating in the counterclockwise direction to those rotating in the clockwise direction was approximately 3/1. Under optimized conditions, the ratio was as high as 14/1. Thus, we successfully obtained aggregated MTs with a large hierarchic structure that shows a preferential motion, through a dynamic process in vitro.
Asunto(s)
Microtúbulos/química , Microtúbulos/metabolismo , Movimiento , Biotina/química , Guanosina Trifosfato/metabolismo , Cinesinas/aislamiento & purificación , Cinesinas/metabolismo , Tamaño de la Partícula , Rodaminas/química , Rotación , Coloración y Etiquetado , Propiedades de Superficie , Factores de Tiempo , Tubulina (Proteína)/química , Tubulina (Proteína)/aislamiento & purificación , Tubulina (Proteína)/metabolismoRESUMEN
Three-dimensional structures of actin bundles formed with polycations were observed by using transmission electron microtomography and atomic force microscopy. We found, for the first time, that the cross-sectional morphology of actin bundles depends on the polycation species and ionic strength, while it is insensitive to the degree of polymerization and concentration of polycation. Actin bundles formed with poly-N-[3-(dimethylamino)propyl] acrylamide methyl chloride quaternary show a ribbon-like cross-sectional morphology in low salt concentrations that changes to cylindrical cross-sectional morphology with hexagonal packing of the actin filaments in high salt concentrations. Contrastingly, actin bundles formed with poly-L-lysine show triangular cross-sectional morphology with hexagonal packing of the actin filaments. These variations in cross-sectional morphology are discussed in terms of anisotropy in the electrostatic energy barrier.
Asunto(s)
Actinas/química , Imagenología Tridimensional , Poliaminas/química , Citoesqueleto de Actina/química , Actinas/análisis , Animales , Imagenología Tridimensional/métodos , Estructura Molecular , Pectinidae , Poliaminas/análisis , PolielectrolitosRESUMEN
In this paper, the frictional behavior of a neutral hydrogel, polyvinyl alcohol (PVA), on smooth solid substrates with various levels of hydrophobicity have been investigated in water using a strain-controlled parallel-plate rheometer. For the sliding velocity dependence of friction, we detected a distinct friction transition on hydrophobic substrates that are strongly adhesive to the gel, while no clear transition was observed on hydrophilic substrates that are weakly adhesive to the gel. Even on the most hydrophobic substrate, the maximum frictional stress is approximately 1/10-1/5 of the gel's elastic modulus under a large normal strain of 26%. Furthermore, the frictional stress on hydrophobic substrates in the high velocity region, larger than the transition, is much lower than that on hydrophilic ones. We attempted to explain these phenomena with the help of two models: a molecular model based on the thermal fluctuations occurring during adsorption-desorption of polymers and a continuum mechanics model based on elastic dewetting and forced wetting.
RESUMEN
We investigated the sliding friction between a soft hydrogel and rough and weakly adhesive solid substrates in a water environment. Polyvinyl alcohol (PVA) hydrogels of different elastic moduli and two sets of glass substrates with different contact angles to water, all of which varied in their surface roughness, were used. The friction measurement was performed by using a strain-controlled parallel-plate rheometer. With an increase in substrate roughness, the friction in the low velocity region increased slightly, while it decreased significantly above a critical velocity on a surface with a roughness larger than 1 µm. Below this critical velocity, the frictional stress changed with the glass substrate surface energy, while above this critical velocity, it was not sensitive to the glass substrate surface energy. The velocity-dependence of friction on rough surfaces is explained in terms of surface contact dynamics and is characterized by two velocities, i.e., vf and vdrainage. The former is determined by the cooperative diffusion constant of the gels, and the latter is by the surface roughness of the substrate and the normal pressure applied on the gel.