RESUMEN
BACKGROUND: Zygomatic implants are widely used in the rehabilitation of severely atrophic maxillae, but implant placement is not without risks, and it can potentially cause damage to related anatomical structures. The aim of this study was to perform a comparative analysis of the accuracy of static navigation systems in placing zygomatic dental implants in comparison to dynamic navigation systems. METHODS: Sixty zygomatic dental implants were randomly allocated to one of three study groups, categorized by which implant placement strategy was used: A: computer-aided static navigation system (n = 20) (GI); B: computer-aided dynamic navigation system (n = 20) (NI); or C: free-hand technique (n = 20) (FHI). For the computer-aided study groups, a preoperative cone-beam computed tomography (CBCT) scan of the existing situation was performed in order to plan the approach to be used during surgery. Four zygomatic dental implants were inserted in each of fifteen polyurethane stereolithographic models (n = 15), with a postoperative CBCT scan taken after the intervention. The pre- and postoperative CBCT scans were then uploaded to a software program used in dental implantology to analyze the angular deviations, apical end point, and coronal entry point. Student's t-test was used to analyze the results. RESULTS: The results found statistically significant differences in apical end-point deviations between the FHI and NI (p = 0.0053) and FHI and GI (p = 0.0004) groups. There were also statistically significant differences between the angular deviations of the FHI and GI groups (p = 0.0043). CONCLUSIONS: The manual free-hand technique may enable more accurate placement of zygomatic dental implants than computer-assisted surgical techniques due to the different learning curves required for each zygomatic dental implant placement techniques.
Asunto(s)
Implantes Dentales , Cirugía Asistida por Computador , Humanos , Cirugía Asistida por Computador/métodos , Implantación Dental Endoósea , Computadores , Programas Informáticos , Tomografía Computarizada de Haz Cónico , Diseño Asistido por Computadora , Imagenología TridimensionalRESUMEN
Platelet-rich fibrin (PRF) is a second-generation platelet concentrate whose use in clinical practice has been widely disseminated. This has led to the development of several commercial protocols, creating great confusion as to the terminology and implications of each of them. This integrative review aims to identify the critical factors of each of the phases of the solid-based PRF matrix protocol and their possible influence on their macro- and microscopic characteristics. An electronic search of the MEDLINE database (via PubMed), Web of Science, Scopus, LILACS, and OpenGrey was carried out. The search was temporarily restricted from 2001 to 2022. After searching, 43 studies were included that met the established criteria. There were numerous factors to consider in the PRF protocol, such as the material of the blood collection tubes, the duration of phlebotomy, the parameters related to blood centrifugation, the time from centrifugation to dehydration of the fibrin clots and their dehydration into membranes, as well as the time to clinical use. These factors influenced the macro- and microscopic characteristics of the PRF and its physical properties, so knowledge of these factors allows for the production of optimised PRF by combining the protocols and materials.
Asunto(s)
Fibrina Rica en Plaquetas , Cirugía Bucal , Humanos , Deshidratación , Leucocitos , PlaquetasRESUMEN
Background: Analyze and compare the accuracy of zygomatic dental implant placement carried out using a static navigation surgery, a dynamic navigation surgery and an augmented reality appliance. Material and Methods: Eighty (80) zygomatic dental implants were randomly assigned to one of four study groups: A: static navigation implant surgery (n = 20) (GI); B: dynamic navigation implant surgery (n = 20) (NI); C: augmented reality appliance implant placement (n = 20) (ARI) and D: free hand technique (n = 20) (FHI). A preoperative cone-beam computed tomography (CBCT) scan of the existing situation was performed to plan the surgical approach for the computer assisted implant surgery study groups. Four zygomatic dental implants were placed in anatomical-based polyurethane models (n = 20) manufactured by stereolithography, and a postoperative CBCT scan was taken. Subsequently, the preoperative planning and postoperative CBCT scans were uploaded to dental implant software to analyze the coronal global, apical global, and angular deviations. Results were analyzed using linear regression models with repeated measures to assess the differences according to the group, according to the position, and the interaction between both variables. If statistically significant differences were detected, 2-to-2 comparisons were made between the groups/positions. Results: The results did not show statistically significant differences between the coronal global deviations of GI (5.54 ± 1.72 mm), NI (5.43 ± 2.13 mm), ARI (5.64 ± 1.11 mm) and FHI (4.75 ± 1.58 mm). However, showed statistically significant differences between the apical global deviations of FHI (3.20 ± 1.45 mm) and NI (4.92 ± 1.89 mm) (p = 0.0078), FHI and GI (5.33 ± 2.14 mm) (p = 0.0005) and FHI and ARI (4.88 ± 1.54 mm) (p = 0.0132). In addition, the results showed also statistically significant differences between the angular deviations of FHI (8.47º ± 4.40º) and NI (7.36º ± 4.12º) (p = 0.0086) and between GI (5.30º ± 2.80º) and ARI (9.60º ± 4.25º) (p = 0.0005). Conclusions: Free-hand technique provides greater accuracy of zygomatic dental implant placement than computer-assisted implant surgical techniques, and zygomatic dental implants placed in the anterior region are more accurate than in the posterior region. However, it is an in vitro study and further clinical studies must be conducted to extrapolate the results to the clinical setting. Key words:Implantology, computer assisted implant surgery, image-guided surgery, augmented reality, navigation surgery, zygomatic implants.
RESUMEN
BACKGROUND: To date, no studies on the combined use of photodynamic therapy (PDT) and chitosan against peri-implantitis have been published. The aim of this study was to evaluate the possible synergistic antimicrobial effect of PDT and chitosan on the titanium-adherent biofilms of Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. METHODS: A total of 60 titanium discs were included in this study. The discs were randomized into three bacterial contaminations (n = 20 discs per bacterium). After being cultured (incubated for 48 hours) they were randomized again into four different disinfection modalities (n = 5 discs per treatment): control (without treatment), PDT, chitosan 3 mg/mL, and PDT + chitosan 3 mg/mL. After the treatments, the colony forming units (CFU) were measured to determine antimicrobial effects, and field emission scanning electron microscopy (FESEM) was used to study cell morphology and titanium adherence. RESULTS: For all the evaluated bacteria and all the variables studied the order from highest to lowest antimicrobial effectiveness was: PDT + chitosan 3 mg/mL > chitosan 3 mg/mL > PDT > control. Although, all disinfection methods were significantly effective when compared to control, the combined treatment of PDT + chitosan 3 mg/mL had the greatest antimicrobial effect against the three studied bacteria. CONCLUSIONS: The combination of PDT and chitosan has a synergistic antimicrobial effect against the bacteria S. aureus, E. coli, and P. aeruginosa, all closely related to peri-implantitis. However, further in vivo studies are needed because this study provides data based on an in vitro scenario that might not be extrapolated to patients with peri-implantitis.
Asunto(s)
Antiinfecciosos , Quitosano , Periimplantitis , Fotoquimioterapia , Antibacterianos/farmacología , Antiinfecciosos/farmacología , Antiinfecciosos/uso terapéutico , Biopelículas , Quitosano/farmacología , Escherichia coli , Humanos , Periimplantitis/tratamiento farmacológico , Fotoquimioterapia/métodos , Pseudomonas aeruginosa , Staphylococcus aureus , Titanio/farmacologíaRESUMEN
The objective of this in vitro study was to evaluate and compare the accuracy of zygomatic dental implant (ZI) placement carried out using a dynamic navigation system. Materials and Methods: Forty (40) ZIs were randomly distributed into one of two study groups: (A) ZI placement via a computer-aided dynamic navigation system (n = 20) (navigation implant (NI)); and (B) ZI placement using a conventional free-hand technique (n = 20) (free-hand implant (FHI)). A cone-beam computed tomography (CBCT) scan of the existing situation was performed preoperatively to plan the surgical approach for the computer-aided study group. Four zygomatic dental implants were placed in anatomically based polyurethane models (n = 10) manufactured by stereolithography, and a postoperative CBCT scan was performed. Subsequently, the preoperative planning and postoperative CBCT scans were added to dental implant software to analyze the coronal entry point, apical end point, and angular deviations. Results were analyzed using the Student's t-test. Results: The results showed statistically significant differences in the apical end-point deviations between FHI and NI (p = 0.0018); however, no statistically significant differences were shown in the coronal entry point (p = 0.2617) or in the angular deviations (p = 0.3132). Furthermore, ZIs placed in the posterior region showed more deviations than the anterior region at the coronal entry point, apical end point, and angular level. Conclusions: The conventional free-hand technique enabled more accurate placement of ZIs than the computer-assisted surgical technique. In addition, placement of ZIs in the anterior region was more accurate than that in the posterior region.
RESUMEN
Purpose: No published research has compared patients' quality of life and satisfaction with fixed prostheses supported by zygomatic implants with those supported by all-on-four prostheses. The aim of this study was to evaluate patients' quality of life and satisfaction with fixed prostheses on zygomatic implants compared with the all-on-four concept. Materials and Methods: A total of 80 patients with atrophic edentulous maxillae were randomized into two groups: Group 1 (rehabilitated with fixed prostheses supported by 2-4 zygomatic and 2-4 conventional implants in the anterior region) and Group 2 (fixed prostheses on four implants in the anterior region following an all-on-four concept). One year after placement of the definitive prostheses, patients completed OHIP-14 and satisfaction questionnaires. Results: In all seven domains of the OHIP-14 and in the overall scores, a worse quality of life was found in Group 2 patients, with statistically significant differences between the two groups (p ≤ 0.05). Patients with zygomatic implants were more satisfied with their prostheses, with a statistically significant difference (p < 0.001). Conclusions: According to the results of this study, rehabilitation of patients with edentulous atrophic maxillae with prostheses supported by zygomatic implants combined with anterior implants provided better patient quality of life and satisfaction than prostheses supported by four implants.
Asunto(s)
Satisfacción Personal , Calidad de Vida , Estudios de Seguimiento , Humanos , Satisfacción del Paciente , Estudios Prospectivos , Resultado del Tratamiento , Cigoma/cirugíaRESUMEN
Titanium and its alloys have many applications in dentistry, being used in orthodontics, endodontics, prosthetics and implantology. But the use in the biomedical field depends on its biocompatibility, as the Council Directive 93/42/EEC of 14 June 1993 concerning medical devices has established. The aim of this study was to investigate the cytotoxicity and genotoxicity of a commercial titanium/aluminium/vanadium alloy (Ti-6Al-4V) developed by an innovative sand-blast process with aluminium oxide, and nitric-acid passivation. This procedure created a material with an average surface roughness of 1.73±0.16µm with applications in dental implants. International Organization for Standardization (ISO) procedures 7405:2008 and 10993-5:2009 were used to perform the cytotoxicity tests, and bacterial and cell-mutation assays to evaluate genotoxicity. The results show that this titanium alloy (Ti-6Al-4V) was neither cytotoxic nor genotoxic in any of the tests performed. It can be concluded that this new Ti-6Al-4V material with the roughness characteristics specified shows good biocompatibility and can be considered of choice in dental implantology.
Asunto(s)
Aleaciones Dentales/toxicidad , Implantes Dentales/efectos adversos , Fibroblastos/efectos de los fármacos , Mutágenos/toxicidad , Titanio/toxicidad , Aleaciones , Animales , Células Cultivadas , Citotoxinas/toxicidad , Humanos , Ratones , Pruebas de MutagenicidadRESUMEN
BACKGROUND: Few studies have reported the impact of audiovisual implant surgery information on anxiety and fear. PURPOSE: To investigate the impact of audiovisual information on anxiety and fear in patients undergoing dental implant treatment. MATERIALS AND METHODS: This study included 300 patients due to undergo surgery to place a single implant. An interview topic guide and the Krantz Health Opinion Survey (KHOS) survey were used to assess the information patients already had about treatment and how much information they were seeking. Afterwards were randomized into two groups (n = 150): group 1 (verbal information) and group 2 (audiovisual information). Before surgery, anxiety and fear were assessed using State-Trait Anxiety Inventory (STAI), Modified Corah Dental Anxiety Scale (MDAS), and Dental Fear Scale (DFS) scales. After treatment, all patients described their satisfaction with the information received with a VAS. RESULTS: Before receiving information, both groups were homogenous in their knowledge of the implant procedure (P = .825) and the quantity of information sought (KHOS; P = .080). After receiving information, group 2 patients presented more anxiety and fear than group 1 (STAI-State, STAI-Treat, MDAS, DFS; P < .001). After surgery, both groups were equally satisfied with the information received and the need for additional information (P = .689; P = .199, respectively). CONCLUSIONS: Audiovisual information generated greater anxiety and fear than conventional verbal information in patients undergoing implant surgery.