Cationic Porphyrin-Anionic Surfactant Mixtures for the Promotion of Self-Organized 1:4 Ion Pairs in Water with Strong Aggregation Properties.

We performed a systematic study on the spectroscopic and aggregation properties of stoichiometric mixtures (1:4) of the tetracationic meso-tetrakis(4-N-methylpyridinium)porphyrin (H2 TMPyP) and three sodium alkylsulfate surfactants (tetradecyl, hexadecyl, and octadecylsulfate) in an aqueous solution. The objective was to build a supramolecular aggregate, which would favor the internalization of tetracationic porphyrins in cells without chemical modification of the structure of the porphyrin. We show that stoichiometric H2 TMPyP/alkylsulfate (1:4) mixtures lead to the formation of large hollow spherical aggregates (60-160 nm). The TEM images show that the membrane of these aggregates are composed of smaller aggregates, which are probably rod-like micelles. These rod-like micelles have a hydrophobic core composed of the alkyl chains of the alkylsulfate surfactant, whereas the charged surface corresponds to the tetracationic porphyrins.

Trioxaquine PA1259 alkylates heme in the blood-feeding parasite Schistosoma mansoni.

Trioxaquine PA1259 is an efficient drug on larval- and adult-stage schistosomes, able to alkylate heme inside worms treated with it, leading to the formation of covalent heme-drug adducts. Such a mechanism, similar to one reported for other trioxaquines in Plasmodium, indicates that heme may be a common target of these trioxane-based drugs in different blood-feeding parasites.

Zinc(II) modulates specifically amyloid formation and structure in model peptides.

Metal ions such as zinc and copper can have dramatic effects on the aggregation kinetics of and the structures formed by several amyloidogenic peptides/proteins. Depending on the identity of the amyloidogenic peptide/protein and the conditions, Zn(II) and Cu(II) can promote or inhibit fibril formation, and in some cases these metal ions have opposite effects. To better understand this modulation of peptide aggregation by metal ions, the impact of Zn(II) binding to three amyloidogenic peptides (Aß14-23, Aß11-23, and Aß11-28) on the formation and structure of amyloid-type fibrils was investigated. Zn(II) was able to accelerate fibril formation for all three peptides as measured by thioflavin T fluorescence and transmission electron microscopy. The effects of Zn(II) on Aß11-23 and Aß11-28 aggregation were very different compared with the effects of Cu(II), showing that these promoting effects were metal-specific. X-ray absorption spectroscopy suggested that the Zn(II) binding to Aß11-23 and Aß11-28 is very different from Cu(II) binding, but that the binding is similar in the case of Aß14-23. A model is proposed in which the different coordination chemistry of Zn(II) compared with Cu(II) explains the metal-specific effect on aggregation and the difference between peptides Aß14-23 and Aß11-23/Aß11-28.

Adsorption of protein-surfactant complexes at the water/oil interface.

Interfacial tension measurements have been performed at the water/hexane interface on mixtures of the bovine milk protein ß-lactoglobulin and positively charged cationic surfactants (alkytrimethylammonium bromides). The addition of surfactants with different chain lengths leads to the formation of protein-surfactant complexes with different adsorption properties as compared to those of the single protein. In this study, the formation of complexes has been observed clearly for protein-long chain surfactant (TTAB and CTAB) mixtures, which has shown in addition to specific electrostatic interactions the relevance of hydrophobic interactions between surfactant molecules and the protein. The modeling of interfacial tension data by using a mixed adsorption model provides a quantitative understanding of the mixture behavior. Indeed, the value of the adsorption constant of the protein obtained in the presence of surfactants has strongly varied as compared to the single protein. Actually, this parameter which represents the affinity of the molecule for the interface is representative of the hydrophobic character of the compound and so of its surface activity. Even if a more hydrophobic and more surface active protein-surfactant complex has been formed, the replacement of this complex from the interface by surfactants close to their cmc was observed.

Interfacial properties of mixed beta-lactoglobulin-SDS layers at the water/air and water/oil interface.

The adsorption behavior of the beta-lactoglobuline has been studied in the presence of the anionic surfactant sodium dodecylsulfate (SDS) and compared for two different interfaces, water/air and water/hexane. The fitting of experimental data (adsorption isotherms) by a mixed adsorption model and the determination of structural parameters such as the molecular area occupied by the protein-surfactant complex and the surfactant molecules at the interface allowed to have a better understanding of the composition and as a consequence the behavior of the mixed interfacial layer. The parameters obtained for the mixtures are similar to those obtained separately for the single components, but the comparison of the both interfaces has shown significant differences. Much higher concentration of complex is found at the water/hexane interface, which is the result of a better affinity of the protein for this interface. A higher penetration of the protein into the oil phase and the presence of interactions between protein-surfactant complexes and free surfactant molecules stabilize the interface preventing its replacement by the SDS molecules. Rheological experiments show a decrease of the visco-elastic modulus at both interfaces with increasing SDS concentration. But at the water/oil interface, contrary to the water/air interface at which the replacement of the protein has been clearly observed, this decrease is attributed to changes of complex properties. At high SDS concentrations, an increase of the hydrophilic character due to hydrophobic interactions with the surfactant molecules leads to an increase in the mobility of the complex, which favors its desorption upon increased competition by the surfactant.

Periodic marangoni instability in surfactant (CTAB) liquid/liquid mass transfer.

Periodic Marangoni convective instability has been observed in a biphasic system during the mass transfer of cetyltrimethylammonium bromide (CTAB) from an aqueous to a dichloromethane organic phase. Visualization of the convective fluxes was possible thanks to the CTAB crystals that are formed in the aqueous phase at a temperature below the Krafft point. Surface tension and electrical potential oscillations have been shown to be correlated with the fluid motion. Surface tension measurements, representative of the adsorption state, showed fast adsorption during the convective stage, followed by a slower desorption process in the quiet stage. To account for the electrical potential data, two components need to be taken into account. In the quiet stage, the signal was comparable to surface tension, and the main contribution would result from the electrical double layer formed at the interface by charged surfactants. In the convective stage, the electrical potential was furthermore related to the velocity of the fluid in the aqueous layer. Perturbations of the charge distribution in the Gouy-Chapman layer due to tangential flows could be at the origin of the phenomenon.

Degradation of 2,4-dihydroxibenzoic acid by vacuum UV process in aqueous solution: kinetic, identification of intermediates and reaction pathway.

2,4-Dihydroxybenzoic acid (2,4-DHBA) is found frequently as a pollutant in natural waters and represents a threat to water quality because it is a precursor to the formation of quinones which are highly toxic. The degradation of 2,4-DHBA using the vacuum UV photolysis of water has been investigated. Irradiation was carried out in an annular photoreactor equipped with a Xe-excimer lamp situated in the centre and emitting at 172 nm. The degradation kinetic followed a pseudo first order and the reaction has been found to be very heterogeneous, especially at low concentration. Impacts of oxygen or temperature have also been investigated but no effect has been shown. LC-MS and HPLC-UV combined with other analytical techniques allowed the identification of the formation of trihydroxybenzoïc acids and trihydroxybenzenes which underwent a ring opening, conducting to the formation of aliphatic products named α, ß, δ and γ. These products were in turn degraded successively into maleïc acid, malic and succinic acid, malonic acid, glyoxalic acid and oxalic acid before reaching the complete mineralization in about 180 min. The proposed reaction pathway has shown to be very different from the one observed for the TiO(2) photocatalysis which involves only holes (h(+)) without any formation of aromatic intermediates. The different behaviours of 2,4-DHBA towards the h(+) and HO make it a good probe to identify involved entities.

Antischistosomal activity of trioxaquines: in vivo efficacy and mechanism of action on Schistosoma mansoni.

Schistosomiasis is among the most neglected tropical diseases, since its mode of spreading tends to limit the contamination to people who are in contact with contaminated waters in endemic countries. Here we report the in vitro and in vivo anti-schistosomal activities of trioxaquines. These hybrid molecules are highly active on the larval forms of the worms and exhibit different modes of action, not only the alkylation of heme. The synergy observed with praziquantel on infected mice is in favor of the development of these trioxaquines as potential anti-schistosomal agents.

Amphiphilic organic ion pairs in solution: a theoretical study.

The macroscopic manifestation of hydrophobic interactions for amphiphilic organic ion pairs (tetraalkylammonium-anion) has been shown experimentally by measuring their association constants and their affinity with the organic phase. Beyond a certain size, there is a direct relation between association constants and chain lengths in tetraalkylammonium ions. We propose to cast a bridge between these results and geometrical properties considered at the level of a single ion pair by means of quantum chemistry calculations performed on model systems: trimethylalkylammonium-pentyl sulfate instead of tetraalkylammonium-dodecyl sulfate. Two limiting cases are considered: head-to-head configurations, which yield an optimal electrostatic interaction between polar heads, and parallel configurations with a balance between electrostatic and hydrophobic interactions. All properties (geometries, complexation energies, and atomic charges) were obtained at the MP2 level of calculation, with water described by a continuum model (CPCM). Dispersion forces link hydrocarbon chains of tetraalkylammonium ions and pentyl sulfate, thus yielding (for the largest ion pairs) parallel configurations favored with respect to head-to-head geometries by solute-solvent electrostatic interactions. Given the small experimental association energies, we probe the accuracy limit of the MP2 and CPCM methods. However, clear trends are obtained as a function of chain length, which agree with the experimental observations. The calculated monotonic stabilization of ion pairs when the hydrocarbon chain increases in length is discussed in terms of electrostatic interactions (between ions and between ion pairs and water), dispersion forces, and cavitation energies.

Association, partition, and surface activity in biphasic systems displaying relaxation oscillations.

Several biphasic systems giving rise to periodical Marangoni instability have been analyzed from the point of view of the physicochemical properties of the involved compounds. In each case, the compound at the origin of the oscillatory behavior has been identified: the reactant cetyltrimethylammonium bromide (CTAB) for the CTAB/picric acid (PH) system and the product of reaction dodecyl sulfate tetraalkylammonium (TAADS) for the sodium dodecyl sulfate/tetraalkylammonium bromide (SDS/TAAB) system. The properties of the latter system have been varied progressively by increasing the chain length of the tetraalkylammonium ion. Oscillations were observed whichever the direction of transfer (from water to dichloromethane and from dichloromethane to water). The comparison of the dynamic interfacial tension, recorded during transfer, to equilibrium measurements shows that the instability is favored when partition is highly in favor of the organic phase. The main criteria for the appearance of the instability are a high surface activity and a low interfacial adsorption.

Determining the association constant and adsorption properties of ion pairs in water by fitting surface tension data.

Association constants and adsorption parameters of tetraalkylammoniumdodecyl sulfate (TAADS) ion pairs in water were determined. We have analyzed water/air surface tension measurements obtained for mixtures of sodium dodecyl sulfate (SDS) and tetraalkylammonium bromide of increasing chain lengths (TMAB, TEAB, TPAB, and TBAB). To reproduce the experimental isotherms, we coupled the association equilibrium of the ion pairs to the equations proposed by Fainerman and co-workers to model the adsorption of binary mixtures of surfactants (SDS and TAADS) with different molar areas at a nonideal surface layer. The parameters found showed that the model is not convenient to describe the effect of the addition of TMAB but a clear coherency was obtained for the three longer compounds. Ranging from TEADS to TBADS increasing hydrophobic interactions give rise to a higher associability but to a lower surface activity. Self-interactions coefficients extracted by the fitting procedure confirmed the importance of attractive interactions between the ion pairs. The calculated surface coverage showed that in every case the compound mainly adsorbed at the interface was the ion pair. For TBADS strong attractive interactions result in a phase transition at very low concentration.

Hydrogen peroxide evolution during V-UV photolysis of water.

Hydrogen peroxide evolution during the vacuum-ultraviolet (V-UV, 172 nm) photolysis of water is considerably affected by the presence of oxalic acid (employed as a model water pollutant) and striking differences are observed in the absence and in the presence of dioxygen.