Optimizing non-Newtonian fluids for impact protection of laminates.

Non-Newtonian fluids can be used for the protection of flexible laminates. Understanding the coupling between the flow of the protecting fluid and the deformation of the protected solids is necessary in order to optimize this functionality. We present a scaling analysis of the problem based on a single coupling variable, the effective width of a squeeze flow between flat rigid plates, and predict that impact protection for laminates is optimized by using shear-thinning, and not shear-thickening, fluids. The prediction is verified experimentally by measuring the velocity and pressure in impact experiments. Our scaling analysis should be generically applicable for non-Newtonian fluid-solid interactions in diverse applications.

Encapsulated bacteria deform lipid vesicles into flagellated swimmers.

We study a synthetic system of motile Escherichia coli bacteria encapsulated inside giant lipid vesicles. Forces exerted by the bacteria on the inner side of the membrane are sufficient to extrude membrane tubes filled with one or several bacteria. We show that a physical coupling between the membrane tube and the flagella of the enclosed cells transforms the tube into an effective helical flagellum propelling the vesicle. We develop a simple theoretical model to estimate the propulsive force from the speed of the vesicles and demonstrate the good efficiency of this coupling mechanism. Together, these results point to design principles for conferring motility to synthetic cells.

Characterization and Control of the Run-and-Tumble Dynamics of Escherichia Coli.

We characterize the full spatiotemporal gait of populations of swimming Escherichia coli using renewal processes to analyze the measurements of intermediate scattering functions. This allows us to demonstrate quantitatively how the persistence length of an engineered strain can be controlled by a chemical inducer and to report a controlled transition from perpetual tumbling to smooth swimming. For wild-type E. coli, we measure simultaneously the microscopic motility parameters and the large-scale effective diffusivity, hence quantitatively bridging for the first time small-scale directed swimming and macroscopic diffusion.

Correction: Sizing multimodal suspensions with differential dynamic microscopy.

Correction for 'Sizing multimodal suspensions with differential dynamic microscopy' by Joe J. Bradley et al., Soft Matter, 2023, 19, 8179-8192, https://doi.org/10.1039/D3SM00593C.

Ductile-to-brittle transition and yielding in soft amorphous materials: perspectives and open questions.

Soft amorphous materials are viscoelastic solids ubiquitously found around us, from clays and cementitious pastes to emulsions and physical gels encountered in food or biomedical engineering. Under an external deformation, these materials undergo a noteworthy transition from a solid to a liquid state that reshapes the material microstructure. This yielding transition was the main theme of a workshop held from January 9 to 13, 2023 at the Lorentz Center in Leiden. The manuscript presented here offers a critical perspective on the subject, synthesizing insights from the various brainstorming sessions and informal discussions that unfolded during this week of vibrant exchange of ideas. The result of these exchanges takes the form of a series of open questions that represent outstanding experimental, numerical, and theoretical challenges to be tackled in the near future.

Evaporation of Concentrated Polymer Solutions Is Insensitive to Relative Humidity.

A recent theory suggests that the evaporation kinetics of macromolecular solutions is insensitive to the ambient relative humidity (RH) due to the formation of a "polarization layer" of solutes at the air-solution interface. We confirm this insensitivity up to RH≈80% in the evaporation of polyvinyl alcohol solutions from open-ended capillaries. To explain the observed drop in evaporation rate at higher RH, we need to invoke compressive stresses due to interfacial polymer gelation. Moreover, RH-insensitive evaporation sets in earlier than theory predicts, suggesting a further role for a gelled "skin." We discuss the relevance of these observations for respiratory virus transmission via aerosols.

Sizing multimodal suspensions with differential dynamic microscopy.

Differential dynamic microscopy (DDM) can be used to extract the mean particle size from videos of suspensions. However, many suspensions have multimodal particle size distributions, for which a single 'mean' is not a sufficient description. After clarifying how different particle sizes contribute to the signal in DDM, we show that standard DDM analysis can extract the mean sizes of two populations in a bimodal suspension given prior knowledge of the sample's bimodality. Further, the use of the CONTIN algorithm obviates the need for such prior knowledge. Finally, we show that by selectively analysing portions of the DDM images, we can size a trimodal suspension where the large particles would otherwise dominate the signal, again without prior knowledge of the trimodality.

A combined rheometry and imaging study of viscosity reduction in bacterial suspensions.

Suspending self-propelled "pushers" in a liquid lowers its viscosity. We study how this phenomenon depends on system size in bacterial suspensions using bulk rheometry and particle-tracking rheoimaging. Above the critical bacterial volume fraction needed to decrease the viscosity to zero, [Formula: see text], large-scale collective motion emerges in the quiescent state, and the flow becomes nonlinear. We confirm a theoretical prediction that such instability should be suppressed by confinement. Our results also show that a recent application of active liquid-crystal theory to such systems is untenable.

Flow-Switched Bistability in a Colloidal Gel with Non-Brownian Grains.

We show that mixing a colloidal gel with larger, non-Brownian grains generates novel flow-switched bistability. Using a combination of confocal microscopy and rheology, we find that prolonged moderate shear results in liquefaction by collapsing the gel into disjoint globules, whereas fast shear gives rise to a yield-stress gel with granular inclusions upon flow cessation. We map out the state diagram of this new "mechanorheological material" with varying granular content and demonstrate that its behavior is also found in separate mixture using different particles and solvents.

Run-to-Tumble Variability Controls the Surface Residence Times of E. coli Bacteria.

Motile bacteria are known to accumulate at surfaces, eventually leading to changes in bacterial motility and biofilm formation. We use a novel two-color, three-dimensional Lagrangian tracking technique to follow simultaneously the body and the flagella of a wild-type Escherichia coli. We observe long surface residence times and surface escape corresponding mostly to immediately antecedent tumbling. A motility model accounting for a large behavioral variability in run-time duration reproduces all experimental findings and gives new insights into surface trapping efficiency.

Probing the dynamics of turbid colloidal suspensions using differential dynamic microscopy.

Few techniques can reliably measure the dynamics of colloidal suspensions or other soft materials over a wide range of turbidities. Here we systematically investigate the capability of Differential Dynamic Microscopy (DDM) to characterise particle dynamics in turbid colloidal suspensions based on brightfield optical microscopy. We measure the Intermediate Scattering Function (ISF) of polystyrene microspheres suspended in water over a range of concentrations, turbidities, and up to 4 orders of magnitude in time-scales. These DDM results are compared to data obtained from both Dynamic Light Scattering (DLS) and Two-colour Dynamic Light Scattering (TCDLS). The latter allows for suppression of multiple scattering for moderately turbid suspensions. We find that DDM can obtain reliable diffusion coefficients at up to 10 and 1000 times higher particle concentrations than TCDLS and standard DLS, respectively. Additionally, we investigate the roles of the four length-scales relevant when imaging a suspension: the sample thickness L, the imaging depth z, the imaging depth of field DoF, and the photon mean free path . More detailed experiments and analysis reveal the appearance of a short-time process as turbidity is increased, which we associate with multiple scattering events within the imaging depth of the field. The long-time process corresponds to the particle dynamics from which particle-size can be estimated in the case of non-interacting particles. Finally, we provide a simple theoretical framework, ms-DDM, for turbid samples, which accounts for multiple scattering.

The rheology of confined colloidal hard disks.

Colloids may be treated as "big atoms" so that they are good models for atomic and molecular systems. Colloidal hard disks are, therefore, good models for 2d materials, and although their phase behavior is well characterized, rheology has received relatively little attention. Here, we exploit a novel, particle-resolved, experimental setup and complementary computer simulations to measure the shear rheology of quasi-hard-disk colloids in extreme confinement. In particular, we confine quasi-2d hard disks in a circular "corral" comprised of 27 particles held in optical traps. Confinement and shear suppress hexagonal ordering that would occur in the bulk and create a layered fluid. We measure the rheology of our system by balancing drag and driving forces on each layer. Given the extreme confinement, it is remarkable that our system exhibits rheological behavior very similar to unconfined 2d and 3d hard particle systems, characterized by a dynamic yield stress and shear-thinning of comparable magnitude. By quantifying particle motion perpendicular to shear, we show that particles become more tightly confined to their layers with no concomitant increase in density upon increasing the shear rate. Shear thinning is, therefore, a consequence of a reduction in dissipation due to weakening in interactions between layers as the shear rate increases. We reproduce our experiments with Brownian dynamics simulations with Hydrodynamic Interactions (HI) included at the level of the Rotne-Prager tensor. That the inclusion of HI is necessary to reproduce our experiments is evidence of their importance in transmission of momentum through the system.

Conching chocolate is a prototypical transition from frictionally jammed solid to flowable suspension with maximal solid content.

The mixing of a powder of 10- to 50-µm primary particles into a liquid to form a dispersion with the highest possible solid content is a common industrial operation. Building on recent advances in the rheology of such "granular dispersions," we study a paradigmatic example of such powder incorporation: the conching of chocolate, in which a homogeneous, flowing suspension is prepared from an inhomogeneous mixture of particulates, triglyceride oil, and dispersants. Studying the rheology of a simplified formulation, we find that the input of mechanical energy and staged addition of surfactants combine to effect a considerable shift in the jamming volume fraction of the system, thus increasing the maximum flowable solid content. We discuss the possible microscopic origins of this shift, and suggest that chocolate conching exemplifies a ubiquitous class of powder-liquid mixing.

Rheological design of thickened alcohol-based hand rubs.

The handleability and sensory perception of hand sanitisers by consumers affect the hygiene outcome. Spillage may result in under-dosing and poor sensory properties can lead to under-utilisation. We first propose four principles (low runoff, spreadability, smoothness and non-stickiness) for designing the rheology of thickened alcohol-based hand rubs with acceptable handleability and hand feel. We then evaluate a commercial hand gel and a variety of simplified formulations thickened with microgels (Carbopol 974P, Carbopol Ultrez 20 and Sepimax Zen), or linear polymers (Jaguar HP 120 COS), and evaluate them against these design criteria. All four additives provide acceptable spreadability by shear thinning to η ≈ 10 - 1 Pa s at γ ˙ ∼ 10 3 s - 1 . Either the finite yield stress conferred by the microgels ( σ y ≳ 10 Pa ) or the increase in low-shear viscosity provided by the linear polymer ( η ≳ 1 Pa s at γ ˙ ≲ 0.1 s - 1 ) give rise to acceptably low runoff. However, the formulation using the linear polymer shows a filament breakage time of τ b ≈ 1 s in capillary rheology, which may result in stickiness and therefore a less than optimal hand feel.

Hook length of the bacterial flagellum is optimized for maximal stability of the flagellar bundle.

Most bacteria swim in liquid environments by rotating one or several flagella. The long external filament of the flagellum is connected to a membrane-embedded basal body by a flexible universal joint, the hook, which allows the transmission of motor torque to the filament. The length of the hook is controlled on a nanometer scale by a sophisticated molecular ruler mechanism. However, why its length is stringently controlled has remained elusive. We engineered and studied a diverse set of hook-length variants of Salmonella enterica. Measurements of plate-assay motility, single-cell swimming speed, and directional persistence in quasi-2D and population-averaged swimming speed and body angular velocity in 3D revealed that the motility performance is optimal around the wild-type hook length. We conclude that too-short hooks may be too stiff to function as a junction and too-long hooks may buckle and create instability in the flagellar bundle. Accordingly, peritrichously flagellated bacteria move most efficiently as the distance travelled per body rotation is maximal and body wobbling is minimized. Thus, our results suggest that the molecular ruler mechanism evolved to control flagellar hook growth to the optimal length consistent with efficient bundle formation. The hook-length control mechanism is therefore a prime example of how bacteria evolved elegant but robust mechanisms to maximize their fitness under specific environmental constraints.

Diffusion, phase behavior, and gelation in a two-dimensional layer of colloids in osmotic equilibrium with a polymer reservoir.

The addition of enough non-adsorbing polymers to an otherwise stable colloidal suspension gives rise to a variety of phase behaviors and kinetic arrest due to the depletion attraction induced between the colloids by the polymers. We report a study of these phenomena in a two-dimensional layer of colloids. The three-dimensional phenomenology of crystal-fluid coexistence is reproduced, but gelation takes a novel form, in which the strands in the gel structure are locally crystalline. We compare our findings with a previous simulation and theory and find substantial agreement.

Reactive Momentum Transfer Contributes to the Self-Propulsion of Janus Particles.

We report simulations of a spherical Janus particle undergoing exothermic surface reactions around one pole only. Our model excludes self-phoretic transport by design. Nevertheless, net motion occurs from direct momentum transfer between solvent and colloid, with speed scaling as the square root of the energy released during the reaction. We find that such propulsion is dominated by the system's short-time response, when neither the time dependence of the flow around the colloid nor the solvent compressibility can be ignored. Our simulations agree reasonably well with previous experiments.

Testing the Wyart-Cates model for non-Brownian shear thickening using bidisperse suspensions.

There is a growing consensus that shear thickening of concentrated dispersions is driven by the formation of stress-induced frictional contacts. The Wyart-Cates (WC) model of this phenomenon, in which the microphysics of the contacts enters solely via the fraction f of contacts that are frictional, can successfully fit flow curves for suspensions of weakly polydisperse spheres. However, its validity for "real-life", polydisperse suspensions has yet to be seriously tested. By performing systematic simulations on bidisperse mixtures of spheres, we show that the WC model applies only in the monodisperse limit and fails when substantial bidispersity is introduced. We trace the failure of the model to its inability to distinguish large-large, large-small and small-small frictional contacts. By fitting our data using a polydisperse analogue of f that depends separately on the fraction of each of these contact types, we show that the WC picture of shear thickening is incomplete. Systematic experiments on model shear-thickening suspensions corroborate our findings, but highlight important challenges in rigorously testing the WC model with real systems. Our results prompt new questions about the microphysics of thickening for both monodisperse and polydisperse systems.

Soft matter science and the COVID-19 pandemic.

Much of the science underpinning the global response to the COVID-19 pandemic lies in the soft matter domain. Coronaviruses are composite particles with a core of nucleic acids complexed to proteins surrounded by a protein-studded lipid bilayer shell. A dominant route for transmission is via air-borne aerosols and droplets. Viral interaction with polymeric body fluids, particularly mucus, and cell membranes controls their infectivity, while their interaction with skin and artificial surfaces underpins cleaning and disinfection and the efficacy of masks and other personal protective equipment. The global response to COVID-19 has highlighted gaps in the soft matter knowledge base. We survey these gaps, especially as pertaining to the transmission of the disease, and suggest questions that can (and need to) be tackled, both in response to COVID-19 and to better prepare for future viral pandemics.

Osmotaxis in Escherichia coli through changes in motor speed.

Bacterial motility, and in particular repulsion or attraction toward specific chemicals, has been a subject of investigation for over 100 years, resulting in detailed understanding of bacterial chemotaxis and the corresponding sensory network in many bacterial species. For Escherichia coli most of the current understanding comes from the experiments with low levels of chemotactically active ligands. However, chemotactically inactive chemical species at concentrations found in the human gastrointestinal tract produce significant changes in E. coli's osmotic pressure and have been shown to lead to taxis. To understand how these nonspecific physical signals influence motility, we look at the response of individual bacterial flagellar motors under stepwise changes in external osmolarity. We combine these measurements with a population swimming assay under the same conditions. Unlike for chemotactic response, a long-term increase in swimming/motor speeds is observed, and in the motor rotational bias, both of which scale with the osmotic shock magnitude. We discuss how the speed changes we observe can lead to steady-state bacterial accumulation.