RESUMEN
COVID-19 pandemic-related restrictions for approximately three years have heavily influenced sensory evaluations. People have become accustomed to working remotely and communicating online. This has led to opportunities in sensory testing paired with logistics systems and information technologies, resulting in a wide application of the home-use test (HUT), wherein panelists evaluate samples from their homes or other off-site locations. This study aimed to compare three sensory evaluation conditions: a central location test (CLT, n = 104), a HUT (n = 120), and a no-contact HUT (N-HUT, n = 111). We recruited participants via the local community website, delivered samples using a delivery service, and conducted sensory testing using a smartphone for the N-HUT. Participants were requested to report the acceptance ratings, sensory profiles, and emotion responses to four coffee samples. Some differences in the acceptance ratings might be due to the different attitudes participating in the evaluation. In the sensory profiling of the samples, multi-factor analysis (MFA) revealed highly similar sensory characteristics across the three types of tests. All RV coefficients (RVs) among the test conditions were above 0.93. The emotion responses to coffee samples were similar among test conditions based on the MFA with RV values greater than 0.84. In conclusion, we found that N-HUT produced similar results regarding the descriptions of sensory profiles and emotions, indicating that N-HUT is a suitable test method for collecting sensory data and overcoming CLT and HUT's regional limitations. Modern logistics systems and information technologies make it possible to conduct nationwide sensory evaluations without in-person contact or participant attendance at sensory testing facilities.
RESUMEN
Due to the constraints of the COVID-19 pandemic, conducting sensory evaluations requiring direct interactions became challenging. In response, researchers have been motivated to devise non-face-to-face testing methods as alternatives. This study aimed to compare two non-face-to-face home-use tests (HUT) with the traditional face-to-face central location test (CLT). Both HUTs involved online recruitment and sample delivery to participants' homes. One HUT provided a written protocol with no direct interaction (contactless HUT; C-HUT), whereas the other included an online meeting with a researcher for live guidance (online HUT; O-HUT). Four coffee samples were evaluated on the basis of liking and sensory and emotional attributes. The comparison between CLT and O-HUT showed RV coefficients of 0.92, 0.93, and 0.98 (P < 0.05) for liking and sensory and emotional attributes, respectively. In addition, based on the RV coefficient, the CLT results showed a significantly greater similarity to those of O-HUT compared to those of C-HUT. The O-HUT also outperformed the C-HUT in its ability to significantly discriminate between samples. Hence, real-time interactions between researchers and participants, as facilitated by O-HUT, may be more suitable in certain scenarios compared to C-HUT, which relies solely on a written protocol. Overall, these findings suggest that C-HUT and O-HUT are suitable methods for collecting sensory data and overcoming geographic and face-to-face contact limitations, providing greater flexibility, and reducing the time and cost associated with traditional sensory evaluations.
Asunto(s)
COVID-19 , Café , Comportamiento del Consumidor , Humanos , Café/química , Masculino , Femenino , Adulto , COVID-19/epidemiología , Adulto Joven , Gusto , Persona de Mediana Edad , SARS-CoV-2 , Emociones , Preferencias Alimentarias , InternetRESUMEN
The effects of boiling water treatment on the physical properties of Quercus variabilis virgin cork (Qv VC) were examined and compared with those of Quercus suber reproduction cork (Qs RC). The water treatment was conducted at 100 °C for 1 h. Qv VC showed a significantly higher dimensional change in the three directions and lower weight loss than Qs RC by boiling water treatment. Untreated and boiled Qv VC showed higher density, air-dried moisture content, red/green (a*) and yellow/blue (b*) chromaticity, overall color change, shrinkage in all three directions, moisture adsorption on the entire surface, and swelling per 1% moisture content than untreated and boiled Qs RC. However, the lightness (L*) and water absorption on each surface were higher for Qs RC than for Qv VC. Moisture adsorption on each surface was comparable before and after heat treatment for both species. After boiling water treatment, the air-dried moisture content, dimensions, volume shrinkage, water absorption, and moisture adsorption on each surface and the entire surface increased, whereas L*, a*, b*, and swelling per 1% moisture content decreased. The results of the present study could be useful for further utilization of Qv cork growing in Korea.
Asunto(s)
Hipertermia Inducida , Quercus , Fenómenos Físicos , Adsorción , Factores de Transcripción , Agua , República de CoreaRESUMEN
The increasing trend of integrating robots into the food industry has sparked debates regarding their potential influence on consumer attitudes toward food technology. This study investigated volatile compound profiles via gas chromatography-mass spectrometry (GC-MS), consumer acceptability, sensory profiling, and emotional responses of consumers toward coffee samples brewed by robot and human baristas. Moreover, the effect of the robot experience on food technology neophobia (FTN) was investigated. The principal component analysis of the volatile compound profiles revealed that the samples by the robot barista exhibited a higher degree of similarity compared to those prepared by the human barista. The range of relative standard deviations of volatile compounds from the robot barista brewed coffee was 1.4-83.1% and the variation was smaller than that of the human barista, which was 5.0-118.3%. Participants had a significant decrease in FTN scores after evaluating the robot-brewed coffee (p < 0.05), but there was no significant difference in FTN scores before and after evaluating the coffee brewed by the human barista (p > 0.05). Sensory evaluation studies revealed no significant differences in acceptability ratings and purchase intentions between the two groups (p > 0.05). However, emotional responses to the coffee samples significantly varied, with the robot-brewed coffee inducing more dynamic and positive emotions and the human-brewed coffee inducing more static and positive emotions (p < 0.05). Overall, this study provides valuable insights into consumer attitudes toward food robot service to humans and indicates that consumer's experience with food robots may significantly reduce FTN (p < 0.001).
Asunto(s)
Trastorno de la Ingesta Alimentaria Evitativa/Restrictiva , Robótica , Humanos , Café , Alimentos , EmocionesRESUMEN
Paulownia tomentosa, a tree species that allows for efficient production of translucent wood, was selected as an experimental wood species in this study, and a two-step process of delignification and polymer impregnation was performed. For delignification, 2-4 mm thick specimens were immersed in peracetic acid for 8 h. The delignified-wood specimens were impregnated using epoxy, a commercial transparent polymer. To identify the characteristics of the resulting translucent wood, the transmittance and haze of each type of wood section (cross- and tangential) were measured, while bending strength was measured using a universal testing machine. The translucent wood varied in properties according to the wood section, and the total transmittance and haze were 88.0% and 78.5% for the tangential section and 91.3% and 96.2% for the cross-section, respectively. For the bending strength, untreated wood showed values of approximately 4613.5 MPa modulus of elasticity (MOE), while the epoxy impregnation to improve the strength of the wood had increased the MOE up to approximately 6089.9 MPa, respectively. A comparative analysis was performed in this study with respect to the substitution of balsa, which is used widely in the production of translucent wood. The results are anticipated to serve as baseline data for the functionalization of translucent wood.
RESUMEN
Hypertension, causing cardiovascular disease, stroke, and heart failure, has been a rising health issue worldwide. Black soybeans and adzuki beans have been widely consumed throughout history due to various bioactive components. We evaluated the antihypertensive effects of black soybean and adzuki bean ethanol extracts on blood pressure, renin-angiotensin system (RAS), and aortic lesion in spontaneously hypertensive rats. A group of WKY (normal) and six groups of spontaneously hypertensive rats were administered with saline (SHR), 50 mg/kg of captopril (CAP), 250 and 500 mg/kg of black soybean extracts (BE250 and BE500), 250 and 500 mg/kg of adzuki bean extracts (AE250 and AE500) for eight weeks. BE250, BE500, AE250, and AE500 significantly (p < 0.05) reduced relative liver weight, AST, ALT, triglyceride, total cholesterol, systolic blood pressure, and angiotensin-converting-enzyme level compared to SHR. The angiotensin II level in AE500 and renin mRNA expression in BE500 and AE500 were significantly (p < 0.05) decreased compared to SHR. The lumen diameter was significantly (p < 0.05) reduced in only CAP. Furthermore, systolic and diastolic blood pressure and angiotensin II level in AE500 were lower than those of BE500. These results suggest that AE exhibit more antihypertensive potential than BE in spontaneously hypertensive rats.
RESUMEN
This study was conducted to investigate the degradation characteristics of kraft lignin (KL) during peracetic acid (PAA) treatment, and to produce potentially valuable polymers of low molecular weight lignin by controlling the reaction conditions. For the peracetic acid treatment, acetic acid (AA) and hydrogen peroxide (HP) were directly mixed at ratios of 4:1, 1:1, and 1:4 (v/v) and employed as reaction media. After PAA treatment of kraft lignin at 80 °C, complete dissolution of the lignin and reduction in the molecular weight were observed. When the PAA reaction was performed at high HP concentration (1:4, v/v), the aromatic lignin skeleton opened and converted to a structure containing large amounts of carboxyl groups. On the other hand, the treatment at high AA concentration (4:1, v/v) decomposed lignin while maintaining its aromatic structure. Hence, we demonstrated that the selective production of lignin-derived polymers can be controlled depending on PAA and HP concentrations.
Asunto(s)
Biopolímeros/química , Lignina/química , Ácido Peracético/farmacología , Fraccionamiento Químico , Fenómenos Químicos , Modelos Químicos , Peso Molecular , Ácido Peracético/química , Solubilidad/efectos de los fármacos , Solventes/química , Análisis EspectralRESUMEN
For improving the economic efficiency of the biorefining concept, selective decomposition and separation of biomass components is indispensable. In this respect, a sequential pretreatment process consisting of liquid hot water treatment and diluted peracetic acid (PAA) treatment was proposed for total utilization of lignocellulosic woody biomass. During the liquid hot water treatment, hemicellulose can be decomposed efficiently without significant loss of cellulose and lignin, implying the possibility for xylooligomer production by thermochemical treatment. In the PAA treatment, lignin was successfully degraded and liquefied using a 50% diluted PAA solvent, suggesting the possibility of dicarboxylic acid production. After the sequential process proposed in this study, the cellulose accessibility to the enzyme could be maximized by inducing selective deconstruction of hemicellulose and lignin.
Asunto(s)
Lignina , Polisacáridos , Biomasa , HidrólisisRESUMEN
This study was carried out to better understand the characteristic modification mechanisms of monolignols by enzyme system of Abortiporus biennis and to induce the degradation of monolignols. Degradation and polymerization of monolignols were simultaneously induced by A. biennis. Whole cells of A. biennis degraded coniferyl alcohol to vanillin and coniferyl aldehyde, and degraded sinapyl alcohol to 2,6-dimethoxybenzene- 1,4-diol, with the production of dimers. The molecular weight of monolignols treated with A. biennis increased drastically. The activities of lignin degrading enzymes were monitored for 24 h to determine whether there was any correlation between monolignol biomodification and ligninolytic enzymes. We concluded that complex enzyme systems were involved in the degradation and polymerization of monolignols. To degrade monolignols, ascorbic acid was added to the culture medium as a reducing agent. In the presence of ascorbic acid, the molecular weight was less increased in the case of coniferyl alcohol, while that of sinapyl alcohol was similar to that of the control. Furthermore, the addition of ascorbic acid led to the production of various degraded compounds: syringaldehyde and acid compounds. Accordingly, these results demonstrated that ascorbic acid prevented the rapid polymerization of monolignols, thus stabilizing radicals generated by enzymes of A. biennis. Thereafter, A. biennis catalyzed the oxidation of stable monolignols. As a result, ascorbic acid facilitated predominantly monolignols degradation by A. biennis through the stabilization of radicals. These findings showed outstanding ability of A. biennis to modify the lignin compounds rapidly and usefully.
Asunto(s)
Basidiomycota/efectos de los fármacos , Basidiomycota/metabolismo , Lignina/metabolismo , Sustancias Reductoras/farmacología , Acroleína/análogos & derivados , Acroleína/metabolismo , Ácido Ascórbico/farmacología , Basidiomycota/enzimología , Benzaldehídos/metabolismo , Medios de Cultivo/química , Lignina/química , Estructura Molecular , Peso Molecular , Fenoles/metabolismo , Fenilpropionatos/metabolismo , PolimerizacionRESUMEN
In this study, the monoterpenes, α-pinene and geraniol, were biotransformed to synthesize monoterpene alcohol compounds. Polyporus brumalis which is classified as a white rot fungus was used as a biocatalyst. Consequently α-terpineol was synthesized from α-pinene by P. brumalis mycelium, after three days. Moreover, another substrate, the acyclic monoterpenoids geraniol was transformed into the cyclic compound, p-menthane-3, 8-diol (PMD). The main metabolites, i.e., α-terpineol and PMD, are known to be bioactive monoterpene alcohol compounds. This study highlights the potential of fungal biocatalysts for monoterpene transformation.