Goethite and Hematite Nucleation and Growth from Ferrihydrite: Effects of Oxyanion Surface Complexes.

The presence of oxyanions, such as nitrate (NO3-) and phosphate (PO43-), regulates the nucleation and growth of goethite (Gt) and hematite (Hm) during the transformation of ferrihydrite (Fh). Our previous studies showed that oxyanion surface complexes control the rate and pathway of Fh transformation to Gt and Hm. However, how oxyanion surface complexes control the mechanism of Gt and Hm nucleation and growth during the Fh transformation is still unclear. We used synchrotron scattering methods and cryogenic transmission electron microscopy to investigate the effects of NO3- outer-sphere complexes and PO43- inner-sphere complexes on the mechanism of Gt and Hm formation from Fh. Our TEM results indicated that Gt particles form through a two-step model in which Fh particles first transform to Gt nanoparticles and then crystallographically align and grow to larger particles by oriented attachment (OA). In contrast, for the formation of Hm, imaging shows that Fh particles first aggregate and then transform to Hm through interface nucleation. This is consistent with our X-ray scattering results, which demonstrate that NO3- outer-sphere and PO43- inner-sphere complexes promote the formation of Gt and Hm, respectively. These results have implications for understanding the coupled interactions of oxyanions and iron oxy-hydroxides in Earth-surface environments.

Using Microemulsion Phase Behavior as a Predictive Model for Lecithin-Tween 80 Marine Oil Dispersant Effectiveness.

Marine oil dispersants typically contain blends of surfactants dissolved in solvents. When introduced to the crude oil-seawater interface, dispersants facilitate the breakup of crude oil into droplets that can disperse in the water column. Recently, questions about the environmental persistence and toxicity of commercial dispersants have led to the development of "greener" dispersants consisting solely of food-grade surfactants such as l-α-phosphatidylcholine (lecithin, L) and polyoxyethylenated sorbitan monooleate (Tween 80, T). Individually, neither L nor T is effective at dispersing crude oil, but mixtures of the two (LT blends) work synergistically to ensure effective dispersion. The reasons for this synergy remain unexplained. More broadly, an unresolved challenge is to be able to predict whether a given surfactant (or a blend) can serve as an effective dispersant. Herein, we investigate whether the LT dispersant effectiveness can be correlated with thermodynamic phase behavior in model systems. Specifically, we study ternary "DOW" systems comprising LT dispersant (D) + a model oil (hexadecane, O) + synthetic seawater (W), with the D formulation being systematically varied (across 0:100, 20:80, 40:60, 60:40, 80:20, and 100:0 L:T weight ratios). We find that the most effective LT dispersants (60:40 and 80:20 L:T) induce broad Winsor III microemulsion regions in the DOW phase diagrams (Winsor III implies that the microemulsion coexists with aqueous and oil phases). This correlation is generally consistent with expectations from hydrophilic-lipophilic deviation (HLD) calculations, but specific exceptions are seen. This study then outlines a protocol that allows the phase behavior to be observed on short time scales (ca. hours) and provides a set of guidelines to interpret the results. The complementary use of HLD calculations and the outlined fast protocol are expected to be used as a predictive model for effective dispersant blends, providing a tool to guide the efficient formulation of future marine oil dispersants.

The Synthesis Science of Targeted Vapor-Phase Metal-Organic Framework Postmodification.

The postmodification of metal organic frameworks (MOFs) affords exceedingly high surface area materials with precisely installed chemical features, which provide new opportunities for detailed structure-function correlation in the field of catalysis. Here, we significantly expand upon the number of vapor-phase postmodification processes reported to date through screening a library of atomic layer deposition (ALD) precursors, which span metals across the periodic table and which include ligands from four distinct precursor classes. With a large library of precursors and synthesis conditions, we discern trends in the compatibility of precursor classes for well-behaved ALD in MOFs (AIM) and identify challenges and solutions to more precise postsynthetic modification.

Selective Methane Oxidation to Methanol on Cu-Oxo Dimers Stabilized by Zirconia Nodes of an NU-1000 Metal-Organic Framework.

Mononuclear and dinuclear copper species were synthesized at the nodes of an NU-1000 metal-organic framework (MOF) via cation exchange and subsequent oxidation at 200 °C in oxygen. Copper-exchanged MOFs are active for selectively converting methane to methanol at 150-200 °C. At 150 °C and 1 bar methane, approximately a third of the copper centers are involved in converting methane to methanol. Methanol productivity increased by 3-4-fold and selectivity increased from 70% to 90% by increasing the methane pressure from 1 to 40 bar. Density functional theory showed that reaction pathways on various copper sites are able to convert methane to methanol, the copper oxyl sites with much lower free energies of activation. Combining studies of the stoichiometric activity with characterization by in situ X-ray absorption spectroscopy and density functional theory, we conclude that dehydrated dinuclear copper oxyl sites formed after activation at 200 °C are responsible for the activity.

Well-Defined Rhodium-Gallium Catalytic Sites in a Metal-Organic Framework: Promoter-Controlled Selectivity in Alkyne Semihydrogenation to E-Alkenes.

Promoters are ubiquitous in industrial heterogeneous catalysts. The wider roles of promoters in accelerating catalysis and/or controlling selectivity are, however, not well understood. A model system has been developed where a heterobimetallic active site comprising an active metal (Rh) and a promoter ion (Ga) is preassembled and delivered onto a metal-organic framework (MOF) support, NU-1000. The Rh-Ga sites in NU-1000 selectively catalyze the hydrogenation of acyclic alkynes to E-alkenes. The overall stereoselectivity is complementary to the well-known Lindlar's catalyst, which generates Z-alkenes. The role of the Ga in promoting this unusual selectivity is evidenced by the lack of semihydrogenation selectivity when Ga is absent and only Rh is present in the active site.

Application and Limitations of Nanocasting in Metal-Organic Frameworks.

Nanocasting can be a useful strategy to transfer the catalytic metal clusters in metal-organic frameworks (MOFs) to an all-inorganic support such as silica. The incorporation of silica in the MOF pores as a secondary support has the potential to extend the application of the highly tunable metal-based active sites in MOFs to high temperature catalysis. Here, we demonstrate the applicability of the nanocasting method to a range of MOFs that incorporate catalytically attractive hexazirconium, hexacerium, or pentanickel oxide-based clusters (UiO-66, (Ce)UiO-66, (Ce)UiO-67, (Ce)MOF-808, DUT-9, and In- and Ni-postmetalated NU-1000). We describe, in tutorial form, the challenges associated with nanocasting of MOFs that are related to their small pore size and to considerations of chemical and mechanical stability, and we provide approaches to overcome some of these challenges. Some of these nanocast materials feature the site-isolated clusters in a porous, thermally stable silica matrix, suitable for catalysis at high temperatures; in others, structural rearrangement of clusters or partial cluster aggregation occurs, but extensive aggregation can be mitigated by the silica skeleton introduced during nanocasting.

Sinter-Resistant Platinum Catalyst Supported by Metal-Organic Framework.

Single atoms and few-atom clusters of platinum are uniformly installed on the zirconia nodes of a metal-organic framework (MOF) NU-1000 via targeted vapor-phase synthesis. The catalytic Pt clusters, site-isolated by organic linkers, are shown to exhibit high catalytic activity for ethylene hydrogenation while exhibiting resistance to sintering up to 200 °C. In situ IR spectroscopy reveals the presence of both single atoms and few-atom clusters that depend upon synthesis conditions. Operando X-ray absorption spectroscopy and X-ray pair distribution analyses reveal unique changes in chemical bonding environment and cluster size stability while on stream. Density functional theory calculations elucidate a favorable reaction pathway for ethylene hydrogenation with the novel catalyst. These results provide evidence that atomic layer deposition (ALD) in MOFs is a versatile approach to the rational synthesis of size-selected clusters, including noble metals, on a high surface area support.

Assembly of dicobalt and cobalt-aluminum oxide clusters on metal-organic framework and nanocast silica supports.

NU-1000, a mesoporous metal-organic framework (MOF) featuring hexazirconium oxide nodes and 3 nm wide channels, was infiltrated with a reactive dicobalt complex to install dicobalt active sites onto the MOF nodes. The anchoring of the dicobalt complex onto NU-1000 occurred with a nearly ideal stoichiometry of one bimetallic complex per node and with the cobalt evenly distributed throughout the MOF particle. To access thermally robust multimetallic sites on an all-inorganic support, the modified NU-1000 materials containing either the dicobalt complex, or an analogous cobalt-aluminum species, were nanocast with silica. The resulting materials feature Co2 or Co-Al bimetallated hexazirconium oxide clusters within a silica matrix. The cobalt-containing materials are competent catalysts for the selective oxidation of benzyl alcohol to benzaldehyde. Catalytic activity depends on the number of cobalt ions per node, but does not vary significantly between the NU-1000 and silica supports. Hence, the multimetallic oxide clusters remain site-isolated and substrate-accessible within the nanocast materials.

Quantifying Protein Concentrations Using Smartphone Colorimetry: A New Method for an Established Test.

Proteins are involved in nearly every biological process, which makes them of interest to a range of scientists. Previous work has shown that hand-held cameras can be used to determine the concentration of colored analytes in solution, and this paper extends the approach to reactions involving a color change in order to quantify protein concentration (e.g., green to blue). Herein, we describe the successful use of smartphone colorimetry to quantify protein concentration using two common colorimetric biochemical methods, the Bradford and biuret assays. The ease of the experimental setup makes these lab experiments accessible to a wide range of students and can be used as both high school and college level laboratory experiments.

Cation-Dependent Hierarchical Assembly of U60 Nanoclusters into Macro-Ion Assemblies Imaged via Cryogenic Transmission Electron Microscopy.

Self-assembly of ([UO2(O2)OH]60)(60-) (U60), an actinide polyoxometalate with fullerene topology, can be induced by the addition of mono- and divalent cations to aqueous U60 solutions. Dynamic light scattering and small-angle X-ray scattering lend important insights into assembly in this system, but direct imaging of U60 and its assemblies via transmission electron microscopy (TEM) has remained an elusive goal. In this work, we used cryogenic TEM to image U60 and secondary and tertiary assemblies of U60 to characterize the size, morphology, and rate of formation of the secondary and tertiary structures. The kinetics and final morphologies of the secondary and tertiary structures strongly depend on the cation employed, with monovalent cations (Na(+) and K(+)) leading to the highest rates and largest secondary and tertiary structures.

Thermal Stabilization of Metal-Organic Framework-Derived Single-Site Catalytic Clusters through Nanocasting.

Metal-organic frameworks (MOFs) provide convenient systems for organizing high concentrations of single catalytic sites derived from metallic or oxo-metallic nodes. However, high-temperature processes cause agglomeration of these nodes, so that the single-site character and catalytic activity are lost. In this work, we present a simple nanocasting approach to provide a thermally stable secondary scaffold for MOF-based catalytic single sites, preventing their aggregation even after exposure to air at 600 °C. We describe the nanocasting of NU-1000, a MOF with 3 nm channels and Lewis-acidic oxozirconium clusters, with silica. By condensing tetramethylorthosilicate within the NU-1000 pores via a vapor-phase HCl treatment, a silica layer is created on the inner walls of NU-1000. This silica layer provides anchoring sites for the oxozirconium clusters in NU-1000 after the organic linkers are removed at high temperatures. Differential pair distribution functions obtained from synchrotron X-ray scattering confirmed that isolated oxozirconium clusters are maintained in the heated nanocast materials. Pyridine adsorption experiments and a glucose isomerization reaction demonstrate that the clusters remain accessible to reagents and maintain their acidic character and catalytic activity even after the nanocast materials have been heated to 500-600 °C in air. Density functional theory calculations show a correlation between the Lewis acidity of the oxozirconium clusters and their catalytic activity. The ability to produce MOF-derived materials that retain their catalytic properties after exposure to high temperatures makes nanocasting a useful technique for obtaining single-site catalysts suitable for high-temperature reactions.

Facet-Dependent Oxidative Goethite Growth As a Function of Aqueous Solution Conditions.

Nitroaromatic compounds are groundwater pollutants that can be degraded through reactions with Fe(II) adsorbed on iron oxide nanoparticles, although little is known about the evolving reactivity of the minerals with continuous pollutant exposure. In this work, Fe(II)/goethite reactivity toward 4-chloronitrobenzene (4-ClNB) as a function of pH, organic matter presence, and reactant concentrations was explored using sequential-spike batch reactors. Reaction rate constants were smaller with lower pH, introduction of organic matter, and diluted reactant concentrations as compared to a reference condition. Reaction rate constants did not change with the number of 4-ClNB spikes for all reaction conditions. Under all conditions, oxidative goethite growth was demonstrated through X-ray diffraction, magnetic characterization, and transmission electron microscopy. Nonparametric statistics were applied to compare histograms of lengths and widths of goethite nanoparticles as a function of varied solution conditions. The conditions that slowed the reaction also resulted in statistically shorter and wider particles than for the faster reactions. Additionally, added organic matter interfered with particle growth on the favorable {021} faces to a greater extent, with statistically reduced rate of growth on the tip facets and increased rate of growth on the side facets. These data demonstrate that oxidative growth of goethite in aqueous systems is dependent on major groundwater variables, such as pH and the presence of organic matter, which could lead to the evolving reactivity of goethite particles in natural environments.

Character of Humic Substances as a Predictor for Goethite Nanoparticle Reactivity and Aggregation.

Natural organic matter (NOM) is ubiquitous in surface water and groundwater and interacts strongly with mineral surfaces. The details of these interactions, as well as their impacts on mineral surface reactivity, are not well understood. In this work, both the reactivity and aggregation of goethite (α-FeOOH) nanoparticles were quantified in the presence of well-characterized humic substances. Results from monitoring the kinetics of reductive degradation of 4-chloronitrobenzene (4-ClNB) by Fe(II) adsorbed onto the goethite nanoparticles with and without added humic substances demonstrates that, in all cases, humic substances suppressed Fe(II)-goethite reactivity. The ranking of the standards from the least to most inhibitive was Pahokee Peat humic acid, Elliot Soil humic acid, Suwannee River humic acid, Suwannee River NOM, Suwannee River fulvic acid I, Suwannee River fulvic acid II, and Pahokee Peat fulvic acid. Correlations between eight characteristics (molecular weight, carboxyl concentration, and carbon, oxygen, nitrogen, aliphatic, heteroaliphatic, and aromatic content) and 4-ClNB degradation rate constants were observed. Faster kinetic rates of reductive degradation were observed with increased molecular weight and nitrogen, carbon, and aromatic content, and slower rates were observed with increased carboxyl concentration and oxygen, heteroaliphatic, and aliphatic content. With these correlations, improved predictions of the reactivity of Fe(II)-goethite with pollutants based on properties of the humic substances are possible.

Cryogenic transmission electron microscopy: aqueous suspensions of nanoscale objects.

Direct imaging of nanoscale objects suspended in liquid media can be accomplished using cryogenic transmission electron microscopy (cryo-TEM). Cryo-TEM has been used with particular success in microbiology and other biological fields. Samples are prepared by plunging a thin film of sample into an appropriate cryogen, which essentially produces a snapshot of the suspended objects in their liquid medium. With successful sample preparation, cryo-TEM images can facilitate elucidation of aggregation and self-assembly, as well as provide detailed information about cells and viruses. This work provides an explanation of sample preparation, detailed examples of the many artifacts found in cryo-TEM of aqueous samples, and other key considerations for successful cryo-TEM imaging.

Sewage sludge induces changes in the surface chemistry and crystallinity of polylactic acid and polyethylene films.

Plastic pollution is a major threat facing our environment. To understand the full effects, we must first characterize how plastics break down in environmental systems. Heretofore, there has been little work examining how exposure to sewage sludge facilitates the degradation of plastics, particularly of plastics that have been previously weathered. Herein, we characterize how the crystallinity, surface chemistry, and morphology of polylactic acid (PLA) and polyethylene (PE) films change due to sludge exposure. In this work, sludge-induced changes in carbonyl index were found to depend on the level of prior exposure to ultraviolet (UV) irradiation. The carbonyl indices of un-irradiated films increased while those of UV-aged films decreased after 35 days of sludge exposure. In addition, the carbon­oxygen and hydroxyl bond indices of PE films increased with sludge exposure, suggesting the surface oxidation of PE. As for PLA, crystallinity was found to increase with sludge exposure, consistent with a chain scission mechanism. This work will help to predict the behavior of plastic films after transfer from wastewater to sewage sludge.

Sub-40 nm zeolite suspensions via disassembly of three-dimensionally ordered mesoporous-imprinted silicalite-1.

Zeolite nanocrystals were prepared from three-dimensionally ordered mesoporous-imprinted (3DOm-i) silicalite-1 by a fragmentation method involving sonication and dissolution within a certain pH range. 3DOm-i silicalite-1 with spherical elements with diameters ranging from 10 to 40 nm and a wide range of crystal sizes (100-200 nm, 500-600 nm, and 1-2 µm) was used as the starting material. The highest yield (57%) of isolated nanocrystals was obtained for 3DOm-i silicalite-1 with a crystal size of 100-200 nm and a spherical element diameter of 40 nm. The smallest nanocrystals obtained, albeit in very low yields, had a 10 nm diameter. Preparation of stable silicalite-1 nanocrystal suspensions fragmented from 20 and 40 nm 3DOm-i silicalite-1 was demonstrated. Cryogenic transmission electron microscopy showed that the isolated zeolite nanocrystals can be used as seeds for the epitaxial growth of silicalite-1. An application of these findings was demonstrated: silicalite-1 nanocrystal suspensions were used to deposit seed layers on porous α-alumina disks, which were converted to continuous thin (300-400 nm) films by secondary growth that exhibited both high permeances and separation factors (3.5 × 10(-7) mol m(-2) s(-1) Pa(-1) and 94-120, respectively, at 150 °C) for p- and o-xylene.

Tracking surface evolution using ligand-assisted dissolution of cobalt oxyhydroxide.

The use of surface-specific reactions to probe reactive surface area is a promising direction in materials research. The work presented herein examines how the kinetics of dissolution can be used to quantify particle growth as well as the evolution of site-specific reactive surface area. The dissolution of heterogenite (ß-CoOOH) by IDA results in two geometric isomers of Co(IDA)(2)(-): the s-fac and u-fac isomers. The heterogenite particles studied here can generally be described as cylindrical plates, and the relative amount of s-fac isomer produced is found to increase as the height of the plates increases. The quantity of each isomer produced is shown to correlate with the relative number of two different types of surface sites, designated as edge and corner sites, while basal sites are seemingly unreactive. It is hypothesized that u-fac isomer results from the more accessible Co centers at the corner sites, while the s-fac isomer results from the less accessible edge sites. An empirical relationship is developed between the fraction of s-fac isomer produced and the height of the ß-CoOOH particles, and this relationship is used to quantify particle growth by analysis of kinetic data. Finally, this new information is used to modify a previously proposed pH-dependent growth model, resulting in a significant improvement in the fit and physical relevance of the model.

3D Periodic and Interpenetrating Tungsten-Silicon Oxycarbide Nanocomposites Designed for Mechanical Robustness.

Metal-ceramic nanocomposites exhibit exceptional mechanical properties with a combination of high strength, toughness, and hardness that are not achievable in monolithic metals or ceramics, which make them valuable for applications in fields such as the aerospace and automotive industries. In this study, interpenetrating nanocomposites of three-dimensionally ordered macroporous (3DOM) tungsten-silicon oxycarbide (W-SiOC) were prepared, and their mechanical properties were investigated. In these nanocomposites, the crystalline tungsten and amorphous silicon oxycarbide phases both form continuous and interpenetrating networks, with some discrete free carbon nanodomains. The W-SiOC material inherits the periodic structure from its 3DOM W matrix, and this periodic structure can be maintained up to 1000 °C. In situ SEM micropillar compression tests demonstrated that the 3DOM W-SiOC material could sustain a maximum average stress of 1.1 GPa, a factor of 22 greater than that of the 3DOM W matrix, resulting in a specific strength of 640 MPa/(Mg/m3) at 30 °C. Deformation behavior of the developed 3DOM nanocomposite in a wide temperature range (30-575 °C) was investigated. The deformation mode of 3DOM W-SiOC exhibited a transition from fracture-dominated deformation at low temperatures to plastic deformation above 425 °C.

Oriented aggregation: formation and transformation of mesocrystal intermediates revealed.

Oriented aggregation is a special case of aggregation in which nanocrystals self-assemble and form new secondary single crystals. This process has been suggested to proceed via an intermediate state known as the mesocrystal, in which the nanocrystals have parallel crystallographic alignment but are spatially separated. We present the first direct observations of mesocrystals with size and shape similar to product oriented aggregates by employing cryo-TEM to directly image the particles in aqueous suspension. The cryo-TEM images reveal that mesocrystals not only form but also transform to the final single crystal product while in the dispersed state. Further, high-resolution cryo-TEM images demonstrate that the mesocrystals are composed of spatially separated and crystallographically aligned nanocrystals.