Slaughterhouse by-products composting: can microorganisms inoculum addition mitigate final compost odor emission?

Small slaughterhouses generate biowaste, which for economic reasons, is generally destined for composting. Inoculating appropriate microorganisms can improve biodegradation efficiency and mitigate odor generation during the composting process and can give rise to composts with neutral or pleasant odors. Therefore, the aim of this study was to compare the odor intensity reduction of compost generated with and without a formulated inoculum (Saccharomyces cerevisiae, Bacillus subtilis, and Rhodopseudomonas palustris). A set of experimental data was collected and analyzed according to the German "Verein Deutscher Ingenieure" odor protocol. The results showed that adding microorganisms was effective in reducing unpleasant odors in all three composts generated from swine, cattle, and poultry slaughterhouse by-products during both summer and winter seasons. Additionally, soil odor was predominant in composts that were inoculated in the two tested seasons (i.e., summer and winter). On the other hand, composts without inoculation had odors similar to peat for swine compost, ammonia for cattle compost, and manure for poultry compost, regardless of the season tested. Overall, composting process with appropriate inoculum can help in the correct disposal of slaughterhouse wastes by transforming organic matter into composts, which can have economic and environmental value as a soil conditioner and/or fertilizer.

Using photocatalyzed-peroxonization to disinfect and denature genetic material of bacterial plasmids present in hospital wastewater.

The literature reports the presence of multiresistant microorganisms in wastewater discharged from municipal and hospital wastewater treatment plants (WWTPs). This has led to questions concerning the disinfection efficiency of the treatments applied. Thus, this study aimed to assess the efficiency of different chemical oxidation methods to disinfect and to degrade bacterial plasmids present in hospital wastewaters, to avoid the dispersion of antibiotic resistance genes in the environment. The methods tested were UV254nm alone or associated with an Ag or Ti-photocatalyst in photo-peroxonization (UV254 nm/H2O2/O3/Ag2O/Ag2CO3@PU or UV254 nm/H2O2/O3/TiO2@PU) under different pH conditions (4, 7, and 10). The application of plasmid DNA electrophoresis to hospital wastewater treated using an advanced oxidation process (AOP) achieved the total structural denaturation of microorganism plasmids at the three pH values tested. Also, UV254 nm alone was partially efficient in the disinfection of hospital wastewater. AOPs performed with the two functionalized catalysts resulted in 100% disinfection after 10 min at the three pH values tested. No intact plasmids were observed after 20 min of treatment with photocatalysis. This study could contribute to the development and improvement of wastewater treatment aimed at mitigating the spread of multiresistant microorganisms in the environment.

Antibiotic degradation and mineralization: efficiency increase on combining different chemical treatment processes.

The goal of this study was to assess the efficiency of antibiotic degradation applying different chemical treatment methods and their combinations. Thus, improvement in the efficiency of these methods when combined was quantified. The methods tested to degrade/mineralize the antibiotics amoxicillin (AMX) and ciprofloxacin (CIP) under different pH conditions (4, 7 and 10) were ultra-violet irradiation (UV254 nm), ultrasound (US), hydrogen peroxide (H2O2) and ozone (O3) alone and in combination. The results showed that individual methods were only partially efficient in the degradation/mineralization of antibiotics, except for ozonation at alkaline pH. In the combined methods, the best performance was obtained with US/UV/H2O2/O3 (pH 10, 20-min treatment), where the degradation rates for the antibiotics were 99.8% for CIP and 99.9% for AMX. For the mineralization efficiency the values obtained were 71.3% for CIP and 79.2% for AMX. The results of this study could contribute to the development and improvement of wastewater treatment aimed at avoiding the presence of residual antibiotics in the environment.

Development of a low-cost inoculum to improve composting of cattle slaughterhouse by-products.

The composting process is an option for acceptable environmental management of cattle slaughterhouse by-products. The goals of this article were (i) to make a low-cost inoculum using popular supermarket ingredients and microorganisms that are already present in the composting environment, and (ii) to compare the efficiency of the composting process with and without the application of formulated inoculum. Initially, a consortium of microorganisms already present in the composting environment (Saccharomyces cerevisiae, Bacillus subtilis, and Rhodopseudomonas palustris) was prepared in a low-cost culture medium for use as an inoculum for the composting process. The composting process with the addition of the inoculum was more efficient than the composting process without the inoculum, in terms of both the chemical composition and the process efficiency, but mainly in relation to the time required for composting, with the mean times for decay of 50% of the windrows' temperature (taking in to account the difference between internal and external windrow temperatures) being 96 days without inoculum and 65 days with inoculum. Thus, inoculum made with low-cost supermarket products reduced the composting time and yielded compost of better quality.

Degradation of recalcitrant textile azo-dyes by fenton-based process followed by biochar polishing.

The use of advanced oxidative processes (AOPs) is an efficient alternative for the treatment of textile wastewaters. The aim of this study was to assess the dye removal efficiency of a Fenton-based degradation process followed by a polishing step using biochar prepared from rice husk. Six recalcitrant textile dyes - Reactive Red 195 (D1), Synolon Brown S2 (D2), Orange Remazol RGB (D3), Yellow Synozol K3 (D4), Reactive Orange (D5), and Reactive Black 5 (D6) - were treated with Fenton and photo-Fenton processes (with and without biochar polishing) under optimized conditions. The results showed a general efficiency ranking: photo-Fenton + biochar ≈ Fenton + biochar > photo-Fenton ≈ Fenton. The Fenton process was also efficient for the regeneration of the dye-saturated biochar. The photo-Fenton + biochar process achieved the following color removal percentages: D1 (98.8%), D2 (99.7%), D3 (98.9%), D4 (96.3%), D5 (94.2%) and D6 (94.8%). This process was applied to a real conventionally-treated textile wastewater and analysis showed a reduction in BOD (87.5% degradation), COD (62.5% degradation) and color (93.5% mean removal). These results reveal the possibility for the reuse of the treated water for non-potable industrial uses, for example, floor washing or the cleaning of machines and toilet areas.

Using basic parameters to evaluate adsorption potential of alternative materials: example of amoxicillin adsorption by activated carbon produced from termite bio-waste.

The minimum set of parameters that can be used to assess the adsorption capacity of activated carbon (AC) produced from termite bio-waste was determined. Three types of AC were prepared: AC600 at 600 °C, MAC600 at the same temperature and impregnated with FeCl3, and AC800 at 800 °C. The influence of the solution pH on the adsorption, adsorption kinetics, isotherms and thermodynamic parameters was considered to characterize the amoxicillin (AMX) adsorption process. The AC materials had surface areas (m2 g-1) of approximately 248.8 for AC600, 501.6 for AC800 and 269.5 for MAC600, with point of zero charge (pHPZC) values of 8.3, 7.5 and 1.7, respectively. A time period of 30 min was chosen for the adsorption kinetics, which was best represented by the pseudo-first-order model for AC600, the intraparticle diffusion model for AC800 and the pseudo-second-order model for MAC600. Regarding the isotherms, a maximum adsorption of 23.4 mg g-1 was found for AC800. In general, the thermodynamic parameters demonstrated a non-spontaneous process. It seems that the medium conditions, the adsorbate and adsorbent characteristics, and the Gibbs free energy are the most important parameters to be considered in a preliminary assessment of the adsorption efficiency of specific adsorbent/adsorbate pairs.

Assessment of phytotoxicity and impact on the enzymatic activity of soil microorganisms caused by veterinary antibiotics used in Brazilian farms.

This work aimed to evaluate the impact of veterinary antibiotics on biomass phytoproductivity and soil enzyme activity. The soil was sampled in the city of Camboriú (state of SC, Brazil). The soil enzyme activity was assessed through hydrolysis of fluorescein diacetate (FDA), while phytotoxicity was tested using Lactuca sativa (lettuce). Results showed that the most appropriate exposure time to assess the impact of antibiotics on soil microbiology was 24 h, while the incubation time of 3 h was the most appropriate for FDA hydrolysis. Ampicillin and Amoxicillin at the tested concentrations did not interfere with the enzyme activity of the soil microbiota, while Oxytetracycline and Neomycin showed a significant reduction in soil enzyme activity. For the dry and wet biomass of lettuce, 2% Colistin and 1% Ampicillin were the treatments that reduced lettuce biomass. Hence, the use of excessive antibiotics in animal production may lead to environmental impacts and, in the future, to public health problems.

Use of brewing industry waste to produce carbon-based adsorbents: Paracetamol adsorption study.

This work aimed to produce activated carbon (AC) from brewing industry waste (the malt bagasse) to adsorb Paracetamol. Malt bagasse was characterized by moisture and ash contents and thermogravimetric analysis. Three types of AC were prepared: C400 (400 °C) and C500 (500 °C) under oxidizing atmosphere, and CN550 (550 °C) under nitrogen atmosphere. Some of these ACs were characterized by pH, point of zero charge (pHPZC), infrared spectroscopy, N2 adsorption-desorption isotherms, scanning electron microscopy, and temperature-programed desorption of CO2 and NH3. A pHPZC value < 7.0 and high density of acid sites were identified for CN550. Specific surface areas were between 192.5 and 364.0 m2.g-1. Adsorption kinetic studies were performed in a batch system with 50 mL of Paracetamol solution (100 mg.L-1) under pH 4 and 0.75 g of adsorbent (optimized conditions). The time to reach adsorption equilibrium was 20 min with 98.3% Paracetamol removal for CN550 AC. The pseudo-second order model and the Langmuir isotherm best fitted experimental data. Brewing industry waste can be used as a source of organic matter for AC production, since the percentage of Paracetamol removal in this study showed that CN550 AC presentes high adsorption efficiency and economically viable production.

Influence of desorption process and pH adjustement on the efficiency of O3, O3/H2O2 and O3/UV treatment of water and soil samples contaminated by crude petroleum.

The influence of the pH and the contaminant desorption/emulsification on ozone (O3), ozone-hydrogen peroxide (O3/H2O2) and ozone-photolysis (O3/UV) oxidation reactions were performed to treat crude petroleum (CP) contaminated soil and water samples. Oxidation efficiency is also related to both free radicals formation in reaction medium (which is dependent of the pH), and contaminant availability (which is dependent of the compounds solubilization or desorption processes). Thus, batch basic processes of O3/H2O2 or O3/UV were improved with sonication system and surfactant addition. In the case of O3/H2O2 process, the reactions were performed at adjusted (pH = 11) and natural pH (free pH= 4-5). The effectiveness of the improved advanced oxidation processes were evaluated through the time-course analysis of the chemical oxygen demand (COD), biochemical oxygen demand (BOD5), and total organic carbon (TOC) values. For both improved treatment processes, CP-contaminated water samples displayed higher values for TOC removal and BOD5/COD ratios than CP-contaminated soil samples. The O3/H2O2 process provided better results than the O3/UV process regarding degradation efficiency, but the former is associated with higher treatment costs due to H2O2 consumption. Overall, oxidation treatment processes increase their efficiencies when reactions are carried out associated with solubilization and desorption systems promoted by sonication/surfactant action.

A multi-parametric study of the interaction between the Parati river and Babitonga Bay in terms of water quality.

The Parati River contributes to the Babitonga Bay water complex, but the contents of the bay also influence the river during periods of inverted currents. In this study, the water quality along four stretches of the Parati River and Babitonga Bay was evaluated using chemical (physico-chemical and chromatographic analysis), microbiological (fluorescein diacetate hydrolysis) and ecotoxicological (Lumistox) methods to assess the reciprocal influence of the waters of this river-bay system. In addition, the most appropriate type of analysis for the monitoring of the estuarine region of the Parati River was identified. The results of six sampling campaigns showed that the type of contaminants and their levels varied temporally and spatially and thus the water quality also changed. Anthropogenic activity, such as banana cultivation and the release of sewage into the water system, is the primary cause of the contamination that affects the quality of the water in the Parati River estuary, which is a crucial ecological niche for the reproduction of various marine species. The ecotoxicity tests with Aliivibrio fischeri conducted to evaluate the water quality showed an integrative response, and the ecotoxicity data indicated that the Parati River does not have a significant influence on the water quality of Babitonga Bay.

Growth modeling of the green microalga Scenedesmus obliquus in a hybrid photobioreactor as a practical tool to understand both physical and biochemical phenomena in play during algae cultivation.

In recent years, numerous studies have justified the use of microalgae as a sustainable alternative for the generation of different types of fuels, food supplementation, and cosmetics, as well as bioremediation processes. To improve the cost/benefit ratio of microalgae mass production, many culture systems have been built and upgraded. Mathematical modeling the growth of different species in different systems has become an efficient and practical tool to understand both physical and biochemical phenomena in play during algae cultivation. In addition, growth modeling can guide design changes that lead to process optimization. In the present work, growth of the green microalga Scenedesmus obliquus was modeled in a hybrid photobioreactor that combines the characteristics of tubular photobioreactors (TPB) with thin-layer cascades (TLC). The system showed productivity greater than 8.0 g m-2 day-1 (dry mass) for CO2 -fed cultures, and the model proved to be an accurate representation of experimental data with R2 greater than 0.7 for all cases under variable conditions of temperature and irradiance to determine subsystem efficiency. Growth modeling also allowed growth prediction relative to the operating conditions of TLC, making it useful for estimating the system given other irradiance and temperature conditions, as well as other microalgae species.

Optimization of animal manure vermicomposting based on biomass production of earthworms and higher plants.

The goal of this study was to optimize the mixture of swine manure (SM) and cattle manure (CM) used in the vermicomposting process, seeking to increase the manure biodegradation rate and enhance the biomass production of both earthworms and higher plants. To achieve this goal, physico-chemical parameters were determined to assess the final compost quality after 50 days of vermicomposting. The different manure ratios used to produce the composts (C) were as follows (SM:CM, % m/m basis): C1 100:0, C2 (75:25), C3 (50:50), C4 (25:75), and C5 (0:100). In addition, the earthworm biomass and the phytoproductivity of lettuce (Lactuca sativa L.) plants grown in mixtures (1:1) of natural soil and the most viable vermicomposts were investigated. The C1 and C2 compost compositions were associated with high earthworm mortality rates. The C3 compost provided the highest mineral concentrations and C5 showed the highest lettuce yield (wet biomass). The results verify that stabilized cattle manure is an excellent substrate for the vermicomposting process and that fresh swine manure must be mixed with pre-stabilized cattle manure to ensure an optimized vermicomposting process, which must be controlled in terms of temperature and ammonia levels. It is concluded that small livestock farmers could add value to swine manure by applying the vermicomposting process, without the need for high investments and with a minimal requirement for management of the biodegradation process. These are important technical aspects to be considered when circular economy principles are applied to small farms.

Restoration of areas degraded by alluvial sand mining: use of soil microbiological activity and plant biomass growth to assess evolution of restored riparian vegetation.

River or alluvial sand mining is causing a variety of environmental problems in the Itajaí-açú river basin in Santa Catarina State (south of Brazil). When this type of commercial activity degrades areas around rivers, environmental restoration programs need to be executed. In this context, the aim of this study was to assess the evolution of a restored riparian forest based on data on the soil microbial activity and plant biomass growth. A reference site and three sites with soil degradation were studied over a 3-year period. Five campaigns were performed to determine the hydrolysis of the soil enzyme fluorescein diacetate (FDA), and the biomass productivity was determined at the end of the studied period. The variation in the enzyme activity for the different campaigns at each site was low, but this parameter did differ significantly according to the site. Well-managed sites showed the highest biomass productivity, and this, in turn, showed a strong positive correlation with soil enzyme activity. In conclusion, soil enzyme activity could form the basis for monitoring and the early prediction of the success of vegetal restoration programs, since responses at the higher level of biological organization take longer, inhibiting the assessment of the project within an acceptable time frame.

Genotoxicity assessment of particulate matter emitted from heavy-duty diesel-powered vehicles using the in vivo Vicia faba L. micronucleus test.

Diesel exhaust particulate matter (PM) can have an impact on the environment due to its chemical constitution. A large number of substances such as organic compounds, sulfates, nitrogen derivatives and metals are adsorbed to the particles and desorption of these contaminants could promote genotoxic effects. The objective of this study was to assess the in vivo genotoxicity profile of diesel exhaust PM from heavy-duty engines. Extracts were obtained through leaching with pure water and chemical extraction using three organic solvents (dichloromethane, hexane, and acetone). The in vivo Vicia faba micronucleus test (ISO 29200 protocol) was used to assess the environmental impact of the samples collected from diesel exhaust PM. The solid diesel PM (soot) dissolved in water, and the different extracts, showed positive results for micronucleus formation. After the addition of EDTA, the aqueous extracts did not show a genotoxic effect. The absence of metals in the organic solvent extract indicated that organic compounds also had a genotoxic effect, which was not observed for a similar sample cleaned in a C18 column. Thus, considering the ecological importance of higher plants in relation to ecosystems (in contrast to Salmonella spp., which are commonly used in mutagenicity studies), the Vicia micronucleus test was demonstrated to be appropriate for complementing prokaryotic or in vitro tests on diesel exhaust particulate matter included in risk assessments.

Genetic material present in hospital wastewaters: Evaluation of the efficiency of DNA denaturation by ozonolysis and ozonolysis/sonolysis treatments.

Hospital wastewater treatments must ensure that all genetic material is destroyed, since nuclear and extra-nuclear DNA can show antimicrobial resistance and contain recombinant genes, which promote vertical and/or horizontal gene transfer, amplifying the current problem of the emergence of antibiotic-resistant microorganisms. In this study, we investigated whether ozonolysis or ozonolysis/sonolysis in combination can denature genetic material, i.e., destroy the integrity of DNA molecules, present in hospital wastewaters. To achieve this goal, hospital wastewaters were treated by ozonolysis or ozonolysis/sonolysis in combination (at 70 and 100 W L(-1)) and both raw and treated wastewaters were analyzed in terms of disinfection and DNA denaturation efficiency quantified by viable cell counts and by agarose gel electrophoresis. In the ozonolysis treatment, the agarose gel electrophoresis technique showed that the ozone-treated samples contained DNA molecules, while combined ozonolysis/sonolysis destroyed the DNA in a power density-dependent manner (64% at 70 W L(-1) and 81% at 100 W L(-1)). Care must be taken by environmental managers to distinguish disinfection processes from DNA denaturation processes, since these two terms are not synonymous.

Investigation of differences in sensitivity between 3 strains of Daphnia magna (crustacean Cladocera) exposed to malathion (organophosphorous pesticide).

Acute and chronic ecotoxic effects of organophosphorous insecticide malathion (Fyfanon 50 EC 500 g L(-1)) were investigated on three strains of Daphnia magna. The nominal effective concentrations immobilizing 50% (EC50) of Daphnia after 24 and 48 h were 0.53 and 0.36 µg L(-1), 0.70 and 0.44 µg L(-1), and 0.75 and 0.46 µg L(-1) for the strains 1, 2, and 3 respectively. There was an increase in malathion ecotoxicity with time of exposure as confirmed by chronic studies. In fact, after 21 days of exposure, significant effects on survival (lowest observed effect concentration or LOECs) were recorded at malathion concentrations of 22, 220 and 230 ng L(-1) for strains 1, 2 and 3 respectively. Other endpoints were also examined, including reproduction (with different parameters), body length and embryo toxicity. ICs10 and ICs20 were calculated for these different parameters. ICs10 ranged from 4.7 to more than 220 ng L(-1) for the three tested strains. The most sensitive parameter was the number of neonates per adult (ICs10 = 4.7 and 10.8 ng L(-1) for strains 1 and 2 respectively) or the number of broods (IC10 = 10 ng L(-1) for strain 3). Moreover, an increase in embryo development abnormalities was observed at the two highest tested malathion concentrations. Abnormalities comprised undeveloped second antennae, curved or unextended shell spines, and curved post-abdomen spines in live neonates. Results suggest that malathion could act as an endocrine disruptor in D. magna as it interferes with development. It also induces a significant decrease in acetylcholinesterase (AChE) activities for the three strains. Both strains 2 and 3 seemed more sensitive (LOECs = 60 ng L(-1)) than strain 1 (LOEC = 120 ng L(-1)). Our results suggest that the AChE activity response can also be used as a biomarker of inter-strain (or inter-clonal) susceptibility (i.e. strain (or clone)-specific response).

Eco(geno)toxicity of the new commercial insecticide Platinum Neo, a mixture of the neonicotinoid Thiamethoxam and the pyrethroid Lambda-Cyhalothrin.

New mixtures of pesticides are being placed on the market to increase the spectrum of phytosanitary action. Thus, the eco(geno)toxic effects of the new commercial mixture named Platinum Neo, as well as its constituents the neonicotinoid Thiamethoxam and the pyrethroid Lambda-Cyhalothrin, were investigated using the species Daphnia magna, Raphidocelis subcapitata, Danio rerio, and Allium cepa L. The lowest- and no-observed effect concentration (LOEC and NOEC) were measured in ecotoxicological tests. While Thiamethoxam was ecotoxic at ppm level, Lambda-Cyhalothrin and Platinum Neo formulation were ecotoxic at ppb level. The mitotic index (MI), chromosomal aberrations and micronucleus [MN] frequency were measured as indicators of phytogenotoxicity in A. cepa plants exposed for 12 hours to the different insecticides and their mixture under different dilutions. There were significant alterations in the MI and MN frequency in comparison with the A. cepa negative control group, with Thiamethoxam, Lambda-Cyhalothrin, and Platinum Neo treatments all significantly reducing MI and increasing MN frequency. Thus, MI reduction was found at 13.7 mg L-1 for Thiamethoxam, 0.8 µg L-1 for Lambda-Cyahalothrin, and 2.7:2 µg L-1 for Platinum Neo, while MN induction was not observed at 14 mg L-1 for Thiamethoxam, 0.8 µg L-1 for Lambda-Cyahalothrin, and 1.4:1 µg L-1 for Platinum Neo. The insecticide eco(geno)toxicity hierarchy was Platinun Neo > Lambda-Cyhalothrin > Thiamethoxam, and the organism sensitivity hierarchy was daphnids > fish > algae >A. cepa. Eco(geno)toxicity studies of new pesticide mixtures can be useful for management, risk assessment, and avoiding impacts of these products on living beings.

Arsenate (As V) in water: quantitative sensitivity relationships among biomarker, ecotoxicity and genotoxicity endpoints.

It is useful to test ecotoxicity and genotoxicity endpoints in the environmental impact assessment. Here, we compare and discuss ecotoxicity and genotoxicity effects in organisms in response to exposure to arsenate (As V) in solution. Eco(geno)toxicity responses in Aliivibrio fischeri, Lytechinus variegatus, Daphnia magna, Skeletonema costatum and Vicia faba were analyzed by assessing different endpoints: biomass growth, peroxidase activity, mitotic index, micronucleus frequency, and lethality in accordance with the international protocols. Quantitative sensitivity relationships (QSR) between these endpoints were established in order to rank endpoint sensitivity. The results for the QSR values based on the lowest observed effect concentration (LOEC) ratios varied from 2 (for ratio of root peroxidase activity to leaf peroxidase activity) to 2286 (for ratio of higher plant biomass growth to root peroxidase activity). The QSR values allowed the following sensitivity ranking to be established: higher plant enzymatic activity>daphnids≈echinoderms>bacteria≈algae>higher plant biomass growth. The LOEC values for the mitotic index and micronucleus frequency (LOEC=0.25mgAsL(-1)) were similar to the lowest LOEC values observed in aquatic organisms. This approach to the QSR of different endpoints could form the basis for monitoring and predicting early effects of pollutants before they give rise to significant changes in natural community structures.

Sensitivity of different aquatic bioassays in the assessment of a new natural formicide.

Agrochemicals have the potential to cause deleterious effects on living organisms and therefore they must be subjected to various (eco)toxicological studies and monitoring programs in order to protect human health and the environment. The aim of this study was to assess the ecotoxicity of a new natural formicide with a battery of three classical and three ecotox-kit tests. The former tests were performed with Aliivibrio fischeri bacteria (Lumistox test), the cladoceran Daphnia magna and Pseudokirchneriella subcapitata algae, and the latter with Thamnotoxkit F(TM) (Thamnocephalus platyurus), Ostracodtoxkit F® (Heterocypris incongruens) and LuminoTox (photosynthetic enzyme complexes). In the range of formicide concentrations tested (from 0.06 to 2.0 g L(-1)), the measurement endpoint values varied from 0.79 g L(-1) for the algal test to > 2 g L(-1) for the LuminoTox and Ostracodtoxkit F® tests. Hierarchical sensitivity ranking based on the no-observed effect concentration (NOEC) values established to assess the formicide ecotoxicity was as follows: algal growth inhibition test ≈ daphnid immobilization test ≈ bacterial luminescence inhibition test > Thamnotoxkit F™ > LuminoTox > Ostracodtoxkit F®. Overall, results from the battery of bioassays showed that this formicide preparation presents low ecotoxicity as compared to the aquatic ecotoxicity of presently commercialized formicides. In conclusion, classical aquatic bioassays are more sensitive than ecotox-kit tests in the assessment and monitoring of the new natural formicide.

Development and application of a methodology for a clean development mechanism to avoid methane emissions in closed landfills.

In Brazil, Solid Waste Disposal Sites have operated without consideration of environmental criteria, these areas being characterized by methane (CH4) emissions during the anaerobic degradation of organic matter. The United Nations organization has made efforts to control this situation, through the United Nations Framework Convention on Climate Change (UNFCCC) and the Kyoto Protocol, where projects that seek to reduce the emissions of greenhouse gases (GHG) can be financially rewarded through Certified Emission Reductions (CERs) if they respect the requirements established by the Clean Development Mechanism (CDM), such as the use of methodologies approved by the CDM Executive Board (CDM-EB). Thus, a methodology was developed according to the CDM standards related to the aeration, excavation and composting of closed Municipal Solid Waste (MSW) landfills, which was submitted to CDM-EB for assessment and, after its approval, applied to a real case study in Maringá City (Brazil) with a view to avoiding negative environmental impacts due the production of methane and leachates even after its closure. This paper describes the establishment of this CDM-EB-approved methodology to determine baseline emissions, project emissions and the resultant emission reductions with the application of appropriate aeration, excavation and composting practices at closed MSW landfills. A further result obtained through the application of the methodology in the landfill case study was that it would be possible to achieve an ex-ante emission reduction of 74,013 tCO2 equivalent if the proposed CDM project activity were implemented.