Functional Characterization of the MeSSIII-1 Gene and Its Promoter from Cassava.

Soluble starch synthases (SSs) play important roles in the synthesis of cassava starch. However, the expression characteristics of the cassava SSs genes have not been elucidated. In this study, the MeSSIII-1 gene and its promoter, from SC8 cassava cultivars, were respectively isolated by PCR amplification. MeSSIII-1 protein was localized to the chloroplasts. qRT-PCR analysis revealed that the MeSSIII-1 gene was expressed in almost all tissues tested, and the expression in mature leaves was 18.9 times more than that in tuber roots. MeSSIII-1 expression was induced by methyljasmonate (MeJA), abscisic acid (ABA), and ethylene (ET) hormones in cassava. MeSSIII-1 expression patterns were further confirmed in proMeSSIII-1 transgenic cassava. The promoter deletion analysis showed that the -264 bp to -1 bp MeSSIII-1 promoter has basal activity. The range from -1228 bp to -987 bp and -488 bp to -264 bp significantly enhance promoter activity. The regions from -987 bp to -747 bp and -747 bp to -488 bp have repressive activity. These findings will provide an important reference for research on the potential function and transcriptional regulation mechanisms of the MeSSIII-1 gene and for further in-depth exploration of the regulatory network of its internal functional elements.

Purification and comparison of soluble and membrane-bound polyphenol oxidase from potato (Solanum tuberosum) tubers.

Enzymatic browning greatly affects the quality of potato products. Polyphenol oxidase (PPO) is the enzyme mainly responsible for potato enzymatic browning. PPO has soluble polyphenol oxidase (sPPO) and membrane-bound polyphenol oxidase (mPPO) forms. In this study, the properties of sPPO and mPPO were investigated in potato tubers. The molecular weight of potato sPPO and mPPO were estimated to be 69 kDa in the form of homodimers in vivo. The mass spectrometry results showed that the purified sPPO and mPPO protein in potato tubers was mainly tr|M1BMR6 (Uniprot). The optimum pH for sPPO and mPPO was 6.5, and the optimum temperatures were 20 and 30 °C, respectively. The Michaelis constant (Km) and maximum unit enzyme activity (Vmax) of sPPO were 6.08 mM and 2161 U/S when catechol was used as the substrate, whereas those of mPPO were 2.95 mM and 2129.53 U/S, respectively. The mPPO had stronger affinity to the substrate catechol than sPPO, whereas pyrogallic acid was stronger affinity for sPPO. Ascorbic acid and sodium sulfite were inhibitors of sPPO and mPPO, respectively. After understanding the different binding states of polyphenol oxidase, different inhibitors and treatment methods can be used to treat the enzyme according to different enzymatic properties, so as to achieve a greater degree of Browning control. These results will provide a theoretical basis for regulating PPO activity to reduce enzymatic browning during potato processing.

[Chewing Screen and Interventions for Older Adults].

Seeing older adults with nasogastric (NG) tubes in nursing homes is an unfortunately widespread phenomenon in Taiwan. NG tubes deprive the wearer of the tastes, smells, and joys of food and have been associated with malnutrition and increased susceptibility to aspiration pneumonia. In our studies, we found that 43% of nursing home residents in Taiwan are intubated with an NG tube and revealed a significant lower body mass index and hypoalbuminemia in these residents. In addition, the prevalence of dysphagia in residents of long-term care institutions was found to be greater than 60%. Older adults with dysphagia usually rely on liquid diets, which are frequently low in fiber, fruit, vegetable, and cereal contents. It is well known that diets low in fiber and vegetables increase the risks of constipation and cardiovascular events in older adults. A low intake of plant flavanols may also make older adults more susceptible to chronic inflammation. A high intake of red meats, eggs, or seafood may nurture gut microorganisms that catabolize carnitine and choline to trimethylamine-N oxide and which have been significantly linked to cardiovascular diseases and increased mortality. In contrast, eating plant vegetables and cereals is known to nurture better microbiota that produce short chain fatty acids, which, in turn, nurture enterocytes and improve immunity and brain health. Thus, the aims of this article are to demonstrate how to assess elders with chewing difficulty and dysphagia and to provide functional food scales for the classification, training, and care of active-aging nutrition. Through this article, we anticipate helping long-term care caregivers master key techniques for training and caring for elders with chewing difficulties and/or dysphagia. This article is also expected to 1) improve the nutrition of elders and satisfaction with feeding, 2) improve chewing and dysphagia care and training in long-term care institutions, and 3) avoid NG tube institution and aspiration pneumonia. The suggestions of this article may be used in the future to assist long-term care units across the interdisciplinary care providers teams to promote chewing instruction, swallowing care training, and active aging, appropriate nutrition, and health in older adult populations.

Transforming waste biomass with an intrinsically porous network structure into porous nitrogen-doped graphene for highly efficient oxygen reduction.

Porous nitrogen-doped graphene with a very high surface area (1152 m(2) g(-1)) is synthesized by a novel strategy using intrinsically porous biomass (soybean shells) as a carbon and nitrogen source via calcination and KOH activation. To redouble the oxygen reduction reaction (ORR) activity by tuning the doped-nitrogen content and type, ammonia (NH3) is injected during thermal treatment. Interestingly, this biomass-derived graphene catalyst exhibits the unique properties of mesoporosity and high pyridine-nitrogen content, which contribute to the excellent oxygen reduction performance. As a result, the onset and half-wave potentials of the new metal-free non-platinum catalyst reach -0.009 V and -0.202 V (vs. SCE), respectively, which is very close to the catalytic activity of the commercial Pt/C catalyst in alkaline media. Moreover, our catalyst has a higher ORR stability and stronger CO and CH3OH tolerance than Pt/C in alkaline media. Importantly, in acidic media, the catalyst also exhibits good ORR performance and higher ORR stability compared to Pt/C.

Dual-doping to suppress cracking in spinel LiMn2O4: a joint theoretical and experimental study.

Electrochemical cycling stabilities were compared for undoped and Al/Co dual-doped spinel LiMn2O4 synthesized by solid state reactions. We observed the suppression of particle fracture in Al/Co dual-doped LiMn2O4 during charge/discharge cycling and its distinguishable particle morphology with respect to the undoped material. Systematic first-principles calculations were performed on undoped, Al or Co single-doped, and Al/Co dual-doped LiMn2O4 to investigate their structural differences at the atomistic level. We reveal that while Jahn-Teller distortion associated with the Mn(3+)O6 octahedron is the origin of the lattice strain, the networking -i.e. the distribution of mixed valence Mn ions - is much more important to release the lattice strain, and thus to alleviating particle cracking. The calculations showed that the lattice mismatching between Li(+) intercalation and deintercalation of LiMn2O4 can be significantly reduced by dual-doping, and therefore also the volumetric shrinkage during delithiation. This may account for the near disappearance of cracks on the surface of Al/Co-LiMn2O4 after 350 cycles, while some obvious cracks have developed in undoped LiMn2O4 at similar particle size even after 50 cycles. Correspondingly, Al/Co dual-doped LiMn2O4 showed a good cycling stability with a capacity retention of 84.1% after 350 cycles at a rate of 1C, 8% higher than the undoped phase.

A New Core/Shell NiAu/Au Nanoparticle Catalyst with Pt-like Activity for Hydrogen Evolution Reaction.

We report a general approach to NiAu alloy nanoparticles (NPs) by co-reduction of Ni(acac)2 (acac = acetylacetonate) and HAuCl4·3H2O at 220 °C in the presence of oleylamine and oleic acid. Subject to potential cycling between 0.6 and 1.0 V (vs reversible hydrogen electrode) in 0.5 M H2SO4, the NiAu NPs are transformed into core/shell NiAu/Au NPs that show much enhanced catalysis for hydrogen evolution reaction (HER) with Pt-like activity and much robust durability. The first-principles calculations suggest that the high activity arises from the formation of Au sites with low coordination numbers around the shell. Our synthesis is not limited to NiAu but can be extended to FeAu and CoAu as well, providing a general approach to MAu/Au NPs as a class of new catalyst superior to Pt for water splitting and hydrogen generation.

Nanostructure-based proton exchange membrane for fuel cell applications at high temperature.

As a clean and highly efficient energy source, the proton exchange membrane fuel cell (PEMFC) has been considered an ideal alternative to traditional fossil energy sources. Great efforts have been devoted to realizing the commercialization of the PEMFC in the past decade. To eliminate some technical problems that are associated with the low-temperature operation (such as catalyst poisoning and poor water management), PEMFCs are usually operated at elevated temperatures (e.g., > 100 degrees C). However, traditional proton exchange membrane (PEM) shows poor performance at elevated temperature. To achieve a high-performance PEM for high temperature fuel cell applications, novel PEMs, which are based on nanostructures, have been developed recently. In this review, we discuss and summarize the methods for fabricating the nanostructure-based PEMs for PEMFC operated at elevated temperatures and the high temperature performance of these PEMs. We also give an outlook on the rational design and development of the nanostructure-based PEMs.

Effects of Cathode GDL Gradient Porosity Distribution along the Flow Channel Direction on Gas-Liquid Transport and Performance of PEMFC.

The gas diffusion layer (GDL) is an important component of proton exchange membrane fuel cells (PEMFCs), and its porosity distribution has considerable effects on the transport properties and durability of PEMFCs. A 3-D two-phase flow computation fluid dynamics model was developed in this study, to numerically investigate the effects of three different porosity distributions in a cathode GDL: gradient-increasing (Case 1), gradient-decreasing (Case 3), and uniform constant (Case 2), on the gas-liquid transport and performance of PEMFCs; the novelty lies in the porosity gradient being along the channel direction, and the physical properties of the GDL related to porosity were modified accordingly. The results showed that at a high current density (2400 mA·cm-2), the GDL of Case 1 had a gas velocity of up to 0.5 cm·s-1 along the channel direction. The liquid water in the membrane electrode assembly could be easily removed because of the larger gas velocity and capillary pressure, resulting in a higher oxygen concentration in the GDL and the catalyst layer. Therefore, the cell performance increased. The voltage in Case 1 increased by 8% and 71% compared to Cases 2 and 3, respectively. In addition, this could ameliorate the distribution uniformity of the dissolved water and the current density in the membrane along the channel direction, which was beneficial for the durability of the PEMFC. The distribution of the GDL porosity at lower current densities had a less significant effect on the cell performance. The findings of this study may provide significant guidance for the design and optimization of the GDL in PEMFCs.

Pore-Scale Modeling of Microporous Layer for Proton Exchange Membrane Fuel Cell: Effective Transport Properties.

A microporous layer (MPL) is a transition layer with a porous material structure, located between the gas diffusion layer (GDL) and catalyst layer (CL) in a proton exchange membrane fuel cell (PEMFC). It not only significantly improves electron transfer and heat conduction in membrane electrode assembly, but also effectively manages liquid water transport to enhance the fuel cell performance. The MPL is usually coated on one side of the GDL. The fragile nature of MPL makes it challenging to characterize the effective transport properties using experimental methods. In this study, a stochastic numerical method is implemented to reconstruct the three-dimensional microstructure of an MPL consisting of carbon particles and PTFE. The reliability of the MPL reconstructed model is validated using experimental data. The relationship between the effective transport properties and the compression strain is obtained using the Pore Scale Model (PSM), while the relationship between the liquid water saturation and capillary pressure is solved by Lattice Boltzmann Method (LBM). The effective transport properties in the MPL are then imported into the two-phase flow fuel cell model. It is found that the effective transport parameters in MPL obtained by PSM and LBM can improve the accuracy of the model calculation. This study provides an effective method to reconstruct the microstructure of MPL that can generate precise MPL transport parameters for utilization in various PEMFC performance prediction models.

Prodigiosin activates endoplasmic reticulum stress cell death pathway in human breast carcinoma cell lines.

Prodigiosin is a bacterial tripyrrole pigment with potent cytotoxicity against diverse human cancer cell lines. Endoplasmic reticulum (ER) stress is initiated by accumulation of unfolded or misfolded proteins in the ER lumen and may induce cell death when irremediable. In this study, the role of ER stress in prodigiosin-induced cytotoxicity was elucidated for the first time. Comparable to the ER stress inducer thapsigargin, prodigiosin up-regulated signature ER stress markers GRP78 and CHOP in addition to activating the IRE1, PERK and ATF6 branches of the unfolded protein response (UPR) in multiple human breast carcinoma cell lines, confirming prodigiosin as an ER stress inducer. Prodigiosin transcriptionally up-regulated CHOP, as evidenced by its promoting effect on the CHOP promoter activity. Of note, knockdown of CHOP effectively lowered prodigiosin's capacity to evoke PARP cleavage, reduce cell viability and suppress colony formation, highlighting an essential role of CHOP in prodigiosin-induced cytotoxic ER stress response. In addition, prodigiosin down-regulated BCL2 in a CHOP-dependent manner. Importantly, restoration of BCL2 expression blocked prodigiosin-induced PARP cleavage and greatly enhanced the survival of prodigiosin-treated cells, suggesting that CHOP-dependent BCL2 suppression mediates prodigiosin-elicited cell death. Moreover, pharmacological inhibition of JNK by SP600125 or dominant-negative blockade of PERK-mediated eIF2α phosphorylation impaired prodigiosin-induced CHOP up-regulation and PARP cleavage. Collectively, these results identified ER stress-mediated cell death as a mode-of-action of prodigiosin's tumoricidal effect. Mechanistically, prodigiosin engages the IRE1-JNK and PERK-eIF2α branches of the UPR signaling to up-regulate CHOP, which in turn mediates BCL2 suppression to induce cell death.

Highly active platinum nanoparticles on graphene nanosheets with a significant improvement in stability and CO tolerance.

Graphene nanosheets (GNS) supporting Pt nanoparticles (PNs) are prepared using perfluorosulfonic acid (PFSA) as a functionalization and anchoring agent. Transmission electron microscope (TEM) results indicate that the prepared Pt NPs are uniformly deposited on GNS with a narrow particle size ranging from 1 to 4 nm in diameter. A high catalytic activity of this novel catalyst is observed by both cyclic voltammetry and oxygen reduction reaction (ORR) measurements due to the increasing of proton (H(+)) transmission channels. Significantly, this novel PFSA-functionalized Pt/GNS (PFSA-Pt/GNS) catalyst reveals a better CO oxidation and lower loss rate of electrochemical active area in comparison with that of the plain Pt/GNS and conventional Pt/C catalysts, indicating our PFSA-Pt/GNS catalysts hold much higher stability and CO tolerance by virtue of introduction of PFSA.

Hydrothermal core-shell carbon nanoparticle films: thinning the shell leads to dramatic pH response.

Carbon nanoparticles with phenylsulfonate negative surface functionality (Emperor 2000, Cabot Corp.) are coated with positive chitosan followed by hydrothermal carbonization to give highly pH-responsive core-shell nanocarbon composite materials. With optimised core-shell ratio (resulting in an average shell thickness of ca. 4 nm, estimated from SANS data) modified electrodes exhibit highly pH-sensitive resistance, capacitance, and Faradaic electron transfer responses (solution based, covalently bound, or hydrothermally embedded). A shell "double layer exclusion" mechanism is discussed to explain the observed pH switching effects. Based on this mechanism, a broader range of future applications of responsive core-shell nanoparticles are envisaged.

Two-Dimensional Simulation of the Freezing Characteristics in PEMFCs during Cold Start Considering Ice Crystallization Kinetics.

Cold start is one of the major issues that hinders the commercialization of polymer electrolyte membrane fuel cells (PEMFCs). In this study, a 2D transient multi-physics model is developed to simulate the cold start processes in a PEMFC. The phase change between water vapor, liquid water, and ice in the catalyst layers (CLs), micro porous layer (MPLs), and gas diffusion layers (GDLs) is also investigated, particularly the effect of ice crystallization kinetics when supercooled liquid water changes into ice. The factors affecting the different operating conditions and structural features of the membrane electrode assembly (MEA) are investigated. The results show that when the start temperature is -20 °C or higher, ice formation is delayed and the formation rate is decreased, and supercooled liquid water permeates from the CL into the MPL. For an MEA with relatively high hydrophobicity, the water permeation rate is high. These results can enable a PEMFC to start at subzero temperatures. The effect of ice crystallization kinetics is negligible when the fuel cell is started at -30 °C or below.

Microstructure Reconstruction and Multiphysics Dynamic Distribution Simulation of the Catalyst Layer in PEMFC.

Due to the complexity of both material composition and the structure of the catalyst layer (CL) used in the proton-exchange membrane fuel cell (PEMFC), conjugated heat and mass transfer as well as electrochemical processes simultaneously occur through the CL. In this study, a microstructure model of CL was first reconstructed using images acquired by Nano-computed tomography (Nano-CT) of a real sample of CL. Then, the multiphysics dynamic distribution (MPDD) simulation, which is inherently a multiscale approach made of a combination of pore-scale and homogeneous models, was conducted on the reconstructed microstructure model to compute the corresponded heat and mass transport, electrochemical reactions, and water phase-change processes. Considering a computational domain with the size of 4 um and cube shape, this model consisting of mass and heat transport as well as electrochemical reactions reached a stable solution within 3 s as the convergence time. In the presence of sufficient oxygen, proton conduction was identified as the dominant factor determining the strength of the electrochemical reaction. Additionally, it was concluded that current density, temperature, and the distribution of water all exhibit similar distribution trends, which decrease from the interface between CL and the proton-exchange membrane to the interface between CL and the gas-diffusion layer. The present study not only provides an in-depth understanding of the mass and heat transport and electrochemical reaction in the CL microstructure, but it also guides the optimal design and fabrication of CL components and structures, such as improving the local structure to reduce the number of dead pores and large agglomerates, etc.

Polyaniline-functionalized carbon nanotube supported platinum catalysts.

Electrocatalytically active platinum (Pt) nanoparticles on a carbon nanotube (CNT) with enhanced nucleation and stability have been demonstrated through introduction of electron-conducting polyaniline (PANI) to bridge the Pt nanoparticles and CNT walls with the presence of platinum-nitride (Pt-N) bonding and π-π bonding. The Pt colloids were prepared through ethanol reduction under the protection of aniline, the CNT was dispersed well with the existence of aniline in the solution, and aniline was polymerized in the presence of a protonic acid (HCl) and an oxidant (NH(4)S(2)O(8)). The synthesized PANI is found to wrap around the CNT as a result of π-π bonding, and highly dispersed Pt nanoparticles are loaded onto the CNT with narrowly distributed particle sizes ranging from 2.0 to 4.0 nm due to the polymer stabilization and existence of Pt-N bonding. The Pt-PANI/CNT catalysts are electroactive and exhibit excellent electrochemical stability and therefore promise potential applications in proton exchange membrane fuel cells.

Decoration of carbon nanotube with SiO2 nanoparticles to improve polyelectrolyte membrane performance.

To overcome the poor mechanical performance and the low proton conductivity at high temperature (> 80 degrees C) which hinder the utilization of Nafion membranes for use in PEM Fuel Cell, SiO2 nanoparticle decorated multi-walled carbon nanotubes (MWCNTs) were developed to reinforce both the mechanical property and the water retention capability of Nafion membranes. Results show that the composite membrane is approximately 10% and 5-10% higher than that of recast Nafion membrane in proton conductivity and water retention, respectively. These could be explained by the bifunction of SiO2 which performs both hydrophilicity and proton conductivity. In addition, the mechanical performance was greatly enhanced in the presence of SiO2 decorated MWCNTs.

Identification of the prognostic value of elevated ANGPTL4 expression in gallbladder cancer-associated fibroblasts.

BACKGROUND: Cancer-associated fibroblasts (CAFs) with different gene profiles from normal fibroblasts (NFs) have been implicated in tumor progression. Angiopoietin-like protein 4 (ANGPTL4) has been shown to regulate tumor angiogenesis and metastasis, and predict poor prognosis. However, the ANGPTL4 expression in CAFs, especially in gallbladder CAFs (GCAFs) and its relationship with patient prognosis is unclear. METHODS: Affymetrix gene profile chip analysis in vitro was performed to detect the different gene expression profiles between GCAFs and NFs. RT-qPCR, immunohistochemistry, and western blotting were performed to investigate the different expression levels of ANGPTL4 in GCAFs/NFs in vitro and in an in vivo nude mouse model of xenograft tumors. Finally, the ANGPTL4 expression was investigated in the stroma of different lesion tissues of the human gallbladder by immunohistochemistry, especially the expression in GCAFs in vivo by co-immunofluorescence, and their prognostic significance in patients with gallbladder cancer (GBC) was assessed. RESULTS: ANGPTL4 was upregulated in both GCAFs in vitro and in the xenograft stroma of nude mice in vivo, and its expression was also significantly upregulated in human GBC stroma co-localized with the interstitial markers fibroblast secreted protein-1 and α-smooth muscle actin. In addition, the elevated ANGPTL4 expression in GCAFs was correlated with tumor differentiation, liver metastasis, venous invasion and Nevin staging, and GBC patients with an elevated ANGPTL4 expression in GACFs were found to have a lower survival rate. CONCLUSIONS: Increased ANGPTL4 expression in GCAFs correlates with poor patient prognosis, which indicates a potential therapeutic target for human GBCs.

Insight into norcantharidin, a small-molecule synthetic compound with potential multi-target anticancer activities.

Norcantharidin (NCTD) is a demethylated derivative of cantharidin, which is an anticancer active ingredient of traditional Chinese medicine, and is currently used clinically as a routine anti-cancer drug in China. Clarifying the anticancer effect and molecular mechanism of NCTD is critical for its clinical application. Here, we summarized the physiological, chemical, pharmacokinetic characteristics and clinical applications of NCTD. Besides, we mainly focus on its potential multi-target anticancer activities and underlying mechanisms, and discuss the problems existing in clinical application and scientific research of NCTD, so as to provide a potential anticancer therapeutic agent for human malignant tumors.

Inhibition of autophagy by chloroquine enhances the antitumor activity of gemcitabine for gallbladder cancer.

Gemcitabine (GEM), as an anti-metabolic nucleoside analog, has been shown to have anticancer effects in various tumors, but its chemotherapy resistance is still an important factor leading to poor prognosis of cancer patient. A large number of studies in recent years have shown that autophagy plays an important role in the chemotherapy sensitivity of many tumors, including pancreatic, non-small cell lung, and bladder cancer. However, whether GEM causes autophagy in gallbladder cancer (GBC) and whether it is related to chemotherapy resistance is unknown. In the present study, we demonstrated that GEM induced apoptosis and protective autophagy in GBC cells, which may be related to the AKT/mTOR signaling pathway, and GEM in combination with autophagy inhibitor chloroquine can strengthen the cytotoxic effect of GEM on GBC in vitro and in vivo. These findings showed that both autophagy and AKT/mTOR signals were engaged in GBC cell death evoked by GEM, GBC patients might benefit from this new treatment strategy, and molecular targeted treatment in combination with autophagy inhibitors shows promise as a treatment improvement.