Engineering Screw Dislocations in Covalent Organic Frameworks.

We report the application of a Pictet-Spengler reaction to the synthesis of covalent organic frameworks (COFs) using functionalized terephthalaldehydes. The COFs produced show an increased propensity to generate screw dislocations and produce multilayered flakes when compared with other 2D-COFs. Using HRTEM, definitive evidence for screw dislocations was obtained and is presented. The effects on separations using these materials in membranes are also reported.

Computationally directed manipulation of cross-linked covalent organic frameworks for membrane applications.

Two-dimensional covalent organic frameworks (2D-COFs) exhibit characteristics ideal for membrane applications, such as high stability, tunability and porosity along with well-ordered nanopores. However, one of the many challenges with fabricating these materials into membranes is that membrane wetting can result in layer swelling. This allows molecules that would be excluded based on pore size to flow around the layers of the COF, resulting in reduced separation. Cross-linking between these layers inhibits swelling to improve the selectivity of these membranes. In this work, computational models were generated for a quinoxaline-based COF cross-linked with oxalyl chloride (OC) and hexafluoroglutaryl chloride (HFG). Enthalpy of formation and cohesive energy calculations from these models show that formation of these COFs is thermodynamically favorable and the resulting materials are stable. The cross-linked COF with HFG was synthesized and characterized with Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis with differential scanning calorimetry (TGA-DSC), and water contact angles. Additionally, these frameworks were fabricated into membranes for permeance testing. The experimental data supports the presence of cross-linking and demonstrates that varying the amount of HFG used in the reaction does not change the amount of cross-linking present. Computational models indicate that varying the cross-linking concentration has a negligible effect on stability and less cross-linking still results in stable materials. This work sheds light on the nature of the cross-linking in these 2D-COFs and their application in membrane technologies.

Photosensitization of Single-Crystal Oxide Substrates with Quantum Confined Semiconductors.

Dye-sensitized solar cells have been studied for many years as a potential inexpensive and scalable alternative to silicon solar cells. They have recently expanded their list of photosensitizers to include quantum dots. In recent years, there has been substantial progress in the field of quantum dot solar cells, with certified efficiencies now reaching 13.4%. Fundamental studies on nanomaterial/semiconductor electrode coupling have led to a deeper understanding of photoinduced electron-transfer processes that are important for both of these devices. This Feature Article will highlight the use of a model system, nanomaterials sensitizing single-crystal oxide substrates, that is useful for investigating how changes in nanomaterial shape, dimensionality, size, and local environment affect the photoinduced charge separation efficiency.

A Highly Ordered Nanoporous, Two-Dimensional Covalent Organic Framework with Modifiable Pores, and Its Application in Water Purification and Ion Sieving.

The preparation of membranes with high selectivity based on specific chemical properties such as size and charge would impact the efficiency of the world's energy supply, the production of clean water, and many other separation technologies. We report a flexible synthetic protocol for preparing highly ordered two-dimensional nanoporous polymeric materials (termed covalent organic frameworks or COFs) that allow for placing virtually any function group within the nanopores. We demonstrate that membranes, fabricated with this new family of materials with carboxylated pore walls, are very water permeable, as well as highly charged and size selective.

Nanostructured Ternary FeCrAl Oxide Photocathodes for Water Photoelectrolysis.

A sol-gel method for the synthesis of semiconducting FeCrAl oxide photocathodes for solar-driven hydrogen production was developed and applied for the production of meso- and macroporous layers with the overall stoichiometry Fe0.84Cr1.0Al0.16O3. Using transmission electron microscopy and energy-dispersive X-ray spectroscopy, phase separation into Fe- and Cr-rich phases was observed for both morphologies. Compared to prior work and to the mesoporous layer, the macroporous FeCrAl oxide photocathode had a significantly enhanced photoelectrolysis performance, even at a very early onset potential of 1.1 V vs RHE. By optimizing the macroporous electrodes, the device reached current densities of up to 0.68 mA cm(-2) at 0.5 V vs RHE under AM 1.5 with an incident photon-to-current efficiency (IPCE) of 28% at 400 nm without the use of catalysts. Based on transient measurements, this performance increase could be attributed to an improved collection efficiency. At a potential of 0.75 V vs RHE, an electron transfer efficiency of 48.5% was determined.

Interfacial morphology and photoelectrochemistry of conjugated polyelectrolytes adsorbed on single crystal TiO2.

The nanoscale morphology and photoactivity of conjugated polyelectrolytes (CPEs) deposited from different solvents onto single crystal TiO(2) were investigated with atomic force microscopy (AFM) and photocurrent spectroscopy. CPE surface coverages on TiO(2) could be incremenentally increased by adsorbing the CPEs from static solutions. The solvents used for polymer adsorption influenced the surface morpohology of the CPEs on the TiO(2) surface. Photocurrent spectroscopy measurements in aqueous electrolytes, using iodide as a hole scavenger, revealed that the magnitude of the sensitized photocurrents was related to the surface coverages and the degree of aggregation of the CPEs as determined by AFM imaging. Absorbed photon-to-current efficiencies approaching 50% were measured for CPE layers as thick as 4 nm on TiO(2). These results suggest that precise control of CPE morphology at the TiO(2) interface can be achieved through optimization of the deposition conditions to improve the power conversion efficiencies of polymer-sensitized solar cells.

Synthesis, Postsynthetic Modifications, and Applications of the First Quinoxaline-Based Covalent Organic Framework.

We report a new synthetic protocol for preparing highly ordered two-dimensional nanoporous covalent organic frameworks (2D-COFs) based on a quinoxaline backbone. The quinoxaline framework represents a new type of COF that enables postsynthetic modification by placing two different chemical functionalities within the nanopores including layer-to-layer cross-linking. We also demonstrate that membranes fabricated using this new 2D-COF perform highly selective separations resulting in dramatic performance enhancement post cross-linking.

The Influence of Disorder in the Synthesis, Characterization and Applications of a Modifiable Two-Dimensional Covalent Organic Framework.

Two-dimensional covalent organic frameworks (2D-COFs) have been of increasing interest in the past decade due to their porous structures that ideally can be highly ordered. One of the most common routes to these polymers relies on Schiff-base chemistry, i.e., the condensation reaction between a carbonyl and an amine. In this report, we elaborate on the condensation of 3,6-dibromobenzene-1,2,4,5-tetraamine with hexaketocyclohexane (HKH) and the subsequent carbonylation of the resulting COF, along with the possibility that the condensation reaction on HKH can result in a trans configuration resulting in the formation of a disordered 2D-COF. This strategy enables modification of COFs via bromine substitution reactions to place functional groups within the pores of the materials. Ion-sieving measurements using membranes from this COF, reaction of small molecules with unreacted keto groups along with modeling studies indicate disorder in the COF polymerization process. We also present a Monte Carlo simulation that demonstrates the influence of even small amounts of disorder upon both the 2D and 3D structure of the resulting COF.

Solution-based synthesis and characterization of Cu2ZnSnS4 nanocrystals.

Recent advances have been made in thin-film solar cells using CdTe and CuIn(1-x)Ga(x)Se(2) (CIGS) nanoparticles, which have achieved impressive efficiencies. Despite these efficiencies, CdTe and CIGS are not amenable to large-scale production because of the cost and scarcity of Te, In, and Ga. Cu(2)ZnSnS(4) (CZTS), however, is an emerging solar cell material that contains only earth-abundant elements and has a near-optimal direct band gap of 1.45-1.65 eV and a large absorption coefficient. Here we report the direct synthesis of CZTS nanocrystals using the hot-injection method. In-depth characterization indicated that pure stoichiometric CZTS nanocrystals with an average particle size of 12.8 +/- 1.8 nm were formed. Optical measurements showed a band gap of 1.5 eV, which is optimal for a single-junction solar device.

Spectral Sensitization of n- and p-Type Gallium Phosphide Single Crystals with Single-Walled Semiconducting Carbon Nanotubes.

The spectral sensitization of single-crystal p-GaP by semiconducting single-walled carbon nanotubes (s-SWCNT) via hole injection into the p-GaP valence band is reported. The results are compared to SWNCT sensitized n-type single-crystal substrates: TiO2, SnO2, and n-GaP. It was found that the sensitized photocurrents from CoMoCAT and HiPco s-SWCNTs were from a hole injection mechanism on all substrates, even when electron injection into the conduction band should be energetically favored. The results suggest an intrinsic p-type character of the s-SWCNTs surface films investigated in this work.

Self-organized twist-heterostructures via aligned van der Waals epitaxy and solid-state transformations.

Vertical van der Waals (vdW) heterostructures of 2D crystals with defined interlayer twist are of interest for band-structure engineering via twist moiré superlattice potentials. To date, twist-heterostructures have been realized by micromechanical stacking. Direct synthesis is hindered by the tendency toward equilibrium stacking without interlayer twist. Here, we demonstrate that growing a 2D crystal with fixed azimuthal alignment to the substrate followed by transformation of this intermediate enables a potentially scalable synthesis of twisted heterostructures. Microscopy during growth of ultrathin orthorhombic SnS on trigonal SnS2 shows that vdW epitaxy yields azimuthal order even for non-isotypic 2D crystals. Excess sulfur drives a spontaneous transformation of the few-layer SnS to SnS2, whose orientation - rotated 30° against the underlying SnS2 crystal - is defined by the SnS intermediate rather than the substrate. Preferential nucleation of additional SnS on such twisted domains repeats the process, promising the realization of complex twisted stacks by bottom-up synthesis.

Elucidation of Titanium Dioxide Nucleation and Growth on a Polydopamine-Modified Nanoporous Polyvinylidene Fluoride Substrate via Low-Temperature Atomic Layer Deposition.

Interfaces combining polydopamine (PDA) and nanoparticles have been widely utilized for fabricating hybrid colloidal particles, thin films, and membranes for applications spanning biosensing, drug delivery, heavy metal detection, antifouling membranes, and lithium ion batteries. However, fundamental understanding of the interaction between PDA and nanoparticles is still limited, especially the impact of PDA on nanoparticle nucleation and growth. In this work, PDA is used to generate functional bonding sites for depositing titanium dioxide (TiO2) via atomic layer deposition (ALD) onto a nanoporous polymer substrate for a range of ALD cycles (<100). The resulting hybrid membranes are systematically characterized using water contact angle, scanning electron microscopy, atomic force microscopy, nitrogen adsorption and desorption, and X-ray photoelectron spectroscopy (XPS). An intriguing nonlinear relationship was observed between the number of ALD cycles and changes in surface properties (water contact angle and surface roughness). Together with XPS study, those changes in surface properties were exploited to probe the nanoparticle nucleation and growth process on complex PDA-coated porous polymer substrates. Molecular level understanding of inorganic and polymer material interfaces will shed light on fine-tuning nanoparticle-modified polymeric membrane materials.

Optically Generated Free-Carrier Collection from an All Single-Walled Carbon Nanotube Active Layer.

Semiconducting single-walled carbon nanotubes' (SWCNTs) broad absorption range and all-carbon composition make them attractive materials for light harvesting. We report photoinduced charge transfer from both multichiral and single-chirality SWCNT films into atomically flat SnO2 and TiO2 crystals. Higher-energy second excitonic SWCNT transitions produce more photocurrent, demonstrating carrier injection rates are competitive with fast hot-exciton relaxation processes. A logarithmic relationship exists between photoinduced electron-transfer driving force and photocarrier collection efficiency, becoming more efficient with smaller diameter SWCNTs. Photocurrents are generated from both conventional sensitization and in the opposite direction with the semiconductor under accumulation and acting as an ohmic contact with only the p-type nanotubes. Finally, we demonstrate that SWCNT surfactant choice and concentration play a large role in photon conversion efficiency and present methods of maximizing photocurrent yields.

Synthesis and Characterization of Ultrathin Silver Sulfide Nanoplatelets.

We report the synthesis of ultrathin silver sulfide (Ag2S) nanoplatelets (NPLs) synthesized via a one-pot method in ethylene glycol with 3-mercaptopropionic acid serving as both the sulfur precursor and the platelet ligand. The colloidally synthesized nanoplatelets are exceptionally thin, with a thickness of only 3.5 ± 0.2 Å and a 1S exciton Bohr diameter to confinement ratio of ∼12.6. The NPL growth is shown to be quantized by layer thickness using absorption and photoluminescence (PL) spectroscopy. Transmission electron microscopy, atomic force microscopy, and X-ray diffraction analyses of the NPLs show that they correspond to the (202) plane of the ß-Ag2S structure. The PL quantum yield of these NPLs is ∼30%, suggesting their potential use in biomedical imaging. Optoelectronic properties were evaluated via sensitized photocurrent spectroscopy with the resulting spectra closely matching the distinctive absorption spectral shape of the Ag2S NPLs.

Synthesis of fullerene-like tantalum disulfide nanoparticles by a gas-phase reaction and laser ablation.

Motivated by the discovery of the C(60) molecule (buckminsterfullerene), the search for inorganic counterparts of this closed-cage nanostructure started in 1992 with the discovery of nested fullerene-like nanoparticles of WS(2). Inorganic fullerene-like (IF) materials have since been found in numerous two-dimensional compounds and are available in a variety of shapes that offer major applications such as in lubricants and nanocomposites. Various synthetic methodologies have been employed to achieve the right conditions for the constricted or templated growth needed for the occurrence of this new phase. In this study, IF-TaS(2) is produced from a volatile chloride precursor in the gas phase and in small yield by room temperature laser ablation both in argon and in liquid CS(2). For the gas-phase reaction, a high yield of IF nanoparticles was obtained between 400 and 600 degrees C with a low concentration of the precursor gas. The average size and the yield of the IF-TaS(2) nanoparticles decrease with temperature. Above 600 degrees C, IF nanoparticles were found in low yields and at sizes below 20 nm. The stability of the IF nanoparticles produced by the gas-phase reaction is discussed in the light of two existing theoretical models. Laser ablation in argon leads to IF nanoparticles filled with clusters of TaS(2). Agglomeration of the nanoparticles can be avoided by laser ablation in liquid CS(2).

Combinatorial Investigations of High Temperature CuNb Oxide Phases for Photoelectrochemical Water Splitting.

High-throughput combinatorial methods have been useful in identifying new oxide semiconductors with the potential to be applied to solar water splitting. Most of these techniques have been limited to producing and screening oxide phases formed at temperatures below approximately 550 °C. We report the development of a combinatorial approach to discover and optimize high temperature phases for photoelectrochemical water splitting. As a demonstration material, we chose to produce thin films of high temperature CuNb oxide phases by inkjet printing on two different substrates: fluorine-doped tin oxide and crystalline Si, which required different sample pyrolysis procedures. The selection of pyrolysis parameters, such as temperature/time programs, and the use of oxidizing, nonreactive or reducing atmospheres determines the composition of the thin film materials and their photoelectrochemical performance. XPS, XRD, and SEM analyses were used to determine the composition and oxidation states within the copper niobium oxide phases and to then guide the production of target Cu(1+)Nb(5+)-oxide phases. The charge carrier dynamics of the thin films produced by the inkjet printing are compared with pure CuNbO3 microcrystalline material obtained from inorganic bulk synthesis.

Fe-Cr-Al containing oxide semiconductors as potential solar water-splitting materials.

A high-throughput thin film materials library for Fe-Cr-Al-O was obtained by reactive magnetron cosputtering and analyzed with automated EDX and XRD to elucidate compositional and structural properties. An automated optical scanning droplet cell was then used to perform photoelectrochemical measurements of 289 compositions on the library, including electrochemical stability, potentiodynamic photocurrents and photocurrent spectroscopy. The photocurrent onset and open circuit potentials of two semiconductor compositions (n-type semiconducting: Fe51Cr47Al2Ox, p-type semiconducting Fe36.5Cr55.5Al8Ox) are favorable for water splitting. Cathodic photocurrents are observed at 1.0 V vs RHE for the p-type material exhibiting an open circuit potential of 0.85 V vs RHE. The n-type material shows an onset of photocurrents at 0.75 V and an open circuit potential of 0.6 V. The p-type material showed a bandgap of 1.55 eV, while the n-type material showed a bandgap of 1.97 eV.

Formation of nanooctahedra in molybdenum disulfide and molybdenum diselenide using pulsed laser vaporization.

Pulsed laser vaporization has been used to produce nanooctahedra of MoS2 and MoSe2. The nanooctahedra primarily form in two- or three-layer nested octahedra, although nesting up to five layers has been observed. Tilting the TEM sample stage and mapping how the images of single particles transformed provided the evidence to verify their octahedral geometry. Analysis of 30 two- and three-layered octahedra showed that their outer edge lengths clustered at approximately 3.8 nm and approximately 5.1 nm, respectively. This discreet sizing and the high symmetry of these closed nanooctahedra represent the closest inorganic analogy yet to the carbon fullerenes. The geometrical implications for forming octahedra from these layered compounds are investigated by considering different atomic arrangements assuming either trigonal prismatic or octahedral coordination around the Mo atom and yields two possible configurations for the actual structure of the nanooctahedra. A preliminary survey of pulsed laser vaporization of other layered metal chalcogenides shows that these dichalcogenides differ in their tendency to form small closed layered fullerene-like structures. These materials can be ranked from highest tendency to lowest as follows: NbSe2, WS2, WSe2, SnS2, TaS2, GaS, ReS2, and MoTe2.

Size selective photoetching of CdSe quantum dot sensitizers on single-crystal TiO2.

Cadmium selenide quantum dots covalently attached to and photosensitizing single-crystal TiO2 surfaces are observed to corrode under illumination in aqueous electrolyte containing iodide as a regenerator. Comparison of photocurrent spectra before and after long-term monochromatic illumination indicated that the CdSe QD sensitizers photocorroded and decreased in size until their band gap energy exceeded the excitation energy. This wavelength-dependent photoelectrochemical etching mechanism can be used to tune the size distribution of surface adsorbed QDs and may account for the instability of QD sensitized solar cells that do not employ sulfide-based electrolytes.

Tin disulfide-an emerging layered metal dichalcogenide semiconductor: materials properties and device characteristics.

Layered metal dichalcogenides have attracted significant interest as a family of single- and few-layer materials that show new physics and are of interest for device applications. Here, we report a comprehensive characterization of the properties of tin disulfide (SnS2), an emerging semiconducting metal dichalcogenide, down to the monolayer limit. Using flakes exfoliated from layered bulk crystals, we establish the characteristics of single- and few-layer SnS2 in optical and atomic force microscopy, Raman spectroscopy and transmission electron microscopy. Band structure measurements in conjunction with ab initio calculations and photoluminescence spectroscopy show that SnS2 is an indirect bandgap semiconductor over the entire thickness range from bulk to single-layer. Field effect transport in SnS2 supported by SiO2/Si suggests predominant scattering by centers at the support interface. Ultrathin transistors show on-off current ratios >10(6), as well as carrier mobilities up to 230 cm(2)/(V s), minimal hysteresis, and near-ideal subthreshold swing for devices screened by a high-k (deionized water) top gate. SnS2 transistors are efficient photodetectors but, similar to other metal dichalcogenides, show a relatively slow response to pulsed irradiation, likely due to adsorbate-induced long-lived extrinsic trap states.